[ARM PATCH] 1794/1: S3C2410 - arch/arm/kernel patches [ repost 1791/1 ]

Patch from Ben Dooks

arch/arm/kernel patch for S3C2410 support

 - default configurations for S3C2410
 - build changes for S3C2410
 - IRQ support for kernel entry
 - debug serial support

arch/arm/Kconfig

@@ -138,6 +138,13 @@ config ARCH_SHARK
 config ARCH_OMAP
 	bool "TI OMAP"
 
+config ARCH_S3C2410
+	bool "Samsung S3C2410"
+	help
+	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
+	  BAST (http://www.simtec.co.uk/products/EB110ITX/), the IPAQ 1940 or
+	  the Samsung SMDK2410 development board (and derviatives).
+
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -156,6 +163,8 @@ source "arch/arm/mach-sa1100/Kconfig"
 
 source "arch/arm/mach-omap/Kconfig"
 
+source "arch/arm/mach-s3c2410/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
@@ -724,6 +733,18 @@ config DEBUG_LL
 	  in the kernel.  This is helpful if you are debugging code that
 	  executes before the console is initialized.
 
+config DEBUG_ICEDCC
+	bool "Kernel low-level debugging via EmbeddedICE DCC channel"
+	depends on DEBUG_LL
+	help
+	  Say Y here if you want the debug print routines to direct their
+	  output to the EmbeddedICE macrocell's DCC channel using
+	  co-processor 14. This is known to work on the ARM9 style ICE
+	  channel.
+
+	  It does include a timeout to ensure that the system does not
+	  totally freeze when there is nothing connected to read.
+
 config DEBUG_DC21285_PORT
 	bool "Kernel low-level debugging messages via footbridge serial port"
 	depends on DEBUG_LL && FOOTBRIDGE
@@ -741,6 +762,23 @@ config DEBUG_CLPS711X_UART2
 	  output to the second serial port on these devices.  Saying N will
 	  cause the debug messages to appear on the first serial port.
 
+config DEBUG_S3C2410_PORT
+	depends on DEBUG_LL && ARCH_S3C2410
+	bool "Kernel low-level debugging messages via S3C2410 UART"
+	help
+	  Say Y here if you want debug print routines to go to one of the
+	  S3C2410 internal UARTs. The chosen UART must have been configured
+	  before it is used.
+
+config DEBUG_S3C2410_UART
+	int
+	depends on DEBUG_LL && ARCH_S3C2410
+	default "0"
+	help
+	  Choice for UART for kernel low-level using S3C2410 UARTS,
+	  should be between zero and two. The port must have been
+	  initalised by the boot-loader before use.
+
 endmenu
 
 source "security/Kconfig"

arch/arm/Makefile

@@ -93,6 +93,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET)   := 0xc0008000
  machine-$(CONFIG_ARCH_IOP3XX)	   := iop3xx
  machine-$(CONFIG_ARCH_ADIFCC)	   := adifcc
  machine-$(CONFIG_ARCH_OMAP)	   := omap
+ machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410
 
 TEXTADDR := $(textaddr-y)
 ifeq ($(incdir-y),)

