Merge bk://linux-input.bkbits.net/linux-input

into home.transmeta.com:/home/torvalds/v2.5/linux

drivers/input/Config.help

@@ -64,6 +64,18 @@ CONFIG_INPUT_JOYDEV
   The module will be called joydev.o. If you want to compile it as a
   module, say M here and read <file:Documentation/modules.txt>.
 
+CONFIG_INPUT_TSDEV
+  Say Y here if you have an application that only can understand the
+  Compaq touchscreen protocol for absolute pointer data. This is
+  useful namely for embedded configurations.
+
+  If unsure, say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called tsdev.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
 CONFIG_INPUT_EVDEV
   Say Y here if you want your input device events be accessible
   under char device 13:64+ - /dev/input/eventX in a generic way.
@@ -72,3 +84,17 @@ CONFIG_INPUT_EVDEV
   inserted in and removed from the running kernel whenever you want).
   The module will be called evdev.o. If you want to compile it as a
   module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_EVBUG
+  Say Y here if you have a problem with the input subsystem and
+  want all events (keypresses, mouse movements), to be output to
+  the system log. While this is useful for debugging, it's also
+  a security threat - your keypresses include your passwords, of
+  course.
+
+  If unsure, say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called joydev.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.

drivers/input/Config.in

@@ -6,20 +6,34 @@ mainmenu_option next_comment
 comment 'Input device support'
 
 tristate 'Input core support' CONFIG_INPUT
+
+comment 'Userland interfaces'
 dep_tristate '  Keyboard interface' CONFIG_INPUT_KEYBDEV $CONFIG_INPUT
 dep_tristate '  Mouse interface' CONFIG_INPUT_MOUSEDEV $CONFIG_INPUT
+dep_mbool '    Provide legacy /dev/psaux device' CONFIG_INPUT_MOUSEDEV_PSAUX $CONFIG_INPUT
 if [ "$CONFIG_INPUT_MOUSEDEV" != "n" ]; then
    int '   Horizontal screen resolution' CONFIG_INPUT_MOUSEDEV_SCREEN_X 1024
    int '   Vertical screen resolution' CONFIG_INPUT_MOUSEDEV_SCREEN_Y 768
 fi
 dep_tristate '  Joystick interface' CONFIG_INPUT_JOYDEV $CONFIG_INPUT
+dep_tristate '  Touchscreen interface' CONFIG_INPUT_TSDEV $CONFIG_INPUT
+if [ "$CONFIG_INPUT_TSDEV" != "n" ]; then
+   int '   Horizontal screen resolution' CONFIG_INPUT_TSDEV_SCREEN_X 240
+   int '   Vertical screen resolution' CONFIG_INPUT_TSDEV_SCREEN_Y 320 
+fi
 dep_tristate '  Event interface' CONFIG_INPUT_EVDEV $CONFIG_INPUT
+dep_tristate '  Event debugging' CONFIG_INPUT_EVBUG $CONFIG_INPUT
 
+comment 'Input I/O drivers'
 source drivers/input/gameport/Config.in
 source drivers/input/serio/Config.in
 
+comment 'Input Device Drivers'
 if [ "$CONFIG_INPUT" != "n" ]; then
+   source drivers/input/keyboard/Config.in
+   source drivers/input/mouse/Config.in
    source drivers/input/joystick/Config.in
+   source drivers/input/touchscreen/Config.in
 fi
 
 endmenu

drivers/input/Makefile

@@ -13,8 +13,14 @@ obj-$(CONFIG_INPUT_KEYBDEV)	+= keybdev.o
 obj-$(CONFIG_INPUT_MOUSEDEV)	+= mousedev.o
 obj-$(CONFIG_INPUT_JOYDEV)	+= joydev.o
 obj-$(CONFIG_INPUT_EVDEV)	+= evdev.o
+obj-$(CONFIG_INPUT_TSDEV)	+= tsdev.o
+obj-$(CONFIG_INPUT_POWER)	+= power.o
+obj-$(CONFIG_INPUT_EVBUG)	+= evbug.o
 
+obj-$(CONFIG_INPUT_KEYBOARD)	+= keyboard/
+obj-$(CONFIG_INPUT_MOUSE)	+= mouse/
 obj-$(CONFIG_INPUT_JOYSTICK)	+= joystick/
+obj-$(CONFIG_INPUT_TOUCHSCREEN)	+= touchscreen/
 
 # The global Rules.make.
 

drivers/input/evbug.c

+/*
+ * $Id: evbug.c,v 1.10 2001/09/25 10:12:07 vojtech Exp $
+ *
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ */
+
+/*
+ *  Input driver event debug module - dumps all events into syslog
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/init.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Input driver event debug module"); 
+MODULE_LICENSE("GPL");
+
+static void evbug_event(struct input_handle *handle, unsigned int type, unsigned int code, int value)
+{
+	printk(KERN_DEBUG "evbug.c: Event. Dev: %s, Type: %d, Code: %d, Value: %d\n", handle->dev->phys, type, code, value);
+}
+
+static struct input_handle *evbug_connect(struct input_handler *handler, struct input_dev *dev, struct input_device_id *id)
+{
+	struct input_handle *handle;
+
+	if (!(handle = kmalloc(sizeof(struct input_handle), GFP_KERNEL)))
+		return NULL;
+	memset(handle, 0, sizeof(struct input_handle));
+
+	handle->dev = dev;
+	handle->handler = handler;
+
+	input_open_device(handle);
+
+	printk(KERN_DEBUG "evbug.c: Connected device: \"%s\", %s\n", dev->name, dev->phys);
+
+	return handle;
+}
+
+static void evbug_disconnect(struct input_handle *handle)
+{
+	printk(KERN_DEBUG "evbug.c: Disconnected device: %s\n", handle->dev->phys);
+	
+	input_close_device(handle);
+
+	kfree(handle);
+}
+
+static struct input_device_id evbug_ids[] = {
+	{ driver_info: 1 },	/* Matches all devices */
+	{ },			/* Terminating zero entry */
+};
+
+MODULE_DEVICE_TABLE(input, evbug_ids);
+	
+static struct input_handler evbug_handler = {
+	event:		evbug_event,
+	connect:	evbug_connect,
+	disconnect:	evbug_disconnect,
+	name:		"evbug",
+	id_table:	evbug_ids,
+};
+
+int __init evbug_init(void)
+{
+	input_register_handler(&evbug_handler);
+	return 0;
+}
+
+void __exit evbug_exit(void)
+{
+	input_unregister_handler(&evbug_handler);
+}
+
+module_init(evbug_init);
+module_exit(evbug_exit);

drivers/input/evdev.c

 /*
- * $Id: evdev.c,v 1.42 2002/01/02 11:59:56 vojtech Exp $
+ * $Id: evdev.c,v 1.48 2002/05/26 14:28:26 jdeneux Exp $
  *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  *
@@ -40,7 +40,6 @@
 struct evdev {
 	int exist;
 	int open;
-	int open_for_write;
 	int minor;
 	char name[16];
 	struct input_handle handle;
@@ -91,7 +90,9 @@ static int evdev_fasync(int fd, struct file *file, int on)
 
 static int evdev_flush(struct file * file)
 {
-	return input_flush_device(&((struct evdev_list*)file->private_data)->evdev->handle, file);
+	struct evdev_list *list = (struct evdev_list*)file->private_data;
+	if (!list->evdev->exist) return -ENODEV;
+	return input_flush_device(&list->evdev->handle, file);
 }
 
 static int evdev_release(struct inode * inode, struct file * file)
@@ -158,6 +159,8 @@ static ssize_t evdev_write(struct file * file, const char * buffer, size_t count
 	struct input_event event;
 	int retval = 0;
 
+	if (!list->evdev->exist) return -ENODEV;
+
 	while (retval < count) {
 
 		if (copy_from_user(&event, buffer + retval, sizeof(struct input_event)))
@@ -232,6 +235,8 @@ static int evdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	struct input_dev *dev = evdev->handle.dev;
 	int retval, t, u;
 
+	if (!evdev->exist) return -ENODEV;
+
 	switch (cmd) {
 
 		case EVIOCGVERSION:
@@ -284,11 +289,11 @@ static int evdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 				int err;
 
 				if (copy_from_user((void*)(&effect), (void*)arg, sizeof(effect))) {
-					return -EINVAL;
+					return -EFAULT;
 				}
 				err = dev->upload_effect(dev, &effect);
 				if (put_user(effect.id, &(((struct ff_effect*)arg)->id))) {
-					return -EINVAL;
+					return -EFAULT;
 				}
 				return err;
 			}
@@ -301,7 +306,8 @@ static int evdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			else return -ENOSYS;
 
 		case EVIOCGEFFECTS:
-			put_user(dev->ff_effects_max, (int*) arg);
+			if ((retval = put_user(dev->ff_effects_max, (int*) arg)))
+				return retval;
 			return 0;
 
 		default:

drivers/input/gameport/Config.help

@@ -43,13 +43,13 @@ CONFIG_GAMEPORT_EMU10K1
   The module will be called emu10k1-gp.o. If you want to compile it as
   a module, say M here and read <file:Documentation/modules.txt>.
 
-CONFIG_GAMEPORT_PCIGAME
-  Say Y here if you have an Aureal Vortex 1 or 2 or a Trident
-  4DWave NX or DX card and want to use its gameport.
+CONFIG_GAMEPORT_VORTEX
+  Say Y here if you have an Aureal Vortex 1 or 2  card and want
+  to use its gameport.
 
   This driver is also available as a module ( = code which can be
   inserted in and removed from the running kernel whenever you want).
-  The module will be called pcigame.o. If you want to compile it as a
+  The module will be called vortex.o. If you want to compile it as a
   module, say M here and read <file:Documentation/modules.txt>.
 
 CONFIG_GAMEPORT_CS461X

drivers/input/gameport/Config.in

@@ -14,6 +14,6 @@ fi
 dep_tristate '  Classic ISA and PnP gameport support' CONFIG_GAMEPORT_NS558 $CONFIG_GAMEPORT
 dep_tristate '  PDPI Lightning 4 gamecard support' CONFIG_GAMEPORT_L4 $CONFIG_GAMEPORT
 dep_tristate '  SB Live and Audigy gameport support' CONFIG_INPUT_EMU10K1 $CONFIG_GAMEPORT
-dep_tristate '  Aureal Vortex, Vortex 2 and Trident 4DWave NX/DX gameport support' CONFIG_GAMEPORT_PCIGAME $CONFIG_GAMEPORT
+dep_tristate '  Aureal Vortex, Vortex 2 gameport support' CONFIG_GAMEPORT_VORTEX $CONFIG_GAMEPORT
 dep_tristate '  ForteMedia FM801 gameport support' CONFIG_GAMEPORT_FM801 $CONFIG_GAMEPORT
 dep_tristate '  Crystal SoundFusion gameport support' CONFIG_GAMEPORT_CS461x $CONFIG_GAMEPORT

drivers/input/gameport/Makefile

@@ -11,9 +11,10 @@ export-objs	:= gameport.o
 obj-$(CONFIG_GAMEPORT)		+= gameport.o
 obj-$(CONFIG_GAMEPORT_CS461X)	+= cs461x.o
 obj-$(CONFIG_GAMEPORT_EMU10K1)	+= emu10k1-gp.o
+obj-$(CONFIG_GAMEPORT_FM801)	+= fm801-gp.o
 obj-$(CONFIG_GAMEPORT_L4)	+= lightning.o
 obj-$(CONFIG_GAMEPORT_NS558)	+= ns558.o
-obj-$(CONFIG_GAMEPORT_PCIGAME)	+= pcigame.o
+obj-$(CONFIG_GAMEPORT_VORTEX)	+= vortex.o
 
 # The global Rules.make.
 

drivers/input/gameport/fm801-gp.c

+/*
+ *  FM801 gameport driver for Linux
+ *
+ *  Copyright (c) by Takashi Iwai <tiwai@suse.de>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/gameport.h>
+
+#define PCI_VENDOR_ID_FORTEMEDIA	0x1319
+#define PCI_DEVICE_ID_FM801_GP	0x0802
+
+#define HAVE_COOKED
+
+struct fm801_gp {
+	struct gameport gameport;
+	struct resource *res_port;
+	char phys[32];
+	char name[32];
+};
+
+#ifdef HAVE_COOKED
+static int fm801_gp_cooked_read(struct gameport *gameport, int *axes, int *buttons)
+{
+	unsigned short w;
+
+	w = inw(gameport->io + 2);
+	*buttons = (~w >> 14) & 0x03;
+	axes[0] = (w == 0xffff) ? -1 : ((w & 0x1fff) << 5);
+	w = inw(gameport->io + 4);
+	axes[1] = (w == 0xffff) ? -1 : ((w & 0x1fff) << 5);
+	w = inw(gameport->io + 6);
+	*buttons |= ((~w >> 14) & 0x03) << 2;
+	axes[2] = (w == 0xffff) ? -1 : ((w & 0x1fff) << 5);
+	w = inw(gameport->io + 8);
+	axes[3] = (w == 0xffff) ? -1 : ((w & 0x1fff) << 5);
+	outw(0xff, gameport->io); /* reset */
+
+        return 0;
+}
+#endif
+
+static int fm801_gp_open(struct gameport *gameport, int mode)
+{
+	switch (mode) {
+#ifdef HAVE_COOKED
+	case GAMEPORT_MODE_COOKED:
+		return 0;
+#endif
+	case GAMEPORT_MODE_RAW:
+		return 0;
+	default:
+		return -1;
+	}
+
+	return 0;
+}
+
+static int __devinit fm801_gp_probe(struct pci_dev *pci, const struct pci_device_id *id)
+{
+	struct fm801_gp *gp;
+
+	if (! (gp = kmalloc(sizeof(*gp), GFP_KERNEL))) {
+		printk("cannot malloc for fm801-gp\n");
+		return -1;
+	}
+	memset(gp, 0, sizeof(*gp));
+
+	gp->gameport.open = fm801_gp_open;
+#ifdef HAVE_COOKED
+	gp->gameport.cooked_read = fm801_gp_cooked_read;
+#endif
+
+	pci_enable_device(pci);
+	gp->gameport.io = pci_resource_start(pci, 0);
+	if ((gp->res_port = request_region(gp->gameport.io, 0x10, "FM801 GP")) == NULL) {
+		kfree(gp);
+		printk("unable to grab region 0x%x-0x%x\n", gp->gameport.io, gp->gameport.io + 0x0f);
+		return -1;
+	}
+
+	gp->gameport.phys = gp->phys;
+	gp->gameport.name = gp->name;
+	gp->gameport.idbus = BUS_PCI;
+	gp->gameport.idvendor = pci->vendor;
+	gp->gameport.idproduct = pci->device;
+
+	pci_set_drvdata(pci, gp);
+
+	outb(0x60, gp->gameport.io + 0x0d); /* enable joystick 1 and 2 */ 
+
+	gameport_register_port(&gp->gameport);
+
+	printk(KERN_INFO "gameport: %s at pci%s speed %d kHz\n",
+		pci->name, pci->slot_name, gp->gameport.speed);
+
+	return 0;
+}
+
+static void __devexit fm801_gp_remove(struct pci_dev *pci)
+{
+	struct fm801_gp *gp = pci_get_drvdata(pci);
+	if (gp) {
+		gameport_unregister_port(&gp->gameport);
+		release_resource(gp->res_port);
+		kfree(gp);
+	}
+}
+
+static struct pci_device_id fm801_gp_id_table[] __devinitdata = {
+	{ PCI_VENDOR_ID_FORTEMEDIA, PCI_DEVICE_ID_FM801_GP, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0  },
+	{ 0 }
+};
+
+static struct pci_driver fm801_gp_driver = {
+	name:		"FM801 GP",
+	id_table:	fm801_gp_id_table,
+	probe:		fm801_gp_probe,
+	remove:		fm801_gp_remove,
+};
+
+int __init fm801_gp_init(void)
+{
+	return pci_module_init(&fm801_gp_driver);
+}
+
+void __exit fm801_gp_exit(void)
+{
+	pci_unregister_driver(&fm801_gp_driver);
+}
+
+module_init(fm801_gp_init);
+module_exit(fm801_gp_exit);
+
+MODULE_DEVICE_TABLE(pci, fm801_gp_id_table);
+
+MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>");
+MODULE_LICENSE("GPL");

drivers/input/gameport/gameport.c

@@ -54,16 +54,36 @@ EXPORT_SYMBOL(gameport_cooked_read);
 static struct gameport *gameport_list;
 static struct gameport_dev *gameport_dev;
 
+
+#ifdef __i386__
+
+#define DELTA(x,y)      ((y)-(x)+((y)<(x)?1193180/HZ:0))
+#define GET_TIME(x)     do { x = get_time_pit(); } while (0)
+
+static unsigned int get_time_pit(void)
+{
+	extern spinlock_t i8253_lock;
+	unsigned long flags;
+	unsigned int count;
+
+	spin_lock_irqsave(&i8253_lock, flags);
+	outb_p(0x00, 0x43);
+	count = inb_p(0x40);
+	count |= inb_p(0x40) << 8;
+	spin_unlock_irqrestore(&i8253_lock, flags);
+
+	return count;
+}
+
+#endif
+
 /*
  * gameport_measure_speed() measures the gameport i/o speed.
  */
 
 static int gameport_measure_speed(struct gameport *gameport)
 {
-#if defined(__i386__) || defined(__x86_64__)
-
-#define GET_TIME(x)     do { outb(0, 0x43); x = inb(0x40); x |= inb(0x40) << 8; } while (0)
-#define DELTA(x,y)      ((y)-(x)+((y)<(x)?1193180L/HZ:0))
+#ifdef __i386__
 
 	unsigned int i, t, t1, t2, t3, tx;
 	unsigned long flags;

drivers/input/gameport/pcigame.c → drivers/input/gameport/vortex.c

 /*
- * $Id: pcigame.c,v 1.10 2001/04/26 10:24:46 vojtech Exp $
+ * $Id: vortex.c,v 1.5 2002/07/01 15:39:30 vojtech Exp $
  *
  *  Copyright (c) 2000-2001 Vojtech Pavlik
  *
  *  Based on the work of:
  *	Raymond Ingles
- *
- *  Sponsored by SuSE
  */
 
 /*
@@ -29,8 +27,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  *
  * Should you need to contact me, the author, you can do so either by
- * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
- * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
  */
 
 #include <asm/io.h>
@@ -44,74 +42,61 @@
 #include <linux/slab.h>
 #include <linux/gameport.h>
 
-#define PCI_VENDOR_ID_AUREAL	0x12eb
-
-#define PCIGAME_DATA_WAIT	20	/* 20 ms */
-
-#define PCIGAME_4DWAVE		0
-#define PCIGAME_VORTEX		1
-#define PCIGAME_VORTEX2		2
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Aureal Vortex and Vortex2 gameport driver");
+MODULE_LICENSE("GPL");
 
-struct pcigame_data {
-	int gcr;	/* Gameport control register */
-	int legacy;	/* Legacy port location */
-	int axes;	/* Axes start */
-	int axsize;	/* Axis field size */
-	int axmax;	/* Axis field max value */
-	int adcmode;	/* Value to enable ADC mode in GCR */
-};
+#define VORTEX_GCR		0x0c	/* Gameport control register */
+#define VORTEX_LEG		0x08	/* Legacy port location */
+#define VORTEX_AXD		0x10	/* Axes start */
+#define VORTEX_DATA_WAIT	20	/* 20 ms */
 
-static struct pcigame_data pcigame_data[] __devinitdata =
-{{ 0x00030, 0x00031, 0x00034, 2, 0xffff, 0x80 },
- { 0x1100c, 0x11008, 0x11010, 4, 0x1fff, 0x40 },
- { 0x2880c, 0x28808, 0x28810, 4, 0x1fff, 0x40 },
- { 0 }};
-
-struct pcigame {
+struct vortex {
 	struct gameport gameport;
 	struct pci_dev *dev;
         unsigned char *base;
-	struct pcigame_data *data;
+        unsigned char *io;
+	char phys[32];
 };
 
-static unsigned char pcigame_read(struct gameport *gameport)
+static unsigned char vortex_read(struct gameport *gameport)
 {
-	struct pcigame *pcigame = gameport->private;
-	return readb(pcigame->base + pcigame->data->legacy);
+	struct vortex *vortex = gameport->driver;
+	return readb(vortex->io + VORTEX_LEG);
 }
 
-static void pcigame_trigger(struct gameport *gameport)
+static void vortex_trigger(struct gameport *gameport)
 {
-	struct pcigame *pcigame = gameport->private;
-	writeb(0xff, pcigame->base + pcigame->data->legacy);
+	struct vortex *vortex = gameport->driver;
+	writeb(0xff, vortex->io + VORTEX_LEG);
 }
 
-static int pcigame_cooked_read(struct gameport *gameport, int *axes, int *buttons)
+static int vortex_cooked_read(struct gameport *gameport, int *axes, int *buttons)
 {
-        struct pcigame *pcigame = gameport->private;
+	struct vortex *vortex = gameport->driver;
 	int i;
 
-	*buttons = (~readb(pcigame->base + pcigame->data->legacy) >> 4) & 0xf;
+	*buttons = (~readb(vortex->base + VORTEX_LEG) >> 4) & 0xf;
 
 	for (i = 0; i < 4; i++) {
-		axes[i] = readw(pcigame->base + pcigame->data->axes + i * pcigame->data->axsize);
-		if (axes[i] == pcigame->data->axmax) axes[i] = -1;
+		axes[i] = readw(vortex->io + VORTEX_AXD + i * sizeof(u32));
+		if (axes[i] == 0x1fff) axes[i] = -1;
 	}
         
         return 0;
 }
 
-static int pcigame_open(struct gameport *gameport, int mode)
+static int vortex_open(struct gameport *gameport, int mode)
 {
-	struct pcigame *pcigame = gameport->private;
+	struct vortex *vortex = gameport->driver;
 
 	switch (mode) {
 		case GAMEPORT_MODE_COOKED:
-			writeb(pcigame->data->adcmode, pcigame->base + pcigame->data->gcr);
-			wait_ms(PCIGAME_DATA_WAIT);
+			writeb(0x40, vortex->io + VORTEX_GCR);
+			wait_ms(VORTEX_DATA_WAIT);
 			return 0;
 		case GAMEPORT_MODE_RAW:
-			writeb(0, pcigame->base + pcigame->data->gcr);
+			writeb(0x00, vortex->io + VORTEX_GCR);
 			return 0;
 		default:
 			return -1;
@@ -120,28 +105,33 @@ static int pcigame_open(struct gameport *gameport, int mode)
 	return 0;
 }
 
-static int __devinit pcigame_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int __devinit vortex_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	struct pcigame *pcigame;
+	struct vortex *vortex;
 	int i;
 
-	if (!(pcigame = kmalloc(sizeof(struct pcigame), GFP_KERNEL)))
+	if (!(vortex = kmalloc(sizeof(struct vortex), GFP_KERNEL)))
 		return -1;
-        memset(pcigame, 0, sizeof(struct pcigame));
-
+        memset(vortex, 0, sizeof(struct vortex));
 
-	pcigame->data = pcigame_data + id->driver_data;
+	vortex->dev = dev;
+	sprintf(vortex->phys, "pci%s/gameport0", dev->slot_name);
 
-	pcigame->dev = dev;
-	pci_set_drvdata(dev, pcigame);
+	pci_set_drvdata(dev, vortex);
 
-	pcigame->gameport.private = pcigame;
-	pcigame->gameport.fuzz = 64;
+	vortex->gameport.driver = vortex;
+	vortex->gameport.fuzz = 64;
 	
-	pcigame->gameport.read = pcigame_read;
-	pcigame->gameport.trigger = pcigame_trigger;
-	pcigame->gameport.cooked_read = pcigame_cooked_read;
-	pcigame->gameport.open = pcigame_open;
+	vortex->gameport.read = vortex_read;
+	vortex->gameport.trigger = vortex_trigger;
+	vortex->gameport.cooked_read = vortex_cooked_read;
+	vortex->gameport.open = vortex_open;
+
+	vortex->gameport.name = dev->name;
+	vortex->gameport.phys = vortex->phys;
+	vortex->gameport.idbus = BUS_PCI;
+	vortex->gameport.idvendor = dev->vendor;
+	vortex->gameport.idproduct = dev->device;
 
 	for (i = 0; i < 6; i++)
 		if (~pci_resource_flags(dev, i) & IORESOURCE_IO)
@@ -149,51 +139,47 @@ static int __devinit pcigame_probe(struct pci_dev *dev, const struct pci_device_
 
 	pci_enable_device(dev);
 
-	pcigame->base = ioremap(pci_resource_start(pcigame->dev, i),
-				pci_resource_len(pcigame->dev, i));
+	vortex->base = ioremap(pci_resource_start(vortex->dev, i),
+				pci_resource_len(vortex->dev, i));
+	vortex->io = vortex->base + id->driver_data;
 
-	gameport_register_port(&pcigame->gameport);
+	gameport_register_port(&vortex->gameport);
 	
-	printk(KERN_INFO "gameport%d: %s at pci%02x:%02x.%x speed %d kHz\n",
-		pcigame->gameport.number, dev->name, dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), pcigame->gameport.speed);
+	printk(KERN_INFO "gameport: %s at pci%s speed %d kHz\n",
+		dev->name, dev->slot_name, vortex->gameport.speed);
 
 	return 0;
 }
 
-static void __devexit pcigame_remove(struct pci_dev *dev)
+static void __devexit vortex_remove(struct pci_dev *dev)
 {
-	struct pcigame *pcigame = pci_get_drvdata(dev);
-	gameport_unregister_port(&pcigame->gameport);
-	iounmap(pcigame->base);
-	kfree(pcigame);
+	struct vortex *vortex = pci_get_drvdata(dev);
+	gameport_unregister_port(&vortex->gameport);
+	iounmap(vortex->base);
+	kfree(vortex);
 }
 
-static struct pci_device_id pcigame_id_table[] __devinitdata =
-{{ PCI_VENDOR_ID_TRIDENT, 0x2000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCIGAME_4DWAVE  },
- { PCI_VENDOR_ID_TRIDENT, 0x2001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCIGAME_4DWAVE  },
- { PCI_VENDOR_ID_AUREAL,  0x0001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCIGAME_VORTEX  },
- { PCI_VENDOR_ID_AUREAL,  0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCIGAME_VORTEX2 },
+static struct pci_device_id vortex_id_table[] __devinitdata =
+{{ 0x12eb, 0x0001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x11000 },
+ { 0x12eb, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x28800 },
  { 0 }};
 
-static struct pci_driver pcigame_driver = {
-	name:		"pcigame",
-	id_table:	pcigame_id_table,
-	probe:		pcigame_probe,
-	remove:		__devexit_p(pcigame_remove),
+static struct pci_driver vortex_driver = {
+	name:		"vortex",
+	id_table:	vortex_id_table,
+	probe:		vortex_probe,
+	remove:		vortex_remove,
 };
 
-int __init pcigame_init(void)
+int __init vortex_init(void)
 {
-	return pci_module_init(&pcigame_driver);
+	return pci_module_init(&vortex_driver);
 }
 
-void __exit pcigame_exit(void)
+void __exit vortex_exit(void)
 {
-	pci_unregister_driver(&pcigame_driver);
+	pci_unregister_driver(&vortex_driver);
 }
 
-module_init(pcigame_init);
-module_exit(pcigame_exit);
-
-MODULE_LICENSE("GPL");
+module_init(vortex_init);
+module_exit(vortex_exit);

drivers/input/input.c

@@ -61,8 +61,6 @@ static struct input_dev *input_dev;
 static struct input_handler *input_handler;
 static struct input_handler *input_table[8];
 static devfs_handle_t input_devfs_handle;
-static int input_number;
-static long input_devices[NBITS(INPUT_DEVICES)];
 
 #ifdef CONFIG_PROC_FS
 static struct proc_dir_entry *proc_bus_input_dir;
@@ -454,17 +452,8 @@ void input_register_device(struct input_dev *dev)
  * Add the device.
  */
 
-	if (input_number >= INPUT_DEVICES) {
-		printk(KERN_WARNING "input: ran out of input device numbers!\n");
-		dev->number = input_number;
-	} else {
-		dev->number = find_first_zero_bit(input_devices, INPUT_DEVICES);
-		set_bit(dev->number, input_devices);
-	}
-		
 	dev->next = input_dev;	
 	input_dev = dev;
-	input_number++;
 
 /*
  * Notify handlers.
@@ -493,7 +482,6 @@ void input_register_device(struct input_dev *dev)
 	input_devices_state++;
 	wake_up(&input_devices_poll_wait);
 #endif
-
 }
 
 void input_unregister_device(struct input_dev *dev)
@@ -509,7 +497,6 @@ void input_unregister_device(struct input_dev *dev)
 	if (dev->pm_dev)
 		pm_unregister(dev->pm_dev);
 
-
 /*
  * Kill any pending repeat timers.
  */
@@ -540,7 +527,6 @@ void input_unregister_device(struct input_dev *dev)
  */
 	input_find_and_remove(struct input_dev, input_dev, dev, next);
 
-	input_number--;
 /*
  * Notify /proc.
  */

drivers/input/joydev.c

 /*
- * $Id: joydev.c,v 1.38 2001/12/27 10:37:41 vojtech Exp $
+ * $Id: joydev.c,v 1.43 2002/04/09 23:59:01 jsimmons Exp $
  *
  *  Copyright (c) 1999-2001 Vojtech Pavlik 
  *  Copyright (c) 1999 Colin Van Dyke 
@@ -49,7 +49,7 @@ MODULE_SUPPORTED_DEVICE("input/js");
 MODULE_LICENSE("GPL");
 
 #define JOYDEV_MINOR_BASE	0
-#define JOYDEV_MINORS		32
+#define JOYDEV_MINORS		16	
 #define JOYDEV_BUFFER_SIZE	64
 
 #define MSECS(t)	(1000 * ((t) / HZ) + 1000 * ((t) % HZ) / HZ)
@@ -254,6 +254,10 @@ static ssize_t joydev_read(struct file *file, char *buf, size_t count, loff_t *p
 
 		while (list->head == list->tail) {
 
+			if (!joydev->exist) {
+				retval = -ENODEV;
+				break;
+			}
 			if (file->f_flags & O_NONBLOCK) {
 				retval = -EAGAIN;
 				break;
@@ -325,6 +329,8 @@ static int joydev_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 	struct input_dev *dev = joydev->handle.dev;
 	int i;
 
+	if (!joydev->exist) return -ENODEV;
+
 	switch (cmd) {
 
 		case JS_SET_CAL:

drivers/input/joystick/Config.help

@@ -67,6 +67,15 @@ CONFIG_JOYSTICK_GRIP
   The module will be called grip.o. If you want to compile it as a
   module, say M here and read <file:Documentation/modules.txt>.
 
+CONFIG_JOYSTICK_GUILLEMOT
+  Say Y here if you have a Guillemot joystick using a digital
+  protocol over the PC gameport. 
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called guillemot.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
 CONFIG_JOYSTICK_INTERACT
   Say Y here if you have an InterAct gameport or joystick
   communicating digitally over the gameport.
@@ -158,6 +167,15 @@ CONFIG_JOYSTICK_STINGER
   The module will be called stinger.o. If you want to compile it as a
   module, say M here and read <file:Documentation/modules.txt>.
 
