Commit e1aaf89a authored by Cooper Jr., Franklin's avatar Cooper Jr., Franklin Committed by Thierry Reding

pwm: pwm-tiehrpwm: Update DT binding document to use generic node name

Now that the node name has been changed from ehrpwm to pwm the document
should show this proper usage. Also change the unit address in the example
from 0 to the proper physical address value that should be used.
Signed-off-by: default avatarFranklin S Cooper Jr <fcooper@ti.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarThierry Reding <thierry.reding@gmail.com>
parent 1a695a90
...@@ -15,14 +15,14 @@ Optional properties: ...@@ -15,14 +15,14 @@ Optional properties:
Example: Example:
ehrpwm0: ehrpwm@0 { /* EHRPWM on am33xx */ ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */
compatible = "ti,am33xx-ehrpwm"; compatible = "ti,am33xx-ehrpwm";
#pwm-cells = <3>; #pwm-cells = <3>;
reg = <0x48300200 0x100>; reg = <0x48300200 0x100>;
ti,hwmods = "ehrpwm0"; ti,hwmods = "ehrpwm0";
}; };
ehrpwm0: ehrpwm@0 { /* EHRPWM on da850 */ ehrpwm0: pwm@300000 { /* EHRPWM on da850 */
compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>; #pwm-cells = <3>;
reg = <0x300000 0x2000>; reg = <0x300000 0x2000>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment