arm64: dts: qcom: drop redundant line breaks

Remove trailing, redundant line breaks.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230306081430.28491-2-krzysztof.kozlowski@linaro.org

arch/arm64/boot/dts/qcom/apq8096-db820c.dts

@@ -1137,7 +1137,6 @@ &usb3phy {
 
 	vdda-phy-supply = <&vreg_l28a_0p925>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
-
 };
 
 &venus {

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -2180,7 +2180,6 @@ modem_alert0: trip-point0 {
 				};
 			};
 		};
-
 	};
 
 	timer {

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -1882,7 +1882,6 @@ pcie0: pcie@600000 {
 						"cfg",
 						"bus_master",
 						"bus_slave";
-
 			};
 
 			pcie1: pcie@608000 {
@@ -3471,7 +3470,6 @@ q6routing: routing {
 						};
 					};
 				};
-
 			};
 		};
 

arch/arm64/boot/dts/qcom/sc7180.dtsi

@@ -3027,7 +3027,6 @@ opp-460000000 {
 						required-opps = <&rpmhpd_opp_nom>;
 					};
 				};
-
 			};
 
 			dsi0: dsi@ae94000 {

arch/arm64/boot/dts/qcom/sc7280.dtsi

@@ -943,7 +943,6 @@ opp-384000000 {
 					opp-avg-kBps = <390000 0>;
 				};
 			};
-
 		};
 
 		gpi_dma0: dma-controller@900000 {
@@ -3298,7 +3297,6 @@ opp-202000000 {
 					opp-avg-kBps = <200000 0>;
 				};
 			};
-
 		};
 
 		usb_1_hsphy: phy@88e3000 {
@@ -3767,7 +3765,6 @@ opp-460000048 {
 					required-opps = <&rpmhpd_opp_turbo>;
 				};
 			};
-
 		};
 
 		videocc: clock-controller@aaf0000 {

arch/arm64/boot/dts/qcom/sc8280xp.dtsi

@@ -2781,7 +2781,6 @@ data-pins {
 					drive-strength = <2>;
 					slew-rate = <1>;
 					bias-bus-hold;
-
 				};
 			};
 
@@ -4413,7 +4412,6 @@ opp-810000000 {
 						required-opps = <&rpmhpd_opp_nom>;
 					};
 				};
-
 			};
 
 			mdss1_dp1: displayport-controller@22098000 {

arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts

@@ -395,7 +395,6 @@ vreg_bob: bob {
 			regulator-enable-ramp-delay = <500>;
 		};
 	};
-
 };
 
 &gcc {

arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts

@@ -45,7 +45,6 @@ &sound {
 			"AMIC3", "MIC BIAS4",
 			"AMIC4", "MIC BIAS1",
 			"AMIC5", "MIC BIAS3";
-
 };
 
 /*

arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts

@@ -233,7 +233,6 @@ pm6150l_l6: ldo6 {
 			regulator-allow-set-load;
 			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
-
 		};
 
 		pm6150l_l7: ldo7 {
@@ -255,7 +254,6 @@ pm6150l_l9: ldo9 {
 			regulator-allow-set-load;
 			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
-
 		};
 
 		pm6150l_l10: ldo10 {

arch/arm64/boot/dts/qcom/sm6350.dtsi

@@ -176,7 +176,6 @@ L2_500: l2-cache {
 				cache-level = <2>;
 				next-level-cache = <&L3_0>;
 			};
-
 		};
 
 		CPU6: cpu@600 {
@@ -888,7 +887,6 @@ i2c10: i2c@990000 {
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				status = "disabled";
 			};
-
 		};
 
 		config_noc: interconnect@1500000 {

arch/arm64/boot/dts/qcom/sm6375.dtsi

@@ -139,7 +139,6 @@ L2_500: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
 			};
-
 		};
 
 		CPU6: cpu@600 {

arch/arm64/boot/dts/qcom/sm8150.dtsi

@@ -92,7 +92,6 @@ L2_100: l2-cache {
 				cache-level = <2>;
 				next-level-cache = <&L3_0>;
 			};
-
 		};
 
 		CPU2: cpu@200 {

arch/arm64/boot/dts/qcom/sm8250.dtsi

@@ -247,7 +247,6 @@ L2_500: l2-cache {
 				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
-
 		};
 
 		CPU6: cpu@600 {
@@ -2428,7 +2427,6 @@ data-pins {
 					drive-strength = <2>;
 					slew-rate = <1>;
 					bias-bus-hold;
-
 				};
 			};
 
@@ -2447,7 +2445,6 @@ data-pins {
 					drive-strength = <2>;
 					input-enable;
 					bias-pull-down;
-
 				};
 			};
 
@@ -3022,7 +3019,6 @@ funnel_swao_in_funnel_merg: endpoint {
 					};
 				};
 			};
-
 		};
 
 		etf@6b05000 {

arch/arm64/boot/dts/qcom/sm8350-hdk.dts

@@ -678,7 +678,6 @@ wake-pins {
 			bias-pull-up;
 		};
 	};
-
 };
 
 &uart2 {

arch/arm64/boot/dts/qcom/sm8350.dtsi

@@ -155,7 +155,6 @@ L2_500: l2-cache {
 			      cache-level = <2>;
 			      next-level-cache = <&L3_0>;
 			};
-
 		};
 
 		CPU6: cpu@600 {

arch/arm64/boot/dts/qcom/sm8450-hdk.dts

@@ -377,7 +377,6 @@ vreg_l3h_0p91: ldo3 {
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
-
 	};
 
 	regulators-3 {

arch/arm64/boot/dts/qcom/sm8450-qrd.dts

@@ -282,7 +282,6 @@ vreg_l3h_0p91: ldo3 {
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
-
 	};
 
 	regulators-3 {

arch/arm64/boot/dts/qcom/sm8450.dtsi

@@ -154,7 +154,6 @@ L2_500: l2-cache {
 			      cache-level = <2>;
 			      next-level-cache = <&L3_0>;
 			};
-
 		};
 
 		CPU6: cpu@600 {
@@ -2762,7 +2761,6 @@ dpu_intf2_out: endpoint {
 							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
-
 				};
 
 				mdp_opp_table: opp-table {
@@ -3569,7 +3567,6 @@ qup_uart20_default: qup-uart20-default-state {
 				pins = "gpio76", "gpio77", "gpio78", "gpio79";
 				function = "qup20";
 			};
-
 		};
 
 		lpass_tlmm: pinctrl@3440000 {