+CONFIG_JOYSTICK_TWIDDLER
+  Say Y here if you have a Handykey Twiddler connected to your
+  computer's serial port and want to use it as a joystick.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called twidjoy.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
 CONFIG_JOYSTICK_DB9
   Say Y here if you have a Sega Master System gamepad, Sega Genesis
   gamepad, Sega Saturn gamepad, or a Multisystem -- Atari, Amiga,

drivers/input/joystick/Config.in

@@ -10,6 +10,7 @@ dep_tristate '  Logitech ADI digital joysticks and gamepads' CONFIG_JOYSTICK_ADI
 dep_tristate '  Creative Labs Blaster Cobra gamepad' CONFIG_JOYSTICK_COBRA $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_GAMEPORT
 dep_tristate '  Genius Flight2000 Digital joysticks and gamepads' CONFIG_JOYSTICK_GF2K $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_GAMEPORT
 dep_tristate '  Gravis GrIP joysticks and gamepads' CONFIG_JOYSTICK_GRIP $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_GAMEPORT
+dep_tristate '  Guillemot joysticks and gamepads' CONFIG_JOYSTICK_GUILLEMOT $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_GAMEPORT
 dep_tristate '  InterAct digital joysticks and gamepads' CONFIG_JOYSTICK_INTERACT $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_GAMEPORT
 dep_tristate '  Microsoft SideWinder digital joysticks and gamepads' CONFIG_JOYSTICK_SIDEWINDER $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_GAMEPORT
 dep_tristate '  ThrustMaster DirectConnect joysticks and gamepads' CONFIG_JOYSTICK_TMDC $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_GAMEPORT
@@ -21,6 +22,7 @@ dep_tristate '  LogiCad3d Magellan/SpaceMouse 6dof controllers' CONFIG_JOYSTICK_
 dep_tristate '  SpaceTec SpaceOrb/Avenger 6dof controllers' CONFIG_JOYSTICK_SPACEORB $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_SERIO
 dep_tristate '  SpaceTec SpaceBall 6dof controllers' CONFIG_JOYSTICK_SPACEBALL $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_SERIO
 dep_tristate '  Gravis Stinger gamepad' CONFIG_JOYSTICK_STINGER $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_SERIO
+dep_tristate '  Twiddler as as joystick' CONFIG_JOYSTICK_TWIDDLER $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_SERIO
 
 dep_tristate '  Multisystem, Sega Genesis, Saturn joysticks and gamepads' CONFIG_JOYSTICK_DB9 $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_PARPORT
 dep_tristate '  Multisystem, NES, SNES, N64, PSX joysticks and gamepads' CONFIG_JOYSTICK_GAMECON $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_PARPORT

drivers/input/joystick/Makefile

@@ -31,8 +31,9 @@ obj-$(CONFIG_JOYSTICK_DB9)		+= db9.o
 obj-$(CONFIG_JOYSTICK_GAMECON)		+= gamecon.o
 obj-$(CONFIG_JOYSTICK_GF2K)		+= gf2k.o
 obj-$(CONFIG_JOYSTICK_GRIP)		+= grip.o
-obj-$(CONFIG_JOYSTICK_IFORCE)		+= iforce.o
+obj-$(CONFIG_JOYSTICK_GUILLEMOT)	+= guillemot.o
 obj-$(CONFIG_JOYSTICK_INTERACT)		+= interact.o
+obj-$(CONFIG_JOYSTICK_JOYDUMP)		+= joydump.o
 obj-$(CONFIG_JOYSTICK_MAGELLAN)		+= magellan.o
 obj-$(CONFIG_JOYSTICK_SIDEWINDER)	+= sidewinder.o
 obj-$(CONFIG_JOYSTICK_SPACEBALL)	+= spaceball.o
@@ -40,8 +41,11 @@ obj-$(CONFIG_JOYSTICK_SPACEORB)		+= spaceorb.o
 obj-$(CONFIG_JOYSTICK_STINGER)		+= stinger.o
 obj-$(CONFIG_JOYSTICK_TMDC)		+= tmdc.o
 obj-$(CONFIG_JOYSTICK_TURBOGRAFX)	+= turbografx.o
+obj-$(CONFIG_JOYSTICK_TWIDJOY)		+= twidjoy.o
 obj-$(CONFIG_JOYSTICK_WARRIOR)		+= warrior.o
 
+obj-$(CONFIG_JOYSTICK_IFORCE)		+= iforce/
+
 # The global Rules.make.
 
 include $(TOPDIR)/Rules.make

drivers/input/joystick/adi.c

@@ -426,10 +426,10 @@ static void adi_init_input(struct adi *adi, struct adi_port *port, int half)
 	adi->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
 
 	for (i = 0; i < adi->axes10 + adi->axes8 + (adi->hats + (adi->pad != -1)) * 2; i++)
-		set_bit(adi->abs[i], &adi->dev.absbit);
+		set_bit(adi->abs[i], adi->dev.absbit);
 
 	for (i = 0; i < adi->buttons; i++)
-		set_bit(adi->key[i], &adi->dev.keybit);
+		set_bit(adi->key[i], adi->dev.keybit);
 }
 
 static void adi_init_center(struct adi *adi)

drivers/input/joystick/db9.c

 /*
- * $Id: db9.c,v 1.12 2002/01/22 20:27:05 vojtech Exp $
+ * $Id: db9.c,v 1.13 2002/04/07 20:13:37 vojtech Exp $
  *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  *
@@ -199,7 +199,7 @@ static void db9_timer(unsigned long private)
 			data=parport_read_data(port);
 
 			input_report_key(dev, BTN_A, ~data & DB9_FIRE1);
-			input_report_key(dev, BTN_X, ~data & DB9_FIRE2);
+			input_report_key(dev, BTN_START, ~data & DB9_FIRE2);
 
 			parport_write_control(port, DB9_NOSELECT); /* 2 */
 			udelay(DB9_GENESIS6_DELAY);
@@ -209,10 +209,10 @@ static void db9_timer(unsigned long private)
 			udelay(DB9_GENESIS6_DELAY);
 			data=parport_read_data(port);
 
-			input_report_key(dev, BTN_Y,     ~data & DB9_LEFT);
-			input_report_key(dev, BTN_Z,     ~data & DB9_DOWN);
-			input_report_key(dev, BTN_MODE,  ~data & DB9_UP);
-			input_report_key(dev, BTN_START, ~data & DB9_RIGHT);
+			input_report_key(dev, BTN_X,    ~data & DB9_LEFT);
+			input_report_key(dev, BTN_Y,    ~data & DB9_DOWN);
+			input_report_key(dev, BTN_Z,    ~data & DB9_UP);
+			input_report_key(dev, BTN_MODE, ~data & DB9_RIGHT);
 
 			parport_write_control(port, DB9_NORMAL);
 			udelay(DB9_GENESIS6_DELAY);

drivers/input/joystick/gamecon.c

 /*
- * $Id: gamecon.c,v 1.21 2002/01/22 20:27:27 vojtech Exp $
+ * $Id: gamecon.c,v 1.22 2002/07/01 15:42:25 vojtech Exp $
  *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  *
@@ -398,8 +398,8 @@ static void gc_timer(unsigned long private)
 
 			case GC_PSX_RUMBLE:
 
-				input_report_key(dev + i, BTN_THUMB,  ~data[0] & 0x04);
-				input_report_key(dev + i, BTN_THUMB2, ~data[0] & 0x02);
+				input_report_key(dev + i, BTN_THUMBL, ~data[0] & 0x04);
+				input_report_key(dev + i, BTN_THUMBR, ~data[0] & 0x02);
 
 			case GC_PSX_NEGCON:
 			case GC_PSX_ANALOG:

drivers/input/joystick/guillemot.c

+/*
+ * $Id: guillemot.c,v 1.10 2002/01/22 20:28:12 vojtech Exp $
+ *
+ *  Copyright (c) 2001 Vojtech Pavlik
+ */
+
+/*
+ * Guillemot Digital Interface Protocol driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/gameport.h>
+#include <linux/input.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Guillemot Digital joystick driver");
+MODULE_LICENSE("GPL");
+
+#define GUILLEMOT_MAX_START	600	/* 600 us */
+#define GUILLEMOT_MAX_STROBE	60	/* 60 us */
+#define GUILLEMOT_MAX_LENGTH	17	/* 17 bytes */
+#define GUILLEMOT_REFRESH_TIME	HZ/50	/* 20 ms */
+
+static short guillemot_abs_pad[] = 
+	{ ABS_X, ABS_Y, ABS_THROTTLE, ABS_RUDDER, -1 };
+
+static short guillemot_btn_pad[] =
+	{ BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL, BTN_TR, BTN_MODE, BTN_SELECT, -1 };
+
+static struct {
+        int x;
+        int y;
+} guillemot_hat_to_axis[16] = {{ 0,-1}, { 1,-1}, { 1, 0}, { 1, 1}, { 0, 1}, {-1, 1}, {-1, 0}, {-1,-1}};
+
+struct guillemot_type {
+	unsigned char id;
+	short *abs;
+	short *btn;
+	int hat;
+	char *name;
+};
+
+struct guillemot {
+	struct gameport *gameport;
+	struct input_dev dev;
+	struct timer_list timer;
+	int used;
+	int bads;
+	int reads;
+	struct guillemot_type *type;
+	unsigned char length;
+	char phys[32];
+};
+
+static struct guillemot_type guillemot_type[] = {
+	{ 0x00, guillemot_abs_pad, guillemot_btn_pad, 1, "Guillemot Pad" },
+	{ 0 }};
+
+/*
+ * guillemot_read_packet() reads Guillemot joystick data.
+ */
+
+static int guillemot_read_packet(struct gameport *gameport, u8 *data)
+{
+	unsigned long flags;
+	unsigned char u, v;
+	unsigned int t, s;
+	int i;
+
+	for (i = 0; i < GUILLEMOT_MAX_LENGTH; i++)
+		data[i] = 0;
+
+	i = 0;
+	t = gameport_time(gameport, GUILLEMOT_MAX_START);
+	s = gameport_time(gameport, GUILLEMOT_MAX_STROBE);
+
+	__save_flags(flags);
+	__cli();
+	gameport_trigger(gameport);
+	v = gameport_read(gameport);
+
+	while (t > 0 && i < GUILLEMOT_MAX_LENGTH * 8) {
+		t--;
+		u = v; v = gameport_read(gameport);
+		if (v & ~u & 0x10) {
+			data[i >> 3] |= ((v >> 5) & 1) << (i & 7);
+			i++;
+			t = s;
+		}
+	}
+
+	__restore_flags(flags);
+
+	return i;
+}
+
+/*
+ * guillemot_timer() reads and analyzes Guillemot joystick data.
+ */
+
+static void guillemot_timer(unsigned long private)
+{
+	struct guillemot *guillemot = (struct guillemot *) private;
+	struct input_dev *dev = &guillemot->dev;
+	u8 data[GUILLEMOT_MAX_LENGTH];
+	int i;
+
+	guillemot->reads++;
+
+	if (guillemot_read_packet(guillemot->gameport, data) != GUILLEMOT_MAX_LENGTH * 8 ||
+		data[0] != 0x55 || data[16] != 0xaa) {
+		guillemot->bads++;
+	} else {
+
+		for (i = 0; i < 6 && guillemot->type->abs[i] >= 0; i++)
+			input_report_abs(dev, guillemot->type->abs[i], data[i + 5]);
+
+		if (guillemot->type->hat) {
+			input_report_abs(dev, ABS_HAT0X, guillemot_hat_to_axis[data[4] >> 4].x);
+			input_report_abs(dev, ABS_HAT0Y, guillemot_hat_to_axis[data[4] >> 4].y);
+		}
+
+		for (i = 0; i < 16 && guillemot->type->btn[i] >= 0; i++)
+			input_report_key(dev, guillemot->type->btn[i], (data[2 + (i >> 3)] >> (i & 7)) & 1);
+	}
+
+	mod_timer(&guillemot->timer, jiffies + GUILLEMOT_REFRESH_TIME);
+}
+
+/*
+ * guillemot_open() is a callback from the input open routine.
+ */
+
+static int guillemot_open(struct input_dev *dev)
+{
+	struct guillemot *guillemot = dev->private;
+	if (!guillemot->used++)
+		mod_timer(&guillemot->timer, jiffies + GUILLEMOT_REFRESH_TIME);	
+	return 0;
+}
+
+/*
+ * guillemot_close() is a callback from the input close routine.
+ */
+
+static void guillemot_close(struct input_dev *dev)
+{
+	struct guillemot *guillemot = dev->private;
+	if (!--guillemot->used)
+		del_timer(&guillemot->timer);
+}
+
+/*
+ * guillemot_connect() probes for Guillemot joysticks.
+ */
+
+static void guillemot_connect(struct gameport *gameport, struct gameport_dev *dev)
+{
+	struct guillemot *guillemot;
+	u8 data[GUILLEMOT_MAX_LENGTH];
+	int i, t;
+
+	if (!(guillemot = kmalloc(sizeof(struct guillemot), GFP_KERNEL)))
+		return;
+	memset(guillemot, 0, sizeof(struct guillemot));
+
+	gameport->private = guillemot;
+
+	guillemot->gameport = gameport;
+	init_timer(&guillemot->timer);
+	guillemot->timer.data = (long) guillemot;
+	guillemot->timer.function = guillemot_timer;
+
+	if (gameport_open(gameport, dev, GAMEPORT_MODE_RAW))
+		goto fail1;
+
+	i = guillemot_read_packet(gameport, data);
+
+	if (i != GUILLEMOT_MAX_LENGTH * 8 || data[0] != 0x55 || data[16] != 0xaa)
+		goto fail2;
+
+	for (i = 0; guillemot_type[i].name; i++)
+		if (guillemot_type[i].id == data[11])
+			break;
+
+	if (!guillemot_type[i].name) {
+		printk(KERN_WARNING "guillemot.c: Unknown joystick on %s. [ %02x%02x:%04x, ver %d.%02d ]\n",
+			gameport->phys, data[12], data[13], data[11], data[14], data[15]);
+		goto fail2;	
+	}
+
+	sprintf(guillemot->phys, "%s/input0", gameport->phys);
+
+	guillemot->type = guillemot_type + i;
+
+	guillemot->dev.private = guillemot;
+	guillemot->dev.open = guillemot_open;
+	guillemot->dev.close = guillemot_close;
+
+	guillemot->dev.name = guillemot_type[i].name;
+	guillemot->dev.phys = guillemot->phys;
+	guillemot->dev.idbus = BUS_GAMEPORT;
+	guillemot->dev.idvendor = GAMEPORT_ID_VENDOR_GUILLEMOT;
+	guillemot->dev.idproduct = guillemot_type[i].id;
+	guillemot->dev.idversion = (int)data[14] << 8 | data[15];
+
+	guillemot->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+	for (i = 0; (t = guillemot->type->abs[i]) >= 0; i++) {
+		set_bit(t, guillemot->dev.absbit);
+		guillemot->dev.absmin[t] = 0;
+		guillemot->dev.absmax[t] = 255;
+	}
+
+	if (guillemot->type->hat) 
+		for (i = 0; i < 2; i++) {
+			t = ABS_HAT0X + i;
+			set_bit(t, guillemot->dev.absbit);
+			guillemot->dev.absmin[t] = -1;
+			guillemot->dev.absmax[t] = 1;
+		}
+
+	for (i = 0; (t = guillemot->type->btn[i]) >= 0; i++)
+		set_bit(t, guillemot->dev.keybit);
+
+	input_register_device(&guillemot->dev);
+	printk(KERN_INFO "input: %s ver %d.%02d on %s\n",
+		guillemot->type->name, data[14], data[15], gameport->phys);
+
+	return;
+fail2:	gameport_close(gameport);
+fail1:  kfree(guillemot);
+}
+
+static void guillemot_disconnect(struct gameport *gameport)
+{
+	struct guillemot *guillemot = gameport->private;
+	printk(KERN_INFO "guillemot.c: Failed %d reads out of %d on %s\n", guillemot->reads, guillemot->bads, guillemot->phys);
+	input_unregister_device(&guillemot->dev);
+	gameport_close(gameport);
+	kfree(guillemot);
+}
+
+static struct gameport_dev guillemot_dev = {
+	connect:	guillemot_connect,
+	disconnect:	guillemot_disconnect,
+};
+
+int __init guillemot_init(void)
+{
+	gameport_register_device(&guillemot_dev);
+	return 0;
+}
+
+void __exit guillemot_exit(void)
+{
+	gameport_unregister_device(&guillemot_dev);
+}
+
+module_init(guillemot_init);
+module_exit(guillemot_exit);

drivers/input/joystick/iforce.c

-/*
- * $Id: iforce.c,v 1.56 2001/05/27 14:41:26 jdeneux Exp $
- *
- *  Copyright (c) 2000-2001 Vojtech Pavlik <vojtech@suse.cz>
- *  Copyright (c) 2001 Johann Deneux <deneux@ifrance.com>
- *
- *  USB/RS232 I-Force joysticks and wheels.
- *
- *  Sponsored by SuSE
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Should you need to contact me, the author, you can do so either by
- * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
- * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/usb.h>
-#include <linux/serio.h>
-#include <linux/config.h>
-
-/* FF: This module provides arbitrary resource management routines.
- * I use it to manage the device's memory.
- * Despite the name of this module, I am *not* going to access the ioports.
- */
-#include <linux/ioport.h>
-
-MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>, Johann Deneux <deneux@ifrance.com>");
-MODULE_DESCRIPTION("USB/RS232 I-Force joysticks and wheels driver");
-MODULE_LICENSE("GPL");
-
-#define IFORCE_MAX_LENGTH	16
-
-#if defined(CONFIG_JOYSTICK_IFORCE_232) || defined(CONFIG_JOYSTICK_IFORCE_232_MODULE)
-#define IFORCE_232	1
-#endif
-#if defined(CONFIG_JOYSTICK_IFORCE_USB) || defined(CONFIG_JOYSTICK_IFORCE_USB_MODULE)
-#define IFORCE_USB	2
-#endif
-
-#define FF_EFFECTS_MAX	32
-
-/* Each force feedback effect is made of one core effect, which can be
- * associated to at most to effect modifiers
- */
-#define FF_MOD1_IS_USED		0
-#define FF_MOD2_IS_USED		1
-#define FF_CORE_IS_USED		2
-#define FF_CORE_IS_PLAYED	3
-#define FF_MODCORE_MAX		3
-
-struct iforce_core_effect {
-	/* Information about where modifiers are stored in the device's memory */
-	struct resource mod1_chunk;
-	struct resource mod2_chunk;
-	unsigned long flags[NBITS(FF_MODCORE_MAX)];
-};
-
-#define FF_CMD_EFFECT		0x010e
-#define FF_CMD_SHAPE		0x0208
-#define FF_CMD_MAGNITUDE	0x0303
-#define FF_CMD_PERIOD		0x0407
-#define FF_CMD_INTERACT		0x050a
-
-#define FF_CMD_AUTOCENTER	0x4002
-#define FF_CMD_PLAY		0x4103
-#define FF_CMD_ENABLE		0x4201
-#define FF_CMD_GAIN		0x4301
-
-#define FF_CMD_QUERY		0xff01
-
-static signed short btn_joystick[] = { BTN_TRIGGER, BTN_TOP, BTN_THUMB, BTN_TOP2, BTN_BASE,
-	BTN_BASE2, BTN_BASE3, BTN_BASE4, BTN_BASE5, BTN_A, BTN_B, BTN_C, BTN_DEAD, -1 };
-static signed short btn_wheel[] =    { BTN_TRIGGER, BTN_TOP, BTN_THUMB, BTN_TOP2, BTN_BASE,
-	BTN_BASE2, BTN_BASE3, BTN_BASE4, BTN_BASE5, BTN_A, BTN_B, BTN_C, -1 };
-static signed short abs_joystick[] = { ABS_X, ABS_Y, ABS_THROTTLE, ABS_HAT0X, ABS_HAT0Y, -1 };
-static signed short abs_wheel[] =    { ABS_WHEEL, ABS_GAS, ABS_BRAKE, ABS_HAT0X, ABS_HAT0Y, -1 };
-static signed short ff_iforce[] =    { FF_PERIODIC, FF_CONSTANT, FF_SPRING, FF_FRICTION,
-	FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP, FF_SAW_DOWN, FF_GAIN, FF_AUTOCENTER, -1 };
-
-static struct iforce_device {
-	u16 idvendor;
-	u16 idproduct;
-	char *name;
-	signed short *btn;
-	signed short *abs;
-	signed short *ff;
-} iforce_device[] = {
-	{ 0x046d, 0xc281, "Logitech WingMan Force",			btn_joystick, abs_joystick, ff_iforce },
-	{ 0x046d, 0xc291, "Logitech WingMan Formula Force",		btn_wheel, abs_wheel, ff_iforce },
-	{ 0x05ef, 0x020a, "AVB Top Shot Pegasus",			btn_joystick, abs_joystick, ff_iforce },
-	{ 0x05ef, 0x8884, "AVB Mag Turbo Force",			btn_wheel, abs_wheel, ff_iforce },
-	{ 0x06f8, 0x0001, "Guillemot Race Leader Force Feedback",	btn_wheel, abs_wheel, ff_iforce },
-	{ 0x0000, 0x0000, "Unknown I-Force Device [%04x:%04x]",		btn_joystick, abs_joystick, ff_iforce }
-};
-
-struct iforce {
-	struct input_dev dev;		/* Input device interface */
-	struct iforce_device *type;
-	char name[64];
-	int open;
-	int bus;
-
-	unsigned char data[IFORCE_MAX_LENGTH];
-	unsigned char edata[IFORCE_MAX_LENGTH];
-	u16 ecmd;
-	u16 expect_packet;
-
-#ifdef IFORCE_232
-	struct serio *serio;		/* RS232 transfer */
-	int idx, pkt, len, id;
-	unsigned char csum;
-#endif
-#ifdef IFORCE_USB
-	struct usb_device *usbdev;	/* USB transfer */
-	struct urb *irq, *out, *ctrl;
-	struct usb_ctrlrequest dr;
-#endif
-					/* Force Feedback */
-	wait_queue_head_t wait;
-	struct resource device_memory;
-	struct iforce_core_effect core_effects[FF_EFFECTS_MAX];
-};
-
-static struct {
-	__s32 x;
-	__s32 y;
-} iforce_hat_to_axis[16] = {{ 0,-1}, { 1,-1}, { 1, 0}, { 1, 1}, { 0, 1}, {-1, 1}, {-1, 0}, {-1,-1}};
-
-/* Get hi and low bytes of a 16-bits int */
-#define HI(a)	((unsigned char)((a) >> 8))
-#define LO(a)	((unsigned char)((a) & 0xff))
-
-/* Encode a time value */
-#define TIME_SCALE(a)	((a) == 0xffff ? 0xffff : (a) * 1000 / 256)
-
-static void dump_packet(char *msg, u16 cmd, unsigned char *data)
-{
-	int i;
-
-	printk(KERN_DEBUG "iforce.c: %s ( cmd = %04x, data = ", msg, cmd);
-	for (i = 0; i < LO(cmd); i++)
-		printk("%02x ", data[i]);
-	printk(")\n");
-}
-
-/*
- * Send a packet of bytes to the device
- */
-static void send_packet(struct iforce *iforce, u16 cmd, unsigned char* data)
-{
-	switch (iforce->bus) {
-
-#ifdef IFORCE_232
-		case IFORCE_232: {
-
-			int i;
-			unsigned char csum = 0x2b ^ HI(cmd) ^ LO(cmd);
-
-			serio_write(iforce->serio, 0x2b);
-			serio_write(iforce->serio, HI(cmd));
-			serio_write(iforce->serio, LO(cmd));
-
-			for (i = 0; i < LO(cmd); i++) {
-				serio_write(iforce->serio, data[i]);
-				csum = csum ^ data[i];
-			}
-
-			serio_write(iforce->serio, csum);
-			return;
-		}
-#endif
-#ifdef IFORCE_USB
-		case IFORCE_USB: {
-
-			DECLARE_WAITQUEUE(wait, current);
-			int timeout = HZ; /* 1 second */
-
-			memcpy(iforce->out->transfer_buffer + 1, data, LO(cmd));
-			((char*)iforce->out->transfer_buffer)[0] = HI(cmd);
-			iforce->out->transfer_buffer_length = LO(cmd) + 2;
-			iforce->out->dev = iforce->usbdev;
-
-			set_current_state(TASK_INTERRUPTIBLE);
-			add_wait_queue(&iforce->wait, &wait);
-
-			if (usb_submit_urb(iforce->out, GFP_ATOMIC)) {
-				set_current_state(TASK_RUNNING);
-				remove_wait_queue(&iforce->wait, &wait);
-				return;
-			}
-
-			while (timeout && iforce->out->status == -EINPROGRESS)
-				timeout = schedule_timeout(timeout);
-
-			set_current_state(TASK_RUNNING);
-			remove_wait_queue(&iforce->wait, &wait);
-
-			if (!timeout)
-				usb_unlink_urb(iforce->out);
-
-			return;
-		}
-#endif
-	}
-}
-
-static void iforce_process_packet(struct iforce *iforce, u16 cmd, unsigned char *data)
-{
-	struct input_dev *dev = &iforce->dev;
-	int i;
-
-#ifdef IFORCE_232
-	if (HI(iforce->expect_packet) == HI(cmd)) {
-		iforce->expect_packet = 0;
-		iforce->ecmd = cmd;
-		memcpy(iforce->edata, data, IFORCE_MAX_LENGTH);
-		if (waitqueue_active(&iforce->wait))
-			wake_up(&iforce->wait);
-	}
-#endif
-
-	if (!iforce->type)
-		return;
-
-	switch (HI(cmd)) {
-
-		case 0x01:	/* joystick position data */
-		case 0x03:	/* wheel position data */
-
-			if (HI(cmd) == 1) {
-				input_report_abs(dev, ABS_X, (__s16) (((__s16)data[1] << 8) | data[0]));
-				input_report_abs(dev, ABS_Y, (__s16) (((__s16)data[3] << 8) | data[2]));
-				input_report_abs(dev, ABS_THROTTLE, 255 - data[4]);
-			} else {
-				input_report_abs(dev, ABS_WHEEL, (__s16) (((__s16)data[1] << 8) | data[0]));
-				input_report_abs(dev, ABS_GAS,   255 - data[2]);
-				input_report_abs(dev, ABS_BRAKE, 255 - data[3]);
-			}
-
-			input_report_abs(dev, ABS_HAT0X, iforce_hat_to_axis[data[6] >> 4].x);
-			input_report_abs(dev, ABS_HAT0Y, iforce_hat_to_axis[data[6] >> 4].y);
-
-			for (i = 0; iforce->type->btn[i] >= 0; i++)
-				input_report_key(dev, iforce->type->btn[i], data[(i >> 3) + 5] & (1 << (i & 7)));
-
-			break;
-
-		case 0x02:	/* status report */
-
-			input_report_key(dev, BTN_DEAD, data[0] & 0x02);
-			break;
-	}
-}
-
-static int get_id_packet(struct iforce *iforce, char *packet)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	int timeout = HZ; /* 1 second */
-
-	switch (iforce->bus) {
-
-#ifdef IFORCE_USB
-		case IFORCE_USB:
-
-			iforce->dr.bRequest = packet[0];
-			iforce->ctrl->dev = iforce->usbdev;
-
-			set_current_state(TASK_INTERRUPTIBLE);
-			add_wait_queue(&iforce->wait, &wait);
-
-			if (usb_submit_urb(iforce->ctrl, GFP_ATOMIC)) {
-				set_current_state(TASK_RUNNING);
-				remove_wait_queue(&iforce->wait, &wait);
-				return -1;
-			}
-
-			while (timeout && iforce->ctrl->status == -EINPROGRESS)
-				timeout = schedule_timeout(timeout);
-
-			set_current_state(TASK_RUNNING);
-			remove_wait_queue(&iforce->wait, &wait);
-
-			if (!timeout) {
-				usb_unlink_urb(iforce->ctrl);
-				return -1;
-			}
-
-			break;
-#endif
-#ifdef IFORCE_232
-		case IFORCE_232:
-
-			iforce->expect_packet = FF_CMD_QUERY;
-			send_packet(iforce, FF_CMD_QUERY, packet);
-
-			set_current_state(TASK_INTERRUPTIBLE);
-			add_wait_queue(&iforce->wait, &wait);
-
-			while (timeout && iforce->expect_packet)
-				timeout = schedule_timeout(timeout);
-
-			set_current_state(TASK_RUNNING);
-			remove_wait_queue(&iforce->wait, &wait);
-
-			if (!timeout) {
-				iforce->expect_packet = 0;
-				return -1;
-			}
-
-			break;
-#endif
-	}
-
-	return -(iforce->edata[0] != packet[0]);
-}
-
-static int iforce_open(struct input_dev *dev)
-{
-	struct iforce *iforce = dev->private;
-
-	switch (iforce->bus) {
-#ifdef IFORCE_USB
-		case IFORCE_USB:
-			if (iforce->open++)
-				break;
-			iforce->irq->dev = iforce->usbdev;
-			if (usb_submit_urb(iforce->irq, GFP_KERNEL))
-					return -EIO;
-			break;
-#endif
-	}
-	return 0;
-}
-
-static void iforce_close(struct input_dev *dev)
-{
-	struct iforce *iforce = dev->private;
-
-	switch (iforce->bus) {
-#ifdef IFORCE_USB
-		case IFORCE_USB:
-			if (!--iforce->open)
-				usb_unlink_urb(iforce->irq);
-			break;
-#endif
-	}
-}
-
-/*
- * Start or stop playing an effect
- */
-
-static int iforce_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-{
-	struct iforce* iforce = (struct iforce*)(dev->private);
-	unsigned char data[3];
-
-	printk(KERN_DEBUG "iforce.c: input_event(type = %d, code = %d, value = %d)\n", type, code, value);
-
-	if (type != EV_FF)
-		return -1;
-
-	switch (code) {
-
-		case FF_GAIN:
-
-			data[0] = value >> 9;
-			send_packet(iforce, FF_CMD_GAIN, data);
-
-			return 0;
-
-		case FF_AUTOCENTER:
-
-			data[0] = 0x03;
-			data[1] = value >> 9;
-			send_packet(iforce, FF_CMD_AUTOCENTER, data);
-
-			data[0] = 0x04;
-			data[1] = 0x01;
-			send_packet(iforce, FF_CMD_AUTOCENTER, data);
-
-			return 0;
-
-		default: /* Play an effect */
-
-			if (code >= iforce->dev.ff_effects_max)
-				return -1;
-
-			data[0] = LO(code);
-			data[1] = (value > 0) ? ((value > 1) ? 0x41 : 0x01) : 0;
-			data[2] = LO(value);
-			send_packet(iforce, FF_CMD_PLAY, data);
-
-			return 0;
-	}
-
-	return -1;
-}
-
-/*
- * Set the magnitude of a constant force effect
- * Return error code
- *
- * Note: caller must ensure exclusive access to device
- */
-
-static int make_magnitude_modifier(struct iforce* iforce,
-	struct resource* mod_chunk, __s16 level)
-{
-	unsigned char data[3];
-
-	if (allocate_resource(&(iforce->device_memory), mod_chunk, 2,
-		iforce->device_memory.start, iforce->device_memory.end, 2L,
-		NULL, NULL)) {
-		return -ENOMEM;
-	}
-
-	data[0] = LO(mod_chunk->start);
-	data[1] = HI(mod_chunk->start);
-	data[2] = HI(level);
-
-	send_packet(iforce, FF_CMD_MAGNITUDE, data);
-
-	return 0;
-}
-
-/*
- * Upload the component of an effect dealing with the period, phase and magnitude
- */
-
-static int make_period_modifier(struct iforce* iforce, struct resource* mod_chunk,
-	__s16 magnitude, __s16 offset, u16 period, u16 phase)
-{
-	unsigned char data[7];
-
-	period = TIME_SCALE(period);
-
-	if (allocate_resource(&(iforce->device_memory), mod_chunk, 0x0c,
-		iforce->device_memory.start, iforce->device_memory.end, 2L,
-		NULL, NULL)) {
-		return -ENOMEM;
-	}
-
-	data[0] = LO(mod_chunk->start);
-	data[1] = HI(mod_chunk->start);
-
-	data[2] = HI(magnitude);
-	data[3] = HI(offset);
-	data[4] = HI(phase);
-
-	data[5] = LO(period);
-	data[6] = HI(period);
-
-	send_packet(iforce, FF_CMD_PERIOD, data);
-
-	return 0;
-}
-
-/*
- * Uploads the part of an effect setting the shape of the force
- */
-
-static int make_shape_modifier(struct iforce* iforce, struct resource* mod_chunk,
-	u16 attack_duration, __s16 initial_level,
-	u16 fade_duration, __s16 final_level)
-{
-	unsigned char data[8];
-
-	attack_duration = TIME_SCALE(attack_duration);
-	fade_duration = TIME_SCALE(fade_duration);
-
-	if (allocate_resource(&(iforce->device_memory), mod_chunk, 0x0e,
-		iforce->device_memory.start, iforce->device_memory.end, 2L,
-		NULL, NULL)) {
-		return -ENOMEM;
-	}
-
-	data[0] = LO(mod_chunk->start);
-	data[1] = HI(mod_chunk->start);
-
-	data[2] = LO(attack_duration);
-	data[3] = HI(attack_duration);
-	data[4] = HI(initial_level);
-
-	data[5] = LO(fade_duration);
-	data[6] = HI(fade_duration);
-	data[7] = HI(final_level);
-
-	send_packet(iforce, FF_CMD_SHAPE, data);
-
-	return 0;
-}
-
-/*
- * Component of spring, friction, inertia... effects
- */
-
-static int make_interactive_modifier(struct iforce* iforce,
-	struct resource* mod_chunk,
-	__s16 rsat, __s16 lsat, __s16 rk, __s16 lk, u16 db, __s16 center)
-{
-	unsigned char data[10];
-
-	if (allocate_resource(&(iforce->device_memory), mod_chunk, 8,
-		iforce->device_memory.start, iforce->device_memory.end, 2L,
-		NULL, NULL)) {
-		return -ENOMEM;
-	}
-
-	data[0] = LO(mod_chunk->start);
-	data[1] = HI(mod_chunk->start);
-
-	data[2] = HI(rk);
-	data[3] = HI(lk);
-
-	data[4] = LO(center);
-	data[5] = HI(center);
-
-	data[6] = LO(db);
-	data[7] = HI(db);
-
-	data[8] = HI(rsat);
-	data[9] = HI(lsat);
-
-	send_packet(iforce, FF_CMD_INTERACT, data);
-
-	return 0;
-}
-
-static unsigned char find_button(struct iforce *iforce, signed short button)
-{
-	int i;
-	for (i = 1; iforce->type->btn[i] >= 0; i++)
-		if (iforce->type->btn[i] == button)
-			return i + 1;
-	return 0;
-}
-
-/*
- * Send the part common to all effects to the device
- */
-
-static int make_core(struct iforce* iforce, u16 id, u16 mod_id1, u16 mod_id2,
-	u8 effect_type, u8 axes, u16 duration, u16 delay, u16 button,
-	u16 interval, u16 direction)
-{
-	unsigned char data[14];
-
-	duration = TIME_SCALE(duration);
-	delay    = TIME_SCALE(delay);
-	interval = TIME_SCALE(interval);
-
-	data[0]  = LO(id);
-	data[1]  = effect_type;
-	data[2]  = LO(axes) | find_button(iforce, button);
-
-	data[3]  = LO(duration);
-	data[4]  = HI(duration);
-
-	data[5]  = HI(direction);
-
-	data[6]  = LO(interval);
-	data[7]  = HI(interval);
-
-	data[8]  = LO(mod_id1);
-	data[9]  = HI(mod_id1);
-	data[10] = LO(mod_id2);
-	data[11] = HI(mod_id2);
-
-	data[12] = LO(delay);
-	data[13] = HI(delay);
-
-	send_packet(iforce, FF_CMD_EFFECT, data);
-
-	return 0;
-}
-
-/*
- * Upload a periodic effect to the device
- */
-
-static int iforce_upload_periodic(struct iforce* iforce, struct ff_effect* effect)
-{
-	u8 wave_code;
-	int core_id = effect->id;
-	struct iforce_core_effect* core_effect = iforce->core_effects + core_id;
-	struct resource* mod1_chunk = &(iforce->core_effects[core_id].mod1_chunk);
-	struct resource* mod2_chunk = &(iforce->core_effects[core_id].mod2_chunk);
-	int err = 0;
-
-	err = make_period_modifier(iforce, mod1_chunk,
-		effect->u.periodic.magnitude, effect->u.periodic.offset,
-		effect->u.periodic.period, effect->u.periodic.phase);
-	if (err) return err;
-	set_bit(FF_MOD1_IS_USED, core_effect->flags);
-
-	err = make_shape_modifier(iforce, mod2_chunk,
-		effect->u.periodic.shape.attack_length,
-		effect->u.periodic.shape.attack_level,
-		effect->u.periodic.shape.fade_length,
-		effect->u.periodic.shape.fade_level);
-	if (err) return err;
-	set_bit(FF_MOD2_IS_USED, core_effect->flags);
-
-	switch (effect->u.periodic.waveform) {
-		case FF_SQUARE:		wave_code = 0x20; break;
-		case FF_TRIANGLE:	wave_code = 0x21; break;
-		case FF_SINE:		wave_code = 0x22; break;
-		case FF_SAW_UP:		wave_code = 0x23; break;
-		case FF_SAW_DOWN:	wave_code = 0x24; break;
-		default:		wave_code = 0x20; break;
-	}
-
-	err = make_core(iforce, effect->id,
-		mod1_chunk->start,
-		mod2_chunk->start,
-		wave_code,
-		0x20,
-		effect->replay.length,
-		effect->replay.delay,
-		effect->trigger.button,
-		effect->trigger.interval,
-		effect->direction);
-
-	return err;
-}
-
-/*
- * Upload a constant force effect
- */
-static int iforce_upload_constant(struct iforce* iforce, struct ff_effect* effect)
-{
-	int core_id = effect->id;
-	struct iforce_core_effect* core_effect = iforce->core_effects + core_id;
-	struct resource* mod1_chunk = &(iforce->core_effects[core_id].mod1_chunk);
-	struct resource* mod2_chunk = &(iforce->core_effects[core_id].mod2_chunk);
-	int err = 0;
-
-	printk(KERN_DEBUG "iforce.c: make constant effect\n");
-
-	err = make_magnitude_modifier(iforce, mod1_chunk, effect->u.constant.level);
-	if (err) return err;
-	set_bit(FF_MOD1_IS_USED, core_effect->flags);
-
-	err = make_shape_modifier(iforce, mod2_chunk,
-		effect->u.constant.shape.attack_length,
-		effect->u.constant.shape.attack_level,
-		effect->u.constant.shape.fade_length,
-		effect->u.constant.shape.fade_level);
-	if (err) return err;
-	set_bit(FF_MOD2_IS_USED, core_effect->flags);
-
-	err = make_core(iforce, effect->id,
-		mod1_chunk->start,
-		mod2_chunk->start,
-		0x00,
-		0x20,
-		effect->replay.length,
-		effect->replay.delay,
-		effect->trigger.button,
-		effect->trigger.interval,
-		effect->direction);
-
-	return err;
-}
-
-/*
- * Upload an interactive effect. Those are for example friction, inertia, springs...
- */
-static int iforce_upload_interactive(struct iforce* iforce, struct ff_effect* effect)
-{
-	int core_id = effect->id;
-	struct iforce_core_effect* core_effect = iforce->core_effects + core_id;
-	struct resource* mod_chunk = &(core_effect->mod1_chunk);
-	u8 type, axes;
-	u16 mod1, mod2, direction;
-	int err = 0;
-
-	printk(KERN_DEBUG "iforce.c: make interactive effect\n");
-
-	switch (effect->type) {
-		case FF_SPRING:		type = 0x40; break;
-		case FF_FRICTION:	type = 0x41; break;
-		default: return -1;
-	}
-
-	err = make_interactive_modifier(iforce, mod_chunk,
-		effect->u.interactive.right_saturation,
-		effect->u.interactive.left_saturation,
-		effect->u.interactive.right_coeff,
-		effect->u.interactive.left_coeff,
-		effect->u.interactive.deadband,
-		effect->u.interactive.center);
-	if (err) return err;
-	set_bit(FF_MOD1_IS_USED, core_effect->flags);
-
-	switch ((test_bit(ABS_X, &effect->u.interactive.axis) ||
-		test_bit(ABS_WHEEL, &effect->u.interactive.axis)) |
-		(!!test_bit(ABS_Y, &effect->u.interactive.axis) << 1)) {
-
-		case 0: /* Only one axis, choose orientation */
-			mod1 = mod_chunk->start;
-			mod2 = 0xffff;
-			direction = effect->direction;
-			axes = 0x20;
-			break;
-
-		case 1:	/* Only X axis */
-			mod1 = mod_chunk->start;
-			mod2 = 0xffff;
-			direction = 0x5a00;
-			axes = 0x40;
-			break;
-
-		case 2: /* Only Y axis */
-			mod1 = 0xffff;
-			mod2 = mod_chunk->start;
-			direction = 0xb400;
-			axes = 0x80;
-			break;
-
-		case 3:	/* Both X and Y axes */
-			/* TODO: same setting for both axes is not mandatory */
-			mod1 = mod_chunk->start;
-			mod2 = mod_chunk->start;
-			direction = 0x6000;
-			axes = 0xc0;
-			break;
-
-		default:
-			return -1;
-	}
-
-	err = make_core(iforce, effect->id,
-		mod1, mod2,
-		type, axes,
-		effect->replay.length, effect->replay.delay,
-		effect->trigger.button, effect->trigger.interval,
-		direction);
-
-	return err;
-}
-
-/*
- * Function called when an ioctl is performed on the event dev entry.
- * It uploads an effect to the device
- */
-static int iforce_upload_effect(struct input_dev *dev, struct ff_effect *effect)
-{
-	struct iforce* iforce = (struct iforce*)(dev->private);
-	int id;
-
-	printk(KERN_DEBUG "iforce.c: upload effect\n");
-
-/*
- * Get a free id
- */
-
-	for (id=0; id < FF_EFFECTS_MAX; ++id)
-		if (!test_bit(FF_CORE_IS_USED, iforce->core_effects[id].flags)) break;
-
-	if ( id == FF_EFFECTS_MAX || id >= iforce->dev.ff_effects_max)
-		return -ENOMEM;
-
-	effect->id = id;
-	set_bit(FF_CORE_IS_USED, iforce->core_effects[id].flags);
-
-/*
- * Upload the effect
- */
-
-	switch (effect->type) {
-
-		case FF_PERIODIC:
-			return iforce_upload_periodic(iforce, effect);
-
-		case FF_CONSTANT:
-			return iforce_upload_constant(iforce, effect);
-
-		case FF_SPRING:
-		case FF_FRICTION:
-			return iforce_upload_interactive(iforce, effect);
-
-		default:
-			return -1;
-	}
-}
-
-/*
- * Erases an effect: it frees the effect id and mark as unused the memory
- * allocated for the parameters
- */
-static int iforce_erase_effect(struct input_dev *dev, int effect_id)
-{
-	struct iforce* iforce = (struct iforce*)(dev->private);
-	int err = 0;
-	struct iforce_core_effect* core_effect;
-
-	printk(KERN_DEBUG "iforce.c: erase effect %d\n", effect_id);
-
-	if (effect_id < 0 || effect_id >= FF_EFFECTS_MAX)
-		return -EINVAL;
-
-	core_effect = iforce->core_effects + effect_id;
-
-	if (test_bit(FF_MOD1_IS_USED, core_effect->flags))
-		err = release_resource(&(iforce->core_effects[effect_id].mod1_chunk));
-
-	if (!err && test_bit(FF_MOD2_IS_USED, core_effect->flags))
-		err = release_resource(&(iforce->core_effects[effect_id].mod2_chunk));
-
-	/*TODO: remember to change that if more FF_MOD* bits are added */
-	core_effect->flags[0] = 0;
-
-	return err;
-}
-static int iforce_init_device(struct iforce *iforce)
-{
-	unsigned char c[] = "CEOV";
-	int i;
-
-	init_waitqueue_head(&iforce->wait);
-	iforce->dev.ff_effects_max = 10;
-
-/*
- * Input device fields.
- */
-
-	iforce->dev.idbus = BUS_USB;
-	iforce->dev.private = iforce;
-	iforce->dev.name = iforce->name;
-	iforce->dev.open = iforce_open;
-	iforce->dev.close = iforce_close;
-	iforce->dev.event = iforce_input_event;
-	iforce->dev.upload_effect = iforce_upload_effect;
-	iforce->dev.erase_effect = iforce_erase_effect;
-
-/*
- * On-device memory allocation.
- */
-
-	iforce->device_memory.name = "I-Force device effect memory";
-	iforce->device_memory.start = 0;
-	iforce->device_memory.end = 200;
-	iforce->device_memory.flags = IORESOURCE_MEM;
-	iforce->device_memory.parent = NULL;
-	iforce->device_memory.child = NULL;
-	iforce->device_memory.sibling = NULL;
-
-/*
- * Wait until device ready - until it sends its first response.
- */
-
-	for (i = 0; i < 20; i++)
-		if (!get_id_packet(iforce, "O"))
-			break;
-
-	if (i == 20) { /* 5 seconds */
-		printk(KERN_ERR "iforce.c: Timeout waiting for response from device.\n");
-		iforce_close(&iforce->dev);
-		return -1;
-	}
-
-/*
- * Get device info.
- */
-
-	if (!get_id_packet(iforce, "M"))
-		iforce->dev.idvendor = (iforce->edata[2] << 8) | iforce->edata[1];
-	if (!get_id_packet(iforce, "P"))
-		iforce->dev.idproduct = (iforce->edata[2] << 8) | iforce->edata[1];
-	if (!get_id_packet(iforce, "B"))
-		iforce->device_memory.end = (iforce->edata[2] << 8) | iforce->edata[1];
-	if (!get_id_packet(iforce, "N"))
-		iforce->dev.ff_effects_max = iforce->edata[1];
-
-/*
- * Display additional info.
- */
-
-	for (i = 0; c[i]; i++)
-		if (!get_id_packet(iforce, c + i))
-			dump_packet("info", iforce->ecmd, iforce->edata);
-
-/*
- * Disable spring, enable force feedback.
- * FIXME: We should use iforce_set_autocenter() et al here.
- */
-
-	send_packet(iforce, FF_CMD_AUTOCENTER, "\004\000");
-	send_packet(iforce, FF_CMD_ENABLE, "\004");
-
-/*
- * Find appropriate device entry
- */
-
-	for (i = 0; iforce_device[i].idvendor; i++)
-		if (iforce_device[i].idvendor == iforce->dev.idvendor &&
-		    iforce_device[i].idproduct == iforce->dev.idproduct)
-			break;
-
-	iforce->type = iforce_device + i;
-
-	sprintf(iforce->name, iforce->type->name,
-		iforce->dev.idproduct, iforce->dev.idvendor);
-
-/*
- * Set input device bitfields and ranges.
- */
-
-	iforce->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_FF);
-
-	for (i = 0; iforce->type->btn[i] >= 0; i++) {
-		signed short t = iforce->type->btn[i];
-		set_bit(t, iforce->dev.keybit);
-		if (t != BTN_DEAD)
-			set_bit(FF_BTN(t), iforce->dev.ffbit);
-	}
-
-	for (i = 0; iforce->type->abs[i] >= 0; i++) {
-
-		signed short t = iforce->type->abs[i];
-		set_bit(t, iforce->dev.absbit);
-
-		switch (t) {
-
-			case ABS_X:
-			case ABS_Y:
-			case ABS_WHEEL:
-
-				iforce->dev.absmax[t] =  1920;
-				iforce->dev.absmin[t] = -1920;
-				iforce->dev.absflat[t] = 128;
-				iforce->dev.absfuzz[t] = 16;
-
-				set_bit(FF_ABS(t), iforce->dev.ffbit);
-				break;
-
-			case ABS_THROTTLE:
-			case ABS_GAS:
-			case ABS_BRAKE:
-
-				iforce->dev.absmax[t] = 255;
-				iforce->dev.absmin[t] = 0;
-				break;
-
-			case ABS_HAT0X:
-			case ABS_HAT0Y:
-				iforce->dev.absmax[t] =  1;
-				iforce->dev.absmin[t] = -1;
-				break;
-		}
-	}
-
-	for (i = 0; iforce->type->ff[i] >= 0; i++)
-		set_bit(iforce->type->ff[i], iforce->dev.ffbit);
-
-/*
- * Register input device.
- */
-
-	input_register_device(&iforce->dev);
-
-	return 0;
-}
-
-#ifdef IFORCE_USB
-
-static void iforce_usb_irq(struct urb *urb)
-{
-	struct iforce *iforce = urb->context;
-	if (urb->status) return;
-	iforce_process_packet(iforce,
-		(iforce->data[0] << 8) | (urb->actual_length - 1), iforce->data + 1);
-}
-
-static void iforce_usb_out(struct urb *urb)
-{
-	struct iforce *iforce = urb->context;
-	if (urb->status) return;
-	if (waitqueue_active(&iforce->wait))
-		wake_up(&iforce->wait);
-}
-
-static void iforce_usb_ctrl(struct urb *urb)
-{
-	struct iforce *iforce = urb->context;
-	if (urb->status) return;
-	iforce->ecmd = 0xff00 | urb->actual_length;
-	if (waitqueue_active(&iforce->wait))
-		wake_up(&iforce->wait);
-}
-
-static void *iforce_usb_probe(struct usb_device *dev, unsigned int ifnum,
-				const struct usb_device_id *id)
-{
-	struct usb_endpoint_descriptor *epirq, *epout;
-	struct iforce *iforce;
-
-	epirq = dev->config[0].interface[ifnum].altsetting[0].endpoint + 0;
-	epout = dev->config[0].interface[ifnum].altsetting[0].endpoint + 1;
-
-	if (!(iforce = kmalloc(sizeof(struct iforce) + 32, GFP_KERNEL))) return NULL;
-	memset(iforce, 0, sizeof(struct iforce));
-
-	iforce->irq = usb_alloc_urb(0, GFP_KERNEL);
-	if (!iforce->irq) {
-		kfree(iforce);
-		return NULL;
-	}
-	iforce->out = usb_alloc_urb(0, GFP_KERNEL);
-	if (!iforce->out) {
-		usb_free_urb(iforce->irq);
-		kfree(iforce);
-		return NULL;
-	}
-	iforce->ctrl = usb_alloc_urb(0, GFP_KERNEL);
-	if (!iforce->ctrl) {
-		usb_free_urb(iforce->out);
-		usb_free_urb(iforce->irq);
-		kfree(iforce);
-		return NULL;
-	}
-
-	iforce->bus = IFORCE_USB;
-	iforce->usbdev = dev;
-
-	iforce->dr.bRequestType = USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_INTERFACE;
-	iforce->dr.wIndex = 0;
-	iforce->dr.wLength = 16;
-
-	FILL_INT_URB(iforce->irq, dev, usb_rcvintpipe(dev, epirq->bEndpointAddress),
-			iforce->data, 16, iforce_usb_irq, iforce, epirq->bInterval);
-
-	FILL_BULK_URB(iforce->out, dev, usb_sndbulkpipe(dev, epout->bEndpointAddress),
-			iforce + 1, 32, iforce_usb_out, iforce);
-
-	FILL_CONTROL_URB(iforce->ctrl, dev, usb_rcvctrlpipe(dev, 0),
-			(void*) &iforce->dr, iforce->edata, 16, iforce_usb_ctrl, iforce);
-
-	if (iforce_init_device(iforce)) {
-		usb_free_urb(iforce->ctrl);
-		usb_free_urb(iforce->out);
-		usb_free_urb(iforce->irq);
-		kfree(iforce);
-		return NULL;
-	}
-
-	printk(KERN_INFO "input%d: %s [%d effects, %ld bytes memory] on usb%d:%d.%d\n",
-		iforce->dev.number, iforce->dev.name, iforce->dev.ff_effects_max,
-		iforce->device_memory.end, dev->bus->busnum, dev->devnum, ifnum);
-
-	return iforce;
-}
-
-static void iforce_usb_disconnect(struct usb_device *dev, void *ptr)
-{
-	struct iforce *iforce = ptr;
-	usb_unlink_urb(iforce->irq);
-	input_unregister_device(&iforce->dev);
-	usb_free_urb(iforce->ctrl);
-	usb_free_urb(iforce->out);
-	usb_free_urb(iforce->irq);
-	kfree(iforce);
-}
-
-static struct usb_device_id iforce_usb_ids [] = {
-	{ USB_DEVICE(0x046d, 0xc281) },		/* Logitech WingMan Force */
-	{ USB_DEVICE(0x046d, 0xc291) },		/* Logitech WingMan Formula Force */
-	{ USB_DEVICE(0x05ef, 0x020a) },		/* AVB Top Shot Pegasus */
-	{ USB_DEVICE(0x05ef, 0x8884) },		/* AVB Mag Turbo Force */
-	{ USB_DEVICE(0x06f8, 0x0001) },		/* Guillemot Race Leader Force Feedback */
-	{ }					/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, iforce_usb_ids);
-
-static struct usb_driver iforce_usb_driver = {
-	name:		"iforce",
-	probe:		iforce_usb_probe,
-	disconnect:	iforce_usb_disconnect,
-	id_table:	iforce_usb_ids,
-};
-
-#endif
-
-#ifdef IFORCE_232
-
-static void iforce_serio_irq(struct serio *serio, unsigned char data, unsigned int flags)
-{
-	struct iforce* iforce = serio->private;
-
-	if (!iforce->pkt) {
-		if (data != 0x2b) {
-			return;
-		}
-		iforce->pkt = 1;
-		return;
-	}
-
-	if (!iforce->id) {
-		if (data > 3 && data != 0xff) {
-			iforce->pkt = 0;
-			return;
-		}
-		iforce->id = data;
-		return;
-	}
-
-	if (!iforce->len) {
-		if (data > IFORCE_MAX_LENGTH) {
-			iforce->pkt = 0;
-			iforce->id = 0;
-			return;
-		}
-		iforce->len = data;
-		return;
-	}
-
-	if (iforce->idx < iforce->len) {
-		iforce->csum += iforce->data[iforce->idx++] = data;
-		return;
-	}
-
-	if (iforce->idx == iforce->len) {
-		iforce_process_packet(iforce, (iforce->id << 8) | iforce->idx, iforce->data);
-		iforce->pkt = 0;
-		iforce->id  = 0;
-		iforce->len = 0;
-		iforce->idx = 0;
-		iforce->csum = 0;
-	}
-}
-
-static void iforce_serio_connect(struct serio *serio, struct serio_dev *dev)
-{
-	struct iforce *iforce;
-	if (serio->type != (SERIO_RS232 | SERIO_IFORCE))
-		return;
-
-	if (!(iforce = kmalloc(sizeof(struct iforce), GFP_KERNEL))) return;
-	memset(iforce, 0, sizeof(struct iforce));
-
-	iforce->bus = IFORCE_232;
-	iforce->serio = serio;
-	serio->private = iforce;
-
-	if (serio_open(serio, dev)) {
-		kfree(iforce);
-		return;
-	}
-
-	if (iforce_init_device(iforce)) {
-		serio_close(serio);
-		kfree(iforce);
-		return;
-	}
-
-	printk(KERN_INFO "input%d: %s [%d effects, %ld bytes memory] on serio%d\n",
-		iforce->dev.number, iforce->dev.name, iforce->dev.ff_effects_max,
-		iforce->device_memory.end, serio->number);
-}
-
-static void iforce_serio_disconnect(struct serio *serio)
-{
-	struct iforce* iforce = serio->private;
-
-	input_unregister_device(&iforce->dev);
-	serio_close(serio);
-	kfree(iforce);
-}
-
-static struct serio_dev iforce_serio_dev = {
-	interrupt:	iforce_serio_irq,
-	connect:	iforce_serio_connect,
-	disconnect:	iforce_serio_disconnect,
-};
-
-#endif
-
-static int __init iforce_init(void)
-{
-#ifdef IFORCE_USB
-	usb_register(&iforce_usb_driver);
-#endif
-#ifdef IFORCE_232
-	serio_register_device(&iforce_serio_dev);
-#endif
-	return 0;
-}
-
-static void __exit iforce_exit(void)
-{
-#ifdef IFORCE_USB
-	usb_deregister(&iforce_usb_driver);
-#endif
-#ifdef IFORCE_232
-	serio_unregister_device(&iforce_serio_dev);
-#endif
-}
-
-module_init(iforce_init);
-module_exit(iforce_exit);