arch/arm/configs/bast_defconfig

+#
+# Automatically generated make config: don't edit
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_STANDALONE=y
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_ADIFCC is not set
+# CONFIG_ARCH_ANAKIN is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+CONFIG_ARCH_S3C2410=y
+
+#
+# CLPS711X/EP721X Implementations
+#
+
+#
+# Epxa10db
+#
+
+#
+# Footbridge Implementations
+#
+
+#
+# IOP3xx Implementation Options
+#
+# CONFIG_ARCH_IOP310 is not set
+# CONFIG_ARCH_IOP321 is not set
+
+#
+# IOP3xx Chipset Features
+#
+
+#
+# Intel PXA250/210 Implementations
+#
+
+#
+# SA11x0 Implementations
+#
+
+#
+# S3C2410 Implementations
+#
+CONFIG_ARCH_BAST=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# General setup
+#
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+# CONFIG_HOTPLUG is not set
+
+#
+# At least one math emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Generic Driver Options
+#
+# CONFIG_PM is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_ARTHUR is not set
+CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+CONFIG_PARPORT_PC_CML1=y
+# CONFIG_PARPORT_SERIAL is not set
+CONFIG_PARPORT_PC_FIFO=y
+CONFIG_PARPORT_PC_SUPERIO=y
+# CONFIG_PARPORT_ARC is not set
+CONFIG_PARPORT_OTHER=y
+CONFIG_PARPORT_1284=y
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_CONCAT is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_EDB7312 is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_PARIDE is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_INET_ECN is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_IPV6 is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IPV6_SCTP__=y
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_SMC91X is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_SHAPER is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# Bluetooth support
+#
+# CONFIG_BT is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDISK_STROKE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IDE_TASKFILE_IO is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_BLK_DEV_IDE_BAST=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_DMA_NONPCI is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# I2O device support
+#
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN_BOOL is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_TSLIBDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_DIGI is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_MULTIPORT is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_S3C2410=y
+CONFIG_SERIAL_S3C2410_CONSOLE=y
+# CONFIG_SERIAL_DZ is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT=256
+CONFIG_PRINTER=y
+# CONFIG_LP_CONSOLE is not set
+CONFIG_PPDEV=y
+# CONFIG_TIPAR is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_PHILIPSPAR is not set
+# CONFIG_SCx200_ACB is not set
+
+#
+# I2C Hardware Sensors Chip support
+#
+CONFIG_I2C_SENSOR=m
+# CONFIG_SENSORS_ADM1021 is not set
+CONFIG_SENSORS_EEPROM=m
+# CONFIG_SENSORS_IT87 is not set
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM85=m
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+
+#
+# L3 serial bus support
+#
+# CONFIG_L3 is not set
+
+#
+# Mice
+#
+# CONFIG_BUSMOUSE is not set
+# CONFIG_QIC02_TAPE is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_DEVFS_FS is not set
+CONFIG_DEVPTS_FS=y
+# CONFIG_DEVPTS_FS_XATTR is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS_FS=y
+CONFIG_JFFS_FS_VERBOSE=0
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_NAND is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+# CONFIG_EXPORTFS is not set
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_GSS is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ACORN_PARTITION=y
+CONFIG_ACORN_PARTITION_CUMANA=y
+CONFIG_ACORN_PARTITION_EESOX=y
+CONFIG_ACORN_PARTITION_ICS=y
+CONFIG_ACORN_PARTITION_ADFS=y
+CONFIG_ACORN_PARTITION_POWERTEC=y
+CONFIG_ACORN_PARTITION_RISCIX=y
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_NEC98_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+CONFIG_NLS=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP is not set
+
+#
+# Console Switches
+#
+# CONFIG_SWITCHES is not set
+
+#
+# USB support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# Kernel hacking
+#
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_PRINTK=y
+CONFIG_DEBUG_S3C2410_PORT=y
+CONFIG_DEBUG_S3C2410_UART=0
+
+#
+# Security options
+#
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_CRC32=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y

