r8169: disable ASPM during NAPI poll

Several chip versions have problems with ASPM, what may result in
rx_missed errors or tx timeouts. The root cause isn't known but
experience shows that disabling ASPM during NAPI poll can avoid
these problems.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/realtek/r8169_main.c

@@ -4577,6 +4577,10 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
 	}
 
 	if (napi_schedule_prep(&tp->napi)) {
+		rtl_unlock_config_regs(tp);
+		rtl_hw_aspm_clkreq_enable(tp, false);
+		rtl_lock_config_regs(tp);
+
 		rtl_irq_disable(tp);
 		__napi_schedule(&tp->napi);
 	}
@@ -4636,9 +4640,14 @@ static int rtl8169_poll(struct napi_struct *napi, int budget)
 
 	work_done = rtl_rx(dev, tp, budget);
 
-	if (work_done < budget && napi_complete_done(napi, work_done))
+	if (work_done < budget && napi_complete_done(napi, work_done)) {
 		rtl_irq_enable(tp);
 
+		rtl_unlock_config_regs(tp);
+		rtl_hw_aspm_clkreq_enable(tp, true);
+		rtl_lock_config_regs(tp);
+	}
+
 	return work_done;
 }