drivers/input/joystick/iforce/Makefile

+#
+# Makefile for the I-Force driver
+#
+
+# I-Force may need both USB and RS-232
+
+CONFIG_JOYSTICK_IFORCE := n
+
+ifeq ($(CONFIG_JOYSTICK_IFORCE_232),y)
+	ifeq ($(CONFIG_JOYSTICK_IFORCE_USB),y)
+		CONFIG_JOYSTICK_IFORCE := y
+	endif
+endif
+
+ifeq ($(CONFIG_JOYSTICK_IFORCE_232),m)
+	CONFIG_JOYSTICK_IFORCE := m
+endif
+
+ifeq ($(CONFIG_JOYSTICK_IFORCE_USB),m)
+	CONFIG_JOYSTICK_IFORCE := m
+endif
+
+obj-$(CONFIG_JOYSTICK_IFORCE)	+= iforce.o 
+
+# The global Rules.make.
+
+include $(TOPDIR)/Rules.make
+
+# iforce.o is a multipart module.
+
+IFORCEOBJS = iforce-ff.o iforce-main.o iforce-packets.o
+
+ifneq ($(CONFIG_JOYSTICK_IFORCE_232),)
+	IFORCEOBJS += iforce-serio.o 
+endif
+
+ifneq ($(CONFIG_JOYSTICK_IFORCE_USB),)
+	IFORCEOBJS += iforce-usb.o 
+endif
+
+iforce.o: $(IFORCEOBJS) 
+	$(LD) -i $(IFORCEOBJS) -o $@

drivers/input/joystick/iforce/iforce-ff.c

+/*
+ * $Id: iforce-ff.c,v 1.9 2002/02/02 19:28:35 jdeneux Exp $
+ *
+ *  Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz>
+ *  Copyright (c) 2001-2002 Johann Deneux <deneux@ifrance.com>
+ *
+ *  USB/RS232 I-Force joysticks and wheels.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include "iforce.h"
+
+/*
+ * Set the magnitude of a constant force effect
+ * Return error code
+ *
+ * Note: caller must ensure exclusive access to device
+ */
+
+static int make_magnitude_modifier(struct iforce* iforce,
+	struct resource* mod_chunk, int no_alloc, __s16 level)
+{
+	unsigned char data[3];
+
+	if (!no_alloc) {
+		down(&iforce->mem_mutex);
+		if (allocate_resource(&(iforce->device_memory), mod_chunk, 2,
+			iforce->device_memory.start, iforce->device_memory.end, 2L,
+			NULL, NULL)) {
+			up(&iforce->mem_mutex);
+			return -ENOMEM;
+		}
+		up(&iforce->mem_mutex);
+	}
+
+	data[0] = LO(mod_chunk->start);
+	data[1] = HI(mod_chunk->start);
+	data[2] = HIFIX80(level);
+
+	iforce_send_packet(iforce, FF_CMD_MAGNITUDE, data);
+
+	iforce_dump_packet("magnitude: ", FF_CMD_MAGNITUDE, data);
+	return 0;
+}
+
+/*
+ * Upload the component of an effect dealing with the period, phase and magnitude
+ */
+
+static int make_period_modifier(struct iforce* iforce,
+	struct resource* mod_chunk, int no_alloc,
+	__s16 magnitude, __s16 offset, u16 period, u16 phase)
+{
+	unsigned char data[7];
+
+	period = TIME_SCALE(period);
+
+	if (!no_alloc) {
+		down(&iforce->mem_mutex);
+		if (allocate_resource(&(iforce->device_memory), mod_chunk, 0x0c,
+			iforce->device_memory.start, iforce->device_memory.end, 2L,
+			NULL, NULL)) {
+			up(&iforce->mem_mutex);
+			return -ENOMEM;
+		}
+		up(&iforce->mem_mutex);
+	}
+
+	data[0] = LO(mod_chunk->start);
+	data[1] = HI(mod_chunk->start);
+
+	data[2] = HIFIX80(magnitude);
+	data[3] = HIFIX80(offset);
+	data[4] = HI(phase);
+
+	data[5] = LO(period);
+	data[6] = HI(period);
+
+	iforce_send_packet(iforce, FF_CMD_PERIOD, data);
+
+	return 0;
+}
+
+/*
+ * Uploads the part of an effect setting the envelope of the force
+ */
+
+static int make_envelope_modifier(struct iforce* iforce,
+	struct resource* mod_chunk, int no_alloc,
+	u16 attack_duration, __s16 initial_level,
+	u16 fade_duration, __s16 final_level)
+{
+	unsigned char data[8];
+
+	attack_duration = TIME_SCALE(attack_duration);
+	fade_duration = TIME_SCALE(fade_duration);
+
+	if (!no_alloc) {
+		down(&iforce->mem_mutex);
+		if (allocate_resource(&(iforce->device_memory), mod_chunk, 0x0e,
+			iforce->device_memory.start, iforce->device_memory.end, 2L,
+			NULL, NULL)) {
+			up(&iforce->mem_mutex);
+			return -ENOMEM;
+		}
+		up(&iforce->mem_mutex);
+	}
+
+	data[0] = LO(mod_chunk->start);
+	data[1] = HI(mod_chunk->start);
+
+	data[2] = LO(attack_duration);
+	data[3] = HI(attack_duration);
+	data[4] = HI(initial_level);
+
+	data[5] = LO(fade_duration);
+	data[6] = HI(fade_duration);
+	data[7] = HI(final_level);
+
+	iforce_send_packet(iforce, FF_CMD_ENVELOPE, data);
+
+	return 0;
+}
+
+/*
+ * Component of spring, friction, inertia... effects
+ */
+
+static int make_condition_modifier(struct iforce* iforce,
+	struct resource* mod_chunk, int no_alloc,
+	__u16 rsat, __u16 lsat, __s16 rk, __s16 lk, u16 db, __s16 center)
+{
+	unsigned char data[10];
+
+	if (!no_alloc) {
+		down(&iforce->mem_mutex);
+		if (allocate_resource(&(iforce->device_memory), mod_chunk, 8,
+			iforce->device_memory.start, iforce->device_memory.end, 2L,
+			NULL, NULL)) {
+			up(&iforce->mem_mutex);
+			return -ENOMEM;
+		}
+		up(&iforce->mem_mutex);
+	}
+
+	data[0] = LO(mod_chunk->start);
+	data[1] = HI(mod_chunk->start);
+
+	data[2] = (100*rk)>>15;	/* Dangerous: the sign is extended by gcc on plateforms providing an arith shift */
+	data[3] = (100*lk)>>15; /* This code is incorrect on cpus lacking arith shift */
+
+	center = (500*center)>>15;
+	data[4] = LO(center);
+	data[5] = HI(center);
+
+	db = (1000*db)>>16;
+	data[6] = LO(db);
+	data[7] = HI(db);
+
+	data[8] = (100*rsat)>>16;
+	data[9] = (100*lsat)>>16;
+
+	iforce_send_packet(iforce, FF_CMD_CONDITION, data);
+	iforce_dump_packet("condition", FF_CMD_CONDITION, data);
+
+	return 0;
+}
+
+static unsigned char find_button(struct iforce *iforce, signed short button)
+{
+	int i;
+	for (i = 1; iforce->type->btn[i] >= 0; i++)
+		if (iforce->type->btn[i] == button)
+			return i + 1;
+	return 0;
+}
+
+/*
+ * Analyse the changes in an effect, and tell if we need to send an condition 
+ * parameter packet
+ */
+static int need_condition_modifier(struct iforce* iforce, struct ff_effect* new)
+{
+	int id = new->id;
+	struct ff_effect* old = &iforce->core_effects[id].effect;
+	int ret=0;
+	int i;
+
+	if (new->type != FF_SPRING && new->type != FF_FRICTION) {
+		printk(KERN_WARNING "iforce.c: bad effect type in need_condition_modifier\n");
+		return FALSE;
+	}
+
+	for(i=0; i<2; i++) {
+		ret |= old->u.condition[i].right_saturation != new->u.condition[i].right_saturation
+			|| old->u.condition[i].left_saturation != new->u.condition[i].left_saturation
+			|| old->u.condition[i].right_coeff != new->u.condition[i].right_coeff
+			|| old->u.condition[i].left_coeff != new->u.condition[i].left_coeff
+			|| old->u.condition[i].deadband != new->u.condition[i].deadband
+			|| old->u.condition[i].center != new->u.condition[i].center;
+	}
+	return ret;
+}
+
+/*
+ * Analyse the changes in an effect, and tell if we need to send a magnitude
+ * parameter packet
+ */
+static int need_magnitude_modifier(struct iforce* iforce, struct ff_effect* effect)
+{
+	int id = effect->id;
+	struct ff_effect* old = &iforce->core_effects[id].effect;
+
+	if (effect->type != FF_CONSTANT) {
+		printk(KERN_WARNING "iforce.c: bad effect type in need_envelope_modifier\n");
+		return FALSE;
+	}
+
+	return (old->u.constant.level != effect->u.constant.level);
+}
+
+/*
+ * Analyse the changes in an effect, and tell if we need to send an envelope
+ * parameter packet
+ */
+static int need_envelope_modifier(struct iforce* iforce, struct ff_effect* effect)
+{
+	int id = effect->id;
+	struct ff_effect* old = &iforce->core_effects[id].effect;
+
+	switch (effect->type) {
+	case FF_CONSTANT:
+		if (old->u.constant.envelope.attack_length != effect->u.constant.envelope.attack_length
+		|| old->u.constant.envelope.attack_level != effect->u.constant.envelope.attack_level
+		|| old->u.constant.envelope.fade_length != effect->u.constant.envelope.fade_length
+		|| old->u.constant.envelope.fade_level != effect->u.constant.envelope.fade_level)
+			return TRUE;
+		break;
+
+	case FF_PERIODIC:
+		if (old->u.periodic.envelope.attack_length != effect->u.periodic.envelope.attack_length
+		|| old->u.periodic.envelope.attack_level != effect->u.periodic.envelope.attack_level
+		|| old->u.periodic.envelope.fade_length != effect->u.periodic.envelope.fade_length
+		|| old->u.periodic.envelope.fade_level != effect->u.periodic.envelope.fade_level)
+			return TRUE;
+		break;
+
+	default:
+		printk(KERN_WARNING "iforce.c: bad effect type in need_envelope_modifier\n");
+	}
+
+	return FALSE;
+}
+
+/*
+ * Analyse the changes in an effect, and tell if we need to send a periodic
+ * parameter effect
+ */
+static int need_period_modifier(struct iforce* iforce, struct ff_effect* new)
+{
+	int id = new->id;
+	struct ff_effect* old = &iforce->core_effects[id].effect;
+
+	if (new->type != FF_PERIODIC) {
+		printk(KERN_WARNING "iforce.c: bad effect type in need_periodic_modifier\n");
+		return FALSE;
+	}
+
+	return (old->u.periodic.period != new->u.periodic.period
+		|| old->u.periodic.magnitude != new->u.periodic.magnitude
+		|| old->u.periodic.offset != new->u.periodic.offset
+		|| old->u.periodic.phase != new->u.periodic.phase);
+}
+
+/*
+ * Analyse the changes in an effect, and tell if we need to send an effect
+ * packet
+ */
+static int need_core(struct iforce* iforce, struct ff_effect* new)
+{
+	int id = new->id;
+	struct ff_effect* old = &iforce->core_effects[id].effect;
+
+	if (old->direction != new->direction
+		|| old->trigger.button != new->trigger.button
+		|| old->trigger.interval != new->trigger.interval
+		|| old->replay.length != new->replay.length
+		|| old->replay.delay != new->replay.delay)
+		return TRUE;
+
+	return FALSE;
+}
+/*
+ * Send the part common to all effects to the device
+ */
+static int make_core(struct iforce* iforce, u16 id, u16 mod_id1, u16 mod_id2,
+	u8 effect_type, u8 axes, u16 duration, u16 delay, u16 button,
+	u16 interval, u16 direction)
+{
+	unsigned char data[14];
+
+	duration = TIME_SCALE(duration);
+	delay    = TIME_SCALE(delay);
+	interval = TIME_SCALE(interval);
+
+	data[0]  = LO(id);
+	data[1]  = effect_type;
+	data[2]  = LO(axes) | find_button(iforce, button);
+
+	data[3]  = LO(duration);
+	data[4]  = HI(duration);
+
+	data[5]  = HI(direction);
+
+	data[6]  = LO(interval);
+	data[7]  = HI(interval);
+
+	data[8]  = LO(mod_id1);
+	data[9]  = HI(mod_id1);
+	data[10] = LO(mod_id2);
+	data[11] = HI(mod_id2);
+
+	data[12] = LO(delay);
+	data[13] = HI(delay);
+
+	/* Stop effect */
+/*	iforce_control_playback(iforce, id, 0);*/
+
+	iforce_send_packet(iforce, FF_CMD_EFFECT, data);
+
+	/* If needed, restart effect */
+	if (test_bit(FF_CORE_SHOULD_PLAY, iforce->core_effects[id].flags)) {
+		/* BUG: perhaps we should replay n times, instead of 1. But we do not know n */
+		iforce_control_playback(iforce, id, 1);
+	}
+
+	return 0;
+}
+
+/*
+ * Upload a periodic effect to the device
+ * See also iforce_upload_constant.
+ */
+int iforce_upload_periodic(struct iforce* iforce, struct ff_effect* effect, int is_update)
+{
+	u8 wave_code;
+	int core_id = effect->id;
+	struct iforce_core_effect* core_effect = iforce->core_effects + core_id;
+	struct resource* mod1_chunk = &(iforce->core_effects[core_id].mod1_chunk);
+	struct resource* mod2_chunk = &(iforce->core_effects[core_id].mod2_chunk);
+	int param1_err = 1;
+	int param2_err = 1;
+	int core_err = 0;
+
+	if (!is_update || need_period_modifier(iforce, effect)) {
+		param1_err = make_period_modifier(iforce, mod1_chunk, 
+			is_update,
+			effect->u.periodic.magnitude, effect->u.periodic.offset,
+			effect->u.periodic.period, effect->u.periodic.phase);
+		if (param1_err) return param1_err;
+		set_bit(FF_MOD1_IS_USED, core_effect->flags);
+	}
+
+	if (!is_update || need_envelope_modifier(iforce, effect)) {
+		param2_err = make_envelope_modifier(iforce, mod2_chunk,
+			is_update,
+			effect->u.periodic.envelope.attack_length,
+			effect->u.periodic.envelope.attack_level,
+			effect->u.periodic.envelope.fade_length,
+			effect->u.periodic.envelope.fade_level);
+		if (param2_err) return param2_err;
+		set_bit(FF_MOD2_IS_USED, core_effect->flags);
+	}
+
+	switch (effect->u.periodic.waveform) {
+		case FF_SQUARE:		wave_code = 0x20; break;
+		case FF_TRIANGLE:	wave_code = 0x21; break;
+		case FF_SINE:		wave_code = 0x22; break;
+		case FF_SAW_UP:		wave_code = 0x23; break;
+		case FF_SAW_DOWN:	wave_code = 0x24; break;
+		default:		wave_code = 0x20; break;
+	}
+
+	if (!is_update || need_core(iforce, effect)) {
+		core_err = make_core(iforce, effect->id,
+			mod1_chunk->start,
+			mod2_chunk->start,
+			wave_code,
+			0x20,
+			effect->replay.length,
+			effect->replay.delay,
+			effect->trigger.button,
+			effect->trigger.interval,
+			effect->direction);
+	}
+
+	/* If one of the parameter creation failed, we already returned an
+	 * error code.
+	 * If the core creation failed, we return its error code.
+	 * Else: if one parameter at least was created, we return 0
+	 *       else we return 1;
+	 */
+	return core_err < 0 ? core_err : (param1_err && param2_err);
+}
+
+/*
+ * Upload a constant force effect
+ * Return value:
+ *  <0 Error code
+ *  0 Ok, effect created or updated
+ *  1 effect did not change since last upload, and no packet was therefore sent
+ */
+int iforce_upload_constant(struct iforce* iforce, struct ff_effect* effect, int is_update)
+{
+	int core_id = effect->id;
+	struct iforce_core_effect* core_effect = iforce->core_effects + core_id;
+	struct resource* mod1_chunk = &(iforce->core_effects[core_id].mod1_chunk);
+	struct resource* mod2_chunk = &(iforce->core_effects[core_id].mod2_chunk);
+	int param1_err = 1;
+	int param2_err = 1;
+	int core_err = 0;
+
+	if (!is_update || need_magnitude_modifier(iforce, effect)) {
+		param1_err = make_magnitude_modifier(iforce, mod1_chunk,
+			is_update,
+			effect->u.constant.level);
+		if (param1_err) return param1_err;
+		set_bit(FF_MOD1_IS_USED, core_effect->flags);
+	}
+
+	if (!is_update || need_envelope_modifier(iforce, effect)) {
+		param2_err = make_envelope_modifier(iforce, mod2_chunk,
+			is_update,
+			effect->u.constant.envelope.attack_length,
+			effect->u.constant.envelope.attack_level,
+			effect->u.constant.envelope.fade_length,
+			effect->u.constant.envelope.fade_level);
+		if (param2_err) return param2_err;
+		set_bit(FF_MOD2_IS_USED, core_effect->flags);
+	}
+
+	if (!is_update || need_core(iforce, effect)) {
+		core_err = make_core(iforce, effect->id,
+			mod1_chunk->start,
+			mod2_chunk->start,
+			0x00,
+			0x20,
+			effect->replay.length,
+			effect->replay.delay,
+			effect->trigger.button,
+			effect->trigger.interval,
+			effect->direction);
+	}
+
+	/* If one of the parameter creation failed, we already returned an
+	 * error code.
+	 * If the core creation failed, we return its error code.
+	 * Else: if one parameter at least was created, we return 0
+	 *       else we return 1;
+	 */
+	return core_err < 0 ? core_err : (param1_err && param2_err);
+}
+
+/*
+ * Upload an condition effect. Those are for example friction, inertia, springs...
+ */
+int iforce_upload_condition(struct iforce* iforce, struct ff_effect* effect, int is_update)
+{
+	int core_id = effect->id;
+	struct iforce_core_effect* core_effect = iforce->core_effects + core_id;
+	struct resource* mod1_chunk = &(core_effect->mod1_chunk);
+	struct resource* mod2_chunk = &(core_effect->mod2_chunk);
+	u8 type;
+	int param_err = 1;
+	int core_err = 0;
+
+	switch (effect->type) {
+		case FF_SPRING:		type = 0x40; break;
+		case FF_DAMPER:		type = 0x41; break;
+		default: return -1;
+	}
+
+	if (!is_update || need_condition_modifier(iforce, effect)) {
+		param_err = make_condition_modifier(iforce, mod1_chunk,
+			is_update,
+			effect->u.condition[0].right_saturation,
+			effect->u.condition[0].left_saturation,
+			effect->u.condition[0].right_coeff,
+			effect->u.condition[0].left_coeff,
+			effect->u.condition[0].deadband,
+			effect->u.condition[0].center);
+		if (param_err) return param_err;
+		set_bit(FF_MOD1_IS_USED, core_effect->flags);
+
+		param_err = make_condition_modifier(iforce, mod2_chunk,
+			is_update,
+			effect->u.condition[1].right_saturation,
+			effect->u.condition[1].left_saturation,
+			effect->u.condition[1].right_coeff,
+			effect->u.condition[1].left_coeff,
+			effect->u.condition[1].deadband,
+			effect->u.condition[1].center);
+		if (param_err) return param_err;
+		set_bit(FF_MOD2_IS_USED, core_effect->flags);
+
+	}
+
+	if (!is_update || need_core(iforce, effect)) {
+		core_err = make_core(iforce, effect->id,
+			mod1_chunk->start, mod2_chunk->start,
+			type, 0xc0,
+			effect->replay.length, effect->replay.delay,
+			effect->trigger.button, effect->trigger.interval,
+			effect->direction);
+	}
+
+	/* If the parameter creation failed, we already returned an
+	 * error code.
+	 * If the core creation failed, we return its error code.
+	 * Else: if a parameter  was created, we return 0
+	 *       else we return 1;
+	 */
+	return core_err < 0 ? core_err : param_err;
+}