arch/arm/configs/s3c2410_defconfig

+#
+# Automatically generated make config: don't edit
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_STANDALONE=y
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_ADIFCC is not set
+# CONFIG_ARCH_ANAKIN is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+CONFIG_ARCH_S3C2410=y
+
+#
+# CLPS711X/EP721X Implementations
+#
+
+#
+# Epxa10db
+#
+
+#
+# Footbridge Implementations
+#
+
+#
+# IOP3xx Implementation Options
+#
+# CONFIG_ARCH_IOP310 is not set
+# CONFIG_ARCH_IOP321 is not set
+
+#
+# IOP3xx Chipset Features
+#
+
+#
+# Intel PXA250/210 Implementations
+#
+
+#
+# SA11x0 Implementations
+#
+
+#
+# S3C2410 Implementations
+#
+CONFIG_ARCH_BAST=y
+CONFIG_ARCH_H1940=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# General setup
+#
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+# CONFIG_HOTPLUG is not set
+
+#
+# At least one math emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Generic Driver Options
+#
+# CONFIG_PM is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_ARTHUR is not set
+CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+CONFIG_PARPORT_PC_CML1=y
+# CONFIG_PARPORT_SERIAL is not set
+CONFIG_PARPORT_PC_FIFO=y
+CONFIG_PARPORT_PC_SUPERIO=y
+# CONFIG_PARPORT_ARC is not set
+CONFIG_PARPORT_OTHER=y
+CONFIG_PARPORT_1284=y
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_CONCAT is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_EDB7312 is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_PARIDE is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_INET_ECN is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_IPV6 is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IPV6_SCTP__=y
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_SMC91X is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_SHAPER is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# Bluetooth support
+#
+# CONFIG_BT is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDISK_STROKE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IDE_TASKFILE_IO is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_BLK_DEV_IDE_BAST=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_DMA_NONPCI is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# I2O device support
+#
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN_BOOL is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_TSLIBDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_DIGI is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_MULTIPORT is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_S3C2410=y
+CONFIG_SERIAL_S3C2410_CONSOLE=y
+CONFIG_SERIAL_BAST_SIO=y
+# CONFIG_SERIAL_DZ is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT=256
+CONFIG_PRINTER=y
+# CONFIG_LP_CONSOLE is not set
+CONFIG_PPDEV=y
+# CONFIG_TIPAR is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_PHILIPSPAR is not set
+# CONFIG_SCx200_ACB is not set
+
+#
+# I2C Hardware Sensors Chip support
+#
+CONFIG_I2C_SENSOR=m
+# CONFIG_SENSORS_ADM1021 is not set
+CONFIG_SENSORS_EEPROM=m
+# CONFIG_SENSORS_IT87 is not set
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM85=m
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+
+#
+# L3 serial bus support
+#
+# CONFIG_L3 is not set
+
+#
+# Mice
+#
+# CONFIG_BUSMOUSE is not set
+# CONFIG_QIC02_TAPE is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_DEVFS_FS is not set
+CONFIG_DEVPTS_FS=y
+# CONFIG_DEVPTS_FS_XATTR is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS_FS=y
+CONFIG_JFFS_FS_VERBOSE=0
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_NAND is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+# CONFIG_EXPORTFS is not set
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_GSS is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_NEC98_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+CONFIG_NLS=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP is not set
+
+#
+# Console Switches
+#
+# CONFIG_SWITCHES is not set
+
+#
+# USB support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# Kernel hacking
+#
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_PRINTK=y
+# CONFIG_DEBUG_ICEDCC is not set
+CONFIG_DEBUG_S3C2410_PORT=y
+CONFIG_DEBUG_S3C2410_UART=0
+
+#
+# Security options
+#
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_CRC32=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y