drivers/input/joystick/iforce/iforce-main.c

+/*
+ * $Id: iforce-main.c,v 1.18 2002/06/09 11:03:03 jdeneux Exp $
+ *
+ *  Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz>
+ *  Copyright (c) 2001-2002 Johann Deneux <deneux@ifrance.com>
+ *
+ *  USB/RS232 I-Force joysticks and wheels.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include "iforce.h"
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>, Johann Deneux <deneux@ifrance.com>");
+MODULE_DESCRIPTION("USB/RS232 I-Force joysticks and wheels driver");
+MODULE_LICENSE("GPL");
+
+static signed short btn_joystick[] =
+{ BTN_TRIGGER, BTN_TOP, BTN_THUMB, BTN_TOP2, BTN_BASE,
+  BTN_BASE2, BTN_BASE3, BTN_BASE4, BTN_BASE5, BTN_A, BTN_B, BTN_C, -1 };
+
+static signed short btn_avb_pegasus[] =
+{ BTN_TRIGGER, BTN_TOP, BTN_THUMB, BTN_TOP2, BTN_BASE,
+  BTN_BASE2, BTN_BASE3, BTN_BASE4, -1 };
+
+static signed short btn_wheel[] =
+{ BTN_TRIGGER, BTN_TOP, BTN_THUMB, BTN_TOP2, BTN_BASE,
+  BTN_BASE2, BTN_BASE3, BTN_BASE4, BTN_BASE5, BTN_A, BTN_B, BTN_C, -1 };
+
+static signed short btn_avb_tw[] =
+{ BTN_TRIGGER, BTN_THUMB, BTN_TOP, BTN_TOP2, BTN_BASE,
+  BTN_BASE2, BTN_BASE3, BTN_BASE4, -1 };
+
+static signed short btn_avb_wheel[] =
+{ BTN_GEAR_DOWN, BTN_GEAR_UP, BTN_BASE, BTN_BASE2, BTN_BASE3,
+  BTN_BASE4, BTN_BASE5, BTN_BASE6, -1 };
+
+static signed short abs_joystick[] =
+{ ABS_X, ABS_Y, ABS_THROTTLE, ABS_HAT0X, ABS_HAT0Y, -1 };
+
+static signed short abs_avb_pegasus[] =
+{ ABS_X, ABS_Y, ABS_THROTTLE, ABS_RUDDER, ABS_HAT0X, ABS_HAT0Y,
+  ABS_HAT1X, ABS_HAT1Y, -1 };
+
+static signed short abs_wheel[] =
+{ ABS_WHEEL, ABS_GAS, ABS_BRAKE, ABS_HAT0X, ABS_HAT0Y, -1 };
+
+static signed short ff_iforce[] =
+{ FF_PERIODIC, FF_CONSTANT, FF_SPRING, FF_DAMPER,
+  FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP, FF_SAW_DOWN, FF_GAIN,
+  FF_AUTOCENTER, -1 };
+
+static struct iforce_device iforce_device[] = {
+	{ 0x044f, 0xa01c, "Thrustmaster Motor Sport GT",		btn_wheel, abs_wheel, ff_iforce },
+	{ 0x046d, 0xc281, "Logitech WingMan Force",			btn_joystick, abs_joystick, ff_iforce },
+	{ 0x046d, 0xc291, "Logitech WingMan Formula Force",		btn_wheel, abs_wheel, ff_iforce },
+	{ 0x05ef, 0x020a, "AVB Top Shot Pegasus",			btn_avb_pegasus, abs_avb_pegasus, ff_iforce },
+	{ 0x05ef, 0x8884, "AVB Mag Turbo Force",			btn_avb_wheel, abs_wheel, ff_iforce },
+	{ 0x05ef, 0x8888, "AVB Top Shot Force Feedback Racing Wheel",	btn_avb_tw, abs_wheel, ff_iforce }, //?
+	{ 0x061c, 0xc0a4, "ACT LABS Force RS",                          btn_wheel, abs_wheel, ff_iforce }, //?
+	{ 0x06f8, 0x0001, "Guillemot Race Leader Force Feedback",	btn_wheel, abs_wheel, ff_iforce }, //?
+	{ 0x06f8, 0x0004, "Guillemot Force Feedback Racing Wheel",	btn_wheel, abs_wheel, ff_iforce }, //?
+	{ 0x0000, 0x0000, "Unknown I-Force Device [%04x:%04x]",		btn_joystick, abs_joystick, ff_iforce }
+};
+
+
+
+static int iforce_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
+{
+	struct iforce* iforce = (struct iforce*)(dev->private);
+	unsigned char data[3];
+
+	if (type != EV_FF)
+		return -1;
+
+	switch (code) {
+
+		case FF_GAIN:
+
+			data[0] = value >> 9;
+			iforce_send_packet(iforce, FF_CMD_GAIN, data);
+
+			return 0;
+
+		case FF_AUTOCENTER:
+
+			data[0] = 0x03;
+			data[1] = value >> 9;
+			iforce_send_packet(iforce, FF_CMD_AUTOCENTER, data);
+
+			data[0] = 0x04;
+			data[1] = 0x01;
+			iforce_send_packet(iforce, FF_CMD_AUTOCENTER, data);
+
+			return 0;
+
+		default: /* Play or stop an effect */
+
+			if (!CHECK_OWNERSHIP(code, iforce)) {
+				return -1;
+			}
+			if (value > 0) {
+				set_bit(FF_CORE_SHOULD_PLAY, iforce->core_effects[code].flags);
+			}
+			else {
+				clear_bit(FF_CORE_SHOULD_PLAY, iforce->core_effects[code].flags);
+			}
+
+			iforce_control_playback(iforce, code, value);
+			return 0;
+	}
+
+	return -1;
+}
+
+/*
+ * Function called when an ioctl is performed on the event dev entry.
+ * It uploads an effect to the device
+ */
+static int iforce_upload_effect(struct input_dev *dev, struct ff_effect *effect)
+{
+	struct iforce* iforce = (struct iforce*)(dev->private);
+	int id;
+	int ret;
+	int is_update;
+
+/* Check this effect type is supported by this device */
+	if (!test_bit(effect->type, iforce->dev.ffbit))
+		return -EINVAL;
+
+/*
+ * If we want to create a new effect, get a free id
+ */
+	if (effect->id == -1) {
+
+		for (id=0; id < FF_EFFECTS_MAX; ++id)
+			if (!test_and_set_bit(FF_CORE_IS_USED, iforce->core_effects[id].flags)) break;
+
+		if ( id == FF_EFFECTS_MAX || id >= iforce->dev.ff_effects_max)
+			return -ENOMEM;
+
+		effect->id = id;
+		iforce->core_effects[id].owner = current->pid;
+		iforce->core_effects[id].flags[0] = (1<<FF_CORE_IS_USED);	/* Only IS_USED bit must be set */
+
+		is_update = FALSE;
+	}
+	else {
+		/* We want to update an effect */
+		if (!CHECK_OWNERSHIP(effect->id, iforce)) return -EACCES;
+		
+		/* Parameter type cannot be updated */
+		if (effect->type != iforce->core_effects[effect->id].effect.type)
+			return -EINVAL;
+
+		/* Check the effect is not already being updated */
+		if (test_bit(FF_CORE_UPDATE, iforce->core_effects[effect->id].flags)) {
+			return -EAGAIN;
+		}
+
+		is_update = TRUE;
+	}
+
+/*
+ * Upload the effect
+ */
+	switch (effect->type) {
+
+		case FF_PERIODIC:
+			ret = iforce_upload_periodic(iforce, effect, is_update);
+			break;
+
+		case FF_CONSTANT:
+			ret = iforce_upload_constant(iforce, effect, is_update);
+			break;
+
+		case FF_SPRING:
+		case FF_DAMPER:
+			ret = iforce_upload_condition(iforce, effect, is_update);
+			break;
+
+		default:
+			return -EINVAL;
+	}
+	if (ret == 0) {
+		/* A packet was sent, forbid new updates until we are notified
+		 * that the packet was updated
+		 */
+		set_bit(FF_CORE_UPDATE, iforce->core_effects[effect->id].flags);
+	}
+	iforce->core_effects[effect->id].effect = *effect;
+	return ret;
+}
+
+/*
+ * Erases an effect: it frees the effect id and mark as unused the memory
+ * allocated for the parameters
+ */
+static int iforce_erase_effect(struct input_dev *dev, int effect_id)
+{
+	struct iforce* iforce = (struct iforce*)(dev->private);
+	int err = 0;
+	struct iforce_core_effect* core_effect;
+
+	/* Check who is trying to erase this effect */
+	if (iforce->core_effects[effect_id].owner != current->pid) {
+		printk(KERN_WARNING "iforce-main.c: %d tried to erase an effect belonging to %d\n", current->pid, iforce->core_effects[effect_id].owner);
+		return -EACCES;
+	}
+
+	if (effect_id < 0 || effect_id >= FF_EFFECTS_MAX)
+		return -EINVAL;
+
+	core_effect = iforce->core_effects + effect_id;
+
+	if (test_bit(FF_MOD1_IS_USED, core_effect->flags))
+		err = release_resource(&(iforce->core_effects[effect_id].mod1_chunk));
+
+	if (!err && test_bit(FF_MOD2_IS_USED, core_effect->flags))
+		err = release_resource(&(iforce->core_effects[effect_id].mod2_chunk));
+
+	/*TODO: remember to change that if more FF_MOD* bits are added */
+	core_effect->flags[0] = 0;
+
+	return err;
+}
+
+static int iforce_open(struct input_dev *dev)
+{
+	struct iforce *iforce = dev->private;
+
+	switch (iforce->bus) {
+#ifdef IFORCE_USB
+		case IFORCE_USB:
+			iforce->irq->dev = iforce->usbdev;
+			if (usb_submit_urb(iforce->irq, GFP_KERNEL))
+				return -EIO;
+			break;
+#endif
+	}
+
+	/* Enable force feedback */
+	iforce_send_packet(iforce, FF_CMD_ENABLE, "\004");
+
+	return 0;
+}
+
+static int iforce_flush(struct input_dev *dev, struct file *file)
+{
+	struct iforce *iforce = dev->private;
+	int i;
+
+	/* Erase all effects this process owns */
+	for (i=0; i<dev->ff_effects_max; ++i) {
+
+		if (test_bit(FF_CORE_IS_USED, iforce->core_effects[i].flags) &&
+			current->pid == iforce->core_effects[i].owner) {
+			
+			/* Stop effect */
+			input_report_ff(dev, i, 0);
+
+			/* Free ressources assigned to effect */
+			if (iforce_erase_effect(dev, i)) {
+				printk(KERN_WARNING "iforce_flush: erase effect %d failed\n", i);
+			}
+		}
+
+	}
+	return 0;
+}
+
+static void iforce_release(struct input_dev *dev)
+{
+	struct iforce *iforce = dev->private;
+	int i;
+
+	/* Check: no effect should be present in memory */
+	for (i=0; i<dev->ff_effects_max; ++i) {
+		if (test_bit(FF_CORE_IS_USED, iforce->core_effects[i].flags))
+			break;
+	}
+	if (i<dev->ff_effects_max) {
+		printk(KERN_WARNING "iforce_release: Device still owns effects\n");
+	}
+
+	/* Disable force feedback playback */
+	iforce_send_packet(iforce, FF_CMD_ENABLE, "\001");
+
+	switch (iforce->bus) {
+#ifdef IFORCE_USB
+		case IFORCE_USB:
+			usb_unlink_urb(iforce->irq);
+
+			/* The device was unplugged before the file
+			 * was released */
+			if (iforce->usbdev == NULL) {
+				iforce_delete_device(iforce);
+				kfree(iforce);
+			}
+		break;
+#endif
+	}
+}
+
+void iforce_delete_device(struct iforce *iforce)
+{
+	switch (iforce->bus) {
+#ifdef IFORCE_USB
+	case IFORCE_USB:
+		iforce_usb_delete(iforce);
+		break;
+#endif
+#ifdef IFORCE_232
+	case IFORCE_232:
+		//TODO: Wait for the last packets to be sent
+		break;
+#endif
+	}
+}
+
+int iforce_init_device(struct iforce *iforce)
+{
+	unsigned char c[] = "CEOV";
+	int i;
+
+	init_waitqueue_head(&iforce->wait);
+	spin_lock_init(&iforce->xmit_lock);
+	init_MUTEX(&iforce->mem_mutex);
+	iforce->xmit.buf = iforce->xmit_data;
+
+	iforce->dev.ff_effects_max = 10;
+
+/*
+ * Input device fields.
+ */
+
+	iforce->dev.idbus = BUS_USB;
+	iforce->dev.private = iforce;
+	iforce->dev.name = "Unknown I-Force device";
+	iforce->dev.open = iforce_open;
+	iforce->dev.close = iforce_release;
+	iforce->dev.flush = iforce_flush;
+	iforce->dev.event = iforce_input_event;
+	iforce->dev.upload_effect = iforce_upload_effect;
+	iforce->dev.erase_effect = iforce_erase_effect;
+
+/*
+ * On-device memory allocation.
+ */
+
+	iforce->device_memory.name = "I-Force device effect memory";
+	iforce->device_memory.start = 0;
+	iforce->device_memory.end = 200;
+	iforce->device_memory.flags = IORESOURCE_MEM;
+	iforce->device_memory.parent = NULL;
+	iforce->device_memory.child = NULL;
+	iforce->device_memory.sibling = NULL;
+
+/*
+ * Wait until device ready - until it sends its first response.
+ */
+
+	for (i = 0; i < 20; i++)
+		if (!iforce_get_id_packet(iforce, "O"))
+			break;
+
+	if (i == 20) { /* 5 seconds */
+		printk(KERN_ERR "iforce-main.c: Timeout waiting for response from device.\n");
+		return -1;
+	}
+
+/*
+ * Get device info.
+ */
+
+	if (!iforce_get_id_packet(iforce, "M"))
+		iforce->dev.idvendor = (iforce->edata[2] << 8) | iforce->edata[1];
+	else
+		printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet M\n");
+
+	if (!iforce_get_id_packet(iforce, "P"))
+		iforce->dev.idproduct = (iforce->edata[2] << 8) | iforce->edata[1];
+	else
+		printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet P\n");
+
+	if (!iforce_get_id_packet(iforce, "B"))
+		iforce->device_memory.end = (iforce->edata[2] << 8) | iforce->edata[1];
+	else
+		printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet B\n");
+
+	if (!iforce_get_id_packet(iforce, "N"))
+		iforce->dev.ff_effects_max = iforce->edata[1];
+	else
+		printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet N\n");
+
+	/* Check if the device can store more effects than the driver can really handle */
+	if (iforce->dev.ff_effects_max > FF_EFFECTS_MAX) {
+		printk(KERN_WARNING "input??: Device can handle %d effects, but N_EFFECTS_MAX is set to %d in iforce.h\n",
+			iforce->dev.ff_effects_max, FF_EFFECTS_MAX);
+		iforce->dev.ff_effects_max = FF_EFFECTS_MAX;
+	}
+
+/*
+ * Display additional info.
+ */
+
+	for (i = 0; c[i]; i++)
+		if (!iforce_get_id_packet(iforce, c + i))
+			iforce_dump_packet("info", iforce->ecmd, iforce->edata);
+
+/*
+ * Disable spring, enable force feedback.
+ * FIXME: We should use iforce_set_autocenter() et al here.
+ */
+
+	iforce_send_packet(iforce, FF_CMD_AUTOCENTER, "\004\000");
+
+/*
+ * Find appropriate device entry
+ */
+
+	for (i = 0; iforce_device[i].idvendor; i++)
+		if (iforce_device[i].idvendor == iforce->dev.idvendor &&
+		    iforce_device[i].idproduct == iforce->dev.idproduct)
+			break;
+
+	iforce->type = iforce_device + i;
+	iforce->dev.name = iforce->type->name;
+
+/*
+ * Set input device bitfields and ranges.
+ */
+
+	iforce->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_FF) | BIT(EV_FF_STATUS);
+
+	for (i = 0; iforce->type->btn[i] >= 0; i++) {
+		signed short t = iforce->type->btn[i];
+		set_bit(t, iforce->dev.keybit);
+	}
+	set_bit(BTN_DEAD, iforce->dev.keybit);
+
+	for (i = 0; iforce->type->abs[i] >= 0; i++) {
+
+		signed short t = iforce->type->abs[i];
+		set_bit(t, iforce->dev.absbit);
+
+		switch (t) {
+
+			case ABS_X:
+			case ABS_Y:
+			case ABS_WHEEL:
+
+				iforce->dev.absmax[t] =  1920;
+				iforce->dev.absmin[t] = -1920;
+				iforce->dev.absflat[t] = 128;
+				iforce->dev.absfuzz[t] = 16;
+
+				set_bit(t, iforce->dev.ffbit);
+				break;
+
+			case ABS_THROTTLE:
+			case ABS_GAS:
+			case ABS_BRAKE:
+
+				iforce->dev.absmax[t] = 255;
+				iforce->dev.absmin[t] = 0;
+				break;
+
+			case ABS_RUDDER:
+
+				iforce->dev.absmax[t] = 127;
+				iforce->dev.absmin[t] = -128;
+				break;
+
+			case ABS_HAT0X:
+			case ABS_HAT0Y:
+		        case ABS_HAT1X:
+		        case ABS_HAT1Y:
+				iforce->dev.absmax[t] =  1;
+				iforce->dev.absmin[t] = -1;
+				break;
+		}
+	}
+
+	for (i = 0; iforce->type->ff[i] >= 0; i++)
+		set_bit(iforce->type->ff[i], iforce->dev.ffbit);
+
+/*
+ * Register input device.
+ */
+
+	input_register_device(&iforce->dev);
+
+	printk(KERN_DEBUG "iforce->dev.open = %p\n", iforce->dev.open);
+
+	printk(KERN_INFO "input: %s [%d effects, %ld bytes memory]\n",
+		iforce->dev.name, iforce->dev.ff_effects_max,
+		iforce->device_memory.end);
+
+	return 0;
+}
+
+static int __init iforce_init(void)
+{
+#ifdef IFORCE_USB
+	usb_register(&iforce_usb_driver);
+#endif
+#ifdef IFORCE_232
+	serio_register_device(&iforce_serio_dev);
+#endif
+	return 0;
+}
+
+static void __exit iforce_exit(void)
+{
+#ifdef IFORCE_USB
+	usb_deregister(&iforce_usb_driver);
+#endif
+#ifdef IFORCE_232
+	serio_unregister_device(&iforce_serio_dev);
+#endif
+}
+
+module_init(iforce_init);
+module_exit(iforce_exit);

drivers/input/joystick/iforce/iforce-packets.c

+/*
+ * $Id: iforce-packets.c,v 1.15 2002/06/09 11:08:04 jdeneux Exp $
+ *
+ *  Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz>
+ *  Copyright (c) 2001-2002 Johann Deneux <deneux@ifrance.com>
+ *
+ *  USB/RS232 I-Force joysticks and wheels.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include "iforce.h"
+
+static struct {
+	__s32 x;
+	__s32 y;
+} iforce_hat_to_axis[16] = {{ 0,-1}, { 1,-1}, { 1, 0}, { 1, 1}, { 0, 1}, {-1, 1}, {-1, 0}, {-1,-1}};
+
+
+void iforce_dump_packet(char *msg, u16 cmd, unsigned char *data)
+{
+	int i;
+
+	printk(KERN_DEBUG "iforce.c: %s ( cmd = %04x, data = ", msg, cmd);
+	for (i = 0; i < LO(cmd); i++)
+		printk("%02x ", data[i]);
+	printk(")\n");
+}
+
+/*
+ * Send a packet of bytes to the device
+ */
+int iforce_send_packet(struct iforce *iforce, u16 cmd, unsigned char* data)
+{
+	/* Copy data to buffer */
+	int n = LO(cmd);
+	int c;
+	int empty;
+	int head, tail;
+	unsigned long flags;
+			
+/*
+ * Update head and tail of xmit buffer
+ */
+	spin_lock_irqsave(&iforce->xmit_lock, flags);
+
+	head = iforce->xmit.head;
+	tail = iforce->xmit.tail;
+
+	if (CIRC_SPACE(head, tail, XMIT_SIZE) < n+2) {
+		printk(KERN_WARNING "iforce.c: not enough space in xmit buffer to send new packet\n");
+		spin_unlock_irqrestore(&iforce->xmit_lock, flags);
+		return -1;
+	}
+
+	empty = head == tail;
+	XMIT_INC(iforce->xmit.head, n+2);
+
+/*
+ * Store packet in xmit buffer
+ */
+	iforce->xmit.buf[head] = HI(cmd);
+	XMIT_INC(head, 1);
+	iforce->xmit.buf[head] = LO(cmd);
+	XMIT_INC(head, 1);
+
+	c = CIRC_SPACE_TO_END(head, tail, XMIT_SIZE);
+	if (n < c) c=n;
+
+	memcpy(&iforce->xmit.buf[head],
+	       data,
+	       c);
+	if (n != c) {
+		memcpy(&iforce->xmit.buf[0],
+		       data + c,
+		       n - c);
+	}
+	XMIT_INC(head, n);
+
+	spin_unlock_irqrestore(&iforce->xmit_lock, flags);
+/*
+ * If necessary, start the transmission
+ */
+	switch (iforce->bus) {
+
+#ifdef IFORCE_232
+		case IFORCE_232:
+		if (empty)
+			iforce_serial_xmit(iforce);
+		break;
+#endif
+#ifdef IFORCE_USB
+		case IFORCE_USB: 
+
+		if (iforce->usbdev && empty &&
+			!test_and_set_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags)) {
+
+			iforce_usb_xmit(iforce);
+		}
+		break;
+#endif
+	}
+	return 0;
+}
+
+/* Start or stop an effect */
+int iforce_control_playback(struct iforce* iforce, u16 id, unsigned int value)
+{
+	unsigned char data[3];
+
+printk(KERN_DEBUG "iforce-packets.c: control_playback %d %d\n", id, value);
+
+	data[0] = LO(id);
+	data[1] = (value > 0) ? ((value > 1) ? 0x41 : 0x01) : 0;
+	data[2] = LO(value);
+	return iforce_send_packet(iforce, FF_CMD_PLAY, data);
+}
+
+/* Mark an effect that was being updated as ready. That means it can be updated
+ * again */
+static int mark_core_as_ready(struct iforce *iforce, unsigned short addr)
+{
+	int i;
+	for (i=0; i<iforce->dev.ff_effects_max; ++i) {
+		if (test_bit(FF_CORE_IS_USED, iforce->core_effects[i].flags) &&
+		    (iforce->core_effects[i].mod1_chunk.start == addr ||
+		     iforce->core_effects[i].mod2_chunk.start == addr)) {
+			clear_bit(FF_CORE_UPDATE, iforce->core_effects[i].flags);
+			return 0;
+		}
+	}
+	printk(KERN_WARNING "iforce-packets.c: unused effect %04x updated !!!\n", addr);
+	return -1;
+}
+
+void iforce_process_packet(struct iforce *iforce, u16 cmd, unsigned char *data)
+{
+	struct input_dev *dev = &iforce->dev;
+	int i;
+	static int being_used = 0;
+
+	if (being_used)
+		printk(KERN_WARNING "iforce-packets.c: re-entrant call to iforce_process %d\n", being_used);
+	being_used++;
+
+#ifdef IFORCE_232
+	if (HI(iforce->expect_packet) == HI(cmd)) {
+		iforce->expect_packet = 0;
+		iforce->ecmd = cmd;
+		memcpy(iforce->edata, data, IFORCE_MAX_LENGTH);
+		if (waitqueue_active(&iforce->wait))
+			wake_up(&iforce->wait);
+	}
+#endif
+
+	if (!iforce->type) {
+		being_used--;
+		return;
+	}
+
+	switch (HI(cmd)) {
+
+		case 0x01:	/* joystick position data */
+		case 0x03:	/* wheel position data */
+
+			if (HI(cmd) == 1) {
+				input_report_abs(dev, ABS_X, (__s16) (((__s16)data[1] << 8) | data[0]));
+				input_report_abs(dev, ABS_Y, (__s16) (((__s16)data[3] << 8) | data[2]));
+				input_report_abs(dev, ABS_THROTTLE, 255 - data[4]);
+				if (LO(cmd) >= 8 && test_bit(ABS_RUDDER ,dev->absbit))
+					input_report_abs(dev, ABS_RUDDER, (__s8)data[7]);
+			} else {
+				input_report_abs(dev, ABS_WHEEL, (__s16) (((__s16)data[1] << 8) | data[0]));
+				input_report_abs(dev, ABS_GAS,   255 - data[2]);
+				input_report_abs(dev, ABS_BRAKE, 255 - data[3]);
+			}
+
+			input_report_abs(dev, ABS_HAT0X, iforce_hat_to_axis[data[6] >> 4].x);
+			input_report_abs(dev, ABS_HAT0Y, iforce_hat_to_axis[data[6] >> 4].y);
+
+			for (i = 0; iforce->type->btn[i] >= 0; i++)
+				input_report_key(dev, iforce->type->btn[i], data[(i >> 3) + 5] & (1 << (i & 7)));
+
+			/* If there are untouched bits left, interpret them as the second hat */
+			if (i <= 8) {
+				int btns = data[6];
+				if (test_bit(ABS_HAT1X, dev->absbit)) {
+					if (btns & 8) input_report_abs(dev, ABS_HAT1X, -1);
+					else if (btns & 2) input_report_abs(dev, ABS_HAT1X, 1);
+					else input_report_abs(dev, ABS_HAT1X, 0);
+				}
+				if (test_bit(ABS_HAT1Y, dev->absbit)) {
+					if (btns & 1) input_report_abs(dev, ABS_HAT1Y, -1);
+					else if (btns & 4) input_report_abs(dev, ABS_HAT1Y, 1);
+					else input_report_abs(dev, ABS_HAT1Y, 0);
+				}
+			}
+
+			break;
+
+		case 0x02:	/* status report */
+			input_report_key(dev, BTN_DEAD, data[0] & 0x02);
+
+			/* Check if an effect was just started or stopped */
+			i = data[1] & 0x7f;
+			if (data[1] & 0x80) {
+				if (!test_and_set_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) {
+				/* Report play event */
+				input_report_ff_status(dev, i, FF_STATUS_PLAYING);
+				}
+			}
+			else if (test_and_clear_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) {
+				/* Report stop event */
+				input_report_ff_status(dev, i, FF_STATUS_STOPPED);
+			}
+			if (LO(cmd) > 3) {
+				int j;
+				for (j=3; j<LO(cmd); j+=2) {
+					mark_core_as_ready(iforce, data[j] | (data[j+1]<<8));
+				}
+			}
+			break;
+	}
+	being_used--;
+}
+
+int iforce_get_id_packet(struct iforce *iforce, char *packet)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	int timeout = HZ; /* 1 second */
+
+	switch (iforce->bus) {
+
+	case IFORCE_USB:
+
+#ifdef IFORCE_USB
+		iforce->cr.bRequest = packet[0];
+		iforce->ctrl->dev = iforce->usbdev;
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		add_wait_queue(&iforce->wait, &wait);
+
+		if (usb_submit_urb(iforce->ctrl, GFP_KERNEL)) {
+			set_current_state(TASK_RUNNING);
+			remove_wait_queue(&iforce->wait, &wait);
+			return -1;
+		}
+
+		while (timeout && iforce->ctrl->status == -EINPROGRESS)
+			timeout = schedule_timeout(timeout);
+
+		set_current_state(TASK_RUNNING);
+		remove_wait_queue(&iforce->wait, &wait);
+
+		if (!timeout) {
+			usb_unlink_urb(iforce->ctrl);
+			return -1;
+		}
+#else
+		printk(KERN_ERR "iforce_get_id_packet: iforce->bus = USB!\n");
+#endif
+		break;
+
+	case IFORCE_232:
+
+#ifdef IFORCE_232
+		iforce->expect_packet = FF_CMD_QUERY;
+		iforce_send_packet(iforce, FF_CMD_QUERY, packet);
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		add_wait_queue(&iforce->wait, &wait);
+
+		while (timeout && iforce->expect_packet)
+			timeout = schedule_timeout(timeout);
+
+		set_current_state(TASK_RUNNING);
+		remove_wait_queue(&iforce->wait, &wait);
+
+		if (!timeout) {
+			iforce->expect_packet = 0;
+			return -1;
+		}
+#else
+		printk(KERN_ERR "iforce_get_id_packet: iforce->bus = SERIO!\n");
+#endif
+		break;
+
+	default:
+		printk(KERN_ERR "iforce_get_id_packet: iforce->bus = %d\n",
+		       iforce->bus);
+		break;
+	}
+
+	return -(iforce->edata[0] != packet[0]);
+}
+

drivers/input/joystick/iforce/iforce-serio.c

+/*
+ * $Id: iforce-serio.c,v 1.4 2002/01/28 22:45:00 jdeneux Exp $
+ *
+ *  Copyright (c) 2000-2001 Vojtech Pavlik <vojtech@ucw.cz>
+ *  Copyright (c) 2001 Johann Deneux <deneux@ifrance.com>
+ *
+ *  USB/RS232 I-Force joysticks and wheels.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include "iforce.h"
+
+void iforce_serial_xmit(struct iforce *iforce)
+{
+	unsigned char cs;
+	int i;
+	unsigned long flags;
+
+	if (test_and_set_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags)) {
+		set_bit(IFORCE_XMIT_AGAIN, iforce->xmit_flags);
+		return;
+	}
+
+	spin_lock_irqsave(&iforce->xmit_lock, flags);
+
+again:
+	if (iforce->xmit.head == iforce->xmit.tail) {
+		clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags);
+		spin_unlock_irqrestore(&iforce->xmit_lock, flags);
+		return;
+	}
+
+	cs = 0x2b;
+
+	serio_write(iforce->serio, 0x2b);
+
+	serio_write(iforce->serio, iforce->xmit.buf[iforce->xmit.tail]);
+	cs ^= iforce->xmit.buf[iforce->xmit.tail];
+	XMIT_INC(iforce->xmit.tail, 1);
+
+	for (i=iforce->xmit.buf[iforce->xmit.tail]; i >= 0; --i) {
+		serio_write(iforce->serio, iforce->xmit.buf[iforce->xmit.tail]);
+		cs ^= iforce->xmit.buf[iforce->xmit.tail];
+		XMIT_INC(iforce->xmit.tail, 1);
+	}
+	
+	serio_write(iforce->serio, cs);
+
+	if (test_and_clear_bit(IFORCE_XMIT_AGAIN, iforce->xmit_flags))
+		goto again;
+
+	clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags);
+
+	spin_unlock_irqrestore(&iforce->xmit_lock, flags);
+}
+
+static void iforce_serio_write_wakeup(struct serio *serio)
+{
+	iforce_serial_xmit((struct iforce *)serio->private);
+}
+
+static void iforce_serio_irq(struct serio *serio, unsigned char data, unsigned int flags)
+{
+	struct iforce* iforce = serio->private;
+
+	if (!iforce->pkt) {
+		if (data != 0x2b) {
+			return;
+		}
+		iforce->pkt = 1;
+		return;
+	}
+
+	if (!iforce->id) {
+		if (data > 3 && data != 0xff) {
+			iforce->pkt = 0;
+			return;
+		}
+		iforce->id = data;
+		return;
+	}
+
+	if (!iforce->len) {
+		if (data > IFORCE_MAX_LENGTH) {
+			iforce->pkt = 0;
+			iforce->id = 0;
+			return;
+		}
+		iforce->len = data;
+		return;
+	}
+
+	if (iforce->idx < iforce->len) {
+		iforce->csum += iforce->data[iforce->idx++] = data;
+		return;
+	}
+
+	if (iforce->idx == iforce->len) {
+		iforce_process_packet(iforce, (iforce->id << 8) | iforce->idx, iforce->data);
+		iforce->pkt = 0;
+		iforce->id  = 0;
+		iforce->len = 0;
+		iforce->idx = 0;
+		iforce->csum = 0;
+	}
+}
+
+static void iforce_serio_connect(struct serio *serio, struct serio_dev *dev)
+{
+	struct iforce *iforce;
+	if (serio->type != (SERIO_RS232 | SERIO_IFORCE))
+		return;
+
+	if (!(iforce = kmalloc(sizeof(struct iforce), GFP_KERNEL))) return;
+	memset(iforce, 0, sizeof(struct iforce));
+
+	iforce->bus = IFORCE_232;
+	iforce->serio = serio;
+	serio->private = iforce;
+
+	if (serio_open(serio, dev)) {
+		kfree(iforce);
+		return;
+	}
+
+	if (iforce_init_device(iforce)) {
+		serio_close(serio);
+		kfree(iforce);
+		return;
+	}
+}
+
+static void iforce_serio_disconnect(struct serio *serio)
+{
+	struct iforce* iforce = serio->private;
+
+	input_unregister_device(&iforce->dev);
+	serio_close(serio);
+	kfree(iforce);
+}
+
+struct serio_dev iforce_serio_dev = {
+	write_wakeup:	iforce_serio_write_wakeup,
+	interrupt:	iforce_serio_irq,
+	connect:	iforce_serio_connect,
+	disconnect:	iforce_serio_disconnect,
+};