arch/arm/kernel/debug.S

@@ -44,6 +44,34 @@
 		beq	1001b
 		.endm
 
+#elif defined(CONFIG_DEBUG_ICEDCC)
+		@@ debug using ARM EmbeddedICE DCC channel
+		.macro	addruart, rx
+		.endm
+
+		.macro	senduart, rd, rx
+		mcr	p14, 0, \rd, c1, c0, 0
+		.endm
+
+		.macro	busyuart, rd, rx
+1001:
+		mrc	p14, 0, \rx, c0, c0, 0
+		tst	\rx, #2
+		beq	1001b
+
+		.endm
+
+		.macro	waituart, rd, rx
+		mov	\rd, #0x2000000
+1001:
+		subs	\rd, \rd, #1
+		bmi	1002f
+		mrc	p14, 0, \rx, c0, c0, 0
+		tst	\rx, #2
+		bne	1001b
+1002:
+		.endm
+
 #elif defined(CONFIG_ARCH_EBSA110)
 		.macro	addruart,rx
 		mov	\rx, #0xf0000000
@@ -462,6 +490,66 @@
 		tst	\rd, #0x10
 		beq	1001b
 		.endm
+
+#elif defined(CONFIG_ARCH_S3C2410)
+#include <asm/arch/map.h>
+#include <asm/arch/regs-serial.h>
+
+		.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C2410_PA_UART
+		ldrne	\rx, = S3C2410_VA_UART
+#if CONFIG_DEBUG_S3C2410_UART != 0
+		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C2410_UART)
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, # S3C2410_UTXH ]
+		.endm
+
+		.macro	busyuart, rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
+		beq	1001f				@
+		@ FIFO enabled...
+1003:
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		tst	\rd, #S3C2410_UFSTAT_TXFULL
+		bne	1003b
+		b	1002f
+
+1001:
+		@ busy waiting for non fifo
+		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		tst	\rd, #S3C2410_UTRSTAT_TXFE
+		beq	1001b
+
+1002:		@ exit busyuart
+		.endm
+
+		.macro	waituart,rd,rx
+
+		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
+		beq	1001f				@
+		@ FIFO enabled...
+1003:
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ands	\rd, \rd, #15<<S3C2410_UFSTAT_TXSHIFT
+		bne	1003b
+		b	1002f
+
+1001:
+		@ idle waiting for non fifo
+		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		tst	\rd, #S3C2410_UTRSTAT_TXFE
+		beq	1001b
+
+1002:		@ exit busyuart
+		.endm
+
 #else
 #error Unknown architecture
 #endif