drivers/input/joystick/iforce/iforce-usb.c

+ /*
+ * $Id: iforce-usb.c,v 1.16 2002/06/09 11:08:04 jdeneux Exp $
+ *
+ *  Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz>
+ *  Copyright (c) 2001-2002 Johann Deneux <deneux@ifrance.com>
+ *
+ *  USB/RS232 I-Force joysticks and wheels.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include "iforce.h"
+
+void iforce_usb_xmit(struct iforce *iforce)
+{
+	int n, c;
+	unsigned long flags;
+
+	spin_lock_irqsave(&iforce->xmit_lock, flags);
+
+	if (iforce->xmit.head == iforce->xmit.tail) {
+		clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags);
+		spin_unlock_irqrestore(&iforce->xmit_lock, flags);
+		return;
+	}
+
+	((char *)iforce->out->transfer_buffer)[0] = iforce->xmit.buf[iforce->xmit.tail];
+	XMIT_INC(iforce->xmit.tail, 1);
+	n = iforce->xmit.buf[iforce->xmit.tail];
+	XMIT_INC(iforce->xmit.tail, 1);
+
+	iforce->out->transfer_buffer_length = n + 1;
+	iforce->out->dev = iforce->usbdev;
+
+	/* Copy rest of data then */
+	c = CIRC_CNT_TO_END(iforce->xmit.head, iforce->xmit.tail, XMIT_SIZE);
+	if (n < c) c=n;
+
+	memcpy(iforce->out->transfer_buffer + 1,
+	       &iforce->xmit.buf[iforce->xmit.tail],
+	       c);
+	if (n != c) {
+		memcpy(iforce->out->transfer_buffer + 1 + c,
+		       &iforce->xmit.buf[0],
+		       n-c);
+	}
+	XMIT_INC(iforce->xmit.tail, n);
+
+	if ( (n=usb_submit_urb(iforce->out, GFP_ATOMIC)) ) {
+		printk(KERN_WARNING "iforce-usb.c: iforce_usb_xmit: usb_submit_urb failed %d\n", n);
+	}
+
+	/* The IFORCE_XMIT_RUNNING bit is not cleared here. That's intended.
+	 * As long as the urb completion handler is not called, the transmiting
+	 * is considered to be running */
+	spin_unlock_irqrestore(&iforce->xmit_lock, flags);
+}
+
+static void iforce_usb_irq(struct urb *urb)
+{
+	struct iforce *iforce = urb->context;
+	if (urb->status) return;
+	iforce_process_packet(iforce,
+		(iforce->data[0] << 8) | (urb->actual_length - 1), iforce->data + 1);
+}
+
+static void iforce_usb_out(struct urb *urb)
+{
+	struct iforce *iforce = urb->context;
+
+	if (urb->status) {
+		printk(KERN_DEBUG "iforce_usb_out: urb->status %d, exiting", urb->status);
+		return;
+	}
+
+	iforce_usb_xmit(iforce);
+
+	if (waitqueue_active(&iforce->wait))
+		wake_up(&iforce->wait);
+}
+
+static void iforce_usb_ctrl(struct urb *urb)
+{
+	struct iforce *iforce = urb->context;
+	if (urb->status) return;
+	iforce->ecmd = 0xff00 | urb->actual_length;
+	if (waitqueue_active(&iforce->wait))
+		wake_up(&iforce->wait);
+}
+
+static void *iforce_usb_probe(struct usb_device *dev, unsigned int ifnum,
+				const struct usb_device_id *id)
+{
+	struct usb_endpoint_descriptor *epirq, *epout;
+	struct iforce *iforce;
+
+	epirq = dev->config[0].interface[ifnum].altsetting[0].endpoint + 0;
+	epout = dev->config[0].interface[ifnum].altsetting[0].endpoint + 1;
+
+	if (!(iforce = kmalloc(sizeof(struct iforce) + 32, GFP_KERNEL)))
+		goto fail;
+
+	memset(iforce, 0, sizeof(struct iforce));
+
+	if (!(iforce->irq = usb_alloc_urb(0, GFP_KERNEL))) {
+		goto fail;
+	}
+
+	if (!(iforce->out = usb_alloc_urb(0, GFP_KERNEL))) {
+		goto fail;
+	}
+
+	if (!(iforce->ctrl = usb_alloc_urb(0, GFP_KERNEL))) {
+		goto fail;
+	}
+
+	iforce->bus = IFORCE_USB;
+	iforce->usbdev = dev;
+
+	iforce->cr.bRequestType = USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_INTERFACE;
+	iforce->cr.wIndex = 0;
+	iforce->cr.wLength = 16;
+
+	usb_fill_int_urb(iforce->irq, dev, usb_rcvintpipe(dev, epirq->bEndpointAddress),
+			iforce->data, 16, iforce_usb_irq, iforce, epirq->bInterval);
+
+	usb_fill_bulk_urb(iforce->out, dev, usb_sndbulkpipe(dev, epout->bEndpointAddress),
+			iforce + 1, 32, iforce_usb_out, iforce);
+
+	usb_fill_control_urb(iforce->ctrl, dev, usb_rcvctrlpipe(dev, 0),
+			(void*) &iforce->cr, iforce->edata, 16, iforce_usb_ctrl, iforce);
+
+	if (iforce_init_device(iforce)) goto fail;
+
+	return iforce;
+
+fail:
+	if (iforce) {
+		if (iforce->irq) usb_free_urb(iforce->irq);
+		if (iforce->out) usb_free_urb(iforce->out);
+		if (iforce->ctrl) usb_free_urb(iforce->ctrl);
+		kfree(iforce);
+	}
+
+	return NULL;
+}
+
+/* Called by iforce_delete() */
+void iforce_usb_delete(struct iforce* iforce)
+{
+	usb_unlink_urb(iforce->irq);
+/* Is it ok to unlink those ? */
+	usb_unlink_urb(iforce->out);
+	usb_unlink_urb(iforce->ctrl);
+
+	usb_free_urb(iforce->irq);
+	usb_free_urb(iforce->out);
+	usb_free_urb(iforce->ctrl);
+}
+
+static void iforce_usb_disconnect(struct usb_device *dev, void *ptr)
+{
+	struct iforce *iforce = ptr;
+	int open = iforce->dev.handle->open;
+
+	iforce->usbdev = NULL;
+	input_unregister_device(&iforce->dev);
+
+	if (!open) {
+		iforce_delete_device(iforce);
+		kfree(iforce);
+	}
+}
+
+static struct usb_device_id iforce_usb_ids [] = {
+	{ USB_DEVICE(0x044f, 0xa01c) },		/* Thrustmaster Motor Sport GT */
+	{ USB_DEVICE(0x046d, 0xc281) },		/* Logitech WingMan Force */
+	{ USB_DEVICE(0x046d, 0xc291) },		/* Logitech WingMan Formula Force */
+	{ USB_DEVICE(0x05ef, 0x020a) },		/* AVB Top Shot Pegasus */
+	{ USB_DEVICE(0x05ef, 0x8884) },		/* AVB Mag Turbo Force */
+	{ USB_DEVICE(0x05ef, 0x8888) },		/* AVB Top Shot FFB Racing Wheel */
+	{ USB_DEVICE(0x061c, 0xc0a4) },         /* ACT LABS Force RS */
+	{ USB_DEVICE(0x06f8, 0x0001) },		/* Guillemot Race Leader Force Feedback */
+	{ USB_DEVICE(0x06f8, 0x0004) },		/* Guillemot Force Feedback Racing Wheel */
+	{ }					/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, iforce_usb_ids);
+
+struct usb_driver iforce_usb_driver = {
+	owner:		THIS_MODULE,
+	name:		"iforce",
+	probe:		iforce_usb_probe,
+	disconnect:	iforce_usb_disconnect,
+	id_table:	iforce_usb_ids,
+};

drivers/input/joystick/iforce/iforce.h

+/*
+ * $Id: iforce.h,v 1.12 2002/06/09 11:08:04 jdeneux Exp $
+ *
+ *  Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz>
+ *  Copyright (c) 2001-2002 Johann Deneux <deneux@ifrance.com>
+ *
+ *  USB/RS232 I-Force joysticks and wheels.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/serio.h>
+#include <linux/config.h>
+#include <linux/circ_buf.h>
+#include <asm/semaphore.h>
+
+/* FF: This module provides arbitrary resource management routines.
+ * I use it to manage the device's memory.
+ * Despite the name of this module, I am *not* going to access the ioports.
+ */
+#include <linux/ioport.h>
+
+#define IFORCE_MAX_LENGTH	16
+
+#if defined(CONFIG_JOYSTICK_IFORCE_232)
+#define IFORCE_232	1
+#endif
+#if defined(CONFIG_JOYSTICK_IFORCE_USB)
+#define IFORCE_USB	2
+#endif
+
+#define FALSE 0
+#define TRUE 1
+
+#define FF_EFFECTS_MAX	32
+
+/* Each force feedback effect is made of one core effect, which can be
+ * associated to at most to effect modifiers
+ */
+#define FF_MOD1_IS_USED		0
+#define FF_MOD2_IS_USED		1
+#define FF_CORE_IS_USED		2
+#define FF_CORE_IS_PLAYED	3	/* Effect is currently being played */
+#define FF_CORE_SHOULD_PLAY	4	/* User wants the effect to be played */
+#define FF_CORE_UPDATE		5	/* Effect is being updated */
+#define FF_MODCORE_MAX		5
+
+#define CHECK_OWNERSHIP(i, iforce)	\
+	((i) < FF_EFFECTS_MAX && i >= 0 && \
+	test_bit(FF_CORE_IS_USED, (iforce)->core_effects[(i)].flags) && \
+	(current->pid == 0 || \
+	(iforce)->core_effects[(i)].owner == current->pid))
+
+struct iforce_core_effect {
+	/* Information about where modifiers are stored in the device's memory */
+	struct resource mod1_chunk;
+	struct resource mod2_chunk;
+	unsigned long flags[NBITS(FF_MODCORE_MAX)];
+	pid_t owner;
+	/* Used to keep track of parameters of an effect. They are needed
+	 * to know what parts of an effect changed in an update operation.
+	 * We try to send only parameter packets if possible, as sending
+	 * effect parameter requires the effect to be stoped and restarted
+	 */
+	struct ff_effect effect;
+};
+
+#define FF_CMD_EFFECT		0x010e
+#define FF_CMD_ENVELOPE		0x0208
+#define FF_CMD_MAGNITUDE	0x0303
+#define FF_CMD_PERIOD		0x0407
+#define FF_CMD_CONDITION	0x050a
+
+#define FF_CMD_AUTOCENTER	0x4002
+#define FF_CMD_PLAY		0x4103
+#define FF_CMD_ENABLE		0x4201
+#define FF_CMD_GAIN		0x4301
+
+#define FF_CMD_QUERY		0xff01
+
+/* Buffer for async write */
+#define XMIT_SIZE		256
+#define XMIT_INC(var, n)	(var)+=n; (var)&= XMIT_SIZE -1
+/* iforce::xmit_flags */
+#define IFORCE_XMIT_RUNNING	0
+#define IFORCE_XMIT_AGAIN	1
+
+struct iforce_device {
+	u16 idvendor;
+	u16 idproduct;
+	char *name;
+	signed short *btn;
+	signed short *abs;
+	signed short *ff;
+};
+
+struct iforce {
+	struct input_dev dev;		/* Input device interface */
+	struct iforce_device *type;
+	int bus;
+
+	unsigned char data[IFORCE_MAX_LENGTH];
+	unsigned char edata[IFORCE_MAX_LENGTH];
+	u16 ecmd;
+	u16 expect_packet;
+
+#ifdef IFORCE_232
+	struct serio *serio;		/* RS232 transfer */
+	int idx, pkt, len, id;
+	unsigned char csum;
+#endif
+#ifdef IFORCE_USB
+	struct usb_device *usbdev;	/* USB transfer */
+	struct urb *irq, *out, *ctrl;
+	struct usb_ctrlrequest cr;
+#endif
+	spinlock_t xmit_lock;
+	/* Buffer used for asynchronous sending of bytes to the device */
+	struct circ_buf xmit;
+	unsigned char xmit_data[XMIT_SIZE];
+	long xmit_flags[1];
+	
+					/* Force Feedback */
+	wait_queue_head_t wait;
+	struct resource device_memory;
+	struct iforce_core_effect core_effects[FF_EFFECTS_MAX];
+	struct semaphore mem_mutex;
+};
+
+/* Get hi and low bytes of a 16-bits int */
+#define HI(a)	((unsigned char)((a) >> 8))
+#define LO(a)	((unsigned char)((a) & 0xff))
+
+/* For many parameters, it seems that 0x80 is a special value that should
+ * be avoided. Instead, we replace this value by 0x7f
+ */
+#define HIFIX80(a) ((unsigned char)(((a)<0? (a)+255 : (a))>>8))
+
+/* Encode a time value */
+#define TIME_SCALE(a)	(a)
+
+
+/* Public functions */
+/* iforce-serio.c */
+void iforce_serial_xmit(struct iforce *iforce);
+
+/* iforce-usb.c */
+void iforce_usb_xmit(struct iforce *iforce);
+void iforce_usb_delete(struct iforce *iforce);
+
+/* iforce-main.c */
+int iforce_init_device(struct iforce *iforce);
+void iforce_delete_device(struct iforce *iforce);
+
+/* iforce-packets.c */
+int iforce_control_playback(struct iforce*, u16 id, unsigned int);
+void iforce_process_packet(struct iforce *iforce, u16 cmd, unsigned char *data);
+int iforce_send_packet(struct iforce *iforce, u16 cmd, unsigned char* data);
+void iforce_dump_packet(char *msg, u16 cmd, unsigned char *data) ;
+int iforce_get_id_packet(struct iforce *iforce, char *packet);
+
+/* iforce-ff.c */
+int iforce_upload_periodic(struct iforce*, struct ff_effect*, int is_update);
+int iforce_upload_constant(struct iforce*, struct ff_effect*, int is_update);
+int iforce_upload_condition(struct iforce*, struct ff_effect*, int is_update);
+
+/* Public variables */
+extern struct serio_dev iforce_serio_dev;
+extern struct usb_driver iforce_usb_driver;

drivers/input/joystick/magellan.c

@@ -156,7 +156,7 @@ static void magellan_connect(struct serio *serio, struct serio_dev *dev)
 	magellan->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);	
 
 	for (i = 0; i < 9; i++)
-		set_bit(magellan_buttons[i], &magellan->dev.keybit);
+		set_bit(magellan_buttons[i], magellan->dev.keybit);
 
 	for (i = 0; i < 6; i++) {
 		t = magellan_axes[i];

drivers/input/joystick/twidjoy.c

+/*
+ * $Id: twidjoy.c,v 1.5 2002/01/22 20:31:53 vojtech Exp $
+ *
+ *  derived from CVS-ID "stinger.c,v 1.5 2001/05/29 12:57:18 vojtech Exp"
+ *
+ *  Copyright (c) 2001 Arndt Schoenewald
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ *  Copyright (c) 2000 Mark Fletcher
+ *
+ *  Sponsored by Quelltext AG (http://www.quelltext-ag.de), Dortmund, Germany
+ */
+
+/*
+ * Driver to use Handykey's Twiddler (the first edition, i.e. the one with
+ * the RS232 interface) as a joystick under Linux
+ *
+ * The Twiddler is a one-handed chording keyboard featuring twelve buttons on
+ * the front, six buttons on the top, and a built-in tilt sensor. The buttons
+ * on the front, which are grouped as four rows of three buttons, are pressed
+ * by the four fingers (this implies only one button per row can be held down
+ * at the same time) and the buttons on the top are for the thumb. The tilt
+ * sensor delivers X and Y axis data depending on how the Twiddler is held.
+ * Additional information can be found at http://www.handykey.com.
+ *
+ * This driver does not use the Twiddler for its intended purpose, i.e. as
+ * a chording keyboard, but as a joystick: pressing and releasing a button
+ * immediately sends a corresponding button event, and tilting it generates
+ * corresponding ABS_X and ABS_Y events. This turns the Twiddler into a game
+ * controller with amazing 18 buttons :-)
+ *
+ * Note: The Twiddler2 (the successor of the Twiddler that connects directly
+ * to the PS/2 keyboard and mouse ports) is NOT supported by this driver!
+ *
+ * For questions or feedback regarding this driver module please contact:
+ * Arndt Schoenewald <arndt@quelltext.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+/*
+ * Constants.
+ */
+
+#define TWIDJOY_MAX_LENGTH 5
+
+static char *twidjoy_name = "Handykey Twiddler";
+
+static struct twidjoy_button_spec {
+	int bitshift;
+	int bitmask;
+	int buttons[3];
+}
+twidjoy_buttons[] = {
+	{  0, 3, { BTN_A,      BTN_B,     BTN_C    } },
+	{  2, 3, { BTN_X,      BTN_Y,     BTN_Z    } },
+	{  4, 3, { BTN_TL,     BTN_TR,    BTN_TR2  } },
+	{  6, 3, { BTN_SELECT, BTN_START, BTN_MODE } },
+	{  8, 1, { BTN_BASE5                       } },
+	{  9, 1, { BTN_BASE                        } },
+	{ 10, 1, { BTN_BASE3                       } },
+	{ 11, 1, { BTN_BASE4                       } },
+	{ 12, 1, { BTN_BASE2                       } },
+	{ 13, 1, { BTN_BASE6                       } },
+	{ 0,  0, { 0                               } }
+};
+
+/*
+ * Per-Twiddler data.
+ */
+
+struct twidjoy {
+	struct input_dev dev;
+	int idx;
+	unsigned char data[TWIDJOY_MAX_LENGTH];
+	char phys[32];
+};
+
+/*
+ * twidjoy_process_packet() decodes packets the driver receives from the
+ * Twiddler. It updates the data accordingly.
+ */
+
+static void twidjoy_process_packet(struct twidjoy *twidjoy)
+{
+	if (twidjoy->idx == TWIDJOY_MAX_LENGTH) {
+		struct input_dev *dev = &twidjoy->dev;
+		unsigned char *data = twidjoy->data;
+		struct twidjoy_button_spec *bp;
+		int button_bits, abs_x, abs_y;
+
+		button_bits = ((data[1] & 0x7f) << 7) | (data[0] & 0x7f);
+
+		for (bp = twidjoy_buttons; bp->bitmask; bp++) {
+			int value = (button_bits & (bp->bitmask << bp->bitshift)) >> bp->bitshift;
+			int i;
+
+			for (i = 0; i < bp->bitmask; i++)
+				input_report_key(dev, bp->buttons[i], i+1 == value);
+		}
+
+		abs_x = ((data[4] & 0x07) << 5) | ((data[3] & 0x7C) >> 2);
+		if (data[4] & 0x08) abs_x -= 256;
+
+		abs_y = ((data[3] & 0x01) << 7) | ((data[2] & 0x7F) >> 0);
+		if (data[3] & 0x02) abs_y -= 256;
+
+		input_report_abs(dev, ABS_X, -abs_x);
+		input_report_abs(dev, ABS_Y, +abs_y);
+	}
+
+	return;
+}
+
+/*
+ * twidjoy_interrupt() is called by the low level driver when characters
+ * are ready for us. We then buffer them for further processing, or call the
+ * packet processing routine.
+ */
+
+static void twidjoy_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
+{
+	struct twidjoy *twidjoy = serio->private;
+
+	/* All Twiddler packets are 5 bytes. The fact that the first byte
+	 * has a MSB of 0 and all other bytes have a MSB of 1 can be used
+	 * to check and regain sync. */
+
+	if ((data & 0x80) == 0)
+		twidjoy->idx = 0;	/* this byte starts a new packet */
+	else if (twidjoy->idx == 0)
+		return;			/* wrong MSB -- ignore this byte */
+
+	if (twidjoy->idx < TWIDJOY_MAX_LENGTH)
+		twidjoy->data[twidjoy->idx++] = data;
+
+	if (twidjoy->idx == TWIDJOY_MAX_LENGTH) {
+		twidjoy_process_packet(twidjoy);
+		twidjoy->idx = 0;
+	}
+
+	return;
+}
+
+/*
+ * twidjoy_disconnect() is the opposite of twidjoy_connect()
+ */
+
+static void twidjoy_disconnect(struct serio *serio)
+{
+	struct twidjoy *twidjoy = serio->private;
+	input_unregister_device(&twidjoy->dev);
+	serio_close(serio);
+	kfree(twidjoy);
+}
+
+/*
+ * twidjoy_connect() is the routine that is called when someone adds a
+ * new serio device. It looks for the Twiddler, and if found, registers
+ * it as an input device.
+ */
+
+static void twidjoy_connect(struct serio *serio, struct serio_dev *dev)
+{
+	struct twidjoy_button_spec *bp;
+	struct twidjoy *twidjoy;
+	int i;
+
+	if (serio->type != (SERIO_RS232 | SERIO_TWIDJOY))
+		return;
+
+	if (!(twidjoy = kmalloc(sizeof(struct twidjoy), GFP_KERNEL)))
+		return;
+
+	memset(twidjoy, 0, sizeof(struct twidjoy));
+
+	sprintf(twidjoy->phys, "%s/input0", serio->phys);
+
+	twidjoy->dev.name = twidjoy_name;
+	twidjoy->dev.phys = twidjoy->phys;
+	twidjoy->dev.idbus = BUS_RS232;
+	twidjoy->dev.idvendor = SERIO_TWIDJOY;
+	twidjoy->dev.idproduct = 0x0001;
+	twidjoy->dev.idversion = 0x0100;
+
+	twidjoy->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);	
+
+	for (bp = twidjoy_buttons; bp->bitmask; bp++) {
+		for (i = 0; i < bp->bitmask; i++)
+			set_bit(bp->buttons[i], twidjoy->dev.keybit);
+	}
+
+	twidjoy->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
+
+	for (i = 0; i < 2; i++) {
+		twidjoy->dev.absmax[ABS_X+i] =  50;	
+		twidjoy->dev.absmin[ABS_X+i] = -50;	
+
+		/* TODO: arndt 20010708: Are these values appropriate? */
+		twidjoy->dev.absfuzz[ABS_X+i] = 4;
+		twidjoy->dev.absflat[ABS_X+i] = 4;
+	}
+
+	twidjoy->dev.private = twidjoy;
+	
+	serio->private = twidjoy;
+
+	if (serio_open(serio, dev)) {
+		kfree(twidjoy);
+		return;
+	}
+
+	input_register_device(&twidjoy->dev);
+
+	printk(KERN_INFO "input: %s on %s\n", twidjoy_name, serio->phys);
+}
+
+/*
+ * The serio device structure.
+ */
+
+static struct serio_dev twidjoy_dev = {
+	interrupt:	twidjoy_interrupt,
+	connect:	twidjoy_connect,
+	disconnect:	twidjoy_disconnect,
+};
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+int __init twidjoy_init(void)
+{
+	serio_register_device(&twidjoy_dev);
+	return 0;
+}
+
+void __exit twidjoy_exit(void)
+{
+	serio_unregister_device(&twidjoy_dev);
+}
+
+module_init(twidjoy_init);
+module_exit(twidjoy_exit);

drivers/input/keybdev.c

 /*
- * $Id: keybdev.c,v 1.16 2002/01/09 04:21:41 lethal Exp $
+ * $Id: keybdev.c,v 1.19 2002/03/13 10:09:20 vojtech Exp $
  *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  *
@@ -179,7 +179,7 @@ void panic_blink(void)
 	static unsigned long last_jiffie;
 	static char led;
 	/* Roughly 1/2s frequency. KDB uses about 1s. Make sure it is different. */
-	if (jiffies - last_jiffie > HZ/2) {
+	if (time_after(jiffies, last_jiffie + HZ/2)) {
 		led ^= 0x01 | 0x04;
 		keybdev_ledfunc(led);
 		last_jiffie = jiffies;

drivers/input/keyboard/Config.help

+CONFIG_INPUT_KEYBOARD
+  Say Y here, and a list of supported keyboards will be displayed.
+  This option doesn't affect the kernel.
+
+  If unsure, say Y.
+
+CONFIG_KEYBOARD_ATKBD
+  Say Y here if you want to use the standard AT keyboard. Usually
+  you'll need this, unless you have a different type keyboard (USB,
+  ADB or other).
+
+  If unsure, say Y.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called atkbd.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_KEYBOARD_SUNKBD
+  Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
+  connected either to the Sun keyboard connector or to an serial
+  (RS-232) port via a simple adapter.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sunkbd.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_KEYBOARD_PS2SERKBD
+  Say Y here if you want to use a PS/2 to Serial converter with a
+  keyboard attached to it.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ps2serkbd.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_KEYBOARD_XTKBD
+  Say Y here if you want to use the old IBM PC/XT keyboard (or
+  compatible) on your system. This is only possible with a
+  parallel port keyboard adapter, you cannot connect it to the
+  keyboard port on a PC that runs Linux. 
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called xtkbd.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_KEYBOARD_MAPLE  
+  Say Y here if you have a DreamCast console running Linux and have
+  a keyboard attached to its Maple bus.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called maple_keyb.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_KEYBOARD_AMIGA
+  Say Y here if you are running Linux on any AMIGA and have a keyboard
+  attached.	
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called amikbd.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+

drivers/input/keyboard/Config.in

+#
+# Input core configuration
+#
+
+bool 'Keyboards' CONFIG_INPUT_KEYBOARD
+
+dep_tristate '  AT keyboard support' CONFIG_KEYBOARD_ATKBD $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_SERIO
+dep_tristate '  Sun Type 4 and Type 5 keyboard support' CONFIG_KEYBOARD_SUNKBD $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_SERIO
+dep_tristate '  PS/2 to Serial converter support' CONFIG_KEYBOARD_PS2SERKBD $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_SERIO
+dep_tristate '  XT Keyboard support' CONFIG_KEYBOARD_XTKBD $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_SERIO
+
+if [ "$CONFIG_SH_DREAMCAST" = "y" ]; then
+   dep_tristate '  Maple bus keyboard support' CONFIG_KEYBOARD_MAPLE $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_MAPLE
+fi
+
+if [ "$CONFIG_AMIGA" = "y" ]; then
+   dep_tristate '  Amiga keyboard' CONFIG_KEYBOARD_AMIGA $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD
+fi

drivers/input/keyboard/Makefile

+#
+# Makefile for the input core drivers.
+#
+
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
+obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
+obj-$(CONFIG_KEYBOARD_PS2SERKBD)	+= ps2serkbd.o
+obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
+obj-$(CONFIG_KEYBOARD_XTKBD)		+= xtkbd.o
+obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
+
+# The global Rules.make.
+
+include $(TOPDIR)/Rules.make

drivers/input/keyboard/amikbd.c

+/*
+ * $Id: amikbd.c,v 1.13 2002/02/01 16:02:24 vojtech Exp $
+ *
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ *
+ *  Based on the work of:
+ *	Hamish Macdonald
+ */
+
+/*
+ * Amiga keyboard driver for Linux/m68k
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+
+#include <asm/amigaints.h>
+#include <asm/amigahw.h>
+#include <asm/irq.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Amiga keyboard driver");
+MODULE_LICENSE("GPL");
+
+static unsigned char amikbd_keycode[0x78] = {
+	 41,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 43,  0, 82,
+	 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,  0, 79, 80, 81,
+	 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40,  0,  0, 75, 76, 77,
+	  0, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53,  0, 83, 71, 72, 73,
+	 57, 14, 15, 96, 28,  1,111,  0,  0,  0, 74,  0,103,108,106,105,
+	 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 98, 55, 78, 87,
+	 42, 54, 58, 29, 56,100
+}
+
+static char *amikbd_messages[] = {
+	KERN_ALERT "amikbd: Ctrl-Amiga-Amiga reset warning!!\n",
+	KERN_WARNING "amikbd: keyboard lost sync\n",
+	KERN_WARNING "amikbd: keyboard buffer overflow\n",
+	KERN_WARNING "amikbd: keyboard controller failure\n",
+	KERN_ERR "amikbd: keyboard selftest failure\n",
+	KERN_INFO "amikbd: initiate power-up key stream\n",
+	KERN_INFO "amikbd: terminate power-up key stream\n",
+	KERN_WARNING "amikbd: keyboard interrupt\n"
+};
+
+static struct input_dev amikbd_dev;
+
+static char *amikbd_name = "Amiga keyboard";
+static char *amikbd_phys = "amikbd/input0";
+
+static void amikbd_interrupt(int irq, void *dummy, struct pt_regs *fp)
+{
+	unsigned char scancode, down;
+
+	scancode = ~ciaa.sdr;		/* get and invert scancode (keyboard is active low) */
+	ciaa.cra |= 0x40;		/* switch SP pin to output for handshake */
+	udelay(85);			/* wait until 85 us have expired */
+	ciaa.cra &= ~0x40;		/* switch CIA serial port to input mode */
+
+	down = scancode & 1;		/* lowest bit is release bit */
+	scancode = scancode >> 1;
+
+	if (scancode < 0x78) {		/* scancodes < 0x78 are keys */
+
+		scancode = amikbd_keycode[scancode];
+	
+		if (scancode == KEY_CAPS) {	/* CapsLock is a toggle switch key on Amiga */
+			input_report_key(&amikbd_dev, scancode, 1);
+			input_report_key(&amikbd_dev, scancode, 0);
+			return;
+		}
+		
+		input_report_key(&amikbd_dev, scancode, down);
+
+		return;
+	}
+
+	printk(amikbd_messages[scancode - 0x78]);	/* scancodes >= 0x78 are error codes */
+}
+
+static int __init amikbd_init(void)
+{
+	int i;
+
+	if (!AMIGAHW_PRESENT(AMI_KEYBOARD))
+	 	return -EIO;
+
+	if (!request_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100, "amikeyb"))   
+		return -EBUSY;
+
+	amikbd_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);	
+	amikbd_dev.keycode = amikbd_keycode;
+	
+ 	for (i = 0; i < 0x78; i++)
+		if (amikbd_keycode[i])
+			set_bit(amikbd_keycode[i], amikbd_dev.keybit);
+
+	ciaa.cra &= ~0x41;	 /* serial data in, turn off TA */
+	request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd", NULL);
+
+	amikbd_dev.name = amikbd_name;
+	amikbd_dev.phys = amikbd_phys;
+	amikbd_dev.idbus = BUS_AMIGA;
+	amikbd_dev.idvendor = 0x0001;
+	amikbd_dev.idproduct = 0x0001;
+	amikbd_dev.idversion = 0x0100;
+
+	input_register_device(&amikbd_dev);
+
+	printk(KERN_INFO "input: %s\n", amikbd_name);
+
+	return 0;
+}
+
+static void __exit amikbd_exit(void)
+{
+	input_unregister_device(&amikbd_dev);
+	free_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt);
+	release_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100);
+}
+
+module_init(amikbd_init);
+module_exit(amikbd_exit);

drivers/input/keyboard/atkbd.c

+/*
+ * $Id: atkbd.c,v 1.33 2002/02/12 09:34:34 vojtech Exp $
+ *
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/tqueue.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("AT and PS/2 keyboard driver");
+MODULE_PARM(atkbd_set, "1i");
+MODULE_LICENSE("GPL");
+
+static int atkbd_set = 2;
+
+/*
+ * Scancode to keycode tables. These are just the default setting, and
+ * are loadable via an userland utility.
+ */
+
+static unsigned char atkbd_set2_keycode[512] = {
+	  0, 67, 65, 63, 61, 59, 60, 88,  0, 68, 66, 64, 62, 15, 41, 85,
+	  0, 56, 42,  0, 29, 16,  2, 89,  0,  0, 44, 31, 30, 17,  3, 90,
+	  0, 46, 45, 32, 18,  5,  4, 91,  0, 57, 47, 33, 20, 19,  6,  0,
+	  0, 49, 48, 35, 34, 21,  7,  0,  0,  0, 50, 36, 22,  8,  9,  0,
+	  0, 51, 37, 23, 24, 11, 10,  0,  0, 52, 53, 38, 39, 25, 12,  0,
+	122, 89, 40,120, 26, 13,  0,  0, 58, 54, 28, 27,  0, 43,  0,  0,
+	 85, 86, 90, 91, 92, 93, 14, 94, 95, 79,  0, 75, 71,121,  0,123,
+	 82, 83, 80, 76, 77, 72,  1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
+	252,  0,  0, 65, 99,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,251,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	252,253,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	254,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,255,
+	  0,  0, 92, 90, 85,  0,137,  0,  0,  0,  0, 91, 89,144,115,  0,
+	136,100,255,  0, 97,149,164,  0,156,  0,  0,140,115,  0,  0,125,
+	  0,150,  0,154,152,163,151,126,112,166,  0,140,  0,147,  0,127,
+	159,167,139,160,163,  0,  0,116,158,  0,150,165,  0,  0,  0,142,
+	157,  0,114,166,168,  0,  0,  0,155,  0, 98,113,  0,148,  0,138,
+	  0,  0,  0,  0,  0,  0,153,140,  0,255, 96,  0,  0,  0,143,  0,
+	133,  0,116,  0,143,  0,174,133,  0,107,  0,105,102,  0,  0,112,
+	110,111,108,112,106,103,  0,119,  0,118,109,  0, 99,104,119
+};
+
+static unsigned char atkbd_set3_keycode[512] = {
+	  0,  0,  0,  0,  0,  0,  0, 59,  1,138,128,129,130, 15, 41, 60,
+	131, 29, 42, 86, 58, 16,  2, 61,133, 56, 44, 31, 30, 17,  3, 62,
+	134, 46, 45, 32, 18,  5,  4, 63,135, 57, 47, 33, 20, 19,  6, 64,
+	136, 49, 48, 35, 34, 21,  7, 65,137,100, 50, 36, 22,  8,  9, 66,
+	125, 51, 37, 23, 24, 11, 10, 67,126, 52, 53, 38, 39, 25, 12, 68,
+	113,114, 40, 84, 26, 13, 87, 99,100, 54, 28, 27, 43, 84, 88, 70,
+	108,105,119,103,111,107, 14,110,  0, 79,106, 75, 71,109,102,104,
+	 82, 83, 80, 76, 77, 72, 69, 98,  0, 96, 81,  0, 78, 73, 55, 85,
+	 89, 90, 91, 92, 74,  0,  0,  0,  0,  0,  0,125,126,127,112,  0,
+	  0,139,150,163,165,115,152,150,166,140,160,154,113,114,167,168,
+	148,149,147,140,  0,  0,  0,  0,  0,  0,251,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	252,253,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	254,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,255
+};
+
+#define ATKBD_CMD_SETLEDS	0x10ed
+#define ATKBD_CMD_GSCANSET	0x11f0
+#define ATKBD_CMD_SSCANSET	0x10f0
+#define ATKBD_CMD_GETID		0x02f2
+#define ATKBD_CMD_ENABLE	0x00f4
+#define ATKBD_CMD_RESET_DIS	0x00f5
+#define ATKBD_CMD_SETALL_MB	0x00f8
+#define ATKBD_CMD_EX_ENABLE	0x10ea
+#define ATKBD_CMD_EX_SETLEDS	0x20eb
+
+#define ATKBD_RET_ACK		0xfa
+#define ATKBD_RET_NAK		0xfe
+
+#define ATKBD_KEY_UNKNOWN	  0
+#define ATKBD_KEY_BAT		251
+#define ATKBD_KEY_EMUL0		252
+#define ATKBD_KEY_EMUL1		253
+#define ATKBD_KEY_RELEASE	254
+#define ATKBD_KEY_NULL		255
+
+/*
+ * The atkbd control structure
+ */
+
+struct atkbd {
+	unsigned char keycode[512];
+	struct input_dev dev;
+	struct serio *serio;
+	char name[64];
+	char phys[32];
+	struct tq_struct tq;
+	unsigned char cmdbuf[4];
+	unsigned char cmdcnt;
+	unsigned char set;
+	char release;
+	char ack;
+	char emul;
+	char error;
+	unsigned short id;
+};
+
+/*
+ * atkbd_interrupt(). Here takes place processing of data received from
+ * the keyboard into events.
+ */
+
+static void atkbd_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
+{
+	struct atkbd *atkbd = serio->private;
+	int code = data;
+
+#ifdef ATKBD_DEBUG
+	printk(KERN_DEBUG "atkbd.c: Received %02x\n", data);
+#endif
+
+	switch (code) {
+		case ATKBD_RET_ACK:
+			atkbd->ack = 1;
+			return;
+		case ATKBD_RET_NAK:
+			atkbd->ack = -1;
+			return;
+	}
+
+	if (atkbd->cmdcnt) {
+		atkbd->cmdbuf[--atkbd->cmdcnt] = code;
+		return;
+	}
+
+	switch (atkbd->keycode[code]) {
+		case ATKBD_KEY_BAT:
+			queue_task(&atkbd->tq, &tq_immediate);
+			mark_bh(IMMEDIATE_BH);
+			return;
+		case ATKBD_KEY_EMUL0:
+			atkbd->emul = 1;
+			return;
+		case ATKBD_KEY_EMUL1:
+			atkbd->emul = 2;
+			return;
+		case ATKBD_KEY_RELEASE:
+			atkbd->release = 1;
+			return;
+	}
+
+	if (atkbd->emul) {
+		if (--atkbd->emul) return;
+		code |= 0x100;
+	}
+
+	switch (atkbd->keycode[code]) {
+		case ATKBD_KEY_NULL:
+			break;
+		case ATKBD_KEY_UNKNOWN:
+			printk(KERN_WARNING "atkbd.c: Unknown key (set %d, scancode %#x, on %s) %s.\n",
+				atkbd->set, code, serio->phys, atkbd->release ? "released" : "pressed");
+			break;
+		default:
+			input_report_key(&atkbd->dev, atkbd->keycode[code], !atkbd->release);
+	}
+		
+	atkbd->release = 0;
+}
+
+/*
+ * atkbd_sendbyte() sends a byte to the keyboard, and waits for
+ * acknowledge. It doesn't handle resends according to the keyboard
+ * protocol specs, because if these are needed, the keyboard needs
+ * replacement anyway, and they only make a mess in the protocol.
+ */
+
+static int atkbd_sendbyte(struct atkbd *atkbd, unsigned char byte)
+{
+	int timeout = 10000; /* 100 msec */
+	atkbd->ack = 0;
+
+#ifdef ATKBD_DEBUG
+	printk(KERN_DEBUG "atkbd.c: Sent: %02x\n", byte);
+#endif
+	serio_write(atkbd->serio, byte);
+	while (!atkbd->ack && timeout--) udelay(10);
+
+	return -(atkbd->ack <= 0);
+}
+
+/*
+ * atkbd_command() sends a command, and its parameters to the keyboard,
+ * then waits for the response and puts it in the param array.
+ */
+
+static int atkbd_command(struct atkbd *atkbd, unsigned char *param, int command)
+{
+	int timeout = 50000; /* 500 msec */
+	int send = (command >> 12) & 0xf;
+	int receive = (command >> 8) & 0xf;
+	int i;
+
+	atkbd->cmdcnt = receive;
+	
+	if (command & 0xff)
+		if (atkbd_sendbyte(atkbd, command & 0xff))
+			return (atkbd->cmdcnt = 0) - 1;
+
+	for (i = 0; i < send; i++)
+		if (atkbd_sendbyte(atkbd, param[i]))
+			return (atkbd->cmdcnt = 0) - 1;
+
+	while (atkbd->cmdcnt && timeout--) udelay(10);
+
+	for (i = 0; i < receive; i++)
+		param[i] = atkbd->cmdbuf[(receive - 1) - i];
+
+	if (atkbd->cmdcnt) 
+		return (atkbd->cmdcnt = 0) - 1;
+
+	return 0;
+}
+
+/*
+ * Event callback from the input module. Events that change the state of
+ * the hardware are processed here.
+ */
+
+static int atkbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
+{
+	struct atkbd *atkbd = dev->private;
+	char param[2];
+
+	if (!atkbd->serio->write)
+		return -1;
+
+	switch (type) {
+
+		case EV_LED:
+
+			*param = (test_bit(LED_SCROLLL, dev->led) ? 1 : 0)
+			       | (test_bit(LED_NUML,    dev->led) ? 2 : 0)
+			       | (test_bit(LED_CAPSL,   dev->led) ? 4 : 0);
+		        atkbd_command(atkbd, param, ATKBD_CMD_SETLEDS);
+
+			if (atkbd->set == 4) {
+				param[0] = 0;
+				param[1] = (test_bit(LED_COMPOSE, dev->led) ? 0x01 : 0)
+					 | (test_bit(LED_SLEEP,   dev->led) ? 0x02 : 0)
+					 | (test_bit(LED_SUSPEND, dev->led) ? 0x04 : 0)
+				         | (test_bit(LED_MUTE,    dev->led) ? 0x20 : 0);
+				atkbd_command(atkbd, param, ATKBD_CMD_EX_SETLEDS);
+			}
+
+			return 0;
+	}
+
+	return -1;
+}
+
+/*
+ * atkbd_set_3 checks if a keyboard has a working Set 3 support, and
+ * sets it into that. Unfortunately there are keyboards that can be switched
+ * to Set 3, but don't work well in that (BTC Multimedia ...)
+ */
+
+static int atkbd_set_3(struct atkbd *atkbd)
+{
+	unsigned char param;
+
+/*
+ * For known special keyboards we can go ahead and set the correct set.
+ */
+
+	if (atkbd->id == 0xaca1) {
+		param = 3;
+		atkbd_command(atkbd, &param, ATKBD_CMD_SSCANSET);
+		return 3;
+	}
+
+/*
+ * We check for the extra keys on an some keyboards that need extra
+ * command to get enabled. This shouldn't harm any keyboards not
+ * knowing the command.
+ */
+
+	param = 0x71;
+	if (!atkbd_command(atkbd, &param, ATKBD_CMD_EX_ENABLE))
+		return 4;
+
+/*
+ * Try to set the set we want.
+ */
+
+	param = atkbd_set;
+	if (atkbd_command(atkbd, &param, ATKBD_CMD_SSCANSET))
+		return 2;
+
+/*
+ * Read set number. Beware here. Some keyboards always send '2'
+ * or some other number regardless into what mode they have been
+ * attempted to be set. Other keyboards treat the '0' command as
+ * 'set to set 0', and not 'report current set' as they should.
+ * In that case we time out, and return 2.
+ */
+
+	param = 0;
+	if (atkbd_command(atkbd, &param, ATKBD_CMD_GSCANSET))
+		return 2;
+
+/*
+ * Here we return the set number the keyboard reports about
+ * itself.
+ */
+
+	return (param == 3) ? 3 : 2;
+}
+
+/*
+ * atkbd_probe() probes for an AT keyboard on a serio port.
+ */
+
+static int atkbd_probe(struct atkbd *atkbd)
+{
+	unsigned char param[2];
+
+/*
+ * Full reset with selftest can on some keyboards be annoyingly slow,
+ * so we just do a reset-and-disable on the keyboard, which
+ * is considerably faster, but doesn't have to reset everything.
+ */
+
+	if (atkbd_command(atkbd, NULL, ATKBD_CMD_RESET_DIS))
+		return -1;
+
+/*
+ * Next, we check if it's a keyboard. It should send 0xab83
+ * (0xab84 on IBM ThinkPad, and 0xaca1 on a NCD Sun layout keyboard,
+ * 0xab02 on unxlated i8042 and 0xab03 on unxlated ThinkPad, 0xab7f
+ * on Fujitsu Lifebook).
+ * If it's a mouse, it'll only send 0x00 (0x03 if it's MS mouse),
+ * and we'll time out here, and report an error.
+ */
+
+	param[0] = param[1] = 0;
+
+	if (atkbd_command(atkbd, param, ATKBD_CMD_GETID))
+		return -1;
+
+	atkbd->id = (param[0] << 8) | param[1];
+
+	if (atkbd->id != 0xab83 && atkbd->id != 0xab84 && atkbd->id != 0xaca1 &&
+	    atkbd->id != 0xab7f && atkbd->id != 0xab02 && atkbd->id != 0xab03)
+		printk(KERN_WARNING "atkbd.c: Unusual keyboard ID: %#x on %s\n",
+			atkbd->id, atkbd->serio->phys);
+
+	return 0;
+}
+
+/*
+ * atkbd_initialize() sets the keyboard into a sane state.
+ */
+
+static void atkbd_initialize(struct atkbd *atkbd)
+{
+	unsigned char param;	
+
+/*
+ * Disable autorepeat. We don't need it, as we do it in software anyway,
+ * because that way can get faster repeat, and have less system load
+ * (less accesses to the slow ISA hardware). If this fails, we don't care,
+ * and will just ignore the repeated keys.
+ */
+
+	atkbd_command(atkbd, NULL, ATKBD_CMD_SETALL_MB);
+
+/*
+ * We also shut off all the leds. The console code will turn them back on,
+ * if needed.
+ */
+
+	param = 0;
+	atkbd_command(atkbd, &param, ATKBD_CMD_SETLEDS);
+
+/*
+ * Last, we enable the keyboard so that we get keypresses from it.
+ */
+
+	if (atkbd_command(atkbd, NULL, ATKBD_CMD_ENABLE))
+		printk(KERN_ERR "atkbd.c: Failed to enable keyboard on %s\n",
+			atkbd->serio->phys);
+}
+
+/*
+ * atkbd_disconnect() cleans up behind us ...
+ */
+
+static void atkbd_disconnect(struct serio *serio)
+{
+	struct atkbd *atkbd = serio->private;
+	input_unregister_device(&atkbd->dev);
+	serio_close(serio);
+	kfree(atkbd);
+}
+
+/*
+ * atkbd_powerup() is called when the keyboard sends the 0xaa character,
+ * meaning that it was disconnected and reconnected. We close the port
+ * in that case and let the upper layer find an appropriate driver for
+ * the device that was connected. It may be a mouse, or a keyboard, we
+ * don't know yet.
+ */
+
+static void atkbd_powerup(void *data)
+{
+	struct atkbd *atkbd = data;
+	mdelay(40); /* FIXME!!! Wait some nicer way */
+	serio_rescan(atkbd->serio);
+}
+
+/*
+ * atkbd_connect() is called when the serio module finds and interface
+ * that isn't handled yet by an appropriate device driver. We check if
+ * there is an AT keyboard out there and if yes, we register ourselves
+ * to the input module.
+ */
+
+static void atkbd_connect(struct serio *serio, struct serio_dev *dev)
+{
+	struct atkbd *atkbd;
+	int i;
+
+	if ((serio->type & SERIO_TYPE) != SERIO_8042)
+		return;
+
+	if (!(atkbd = kmalloc(sizeof(struct atkbd), GFP_KERNEL)))
+		return;
+
+	memset(atkbd, 0, sizeof(struct atkbd));
+
+	if (serio->write) {
+		atkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
+		atkbd->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
+	} else  atkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+
+	atkbd->serio = serio;
+
+	atkbd->dev.keycode = atkbd->keycode;
+	atkbd->dev.event = atkbd_event;
+	atkbd->dev.private = atkbd;
+
+	atkbd->tq.routine = atkbd_powerup;
+	atkbd->tq.data = atkbd;
+
+	serio->private = atkbd;
+
+	if (serio_open(serio, dev)) {
+		kfree(atkbd);
+		return;
+	}
+
+	if (serio->write) {
+
+		if (atkbd_probe(atkbd)) {
+			serio_close(serio);
+			kfree(atkbd);
+			return;
+		}
+		
+		atkbd->set = atkbd_set_3(atkbd);
+
+	} else {
+		atkbd->set = 2;
+		atkbd->id = 0xab00;
+	}
+
+	if (atkbd->set == 4) {
+		atkbd->dev.ledbit[0] |= BIT(LED_COMPOSE) | BIT(LED_SUSPEND) | BIT(LED_SLEEP) | BIT(LED_MUTE);
+		sprintf(atkbd->name, "AT Set 2 Extended keyboard\n");
+	} else
+		sprintf(atkbd->name, "AT Set %d keyboard", atkbd->set);
+
+	sprintf(atkbd->phys, "%s/input0", serio->phys);
+
+	if (atkbd->set == 3)
+		memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode));
+	else
+		memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode));
+
+	atkbd->dev.name = atkbd->name;
+	atkbd->dev.phys = atkbd->phys;
+	atkbd->dev.idbus = BUS_I8042;
+	atkbd->dev.idvendor = 0x0001;
+	atkbd->dev.idproduct = atkbd->set;
+	atkbd->dev.idversion = atkbd->id;
+
+	for (i = 0; i < 512; i++)
+		if (atkbd->keycode[i] && atkbd->keycode[i] <= 250)
+			set_bit(atkbd->keycode[i], atkbd->dev.keybit);
+
+	input_register_device(&atkbd->dev);
+
+	printk(KERN_INFO "input: %s on %s\n", atkbd->name, serio->phys);
+
+	if (serio->write)
+		atkbd_initialize(atkbd);
+}
+
+
+static struct serio_dev atkbd_dev = {
+	interrupt:	atkbd_interrupt,
+	connect:	atkbd_connect,
+	disconnect:	atkbd_disconnect
+};
+
+/*
+ * Module init and exit.
+ */
+
+void __init atkbd_setup(char *str, int *ints)
+{
+	if (!ints[0]) atkbd_set = ints[1];
+}
+
+int __init atkbd_init(void)
+{
+	serio_register_device(&atkbd_dev);
+	return 0;
+}
+
+void __exit atkbd_exit(void)
+{
+	serio_unregister_device(&atkbd_dev);
+}
+
+module_init(atkbd_init);
+module_exit(atkbd_exit);

drivers/input/keyboard/maple_keyb.c

+/*
+ *	$Id: maple_keyb.c,v 1.1 2001/11/02 17:27:32 jsimmons Exp $
+ * 	SEGA Dreamcast keyboard driver
+ *	Based on drivers/usb/usbkbd.c
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/maple.h>
+
+MODULE_AUTHOR("YAEGASHI Takeshi <t@keshi.org>");
+MODULE_DESCRIPTION("SEGA Dreamcast keyboard driver");
+
+static unsigned char dc_kbd_keycode[256] = {
+	  0,  0,  0,  0, 30, 48, 46, 32, 18, 33, 34, 35, 23, 36, 37, 38,
+	 50, 49, 24, 25, 16, 19, 31, 20, 22, 47, 17, 45, 21, 44,  2,  3,
+	  4,  5,  6,  7,  8,  9, 10, 11, 28,  1, 14, 15, 57, 12, 13, 26,
+	 27, 43, 84, 39, 40, 41, 51, 52, 53, 58, 59, 60, 61, 62, 63, 64,
+	 65, 66, 67, 68, 87, 88, 99, 70,119,110,102,104,111,107,109,106,
+	105,108,103, 69, 98, 55, 74, 78, 96, 79, 80, 81, 75, 76, 77, 71,
+	 72, 73, 82, 83, 86,127,116,117, 85, 89, 90, 91, 92, 93, 94, 95,
+	120,121,122,123,134,138,130,132,128,129,131,137,133,135,136,113,
+	115,114,  0,  0,  0,124,  0,181,182,183,184,185,186,187,188,189,
+	190,191,192,193,194,195,196,197,198,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	 29, 42, 56,125, 97, 54,100,126,164,166,165,163,161,115,114,113,
+	150,158,159,128,136,177,178,176,142,152,173,140
+};
+
+
+struct dc_kbd {
+	struct input_dev dev;
+	unsigned char new[8];
+	unsigned char old[8];
+	int open;
+};
+
+
+static void dc_scan_kbd(struct dc_kbd *kbd)
+{
+	int i;
+	struct input_dev *dev = &kbd->dev;
+
+	for(i=0; i<8; i++)
+		input_report_key(dev,
+				 dc_kbd_keycode[i+224],
+				 (kbd->new[0]>>i)&1);
+
+	for(i=2; i<8; i++) {
+
+		if(kbd->old[i]>3&&memscan(kbd->new+2, kbd->old[i], 6)==NULL) {
+			if(dc_kbd_keycode[kbd->old[i]])
+				input_report_key(dev,
+						 dc_kbd_keycode[kbd->old[i]],
+						 0);
+			else
+				printk("Unknown key (scancode %#x) released.",
+				       kbd->old[i]);
+		}
+
+		if(kbd->new[i]>3&&memscan(kbd->old+2, kbd->new[i], 6)!=NULL) {
+			if(dc_kbd_keycode[kbd->new[i]])
+				input_report_key(dev,
+						 dc_kbd_keycode[kbd->new[i]],
+						 1);
+			else
+				printk("Unknown key (scancode %#x) pressed.",
+				       kbd->new[i]);
+		}
+	}
+
+	memcpy(kbd->old, kbd->new, 8);
+}
+
+
+static void dc_kbd_callback(struct mapleq *mq)
+{
+	struct maple_device *mapledev = mq->dev;
+	struct dc_kbd *kbd = mapledev->private_data;
+	unsigned long *buf = mq->recvbuf;
+
+	if (buf[1] == mapledev->function) {
+		memcpy(kbd->new, buf+2, 8);
+		dc_scan_kbd(kbd);
+	}
+}
+
+
+static int dc_kbd_open(struct input_dev *dev)
+{
+	struct dc_kbd *kbd = dev->private;
+	kbd->open++;
+	return 0;
+}
+
+
+static void dc_kbd_close(struct input_dev *dev)
+{
+	struct dc_kbd *kbd = dev->private;
+	kbd->open--;
+}
+
+
+static int dc_kbd_connect(struct maple_device *dev)
+{
+	int i;
+	unsigned long data = be32_to_cpu(dev->devinfo.function_data[0]);
+	struct dc_kbd *kbd;
+
+	if (!(kbd = kmalloc(sizeof(struct dc_kbd), GFP_KERNEL)))
+		return -1;
+	memset(kbd, 0, sizeof(struct dc_kbd));
+
+	dev->private_data = kbd;
+
+	kbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+
+	for (i=0; i<255; i++)
+		set_bit(dc_kbd_keycode[i], kbd->dev.keybit);
+	clear_bit(0, kbd->dev.keybit);
+
+	kbd->dev.private = kbd;
+	kbd->dev.open = dc_kbd_open;
+	kbd->dev.close = dc_kbd_close;
+	kbd->dev.event = NULL;
+
+	kbd->dev.name = dev->product_name;
+	kbd->dev.idbus = BUS_MAPLE;
+	
+	input_register_device(&kbd->dev);
+
+	maple_getcond_callback(dev, dc_kbd_callback, 1, MAPLE_FUNC_KEYBOARD);
+
+	printk(KERN_INFO "input%d: keyboard(0x%lx): %s\n",
+	       kbd->dev.number, data, kbd->dev.name);
+
+	MOD_INC_USE_COUNT;
+
+	return 0;
+}
+
+
+static void dc_kbd_disconnect(struct maple_device *dev)
+{
+	struct dc_kbd *kbd = dev->private_data;
+
+	input_unregister_device(&kbd->dev);
+
+	kfree(kbd);
+
+	MOD_DEC_USE_COUNT;
+}
+
+
+static struct maple_driver dc_kbd_driver = {
+	function:	MAPLE_FUNC_KEYBOARD,
+	name:		"Dreamcast keyboard",
+	connect:	dc_kbd_connect,
+	disconnect:	dc_kbd_disconnect,
+};
+
+
+static int __init dc_kbd_init(void)
+{
+	maple_register_driver(&dc_kbd_driver);
+	return 0;
+}
+
+
+static void __exit dc_kbd_exit(void)
+{
+	maple_unregister_driver(&dc_kbd_driver);
+}
+
+
+module_init(dc_kbd_init);
+module_exit(dc_kbd_exit);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */

drivers/input/keyboard/ps2serkbd.c

+/*
+ * based on: sunkbd.c and ps2serkbd.c
+ *
+ * $Id: ps2serkbd.c,v 1.5 2001/09/25 10:12:07 vojtech Exp $
+ */
+
+/*
+ * PS/2 keyboard via adapter at serial port driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/tqueue.h>
+
+#define ATKBD_CMD_SETLEDS	0x10ed
+#define ATKBD_CMD_GSCANSET	0x11f0
+#define ATKBD_CMD_SSCANSET	0x10f0
+#define ATKBD_CMD_GETID		0x02f2
+#define ATKBD_CMD_ENABLE	0x00f4
+#define ATKBD_CMD_RESET_DIS	0x00f5
+#define ATKBD_CMD_SETALL_MB	0x00f8
+#define ATKBD_CMD_EX_ENABLE	0x10ea
+#define ATKBD_CMD_EX_SETLEDS	0x20eb
+
+#define ATKBD_RET_ACK		0xfa
+#define ATKBD_RET_NAK		0xfe
+
+#define ATKBD_KEY_UNKNOWN	  0
+#define ATKBD_KEY_BAT		251
+#define ATKBD_KEY_EMUL0		252
+#define ATKBD_KEY_EMUL1		253
+#define ATKBD_KEY_RELEASE	254
+#define ATKBD_KEY_NULL		255
+
+static unsigned char ps2serkbd_set2_keycode[512] = {
+    0, 67, 65, 63, 61, 59, 60, 88, 0, 68, 66, 64, 62, 15, 41, 85,
+    0, 56, 42, 0, 29, 16, 2, 89, 0, 0, 44, 31, 30, 17, 3, 90,
+    0, 46, 45, 32, 18, 5, 4, 91, 0, 57, 47, 33, 20, 19, 6, 0,
+    0, 49, 48, 35, 34, 21, 7, 0, 0, 0, 50, 36, 22, 8, 9, 0,
+    0, 51, 37, 23, 24, 11, 10, 0, 0, 52, 53, 38, 39, 25, 12, 0,
+    122, 89, 40,120, 26, 13, 0, 0, 58, 54, 28, 27, 0, 43, 0, 0,
+    85, 86, 90, 91, 92, 93, 14, 94, 95, 79, 0, 75, 71,121, 0,123,
+    82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
+    252, 0, 0, 65, 99, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0, 0, 0,251, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+    252,253, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+    254, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,
+    0, 0, 92, 90, 85, 0,137, 0, 0, 0, 0, 91, 89,144,115, 0,
+    136,100,255, 0, 97,149,164, 0,156, 0, 0,140,115, 0, 0,125,
+    0,150, 0,154,152,163,151,126,112,166, 0,140, 0,147, 0,127,
+    159,167,139,160,163, 0, 0,116,158, 0,150,165, 0, 0, 0,142,
+    157, 0,114,166,168, 0, 0, 0,155, 0, 98,113, 0,148, 0,138,
+    0, 0, 0, 0, 0, 0,153,140, 0, 0, 96, 0, 0, 0,143, 0,
+    133, 0,116, 0,143, 0,174,133, 0,107, 0,105,102, 0, 0,112,
+    110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119
+};
+
+/*
+ * Per-keyboard data.
+ */
+
+struct ps2serkbd {
+    unsigned char keycode[512];
+    struct input_dev dev;
+    struct serio *serio;
+    char name[64];
+    char phys[32];
+    struct tq_struct tq;
+    unsigned char cmdbuf[4];
+    unsigned char cmdcnt;
+    unsigned char set;
+    char release;
+    char ack;
+    char emul;
+    char error;
+    unsigned short id;
+};
+
+/*
+ * ps2serkbd_interrupt() is called by the low level driver when a character
+ * is received.
+ */
+
+static void ps2serkbd_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
+{
+    static int event_count=0;
+    struct ps2serkbd* ps2serkbd = serio->private;
+    int code=data;
+
+#if 0
+    printk(KERN_WARNING "ps2serkbd.c(%8d): (scancode %#x)\n", event_count, data);
+#endif
+    event_count++;
+
+    switch (code) {
+    case ATKBD_RET_ACK:
+        ps2serkbd->ack = 1;
+        return;
+    case ATKBD_RET_NAK:
+        ps2serkbd->ack = -1;
+        return;
+    }
+
+    if (ps2serkbd->cmdcnt) {
+        ps2serkbd->cmdbuf[--ps2serkbd->cmdcnt] = code;
+        return;
+    }
+
+    switch (ps2serkbd->keycode[code]) {
+    case ATKBD_KEY_BAT:
+        queue_task(&ps2serkbd->tq, &tq_immediate);
+        mark_bh(IMMEDIATE_BH);
+        return;
+    case ATKBD_KEY_EMUL0:
+        ps2serkbd->emul = 1;
+        return;
+    case ATKBD_KEY_EMUL1:
+        ps2serkbd->emul = 2;
+        return;
+    case ATKBD_KEY_RELEASE:
+        ps2serkbd->release = 1;
+        return;
+    }
+
+    if (ps2serkbd->emul) {
+        if (--ps2serkbd->emul) return;
+        code |= 0x100;
+    }
+
+    switch (ps2serkbd->keycode[code]) {
+    case ATKBD_KEY_NULL:
+        break;
+    case ATKBD_KEY_UNKNOWN:
+        printk(KERN_WARNING "ps2serkbd.c: Unknown key (set %d, scancode %#x) %s.\n",
+        ps2serkbd->set, code, ps2serkbd->release ? "released" : "pressed");
+        break;
+    default:
+        input_report_key(&ps2serkbd->dev, ps2serkbd->keycode[code], !ps2serkbd->release);
+    }
+
+    ps2serkbd->release = 0;
+}
+
+/*
+ * ps2serkbd_event() handles events from the input module.
+ */
+
+static int ps2serkbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
+{
+    switch (type) {
+
+    case EV_LED:
+
+        return 0;
+    }
+
+    return -1;
+}
+
+static int ps2serkbd_initialize(struct ps2serkbd *ps2serkbd) 
+{
+    return 0;
+}
+
+static void ps2serkbd_reinit(void *data) 
+{
+}
+
+
+static void ps2serkbd_connect(struct serio *serio, struct serio_dev *dev)
+{
+    struct ps2serkbd *ps2serkbd;
+    int i;
+
+    if ((serio->type & SERIO_TYPE) != SERIO_RS232)
+        return;
+
+    if ((serio->type & SERIO_PROTO) && (serio->type & SERIO_PROTO) != SERIO_PS2SER)
+        return;
+
+
+    if (!(ps2serkbd = kmalloc(sizeof(struct ps2serkbd), GFP_KERNEL)))
+        return;
+
+    memset(ps2serkbd, 0, sizeof(struct ps2serkbd));
+
+    ps2serkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
+    ps2serkbd->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
+
+    ps2serkbd->serio = serio;
+
+    ps2serkbd->dev.keycode = ps2serkbd->keycode;
+    ps2serkbd->dev.event = ps2serkbd_event;
+    ps2serkbd->dev.private = ps2serkbd;
+
+    ps2serkbd->tq.routine = ps2serkbd_reinit;
+    ps2serkbd->tq.data = ps2serkbd;
+
+    serio->private = ps2serkbd;
+
+    if (serio_open(serio, dev)) {
+        kfree(ps2serkbd);
+        return;
+    }
+
+    if (ps2serkbd_initialize(ps2serkbd) < 0) {
+        serio_close(serio);
+        kfree(ps2serkbd);
+        return;
+    }
+
+    ps2serkbd->set = 4;
+
+    if (ps2serkbd->set == 4) {
+        ps2serkbd->dev.ledbit[0] |= 0;
+        sprintf(ps2serkbd->name, "AT Set 2 Extended keyboard\n");
+    }
+    memcpy(ps2serkbd->keycode, ps2serkbd_set2_keycode, sizeof(ps2serkbd->keycode));
+
+    sprintf(ps2serkbd->phys, "%s/input0", serio->phys);
+
+    ps2serkbd->dev.name = ps2serkbd->name;
+    ps2serkbd->dev.phys = ps2serkbd->phys;
+    ps2serkbd->dev.idbus = BUS_RS232; 
+    ps2serkbd->dev.idvendor = SERIO_PS2SER;
+    ps2serkbd->dev.idproduct = ps2serkbd->set;
+    ps2serkbd->dev.idversion = ps2serkbd->id;
+
+    for (i = 0; i < 512; i++)
+        if (ps2serkbd->keycode[i] && ps2serkbd->keycode[i] <= 250)
+            set_bit(ps2serkbd->keycode[i], ps2serkbd->dev.keybit);
+
+    input_register_device(&ps2serkbd->dev);
+}
+
+/*
+ * ps2serkbd_disconnect() unregisters and closes behind us.
+ */
+
+static void ps2serkbd_disconnect(struct serio *serio)
+{
+    struct ps2serkbd *ps2serkbd = serio->private;
+    input_unregister_device(&ps2serkbd->dev);
+    serio_close(serio);
+    kfree(ps2serkbd);
+}
+
+static struct serio_dev ps2serkbd_dev = {
+interrupt:
+    ps2serkbd_interrupt,
+connect:
+    ps2serkbd_connect,
+disconnect:
+    ps2serkbd_disconnect
+};
+
+/*
+ * The functions for insering/removing us as a module.
+ */
+
+int __init ps2serkbd_init(void)
+{
+    serio_register_device(&ps2serkbd_dev);
+    return 0;
+}
+
+void __exit ps2serkbd_exit(void)
+{
+    serio_unregister_device(&ps2serkbd_dev);
+}
+
+module_init(ps2serkbd_init);
+module_exit(ps2serkbd_exit);

drivers/input/keyboard/sunkbd.c

+/*
+ * $Id: sunkbd.c,v 1.14 2001/09/25 10:12:07 vojtech Exp $
+ *
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ */
+
+/*
+ * Sun keyboard driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/tqueue.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Sun keyboard driver");
+MODULE_LICENSE("GPL");
+
+static unsigned char sunkbd_keycode[128] = {
+	  0,128,114,129,115, 59, 60, 68, 61, 87, 62, 88, 63,100, 64,  0,
+	 65, 66, 67, 56,103,119, 99, 70,105,130,131,108,106,  1,  2,  3,
+	  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 41, 14,110,113, 98, 55,
+	116,132, 83,133,102, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25,
+	 26, 27,111,127, 71, 72, 73, 74,134,135,107,  0, 29, 30, 31, 32,
+	 33, 34, 35, 36, 37, 38, 39, 40, 43, 28, 96, 75, 76, 77, 82,136,
+	104,137, 69, 42, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54,101,
+	 79, 80, 81,  0,  0,  0,138, 58,125, 57,126,109, 86, 78
+};
+
+#define SUNKBD_CMD_RESET	0x1
+#define SUNKBD_CMD_BELLON	0x2
+#define SUNKBD_CMD_BELLOFF	0x3
+#define SUNKBD_CMD_CLICK	0xa
+#define SUNKBD_CMD_NOCLICK	0xb
+#define SUNKBD_CMD_SETLED	0xe
+#define SUNKBD_CMD_LAYOUT	0xf
+
+#define SUNKBD_RET_RESET	0xff
+#define SUNKBD_RET_ALLUP	0x7f
+#define SUNKBD_RET_LAYOUT	0xfe
+
+#define SUNKBD_LAYOUT_5_MASK	0x20
+#define SUNKBD_RELEASE		0x80
+#define SUNKBD_KEY		0x7f
+
+/*
+ * Per-keyboard data.
+ */
+
+struct sunkbd {
+	unsigned char keycode[128];
+	struct input_dev dev;
+	struct serio *serio;
+	struct tq_struct tq;
+	char name[64];
+	char phys[32];
+	char type;
+	char reset;
+	char layout;
+};
+
+/*
+ * sunkbd_interrupt() is called by the low level driver when a character
+ * is received.
+ */
+
+static void sunkbd_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
+{
+	struct sunkbd* sunkbd = serio->private;
+
+	if (sunkbd->reset <= -1) {		/* If cp[i] is 0xff, sunkbd->reset will stay -1. */
+		sunkbd->reset = data;		/* The keyboard sends 0xff 0xff 0xID on powerup */
+		return;
+	}
+
+	if (sunkbd->layout == -1) {
+		sunkbd->layout = data;
+		return;
+	}
+
+	switch (data) {
+
+		case SUNKBD_RET_RESET:
+			queue_task(&sunkbd->tq, &tq_immediate);
+			mark_bh(IMMEDIATE_BH);
+			sunkbd->reset = -1;
+			return;
+
+		case SUNKBD_RET_LAYOUT:
+			sunkbd->layout = -1;
+			return;
+
+		case SUNKBD_RET_ALLUP: /* All keys released */
+			return;
+
+		default:
+			if (sunkbd->keycode[data & SUNKBD_KEY]) {
+                                input_report_key(&sunkbd->dev, sunkbd->keycode[data & SUNKBD_KEY], !(data & SUNKBD_RELEASE));
+                        } else {
+                                printk(KERN_WARNING "sunkbd.c: Unknown key (scancode %#x) %s.\n",
+                                        data & SUNKBD_KEY, data & SUNKBD_RELEASE ? "released" : "pressed");
+                        }
+	}
+}
+
+/*
+ * sunkbd_event() handles events from the input module.
+ */
+
+static int sunkbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
+{
+	struct sunkbd *sunkbd = dev->private;
+
+	switch (type) {
+
+		case EV_LED:
+
+			sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_SETLED);
+			sunkbd->serio->write(sunkbd->serio, 
+				(!!test_bit(LED_CAPSL, dev->led) << 3) | (!!test_bit(LED_SCROLLL, dev->led) << 2) |
+				(!!test_bit(LED_COMPOSE, dev->led) << 1) | !!test_bit(LED_NUML, dev->led));
+			return 0;
+
+		case EV_SND:
+
+			switch (code) {
+
+				case SND_CLICK:
+					sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_NOCLICK - value);
+					return 0;
+	
+				case SND_BELL:
+					sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_BELLOFF - value);
+					return 0;
+			}
+
+			break;
+	}
+
+	return -1;
+}
+
+/*
+ * sunkbd_initialize() checks for a Sun keyboard attached, and determines
+ * its type.
+ */
+
+static int sunkbd_initialize(struct sunkbd *sunkbd)
+{
+	int t;
+
+	t = 1000;
+	sunkbd->reset = -2;
+	sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_RESET);
+	while (sunkbd->reset < 0 && --t) mdelay(1);
+	if (!t) return -1;
+
+	sunkbd->type = sunkbd->reset;
+
+	if (sunkbd->type == 4) {	/* Type 4 keyboard */
+		t = 250;
+		sunkbd->layout = -2;
+		sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_LAYOUT);
+		while (sunkbd->layout < 0 && --t) mdelay(1);
+		if (!t) return -1;
+		if (sunkbd->layout & SUNKBD_LAYOUT_5_MASK) sunkbd->type = 5;
+	}
+
+	return 0;
+}
+
+/*
+ * sunkbd_reinit() sets leds and beeps to a state the computer remembers they
+ * were in.
+ */
+
+static void sunkbd_reinit(void *data)
+{
+	struct sunkbd *sunkbd = data;
+	int t = 1000;
+
+	while (sunkbd->reset < 0 && --t) mdelay(1);
+
+	sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_SETLED);
+	sunkbd->serio->write(sunkbd->serio, 
+		(!!test_bit(LED_CAPSL, sunkbd->dev.led) << 3) | (!!test_bit(LED_SCROLLL, sunkbd->dev.led) << 2) |
+		(!!test_bit(LED_COMPOSE, sunkbd->dev.led) << 1) | !!test_bit(LED_NUML, sunkbd->dev.led));
+	sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_NOCLICK - !!test_bit(SND_CLICK, sunkbd->dev.snd));
+	sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev.snd));
+}
+
+/*
+ * sunkbd_connect() probes for a Sun keyboard and fills the necessary structures.
+ */
+
+static void sunkbd_connect(struct serio *serio, struct serio_dev *dev)
+{
+	struct sunkbd *sunkbd;
+	int i;
+
+	if ((serio->type & SERIO_TYPE) != SERIO_RS232)
+		return;
+
+	if ((serio->type & SERIO_PROTO) && (serio->type & SERIO_PROTO) != SERIO_SUNKBD)
+		return;
+	
+	if (!(sunkbd = kmalloc(sizeof(struct sunkbd), GFP_KERNEL)))
+		return;
+
+	memset(sunkbd, 0, sizeof(struct sunkbd));
+
+	sunkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_SND) | BIT(EV_REP);
+	sunkbd->dev.ledbit[0] = BIT(LED_CAPSL) | BIT(LED_COMPOSE) | BIT(LED_SCROLLL) | BIT(LED_NUML);
+	sunkbd->dev.sndbit[0] = BIT(SND_CLICK) | BIT(SND_BELL);
+
+	sunkbd->serio = serio;
+
+	sunkbd->tq.routine = sunkbd_reinit;
+	sunkbd->tq.data = sunkbd;
+
+	sunkbd->dev.keycode = sunkbd->keycode;
+	sunkbd->dev.event = sunkbd_event;
+	sunkbd->dev.private = sunkbd;
+
+	serio->private = sunkbd;
+
+	if (serio_open(serio, dev)) {
+		kfree(sunkbd);
+		return;
+	}
+
+	if (sunkbd_initialize(sunkbd) < 0) {
+		serio_close(serio);
+		kfree(sunkbd);
+		return;
+	}
+
+	sprintf(sunkbd->name, "Sun Type %d keyboard", sunkbd->type);
+
+	memcpy(sunkbd->keycode, sunkbd_keycode, sizeof(sunkbd->keycode));
+	for (i = 0; i < 255; i++)
+		set_bit(sunkbd->keycode[i], sunkbd->dev.keybit);
+	clear_bit(0, sunkbd->dev.keybit);
+
+	sprintf(sunkbd->name, "%s/input", serio->phys);
+
+	sunkbd->dev.name = sunkbd->name;
+	sunkbd->dev.phys = sunkbd->phys;
+	sunkbd->dev.idbus = BUS_RS232;
+	sunkbd->dev.idvendor = SERIO_SUNKBD;
+	sunkbd->dev.idproduct = sunkbd->type;
+	sunkbd->dev.idversion = 0x0100;
+
+	input_register_device(&sunkbd->dev);
+
+	printk(KERN_INFO "input: %s on %s\n", sunkbd->name, serio->phys);
+}
+
+/*
+ * sunkbd_disconnect() unregisters and closes behind us.
+ */
+
+static void sunkbd_disconnect(struct serio *serio)
+{
+	struct sunkbd *sunkbd = serio->private;
+	input_unregister_device(&sunkbd->dev);
+	serio_close(serio);
+	kfree(sunkbd);
+}
+
+static struct serio_dev sunkbd_dev = {
+	interrupt:	sunkbd_interrupt,
+	connect:	sunkbd_connect,
+	disconnect:	sunkbd_disconnect
+};
+
+/*
+ * The functions for insering/removing us as a module.
+ */
+
+int __init sunkbd_init(void)
+{
+	serio_register_device(&sunkbd_dev);
+	return 0;
+}
+
+void __exit sunkbd_exit(void)
+{
+	serio_unregister_device(&sunkbd_dev);
+}
+
+module_init(sunkbd_init);
+module_exit(sunkbd_exit);