arch/arm/kernel/entry-armv.S

@@ -635,6 +635,129 @@ ENTRY(soft_irq_mask)
 		.macro	irq_prio_table
 		.endm
 
+#elif defined(CONFIG_ARCH_S3C2410)
+		/* S3C2410X IRQ Handler, <ben@simtec.co.uk> */
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+30000:
+		mov	\tmp, #S3C2410_VA_IRQ
+		ldr	\irqnr, [ \tmp, #0x14 ]		@ get irq no
+		teq	\irqnr, #4
+		teqne	\irqnr, #5
+		beq	1002f				@ external irq reg
+		teq	\irqnr, #16
+		beq	1003f				@ lcd controller
+
+		@ debug check to see if interrupt reported is the same
+		@ as the offset....
+
+		teq	\irqnr, #0
+		beq	20002f
+		ldr	\irqstat, [ \tmp, #0x10 ]	@ INTPND
+		mov	\irqstat, \irqstat, lsr \irqnr
+		tst	\irqstat, #1
+		bne	20002f
+
+#if 1
+		stmfd	r13!, { r0 - r4 , r14 }
+		ldr	r1,	[ \tmp, #0x14 ]		@ intoffset
+		ldr	r2,	[ \tmp, #0x10 ]		@ INTPND
+		ldr	r3,	[ \tmp, #0x00 ]		@ SRCPND
+		adr	r0, 20003f
+		bl	printk
+		b	20004f
+#endif
+20003:
+		.ascii	"<7>irq: err - bad offset %d, intpnd=%08x, srcpnd=%08x\n"
+		.byte	0
+		.align	4
+20004:
+		mov	r1, #1
+		mov	\tmp, #S3C2410_VA_IRQ
+		ldmfd	r13!, { r0 - r4 , r14 }
+
+		@ try working out interript number for ourselves
+		mov	\irqnr, #0
+		ldr	\irqstat, [ \tmp, #0x10 ]	@ INTPND
+10021:
+		movs	\irqstat, \irqstat, lsr#1
+		bcs	30000b		@ try and re-start the proccess
+		add	\irqnr, \irqnr, #1
+		cmp	\irqnr, #32
+		ble	10021b
+
+		@ found no interrupt, set Z flag and leave
+		movs	\irqnr, #0
+		b	1001f
+
+20005:
+20002:		@ exit
+		@ we base the s3c2410x interrupts at 16 and above to allow
+		@ isa peripherals to have their standard interrupts, also
+		@ ensure that Z flag is un-set on exit
+
+		@ note, we cannot be sure if we get IRQ_EINT0 (0) that
+		@ there is simply no interrupt pending, so in all other
+		@ cases we jump to say we have found something, otherwise
+		@ we check to see if the interrupt really is assrted
+		adds	\irqnr, \irqnr, #IRQ_EINT0
+		teq	\irqnr, #IRQ_EINT0
+		bne	1001f				@ exit
+		ldr	\irqstat, [ \tmp, #0x10 ]	@ INTPND
+		teq	\irqstat, #0
+		moveq	\irqnr, #0
+		b	1001f
+
+		@ we get here from no main or external interrupts pending
+1002:
+		add	\tmp, \tmp, #S3C2410_VA_GPIO - S3C2410_VA_IRQ
+		ldr	\irqstat, [ \tmp, # 0xa8 ]	@ EXTINTPEND
+		ldr	\irqnr, [ \tmp, # 0xa4 ]	@ EXTINTMASK
+
+		bic	\irqstat, \irqstat, \irqnr	@ clear masked irqs
+
+		mov	\irqnr, #IRQ_EINT4		@ start extint nos
+		mov	\irqstat, \irqstat, lsr#4	@ ignore bottom 4 bits
+10021:
+		movs	\irqstat, \irqstat, lsr#1
+		bcs	1004f
+		add	\irqnr, \irqnr, #1
+		cmp	\irqnr, #IRQ_EINT23
+		ble	10021b
+
+		@ found no interrupt, set Z flag and leave
+		movs	\irqnr, #0
+		b	1001f
+
+1003:
+		@ lcd interrupt has been asserted...
+		add	\tmp, \tmp, #S3C2410_VA_LCD - S3C2410_VA_IRQ
+		ldr	\irqstat, [ \tmp, # 0x54 ]	@ lcd int pending
+
+		tst	\irqstat, #2
+		movne	\irqnr, #IRQ_LCD_FRAME
+		tst	\irqstat, #1
+		movne	\irqnr, #IRQ_LCD_FIFO
+
+		@ fall through to exit with flags updated
+
+1004:		@ ensure Z flag clear in case our MOVS shifted out the last bit
+		teq	\irqnr, #0
+1001:
+		@ exit irq routine
+		.endm
+
+
+		/* currently don't need an disable_fiq macro */
+
+		.macro	disable_fiq
+		.endm
+
+		/* we don't have an irq priority table */
+		.macro irq_prio_table
+		.endm
+
 #else
 #error Unknown architecture
 #endif

arch/arm/mm/Kconfig

@@ -58,8 +58,9 @@ config CPU_ARM720T
 
 # ARM920T
 config CPU_ARM920T
-	bool "Support ARM920T processor"
-	depends on ARCH_INTEGRATOR
+	bool "Support ARM920T processor" if !ARCH_S3C2410
+	depends on ARCH_INTEGRATOR || ARCH_S3C2410
+	default y if ARCH_S3C2410
 	select CPU_32v4
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -67,7 +68,9 @@ config CPU_ARM920T
 	select CPU_TLB_V4WBI
 	help
 	  The ARM920T is licensed to be produced by numerous vendors,
-	  and is used in the Maverick EP9312.  More information at
+	  and is used in the Maverick EP9312 and the Samsung S3C2410.
+
+	  More information on the Maverick EP9312 at
 	  <http://linuxdevices.com/products/PD2382866068.html>.
 
 	  Say Y if you want support for the ARM920T processor.