drivers/input/keyboard/xtkbd.c

+/*
+ * $Id: xtkbd.c,v 1.11 2001/09/25 10:12:07 vojtech Exp $
+ *
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ */
+
+/*
+ * XT keyboard driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("XT keyboard driver");
+MODULE_LICENSE("GPL");
+
+#define XTKBD_EMUL0	0xe0
+#define XTKBD_EMUL1	0xe1
+#define XTKBD_KEY	0x7f
+#define XTKBD_RELEASE	0x80
+
+static unsigned char xtkbd_keycode[256] = {	 
+	  0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,
+	 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+	 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+	 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
+	 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
+	 80, 81, 82, 83,  0,  0,  0, 87, 88,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0, 87, 88,  0,  0,  0,  0,110,111,103,108,105,
+	106
+};
+
+static char *xtkbd_name = "XT Keyboard";
+
+struct xtkbd {
+	unsigned char keycode[256];
+	struct input_dev dev;
+	struct serio *serio;
+	char phys[32];
+};
+
+void xtkbd_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
+{
+	struct xtkbd *xtkbd = serio->private;
+
+	switch (data) {
+		case XTKBD_EMUL0:
+		case XTKBD_EMUL1:
+			return;
+		default:
+
+			if (xtkbd->keycode[data & XTKBD_KEY]) {
+				input_report_key(&xtkbd->dev, xtkbd->keycode[data & XTKBD_KEY], !(data & XTKBD_RELEASE));
+			} else {
+				printk(KERN_WARNING "xtkbd.c: Unknown key (scancode %#x) %s.\n",
+					data & XTKBD_KEY, data & XTKBD_RELEASE ? "released" : "pressed");
+			}
+		}
+}
+
+void xtkbd_connect(struct serio *serio, struct serio_dev *dev)
+{
+	struct xtkbd *xtkbd;
+	int i;
+
+	if ((serio->type & SERIO_TYPE) != SERIO_XT)
+		return;
+
+	if (!(xtkbd = kmalloc(sizeof(struct xtkbd), GFP_KERNEL)))
+		return;
+
+	memset(xtkbd, 0, sizeof(struct xtkbd));
+	
+	xtkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+
+	xtkbd->serio = serio;
+
+	xtkbd->dev.keycode = xtkbd->keycode;
+	xtkbd->dev.private = xtkbd;
+
+	serio->private = xtkbd;
+
+	if (serio_open(serio, dev)) {
+		kfree(xtkbd);
+		return;
+	}
+
+	memcpy(xtkbd->keycode, xtkbd_keycode, sizeof(xtkbd->keycode));
+	for (i = 0; i < 255; i++)
+		set_bit(xtkbd->keycode[i], xtkbd->dev.keybit);
+	clear_bit(0, xtkbd->dev.keybit);
+
+	sprintf(xtkbd->phys, "%s/input0", serio->phys);
+
+	xtkbd->dev.name = xtkbd_name;
+	xtkbd->dev.phys = xtkbd->phys;
+	xtkbd->dev.idbus = BUS_XTKBD;
+	xtkbd->dev.idvendor = 0x0001;
+	xtkbd->dev.idproduct = 0x0001;
+	xtkbd->dev.idversion = 0x0100;
+
+	input_register_device(&xtkbd->dev);
+
+	printk(KERN_INFO "input: %s on %s\n", xtkbd_name, serio->phys);
+}
+
+void xtkbd_disconnect(struct serio *serio)
+{
+	struct xtkbd *xtkbd = serio->private;
+	input_unregister_device(&xtkbd->dev);
+	serio_close(serio);
+	kfree(xtkbd);
+}
+
+struct serio_dev xtkbd_dev = {
+	interrupt:	xtkbd_interrupt,
+	connect:	xtkbd_connect,
+	disconnect:	xtkbd_disconnect
+};
+
+int __init xtkbd_init(void)
+{
+	serio_register_device(&xtkbd_dev);
+	return 0;
+}
+
+void __exit xtkbd_exit(void)
+{
+	serio_unregister_device(&xtkbd_dev);
+}
+
+module_init(xtkbd_init);
+module_exit(xtkbd_exit);

drivers/input/mouse/Config.help

+CONFIG_INPUT_MOUSE
+  Say Y here, and a list of supported mice will be displayed.
+  This option doesn't affect the kernel.
+
+  If unsure, say Y.
+
+CONFIG_MOUSE_PS2
+  Say Y here if you have a PS/2 mouse connected to your system. This
+  includes the standard 2 or 3-button PS/2 mouse, as well as PS/2
+  mice with wheels and extra buttons, Microsoft, Logitech or Genius
+  compatible.
+
+  If unsure, say Y.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called psmouse.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_MOUSE_SERIAL
+  Say Y here if you have a serial (RS-232, COM port) mouse connected
+  to your system. This includes Sun, MouseSystems, Microsoft,
+  Logitech and all other compatible serial mice.
+
+  If unsure, say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sermouse.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_MOUSE_INPORT
+  Say Y here if you have an InPort, Microsoft or ATI XL busmouse.
+  They are rather rare these days.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called inport.o. If you want to compile it as a
+  module, say M here and read <file.:Documentation/modules.txt>.
+
+CONFIG_MOUSE_ATIXL
+  Say Y here if your mouse is of the ATI XL variety.
+
+CONFIG_MOUSE_LOGIBM
+  Say Y here if you have a Logitech busmouse.
+  They are rather rare these days.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called logibm.o. If you want to compile it as a
+  module, say M here and read <file.:Documentation/modules.txt>.
+
+CONFIG_MOUSE_PC110PAD
+  Say Y if you have the IBM PC-110 micro-notebook and want its
+  touchscreen supported.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called pc110pad.o. If you want to compile it as a
+  module, say M here and read <file.:Documentation/modules.txt>.
+
+CONFIG_MOUSE_MAPLE
+  Say Y if you have a DreamCast console and a mouse attached to
+  its Maple bus.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called maplemouse.o. If you want to compile it as a
+  module, say M here and read <file.:Documentation/modules.txt>.
+
+CONFIG_MOUSE_AMIGA
+  Say Y here if you have an Amiga and want its native mouse
+  supported by the kernel.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called amimouse.o. If you want to compile it as a
+  module, say M here and read <file.:Documentation/modules.txt>.
+
+CONFIG_MOUSE_ACORN
+  Say Y here if you have the Acorn RiscPC computer and want its
+  native mouse supported.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called rpcmouse.o. If you want to compile it as a
+  module, say M here and read <file.:Documentation/modules.txt>.

drivers/input/mouse/Config.in

+#
+# Mouse driver configuration
+#
+
+bool 'Mice' CONFIG_INPUT_MOUSE
+
+dep_tristate '  PS/2 mouse' CONFIG_MOUSE_PS2 $CONFIG_INPUT $CONFIG_INPUT_MOUSE $CONFIG_SERIO
+dep_tristate '  Serial mouse' CONFIG_MOUSE_SERIAL $CONFIG_INPUT $CONFIG_INPUT_MOUSE $CONFIG_SERIO
+
+dep_tristate '  InPort/MS/ATIXL busmouse' CONFIG_MOUSE_INPORT $CONFIG_INPUT $CONFIG_INPUT_MOUSE $CONFIG_ISA
+if [ "$CONFIG_MOUSE_INPORT" != "n" ]; then
+   bool '  ATI XL variant' CONFIG_MOUSE_ATIXL
+fi
+dep_tristate '  Logitech busmouse' CONFIG_MOUSE_LOGIBM $CONFIG_INPUT $CONFIG_INPUT_MOUSE $CONFIG_ISA
+dep_tristate '  IBM PC110 touchpad' CONFIG_MOUSE_PC110PAD $CONFIG_INPUT $CONFIG_INPUT_MOUSE $CONFIG_ISA
+if [ "$CONFIG_SH_DREAMCAST" = "y" ]; then
+  dep_tristate '  Maple bus mouse' CONFIG_MOUSE_MAPLE $CONFIG_INPUT $CONFIG_INPUT_MOUSE $CONFIG_MAPLE
+fi
+if [ "$CONFIG_AMIGA" = "y" ]; then
+   dep_tristate '  Amiga mouse' CONFIG_MOUSE_AMIGA $CONFIG_INPUT $CONFIG_INPUT_MOUSE
+fi
+if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
+   dep_tristate '  Acorn RiscPC mouse' CONFIG_MOUSE_ACORN $CONFIG_INPUT $CONFIG_INPUT_MOUSE
+fi

drivers/input/mouse/Makefile

+#
+# Makefile for the mouse drivers.
+#
+
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_MOUSE_AMIGA)	+= amimouse.o
+obj-$(CONFIG_MOUSE_ACORN)	+= rpcmouse.o
+obj-$(CONFIG_MOUSE_INPORT)	+= inport.o
+obj-$(CONFIG_MOUSE_LOGIBM)	+= logibm.o
+obj-$(CONFIG_MOUSE_MAPLE)	+= maplemouse.o
+obj-$(CONFIG_MOUSE_PC110PAD)	+= pc110pad.o
+obj-$(CONFIG_MOUSE_PS2)		+= psmouse.o
+obj-$(CONFIG_MOUSE_SERIAL)	+= sermouse.o
+
+# The global Rules.make.
+
+include $(TOPDIR)/Rules.make

drivers/input/mouse/amimouse.c

+/*
+ * $Id: amimouse.c,v 1.9 2001/09/25 10:12:07 vojtech Exp $
+ *
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ *
+ *  Based on the work of:
+ *	Michael Rausch		James Banks
+ *	Matther Dillon		David Giller
+ *	Nathan Laredo		Linus Torvalds
+ *	Johan Myreen		Jes Sorensen
+ *	Russel King
+ */
+
+/*
+ * Amiga mouse driver for Linux/m68k
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/amigahw.h>
+#include <asm/amigaints.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Amiga mouse driver");
+MODULE_LICENSE("GPL");
+
+static int amimouse_used = 0;
+static int amimouse_lastx, amimouse_lasty;
+static struct input_dev amimouse_dev;
+
+static char *amimouse_name = "Amiga mouse";
+static char *amimouse_phys = "amimouse/input0";
+
+static void amimouse_interrupt(int irq, void *dummy, struct pt_regs *fp)
+{
+	unsigned short joy0dat, potgor;
+	int nx, ny, dx, dy;
+
+	joy0dat = custom.joy0dat;
+
+	nx = joy0dat & 0xff;
+	ny = joy0dat >> 8;
+
+	dx = nx - amimouse_lastx;
+	dy = ny - amimouse_lasty;
+
+	if (dx < -127) dx = (256 + nx) - lastx;
+	if (dx >  127) dx = (nx - 256) - lastx;
+	if (dy < -127) dy = (256 + ny) - lasty;
+	if (dy >  127) dy = (ny - 256) - lasty;
+
+	amimouse_lastx = nx;
+	amimouse_lasty = ny;
+
+	potgor = custom.potgor;
+
+	input_report_rel(&amimouse_dev, REL_X, dx);
+	input_report_rel(&amimouse_dev, REL_Y, dy);
+	
+	input_report_key(&amimouse_dev, BTN_LEFT,   ciaa.pra & 0x40);
+	input_report_key(&amimouse_dev, BTN_MIDDLE, potgor & 0x0100);
+	input_report_key(&amimouse_dev, BTN_RIGHT,  potgor & 0x0400);
+}
+
+static int amimouse_open(struct input_dev *dev)
+{
+	unsigned short joy0dat;
+
+        if (amimouse_used++)
+                return 0;
+
+	joy0dat = custom.joy0dat;
+
+	amimouse_lastx = joy0dat & 0xff;
+	amimouse_lasty = joy0dat >> 8;
+
+	if (request_irq(IRQ_AMIGA_VERTB, amimouse_interrupt, 0, "amimouse", NULL)) {
+                amimouse_used--;
+                printk(KERN_ERR "amimouse.c: Can't allocate irq %d\n", amimouse_irq);
+                return -EBUSY;
+        }
+
+        return 0;
+}
+
+static void amimouse_close(struct input_dev *dev)
+{
+        if (!--amimouse_used)
+		free_irq(IRQ_AMIGA_VERTB, amimouse_interrupt);
+}
+
+static int __init amimouse_init(void)
+{
+	if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_MOUSE))
+		return -ENODEV;
+
+	amimouse_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+	amimouse_dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
+	amimouse_dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+	amimouse_dev.open = amimouse_open;
+	amimouse_dev.close = amimouse_close;
+
+	amimouse_dev.name = amimouse_name;
+	amimouse_dev.phys = amimouse_phys;
+	amimouse_dev.idbus = BUS_AMIGA;
+	amimouse_dev.idvendor = 0x0001;
+	amimouse_dev.idproduct = 0x0002;
+	amimouse_dev.idversion = 0x0100;
+        
+	input_register_device(&amimouse_dev);
+
+        printk(KERN_INFO "input: %s at joy0dat\n", amimouse_name);
+}
+
+static void __exit amimouse_exit(void)
+{
+        input_unregister_device(&amimouse_dev);
+}
+
+module_init(amimouse_init);
+module_exit(amimouse_exit);

drivers/input/mouse/inport.c

+/*
+ * $Id: inport.c,v 1.11 2001/09/25 10:12:07 vojtech Exp $
+ *
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ *
+ *  Based on the work of:
+ *	Teemu Rantanen		Derrick Cole
+ *	Peter Cervasio		Christoph Niemann
+ *	Philip Blundell		Russell King
+ *	Bob Harris
+ */
+
+/*
+ * Inport (ATI XL and Microsoft) busmouse driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/input.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Inport (ATI XL and Microsoft) busmouse driver");
+MODULE_LICENSE("GPL");
+
+#define INPORT_BASE		0x23c
+#define INPORT_EXTENT		4
+
+#define INPORT_CONTROL_PORT	INPORT_BASE + 0
+#define INPORT_DATA_PORT	INPORT_BASE + 1
+#define INPORT_SIGNATURE_PORT	INPORT_BASE + 2
+
+#define INPORT_REG_BTNS	0x00
+#define INPORT_REG_X		0x01
+#define INPORT_REG_Y		0x02
+#define INPORT_REG_MODE		0x07
+#define INPORT_RESET		0x80
+
+#ifdef CONFIG_INPUT_ATIXL
+#define INPORT_NAME		"ATI XL Mouse"
+#define INPORT_VENDOR		0x0002
+#define INPORT_SPEED_30HZ	0x01
+#define INPORT_SPEED_50HZ	0x02
+#define INPORT_SPEED_100HZ	0x03
+#define INPORT_SPEED_200HZ	0x04
+#define INPORT_MODE_BASE	INPORT_SPEED_100HZ
+#define INPORT_MODE_IRQ		0x08
+#else
+#define INPORT_NAME		"Microsoft InPort Mouse"
+#define INPORT_VENDOR		0x0001
+#define INPORT_MODE_BASE	0x10
+#define INPORT_MODE_IRQ		0x01
+#endif
+#define INPORT_MODE_HOLD	0x20
+
+#define INPORT_IRQ		5
+
+MODULE_PARM(inport_irq, "i");
+
+static int inport_irq = INPORT_IRQ;
+static int inport_used = 0;
+
+static void inport_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+static int inport_open(struct input_dev *dev)
+{
+	if (!inport_used++) {
+		if (request_irq(inport_irq, inport_interrupt, 0, "inport", NULL))
+			return -EBUSY;
+		outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+		outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
+	}
+
+	return 0;
+}
+
+static void inport_close(struct input_dev *dev)
+{
+	if (!--inport_used) {
+		outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+		outb(INPORT_MODE_BASE, INPORT_DATA_PORT);
+		free_irq(inport_irq, NULL);
+	}
+}
+
+static struct input_dev inport_dev = {
+	evbit:		{ BIT(EV_KEY) | BIT(EV_REL) },
+	keybit: 	{ [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) },
+	relbit:		{ BIT(REL_X) | BIT(REL_Y) },
+	open:		inport_open,
+	close:		inport_close,
+	name:		INPORT_NAME,
+	phys:		"isa023c/input0",
+	idbus:		BUS_ISA,
+	idvendor:	INPORT_VENDOR,
+	idproduct:	0x0001,
+	idversion:	0x0100,
+};
+
+static void inport_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	unsigned char buttons;
+
+	outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+	outb(INPORT_MODE_HOLD | INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
+
+	outb(INPORT_REG_X, INPORT_CONTROL_PORT);
+	input_report_rel(&inport_dev, REL_X, inb(INPORT_DATA_PORT));
+
+	outb(INPORT_REG_Y, INPORT_CONTROL_PORT);
+	input_report_rel(&inport_dev, REL_Y, inb(INPORT_DATA_PORT));
+
+	outb(INPORT_REG_BTNS, INPORT_CONTROL_PORT);
+	buttons = inb(INPORT_DATA_PORT);
+
+	input_report_key(&inport_dev, BTN_MIDDLE, buttons & 1);
+	input_report_key(&inport_dev, BTN_LEFT,   buttons & 2);
+	input_report_key(&inport_dev, BTN_RIGHT,  buttons & 4);
+
+	outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+	outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
+}
+
+#ifndef MODULE
+static int __init inport_setup(char *str)
+{
+        int ints[4];
+        str = get_options(str, ARRAY_SIZE(ints), ints);
+        if (ints[0] > 0) inport_irq = ints[1];
+        return 1;
+}
+__setup("inport_irq=", inport_setup);
+#endif
+
+static int __init inport_init(void)
+{
+	unsigned char a,b,c;
+
+	if (check_region(INPORT_BASE, INPORT_EXTENT))
+		return -EBUSY;
+
+	a = inb(INPORT_SIGNATURE_PORT);
+	b = inb(INPORT_SIGNATURE_PORT);
+	c = inb(INPORT_SIGNATURE_PORT);
+	if (( a == b ) || ( a != c ))
+		return -ENODEV;
+
+	outb(INPORT_RESET, INPORT_CONTROL_PORT);
+	outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+	outb(INPORT_MODE_BASE, INPORT_DATA_PORT);
+
+	request_region(INPORT_BASE, INPORT_EXTENT, "inport");
+
+	input_register_device(&inport_dev);
+
+	printk(KERN_INFO "input: " INPORT_NAME " at %#x irq %d\n",
+		INPORT_BASE, inport_irq);
+
+	return 0;
+}
+
+static void __exit inport_exit(void)
+{
+	input_unregister_device(&inport_dev);
+	release_region(INPORT_BASE, INPORT_EXTENT);
+}
+
+module_init(inport_init);
+module_exit(inport_exit);

drivers/input/mouse/logibm.c

+/*
+ * $Id: logibm.c,v 1.11 2001/09/25 10:12:07 vojtech Exp $
+ *
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ *
+ *  Based on the work of:
+ *	James Banks		Matthew Dillon
+ *	David Giller		Nathan Laredo
+ *	Linus Torvalds		Johan Myreen
+ *	Cliff Matthews		Philip Blundell
+ *	Russell King
+ */
+
+/*
+ * Logitech Bus Mouse Driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/input.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Logitech busmouse driver");
+MODULE_LICENSE("GPL");
+
+#define	LOGIBM_BASE		0x23c
+#define	LOGIBM_EXTENT		4
+
+#define	LOGIBM_DATA_PORT	LOGIBM_BASE + 0
+#define	LOGIBM_SIGNATURE_PORT	LOGIBM_BASE + 1
+#define	LOGIBM_CONTROL_PORT	LOGIBM_BASE + 2
+#define	LOGIBM_CONFIG_PORT	LOGIBM_BASE + 3
+
+#define	LOGIBM_ENABLE_IRQ	0x00
+#define	LOGIBM_DISABLE_IRQ	0x10
+#define	LOGIBM_READ_X_LOW	0x80
+#define	LOGIBM_READ_X_HIGH	0xa0
+#define	LOGIBM_READ_Y_LOW	0xc0
+#define	LOGIBM_READ_Y_HIGH	0xe0
+
+#define LOGIBM_DEFAULT_MODE	0x90
+#define LOGIBM_CONFIG_BYTE	0x91
+#define LOGIBM_SIGNATURE_BYTE	0xa5
+
+#define LOGIBM_IRQ		5
+
+MODULE_PARM(logibm_irq, "i");
+
+static int logibm_irq = LOGIBM_IRQ;
+static int logibm_used = 0;
+
+static void logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+static int logibm_open(struct input_dev *dev)
+{
+	if (logibm_used++)
+		return 0;
+	if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) {
+		logibm_used--;
+		printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq);
+		return -EBUSY;
+	}
+	outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT);
+	return 0;
+}
+
+static void logibm_close(struct input_dev *dev)
+{
+	if (--logibm_used)
+		return;
+	outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT);
+	free_irq(logibm_irq, NULL);
+}
+
+static struct input_dev logibm_dev = {
+	evbit:		{ BIT(EV_KEY) | BIT(EV_REL) },
+	keybit: 	{ [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) },
+	relbit:		{ BIT(REL_X) | BIT(REL_Y) },
+	open:		logibm_open,
+	close:		logibm_close,
+	name:		"Logitech bus mouse",
+	phys:		"isa023c/input0",
+	idbus:		BUS_ISA,
+	idvendor:	0x0003,
+	idproduct:	0x0001,
+	idversion:	0x0100,
+};
+
+static void logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	char dx, dy;
+	unsigned char buttons;
+
+	outb(LOGIBM_READ_X_LOW, LOGIBM_CONTROL_PORT);
+	dx = (inb(LOGIBM_DATA_PORT) & 0xf);
+	outb(LOGIBM_READ_X_HIGH, LOGIBM_CONTROL_PORT);
+	dx |= (inb(LOGIBM_DATA_PORT) & 0xf) << 4;
+	outb(LOGIBM_READ_Y_LOW, LOGIBM_CONTROL_PORT);
+	dy = (inb(LOGIBM_DATA_PORT) & 0xf);
+	outb(LOGIBM_READ_Y_HIGH, LOGIBM_CONTROL_PORT);
+	buttons = inb(LOGIBM_DATA_PORT);
+	dy |= (buttons & 0xf) << 4;
+	buttons = ~buttons;
+
+	input_report_rel(&logibm_dev, REL_X, dx);
+	input_report_rel(&logibm_dev, REL_Y, 255 - dy);
+	input_report_key(&logibm_dev, BTN_MIDDLE, buttons & 1);
+	input_report_key(&logibm_dev, BTN_LEFT,   buttons & 2);
+	input_report_key(&logibm_dev, BTN_RIGHT,  buttons & 4);
+}
+
+#ifndef MODULE
+static int __init logibm_setup(char *str)
+{
+        int ints[4];
+        str = get_options(str, ARRAY_SIZE(ints), ints);
+        if (ints[0] > 0) logibm_irq = ints[1];
+        return 1;
+}
+__setup("logibm_irq=", logibm_setup);
+#endif
+
+static int __init logibm_init(void)
+{
+	if (request_region(LOGIBM_BASE, LOGIBM_EXTENT, "logibm")) {
+		printk(KERN_ERR "logibm.c: Can't allocate ports at %#x\n", LOGIBM_BASE);
+		return -EBUSY;
+	}
+
+	outb(LOGIBM_CONFIG_BYTE, LOGIBM_CONFIG_PORT);
+	outb(LOGIBM_SIGNATURE_BYTE, LOGIBM_SIGNATURE_PORT);
+	udelay(100);
+
+	if (inb(LOGIBM_SIGNATURE_PORT) != LOGIBM_SIGNATURE_BYTE) {
+		release_region(LOGIBM_BASE, LOGIBM_EXTENT);
+		printk(KERN_ERR "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE);
+		return -ENODEV;
+	}
+
+	outb(LOGIBM_DEFAULT_MODE, LOGIBM_CONFIG_PORT);
+	outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT);
+
+	input_register_device(&logibm_dev);
+
+	printk(KERN_INFO "input: Logitech bus mouse at %#x irq %d\n", LOGIBM_BASE, logibm_irq);
+
+	return 0;
+}
+
+static void __exit logibm_exit(void)
+{
+	input_unregister_device(&logibm_dev);
+	release_region(LOGIBM_BASE, LOGIBM_EXTENT);
+}
+
+module_init(logibm_init);
+module_exit(logibm_exit);

drivers/input/mouse/maplemouse.c

+/*
+ *	$Id: maplemouse.c,v 1.1 2001/11/02 17:27:32 jsimmons Exp $
+ * 	SEGA Dreamcast mouse driver
+ *	Based on drivers/usb/usbmouse.c
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/maple.h>
+
+MODULE_AUTHOR("YAEGASHI Takeshi <t@keshi.org>");
+MODULE_DESCRIPTION("SEGA Dreamcast mouse driver");
+
+struct dc_mouse {
+	struct input_dev dev;
+	int open;
+};
+
+
+static void dc_mouse_callback(struct mapleq *mq)
+{
+	int buttons, relx, rely, relz;
+	struct maple_device *mapledev = mq->dev;
+	struct dc_mouse *mouse = mapledev->private_data;
+	struct input_dev *dev = &mouse->dev;
+	unsigned char *res = mq->recvbuf;
+
+	buttons = ~res[8];
+	relx=*(unsigned short *)(res+12)-512;
+	rely=*(unsigned short *)(res+14)-512;
+	relz=*(unsigned short *)(res+16)-512;
+
+	input_report_key(dev, BTN_LEFT,   buttons&4);
+	input_report_key(dev, BTN_MIDDLE, buttons&9);
+	input_report_key(dev, BTN_RIGHT,  buttons&2);
+	input_report_rel(dev, REL_X,      relx);
+	input_report_rel(dev, REL_Y,      rely);
+	input_report_rel(dev, REL_WHEEL,  relz);
+}
+
+
+static int dc_mouse_open(struct input_dev *dev)
+{
+	struct dc_mouse *mouse = dev->private;
+	mouse->open++;
+	return 0;
+}
+
+
+static void dc_mouse_close(struct input_dev *dev)
+{
+	struct dc_mouse *mouse = dev->private;
+	mouse->open--;
+}
+
+
+static int dc_mouse_connect(struct maple_device *dev)
+{
+	unsigned long data = be32_to_cpu(dev->devinfo.function_data[0]);
+	struct dc_mouse *mouse;
+
+	if (!(mouse = kmalloc(sizeof(struct dc_mouse), GFP_KERNEL)))
+		return -1;
+	memset(mouse, 0, sizeof(struct dc_mouse));
+
+	dev->private_data = mouse;
+
+	mouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+	mouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
+	mouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL);
+
+	mouse->dev.private = mouse;
+	mouse->dev.open = dc_mouse_open;
+	mouse->dev.close = dc_mouse_close;
+	mouse->dev.event = NULL;
+
+	mouse->dev.name = dev->product_name;
+	mouse->dev.idbus = BUS_MAPLE;
+	
+	input_register_device(&mouse->dev);
+
+	maple_getcond_callback(dev, dc_mouse_callback, 1, MAPLE_FUNC_MOUSE);
+
+	printk(KERN_INFO "input%d: mouse(0x%lx): %s\n",
+	       mouse->dev.number, data, mouse->dev.name);
+
+	MOD_INC_USE_COUNT;
+
+	return 0;
+}
+
+
+static void dc_mouse_disconnect(struct maple_device *dev)
+{
+	struct dc_mouse *mouse = dev->private_data;
+
+	input_unregister_device(&mouse->dev);
+
+	kfree(mouse);
+
+	MOD_DEC_USE_COUNT;
+}
+
+
+static struct maple_driver dc_mouse_driver = {
+	function:	MAPLE_FUNC_MOUSE,
+	name:		"Dreamcast mouse",
+	connect:	dc_mouse_connect,
+	disconnect:	dc_mouse_disconnect,
+};
+
+
+static int __init dc_mouse_init(void)
+{
+	maple_register_driver(&dc_mouse_driver);
+	return 0;
+}
+
+
+static void __exit dc_mouse_exit(void)
+{
+	maple_unregister_driver(&dc_mouse_driver);
+}
+
+
+module_init(dc_mouse_init);
+module_exit(dc_mouse_exit);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */

drivers/input/mouse/pc110pad.c

+/*
+ * $Id: pc110pad.c,v 1.12 2001/09/25 10:12:07 vojtech Exp $
+ *
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ *
+ *  Based on the work of:
+ *	Alan Cox	Robin O'Leary	
+ */
+
+/*
+ * IBM PC110 touchpad driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/input.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("IBM PC110 touchpad driver");
+MODULE_LICENSE("GPL");
+
+#define PC110PAD_OFF	0x30
+#define PC110PAD_ON	0x38
+
+static int pc110pad_irq = 10;
+static int pc110pad_io = 0x15e0;
+
+static struct input_dev pc110pad_dev;
+static int pc110pad_data[3];
+static int pc110pad_count;
+static int pc110pad_used;
+
+static char *pc110pad_name = "IBM PC110 TouchPad";
+static char *pc110pad_phys = "isa15e0/input0";
+
+static void pc110pad_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+	int value     = inb_p(pc110pad_io);
+	int handshake = inb_p(pc110pad_io + 2);
+
+	outb_p(handshake |  1, pc110pad_io + 2);
+	outb_p(handshake & ~1, pc110pad_io + 2);
+	inb_p(0x64);
+
+	pc110pad_data[pc110pad_count++] = value;
+
+	if (pc110pad_count < 3) return;
+	
+	input_report_key(&pc110pad_dev, BTN_TOUCH,
+		pc110pad_data[0] & 0x01);
+	input_report_abs(&pc110pad_dev, ABS_X,
+		pc110pad_data[1] | ((pc110pad_data[0] << 3) & 0x80) | ((pc110pad_data[0] << 1) & 0x100));
+	input_report_abs(&pc110pad_dev, ABS_Y,
+		pc110pad_data[2] | ((pc110pad_data[0] << 4) & 0x80));
+
+	pc110pad_count = 0;
+}
+
+static void pc110pad_close(struct input_dev *dev)
+{
+	if (!--pc110pad_used)
+		outb(PC110PAD_OFF, pc110pad_io + 2);
+}
+
+static int pc110pad_open(struct input_dev *dev)
+{
+	unsigned long flags;
+	
+	if (pc110pad_used++)
+		return 0;
+
+	save_flags(flags);
+	cli();
+	pc110pad_interrupt(0,0,0);
+	pc110pad_interrupt(0,0,0);
+	pc110pad_interrupt(0,0,0);
+	outb(PC110PAD_ON, pc110pad_io + 2);
+	pc110pad_count = 0;
+	restore_flags(flags);
+
+	return 0;
+}
+
+static int __init pc110pad_init(void)
+{
+	if (request_region(pc110pad_io, 4, "pc110pad"))
+	{
+		printk(KERN_ERR "pc110pad: I/O area %#x-%#x in use.\n", pc110pad_io, pc110pad_io + 4);
+		return -EBUSY;
+	}
+
+	outb(PC110PAD_OFF, pc110pad_io + 2);
+
+	if (request_irq(pc110pad_irq, pc110pad_interrupt, 0, "pc110pad", 0))
+	{
+		release_region(pc110pad_io, 4);
+		printk(KERN_ERR "pc110pad: Unable to get irq %d.\n", pc110pad_irq);
+		return -EBUSY;
+	}
+
+        pc110pad_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+        pc110pad_dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
+        pc110pad_dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+
+	pc110pad_dev.absmax[ABS_X] = 0x1ff;
+	pc110pad_dev.absmax[ABS_Y] = 0x0ff;
+        
+	pc110pad_dev.open = pc110pad_open;
+        pc110pad_dev.close = pc110pad_close;
+
+	pc110pad_dev.name = pc110pad_name;
+	pc110pad_dev.phys = pc110pad_phys;
+	pc110pad_dev.idbus = BUS_ISA;
+	pc110pad_dev.idvendor = 0x0003;
+	pc110pad_dev.idproduct = 0x0001;
+	pc110pad_dev.idversion = 0x0100;
+
+	input_register_device(&pc110pad_dev);	
+
+	printk(KERN_INFO "input: %s at %#x irq %d\n",
+		pc110pad_name, pc110pad_io, pc110pad_irq);
+	
+	return 0;
+}
+ 
+static void __exit pc110pad_exit(void)
+{
+	input_unregister_device(&pc110pad_dev);	
+
+	outb(PC110PAD_OFF, pc110pad_io + 2);
+
+	free_irq(pc110pad_irq, 0);
+	release_region(pc110pad_io, 4);
+}
+
+module_init(pc110pad_init);
+module_exit(pc110pad_exit);

drivers/input/mouse/psmouse.c

+/*
+ * $Id: psmouse.c,v 1.18 2002/03/13 10:03:43 vojtech Exp $
+ *
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+#include <linux/tqueue.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("PS/2 mouse driver");
+MODULE_LICENSE("GPL");
+
+#define PSMOUSE_CMD_SETSCALE11	0x00e6
+#define PSMOUSE_CMD_SETRES	0x10e8
+#define PSMOUSE_CMD_GETINFO	0x03e9
+#define PSMOUSE_CMD_SETSTREAM	0x00ea
+#define PSMOUSE_CMD_POLL	0x03eb	
+#define PSMOUSE_CMD_GETID	0x01f2
+#define PSMOUSE_CMD_SETRATE	0x10f3
+#define PSMOUSE_CMD_ENABLE	0x00f4
+#define PSMOUSE_CMD_RESET_DIS	0x00f6
+
+#define PSMOUSE_RET_BAT		0xaa
+#define PSMOUSE_RET_ACK		0xfa
+#define PSMOUSE_RET_NAK		0xfe
+
+struct psmouse {
+	struct input_dev dev;
+	struct serio *serio;
+	char *vendor;
+	char *name;
+	struct tq_struct tq;
+	unsigned char cmdbuf[8];
+	unsigned char packet[8];
+	unsigned char cmdcnt;
+	unsigned char pktcnt;
+	unsigned char type;
+	unsigned long last;
+	char acking;
+	char ack;
+	char error;
+	char devname[64];
+	char phys[32];
+};
+
+#define PSMOUSE_PS2	1
+#define PSMOUSE_PS2PP	2
+#define PSMOUSE_PS2TPP	3
+#define PSMOUSE_GENPS	4
+#define PSMOUSE_IMPS	5
+#define PSMOUSE_IMEX	6
+
+static char *psmouse_protocols[] = { "None", "PS/2", "PS2++", "PS2T++", "GenPS/2", "ImPS/2", "ImExPS/2" };
+
+/*
+ * psmouse_process_packet() anlyzes the PS/2 mouse packet contents and
+ * reports relevant events to the input module.
+ */
+
+static void psmouse_process_packet(struct psmouse *psmouse)
+{
+	struct input_dev *dev = &psmouse->dev;
+	unsigned char *packet = psmouse->packet;
+
+/*
+ * The PS2++ protocol is a little bit complex
+ */
+
+	if (psmouse->type == PSMOUSE_PS2PP || psmouse->type == PSMOUSE_PS2TPP) {
+
+		if ((packet[0] & 0x40) == 0x40 && (int) packet[1] - (int) ((packet[0] & 0x10) << 4) > 191 ) {
+
+			switch (((packet[1] >> 4) & 0x03) | ((packet[0] >> 2) & 0xc0)) {
+
+			case 1: /* Mouse extra info */
+
+				input_report_rel(dev, packet[2] & 0x80 ? REL_HWHEEL : REL_WHEEL,
+					(int) (packet[2] & 7) - (int) (packet[2] & 8));
+				input_report_key(dev, BTN_SIDE, (packet[2] >> 4) & 1);
+				input_report_key(dev, BTN_EXTRA, (packet[2] >> 5) & 1);
+					
+				break;
+
+			case 3: /* TouchPad extra info */
+
+				input_report_rel(dev, packet[2] & 0x08 ? REL_HWHEEL : REL_WHEEL,
+					(int) ((packet[2] >> 4) & 7) - (int) ((packet[2] >> 4) & 8));
+				packet[0] = packet[2] | 0x08;
+
+				break;
+
+			default:
+
+				printk(KERN_WARNING "psmouse.c: Received PS2++ packet #%x, but don't know how to handle.\n",
+					((packet[1] >> 4) & 0x03) | ((packet[0] >> 2) & 0xc0));
+
+			}
+
+		packet[0] &= 0x0f;
+		packet[1] = 0;
+		packet[2] = 0;
+
+		}
+	}
+
+/*
+ * Scroll wheel on IntelliMice, scroll buttons on NetMice
+ */
+
+	if (psmouse->type == PSMOUSE_IMPS || psmouse->type == PSMOUSE_GENPS)
+		input_report_rel(dev, REL_WHEEL, (signed char) packet[3]);
+
+/*
+ * Scroll wheel and buttons on IntelliMouse Explorer
+ */
+
+	if (psmouse->type == PSMOUSE_IMEX) {
+		input_report_rel(dev, REL_WHEEL, (int) (packet[3] & 7) - (int) (packet[2] & 8));
+		input_report_key(dev, BTN_SIDE, (packet[3] >> 4) & 1);
+		input_report_key(dev, BTN_EXTRA, (packet[3] >> 5) & 1);
+	}
+
+/*
+ * Extra buttons on Genius NewNet 3D
+ */
+
+	if (psmouse->type == PSMOUSE_GENPS) {
+		input_report_key(dev, BTN_SIDE, (packet[0] >> 6) & 1);
+		input_report_key(dev, BTN_EXTRA, (packet[0] >> 7) & 1);
+	}
+
+/*
+ * Generic PS/2 Mouse
+ */
+
+	input_report_key(dev, BTN_LEFT,    packet[0]       & 1);
+	input_report_key(dev, BTN_MIDDLE, (packet[0] >> 2) & 1);
+	input_report_key(dev, BTN_RIGHT,  (packet[0] >> 1) & 1);
+
+	input_report_rel(dev, REL_X, packet[1] ? (int) packet[1] - (int) ((packet[0] << 4) & 0x100) : 0);
+	input_report_rel(dev, REL_Y, packet[2] ? (int) ((packet[0] << 3) & 0x100) - (int) packet[2] : 0);
+
+}
+
+/*
+ * psmouse_interrupt() handles incoming characters, either gathering them into
+ * packets or passing them to the command routine as command output.
+ */
+
+static void psmouse_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
+{
+	struct psmouse *psmouse = serio->private;
+
+	if (psmouse->acking) {
+		switch (data) {
+			case PSMOUSE_RET_ACK:
+				psmouse->ack = 1;
+				break;
+			case PSMOUSE_RET_NAK:
+				psmouse->ack = -1;
+				break;
+			default:
+				psmouse->ack = 1;	/* Workaround for mice which don't ACK the Get ID command */
+				if (psmouse->cmdcnt)
+					psmouse->cmdbuf[--psmouse->cmdcnt] = data;
+				break;
+		}
+		psmouse->acking = 0;
+		return;
+	}
+
+	if (psmouse->cmdcnt) {
+		psmouse->cmdbuf[--psmouse->cmdcnt] = data;
+		return;
+	}
+
+	if (psmouse->pktcnt && time_after(jiffies, psmouse->last + HZ/20)) {
+		printk(KERN_WARNING "psmouse.c: Lost synchronization, throwing %d bytes away.\n", psmouse->pktcnt);
+		psmouse->pktcnt = 0;
+	}
+	
+	psmouse->last = jiffies;
+	psmouse->packet[psmouse->pktcnt++] = data;
+
+	if (psmouse->pktcnt == 3 + (psmouse->type >= PSMOUSE_GENPS)) {
+		if ((psmouse->packet[0] & 0x08) == 0x08) psmouse_process_packet(psmouse);
+		psmouse->pktcnt = 0;
+		return;
+	}
+
+	if (psmouse->pktcnt == 1 && psmouse->packet[0] == PSMOUSE_RET_BAT) {
+		queue_task(&psmouse->tq, &tq_immediate);
+		mark_bh(IMMEDIATE_BH);
+		return;
+	}	
+}
+
+/*
+ * psmouse_sendbyte() sends a byte to the mouse, and waits for acknowledge.
+ * It doesn't handle retransmission, though it could - because when there would
+ * be need for retransmissions, the mouse has to be replaced anyway.
+ */
+
+static int psmouse_sendbyte(struct psmouse *psmouse, unsigned char byte)
+{
+	int timeout = 10000; /* 100 msec */
+	psmouse->ack = 0;
+	psmouse->acking = 1;
+
+	serio_write(psmouse->serio, byte);
+	while (!psmouse->ack && timeout--) udelay(10);
+
+	return -(psmouse->ack <= 0);
+}
+
+/*
+ * psmouse_command() sends a command and its parameters to the mouse,
+ * then waits for the response and puts it in the param array.
+ */
+
+static int psmouse_command(struct psmouse *psmouse, unsigned char *param, int command)
+{
+	int timeout = 500000; /* 500 msec */
+	int send = (command >> 12) & 0xf;
+	int receive = (command >> 8) & 0xf;
+	int i;
+
+	psmouse->cmdcnt = receive;
+
+	if (command & 0xff)
+		if (psmouse_sendbyte(psmouse, command & 0xff))
+			return (psmouse->cmdcnt = 0) - 1;
+
+	for (i = 0; i < send; i++)
+		if (psmouse_sendbyte(psmouse, param[i]))
+			return (psmouse->cmdcnt = 0) - 1;
+
+	while (psmouse->cmdcnt && timeout--) udelay(1);
+
+	for (i = 0; i < receive; i++)
+		param[i] = psmouse->cmdbuf[(receive - 1) - i];
+
+	if (psmouse->cmdcnt) 
+		return (psmouse->cmdcnt = 0) - 1;
+
+	return 0;
+}
+
+/*
+ * psmouse_ps2pp_cmd() sends a PS2++ command, sliced into two bit
+ * pieces through the SETRES command. This is needed to send extended
+ * commands to mice on notebooks that try to understand the PS/2 protocol
+ * Ugly.
+ */
+
+static int psmouse_ps2pp_cmd(struct psmouse *psmouse, unsigned char *param, unsigned char command)
+{
+	unsigned char d;
+	int i;
+
+	if (psmouse_command(psmouse,  NULL, PSMOUSE_CMD_SETSCALE11))
+		return -1;
+
+	for (i = 6; i >= 0; i -= 2) {
+		d = (command >> i) & 3;
+		if(psmouse_command(psmouse, &d, PSMOUSE_CMD_SETRES))
+			return -1;
+	}
+
+	if (psmouse_command(psmouse, param, PSMOUSE_CMD_POLL))
+		return -1;
+
+	return 0;
+}
+
+/*
+ * psmouse_extensions() probes for any extensions to the basic PS/2 protocol
+ * the mouse may have.
+ */
+
+static int psmouse_extensions(struct psmouse *psmouse)
+{
+	unsigned char param[4];
+
+	param[0] = 0;
+	psmouse->vendor = "Generic";
+	psmouse->name = "Mouse";
+
+/*
+ * Try Genius NetMouse magic init.
+ */
+
+	param[0] = 3;
+	psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
+	psmouse_command(psmouse,  NULL, PSMOUSE_CMD_SETSCALE11);
+	psmouse_command(psmouse,  NULL, PSMOUSE_CMD_SETSCALE11);
+	psmouse_command(psmouse,  NULL, PSMOUSE_CMD_SETSCALE11);
+	psmouse_command(psmouse, param, PSMOUSE_CMD_GETINFO);
+
+	if (param[0] == 0x00 && param[1] == 0x33 && param[2] == 0x55) {
+		psmouse->vendor = "Genius";
+		psmouse->name = "Mouse";
+
+		set_bit(BTN_EXTRA, psmouse->dev.keybit);
+		set_bit(BTN_SIDE, psmouse->dev.keybit);
+		set_bit(REL_WHEEL, psmouse->dev.relbit);
+
+		return PSMOUSE_GENPS;
+	}
+
+/*
+ * Try Logitech magic ID.
+ */
+
+	param[0] = 0;
+	psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
+	psmouse_command(psmouse,  NULL, PSMOUSE_CMD_SETSCALE11);
+	psmouse_command(psmouse,  NULL, PSMOUSE_CMD_SETSCALE11);
+	psmouse_command(psmouse,  NULL, PSMOUSE_CMD_SETSCALE11);
+	psmouse_command(psmouse, param, PSMOUSE_CMD_GETINFO);
+
+	if (param[1]) {
+
+		int i;
+		static int logitech_4btn[] = { 12, 40, 41, 42, 43, 73, 80, -1 };
+		static int logitech_wheel[] = { 75, 76, 80, 81, 83, 88, -1 };
+		static int logitech_ps2pp[] = { 12, 13, 40, 41, 42, 43, 50, 51, 52, 53, 73, 75,
+							76, 80, 81, 83, 88, 96, 97, -1 };
+
+		int devicetype = ((param[0] >> 4) & 0x07) | ((param[0] << 3) & 0x78);
+
+		psmouse->vendor = "Logitech";
+		psmouse->name = "Mouse";
+
+		if (param[1] < 3)
+			clear_bit(BTN_MIDDLE, psmouse->dev.keybit);
+		if (param[1] < 2)
+			clear_bit(BTN_RIGHT, psmouse->dev.keybit);
+
+		psmouse->type = PSMOUSE_PS2;
+
+		for (i = 0; logitech_ps2pp[i] != -1; i++)
+			if (logitech_ps2pp[i] == devicetype) psmouse->type = PSMOUSE_PS2PP;
+
+		if (psmouse->type != PSMOUSE_PS2PP) return PSMOUSE_PS2;
+
+		for (i = 0; logitech_4btn[i] != -1; i++)
+			if (logitech_4btn[i] == devicetype) set_bit(BTN_SIDE, psmouse->dev.keybit);
+
+		for (i = 0; logitech_wheel[i] != -1; i++)
+			if (logitech_wheel[i] == devicetype) set_bit(REL_WHEEL, psmouse->dev.relbit);
+
+/*
+ * Do Logitech PS2++ / PS2T++ magic init.
+ */
+
+		if (devicetype == 97) { /* TouchPad 3 */
+
+			set_bit(REL_WHEEL, psmouse->dev.relbit);
+			set_bit(REL_HWHEEL, psmouse->dev.relbit);
+
+			param[0] = 0x11; param[1] = 0x04; param[2] = 0x68; /* Unprotect RAM */
+			psmouse_command(psmouse, param, 0x30d1);
+			param[0] = 0x11; param[1] = 0x05; param[2] = 0x0b; /* Enable features */
+			psmouse_command(psmouse, param, 0x30d1);
+			param[0] = 0x11; param[1] = 0x09; param[2] = 0xc3; /* Enable PS2++ */
+			psmouse_command(psmouse, param, 0x30d1);
+
+			param[0] = 0;
+			if (!psmouse_command(psmouse, param, 0x13d1) &&
+				param[0] == 0x06 && param[1] == 0x00 && param[2] == 0x14)
+				return PSMOUSE_PS2TPP;
+
+		} else {
+			psmouse_ps2pp_cmd(psmouse, param, 0x39); /* Magic knock */
+			psmouse_ps2pp_cmd(psmouse, param, 0xDB);
+
+			if ((param[0] & 0x78) == 0x48 && (param[1] & 0xf3) == 0xc2 &&
+				(param[2] & 3) == ((param[1] >> 2) & 3))
+					return PSMOUSE_PS2PP;
+		}
+
+	}
+
+/*
+ * Try IntelliMouse magic init.
+ */
+
+	param[0] = 200;
+	psmouse_command(psmouse, param, PSMOUSE_CMD_SETRATE);
+	param[0] = 100;
+	psmouse_command(psmouse, param, PSMOUSE_CMD_SETRATE);
+	param[0] =  80;
+	psmouse_command(psmouse, param, PSMOUSE_CMD_SETRATE);
+	psmouse_command(psmouse, param, PSMOUSE_CMD_GETID);
+	
+	if (param[0] == 3) {
+
+		set_bit(REL_WHEEL, psmouse->dev.relbit);
+
+/*
+ * Try IntelliMouse Explorer magic init.
+ */
+
+		param[0] = 200;
+		psmouse_command(psmouse, param, PSMOUSE_CMD_SETRATE);
+		param[0] = 200;
+		psmouse_command(psmouse, param, PSMOUSE_CMD_SETRATE);
+		param[0] =  80;
+		psmouse_command(psmouse, param, PSMOUSE_CMD_SETRATE);
+		psmouse_command(psmouse, param, PSMOUSE_CMD_GETID);
+
+		if (param[0] == 4) {
+
+			psmouse->vendor = "Microsoft";
+			psmouse->name = "IntelliMouse Explorer";
+
+			set_bit(BTN_SIDE, psmouse->dev.keybit);
+			set_bit(BTN_EXTRA, psmouse->dev.keybit);
+
+			return PSMOUSE_IMEX;
+		}
+
+		psmouse->vendor = "Microsoft";
+		psmouse->name = "IntelliMouse";
+
+		return PSMOUSE_IMPS;
+	}
+
+/*
+ * Okay, all failed, we have a standard mouse here. The number of the buttons is
+ * still a question, though.
+ */
+
+	psmouse->vendor = "Generic";
+	psmouse->name = "Mouse";
+
+	return PSMOUSE_PS2;
+}
+
+/*
+ * psmouse_probe() probes for a PS/2 mouse.
+ */
+
+static int psmouse_probe(struct psmouse *psmouse)
+{
+	unsigned char param[2];
+
+/*
+ * First we reset and disable the mouse.
+ */
+
+	if (psmouse_command(psmouse, NULL, PSMOUSE_CMD_RESET_DIS))
+		return -1;
+
+/*
+ * Next, we check if it's a mouse. It should send 0x00 or 0x03
+ * in case of an IntelliMouse in 4-byte mode or 0x04 for IM Explorer.
+ */
+
+	param[0] = param[1] = 0xa5;
+
+	if (psmouse_command(psmouse, param, PSMOUSE_CMD_GETID))
+		return -1;
+
+	if (param[0] != 0x00 && param[0] != 0x03 && param[0] != 0x04)
+		return -1;
+
+/*
+ * And here we try to determine if it has any extensions over the
+ * basic PS/2 3-button mouse.
+ */
+
+	return psmouse->type = psmouse_extensions(psmouse);
+}
+
+/*
+ * psmouse_initialize() initializes the mouse to a sane state.
+ */
+
+static void psmouse_initialize(struct psmouse *psmouse)
+{
+	unsigned char param[2];
+
+/*
+ * We set the mouse report rate to a highest possible value.
+ * We try 100 first in case mouse fails to set 200.
+ */
+
+	param[0] = 100;
+	psmouse_command(psmouse, param, PSMOUSE_CMD_SETRATE);
+
+	param[0] = 200;
+	psmouse_command(psmouse, param, PSMOUSE_CMD_SETRATE);
+
+/*
+ * We also set the resolution and scaling.
+ */
+
+	param[0] = 3;
+	psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
+	psmouse_command(psmouse,  NULL, PSMOUSE_CMD_SETSCALE11);
+
+/*
+ * We set the mouse into streaming mode.
+ */
+
+	psmouse_command(psmouse, param, PSMOUSE_CMD_SETSTREAM);
+
+/*
+ * Last, we enable the mouse so that we get reports from it.
+ */
+
+	if (psmouse_command(psmouse, NULL, PSMOUSE_CMD_ENABLE)) {
+		printk(KERN_WARNING "psmouse.c: Failed to enable mouse on %s\n", psmouse->serio->phys);
+	}
+
+}
+
+/*
+ * psmouse_disconnect() cleans up after we don't want talk
+ * to the mouse anymore.
+ */
+
+static void psmouse_disconnect(struct serio *serio)
+{
+	struct psmouse *psmouse = serio->private;
+	input_unregister_device(&psmouse->dev);
+	serio_close(serio);
+	kfree(psmouse);
+}
+
+/*
+ * psmouse_powerup() is called when we get the powerup
+ * sequence - 0xaa [0x00], so that the mouse/kbd is re-probed.
+ */
+
+static void psmouse_powerup(void *data)
+{
+        struct psmouse *psmouse = data;
+
+	if (psmouse->packet[0] == PSMOUSE_RET_BAT && (psmouse->pktcnt == 1 ||
+	   (psmouse->pktcnt == 2 && psmouse->packet[1] == 0x00))) {
+		mdelay(40); /* FIXME!!! Wait some nicer way */
+		serio_rescan(psmouse->serio);
+	}
+}
+
+/*
+ * psmouse_connect() is a callback form the serio module when
+ * an unhandled serio port is found.
+ */
+
+static void psmouse_connect(struct serio *serio, struct serio_dev *dev)
+{
+	struct psmouse *psmouse;
+	
+	if ((serio->type & SERIO_TYPE) != SERIO_8042)
+		return;
+
+	if (!(psmouse = kmalloc(sizeof(struct psmouse), GFP_KERNEL)))
+		return;
+
+	memset(psmouse, 0, sizeof(struct psmouse));
+
+	psmouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+	psmouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+	psmouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
+
+	psmouse->serio = serio;
+	psmouse->dev.private = psmouse;
+	psmouse->tq.routine = psmouse_powerup;
+	psmouse->tq.data = psmouse;
+
+	serio->private = psmouse;
+
+	if (serio_open(serio, dev)) {
+		kfree(psmouse);
+		return;
+	}
+
+	if (psmouse_probe(psmouse) <= 0) {
+		serio_close(serio);
+		kfree(psmouse);
+		return;
+	}
+	
+	sprintf(psmouse->devname, "%s %s %s",
+		psmouse_protocols[psmouse->type], psmouse->vendor, psmouse->name);
+	sprintf(psmouse->phys, "%s/input0",
+		serio->phys);
+
+	psmouse->dev.name = psmouse->devname;
+	psmouse->dev.phys = psmouse->phys;
+	psmouse->dev.idbus = BUS_I8042;
+	psmouse->dev.idvendor = psmouse->type;
+	psmouse->dev.idproduct = 0x0002;
+	psmouse->dev.idversion = 0x0100;
+
+	input_register_device(&psmouse->dev);
+	
+	printk(KERN_INFO "input: %s on %s\n", psmouse->devname, serio->phys);
+
+	psmouse_initialize(psmouse);
+}
+
+static struct serio_dev psmouse_dev = {
+	interrupt:	psmouse_interrupt,
+	connect:	psmouse_connect,
+	disconnect:	psmouse_disconnect
+};
+
+int __init psmouse_init(void)
+{
+	serio_register_device(&psmouse_dev);
+	return 0;
+}
+
+void __exit psmouse_exit(void)
+{
+	serio_unregister_device(&psmouse_dev);
+}
+
+module_init(psmouse_init);
+module_exit(psmouse_exit);

drivers/input/mouse/rpcmouse.c

+/*
+ * $Id: rpcmouse.c,v 1.11 2001/09/25 10:12:07 vojtech Exp $
+ *
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ *
+ *  Based on the work of:
+ *      Russel King
+ */
+
+/*
+ * Acorn RiscPC mouse driver for Linux/ARM
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/iomd.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Acorn RiscPC mouse driver");
+MODULE_LICENSE("GPL");
+
+#define IOMD_MOUSEBTN	0x800C4000
+
+static short rpcmouse_lastx, rpcmouse_lasty;
+
+static struct input_dev rpcmouse_dev = {
+	evbit:		{ BIT(EV_KEY) | BIT(EV_REL) },
+	keybit: 	{ [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) },
+	relbit:		{ BIT(REL_X) | BIT(REL_Y) },
+	name:		"Acorn RiscPC Mouse",
+	phys:		"rpcmouse/input0",
+	idbus:		BUS_ISA,
+	idvendor:	0x0005,
+	idproduct:	0x0001,
+	idversion:	0x0100,
+};
+
+static void rpcmouse_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+	short x, y, dx, dy, b;
+
+	x = (short) inl(IOMD_MOUSEX);
+	y = (short) inl(IOMD_MOUSEY);
+	b = (short) inl(IOMD_MOUSEBTN);
+
+	dx = x - rpcmouse_lastx;
+	dy = y - rpcmouse_lasty; 
+
+	rpcmouse_lastx = x;
+	rpcmouse_lasty = y;
+
+	input_report_rel(&rpcmouse_dev, REL_X, dx);
+	input_report_rel(&rpcmouse_dev, REL_Y, dy);
+
+	input_report_key(&amimouse_dev, BTN_LEFT,   buttons & 0x10);
+	input_report_key(&amimouse_dev, BTN_MIDDLE, buttons & 0x20);
+	input_report_key(&amimouse_dev, BTN_RIGHT,  buttons & 0x40);
+}
+
+static int __init rpcmouse_init(void)
+{
+	rpcmouse_lastx = (short) inl(IOMD_MOUSEX);
+	rpcmouse_lasty = (short) inl(IOMD_MOUSEY);
+
+	if (request_irq(IRQ_VSYNCPULSE, rpcmouse_irq, SA_SHIRQ, "rpcmouse", NULL)) {
+		printk(KERN_ERR "rpcmouse: unable to allocate VSYNC interrupt\n");
+		return -1;
+	}
+
+	input_register_device(&rpcmouse_dev);
+	printk(KERN_INFO "input%d: Acorn RiscPC mouse irq %d", IRQ_VSYNCPULSE);
+
+	return 0;
+}
+
+static void __exit rpcmouse_exit(void)
+{
+	input_unregister_device(&rpcmouse_dev);
+	free_irq(IRQ_VSYNCPULSE, NULL);
+}
+
+module_init(rpcmouse_init);
+module_exit(rpcmouse_exit);

drivers/input/mouse/sermouse.c

+/*
+ * $Id: sermouse.c,v 1.17 2002/03/13 10:03:43 vojtech Exp $
+ *
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ */
+
+/*
+ *  Serial mouse driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/config.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Serial mouse driver");
+MODULE_LICENSE("GPL");
+
+static char *sermouse_protocols[] = { "None", "Mouse Systems Mouse", "Sun Mouse", "Microsoft Mouse",
+					"Logitech M+ Mouse", "Microsoft MZ Mouse", "Logitech MZ+ Mouse",
+					"Logitech MZ++ Mouse"};
+
+struct sermouse {
+	struct input_dev dev;
+	signed char buf[8];
+	unsigned char count;
+	unsigned char type;
+	unsigned long last;
+	char phys[32];
+};
+
+/*
+ * sermouse_process_msc() analyzes the incoming MSC/Sun bytestream and
+ * applies some prediction to the data, resulting in 96 updates per
+ * second, which is as good as a PS/2 or USB mouse.
+ */
+
+static void sermouse_process_msc(struct sermouse *sermouse, signed char data)
+{
+	struct input_dev *dev = &sermouse->dev;
+	signed char *buf = sermouse->buf;
+
+	switch (sermouse->count) {
+
+		case 0:
+			if ((data & 0xf8) != 0x80) return;
+			input_report_key(dev, BTN_LEFT,   !(data & 4)); 
+			input_report_key(dev, BTN_RIGHT,  !(data & 1));
+			input_report_key(dev, BTN_MIDDLE, !(data & 2));
+			break;
+
+		case 1: 
+		case 3: 
+			input_report_rel(dev, REL_X, data / 2);
+			input_report_rel(dev, REL_Y, -buf[1]);
+			buf[0] = data - data / 2;
+			break;
+
+		case 2: 
+		case 4:
+			input_report_rel(dev, REL_X, buf[0]);
+			input_report_rel(dev, REL_Y, buf[1] - data);
+			buf[1] = data / 2;
+			break;
+	}
+
+	if (++sermouse->count == (5 - ((sermouse->type == SERIO_SUN) << 1)))
+		sermouse->count = 0;
+}
+
+/*
+ * sermouse_process_ms() anlyzes the incoming MS(Z/+/++) bytestream and
+ * generates events. With prediction it gets 80 updates/sec, assuming
+ * standard 3-byte packets and 1200 bps.
+ */
+
+static void sermouse_process_ms(struct sermouse *sermouse, signed char data)
+{
+	struct input_dev *dev = &sermouse->dev;
+	signed char *buf = sermouse->buf;
+
+	if (data & 0x40) sermouse->count = 0;
+
+	switch (sermouse->count) {
+
+		case 0:
+			buf[1] = data;
+			input_report_key(dev, BTN_LEFT,   (data >> 5) & 1);
+			input_report_key(dev, BTN_RIGHT,  (data >> 4) & 1);
+			break;
+
+		case 1:
+			buf[2] = data;
+			data = (signed char) (((buf[1] << 6) & 0xc0) | (data & 0x3f));
+			input_report_rel(dev, REL_X, data / 2);
+			input_report_rel(dev, REL_Y, buf[4]);
+			buf[3] = data - data / 2;
+			break;
+
+		case 2:
+			/* Guessing the state of the middle button on 3-button MS-protocol mice - ugly. */
+			if ((sermouse->type == SERIO_MS) && !data && !buf[2] && !((buf[0] & 0xf0) ^ buf[1]))
+				input_report_key(dev, BTN_MIDDLE, !test_bit(BTN_MIDDLE, dev->key));
+			buf[0] = buf[1];
+
+			data = (signed char) (((buf[1] << 4) & 0xc0) | (data & 0x3f));
+			input_report_rel(dev, REL_X, buf[3]);
+			input_report_rel(dev, REL_Y, data - buf[4]);
+			buf[4] = data / 2;
+			break;
+
+		case 3:
+
+			switch (sermouse->type) {
+			
+				case SERIO_MS:
+					 sermouse->type = SERIO_MP;
+
+				case SERIO_MP:
+					if ((data >> 2) & 3) break;	/* M++ Wireless Extension packet. */
+					input_report_key(dev, BTN_MIDDLE, (data >> 5) & 1);
+					input_report_key(dev, BTN_SIDE,   (data >> 4) & 1);
+					break;
+
+				case SERIO_MZP:
+				case SERIO_MZPP:
+					input_report_key(dev, BTN_SIDE,   (data >> 5) & 1);
+
+				case SERIO_MZ:
+					input_report_key(dev, BTN_MIDDLE, (data >> 4) & 1);
+					input_report_rel(dev, REL_WHEEL, (data & 7) - (data & 8));
+					break;
+			}
+					
+			break;
+
+		case 4:
+		case 6:	/* MZ++ packet type. We can get these bytes for M++ too but we ignore them later. */
+			buf[1] = (data >> 2) & 0x0f;
+			break;
+
+		case 5:
+		case 7: /* Ignore anything besides MZ++ */
+			if (sermouse->type != SERIO_MZPP) break;
+
+			switch (buf[1]) {
+
+				case 1: /* Extra mouse info */
+
+					input_report_key(dev, BTN_SIDE, (data >> 4) & 1);
+					input_report_key(dev, BTN_EXTRA, (data >> 5) & 1);
+					input_report_rel(dev, data & 0x80 ? REL_HWHEEL : REL_WHEEL, (data & 7) - (data & 8));
+
+					break;
+
+				default: /* We don't decode anything else yet. */
+
+					printk(KERN_WARNING
+						"sermouse.c: Received MZ++ packet %x, don't know how to handle.\n", buf[1]);
+					break;
+			}
+
+			break;
+	}
+
+	sermouse->count++;
+}
+
+/*
+ * sermouse_interrupt() handles incoming characters, either gathering them into
+ * packets or passing them to the command routine as command output.
+ */
+
+static void sermouse_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
+{
+	struct sermouse *sermouse = serio->private;
+
+	if (time_after(jiffies, sermouse->last + HZ/20)) sermouse->count = 0;
+	sermouse->last = jiffies;
+
+	if (sermouse->type > SERIO_SUN)
+		sermouse_process_ms(sermouse, data);
+	else
+		sermouse_process_msc(sermouse, data);
+}
+
+/*
+ * sermouse_disconnect() cleans up after we don't want talk
+ * to the mouse anymore.
+ */
+
+static void sermouse_disconnect(struct serio *serio)
+{
+	struct sermouse *sermouse = serio->private;
+	input_unregister_device(&sermouse->dev);
+	serio_close(serio);
+	kfree(sermouse);
+}
+
+/*
+ * sermouse_connect() is a callback form the serio module when
+ * an unhandled serio port is found.
+ */
+
+static void sermouse_connect(struct serio *serio, struct serio_dev *dev)
+{
+	struct sermouse *sermouse;
+	unsigned char c;
+	
+	if ((serio->type & SERIO_TYPE) != SERIO_RS232)
+		return;
+
+	if (!(serio->type & SERIO_PROTO) || ((serio->type & SERIO_PROTO) > SERIO_MZPP))
+		return;
+
+	if (!(sermouse = kmalloc(sizeof(struct sermouse), GFP_KERNEL)))
+		return;
+
+	memset(sermouse, 0, sizeof(struct sermouse));
+
+	sermouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+	sermouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT);
+	sermouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
+	sermouse->dev.private = sermouse;
+
+	serio->private = sermouse;
+
+	sermouse->type = serio->type & SERIO_PROTO;
+	c = (serio->type & SERIO_EXTRA) >> 16;
+
+	if (c & 0x01) set_bit(BTN_MIDDLE, sermouse->dev.keybit);
+	if (c & 0x02) set_bit(BTN_SIDE, sermouse->dev.keybit);
+	if (c & 0x04) set_bit(BTN_EXTRA, sermouse->dev.keybit);
+	if (c & 0x10) set_bit(REL_WHEEL, sermouse->dev.relbit);
+	if (c & 0x20) set_bit(REL_HWHEEL, sermouse->dev.relbit);
+
+	sprintf(sermouse->phys, "%s/input0", serio->phys);
+
+	sermouse->dev.name = sermouse_protocols[sermouse->type];
+	sermouse->dev.phys = sermouse->phys;
+	sermouse->dev.idbus = BUS_RS232;
+	sermouse->dev.idvendor = sermouse->type;
+	sermouse->dev.idproduct = c;
+	sermouse->dev.idversion = 0x0100;
+
+	if (serio_open(serio, dev)) {
+		kfree(sermouse);
+		return;
+	}
+
+	input_register_device(&sermouse->dev);
+	
+	printk(KERN_INFO "input: %s on %s\n", sermouse_protocols[sermouse->type], serio->phys);
+}
+
+static struct serio_dev sermouse_dev = {
+	interrupt:	sermouse_interrupt,
+	connect:	sermouse_connect,
+	disconnect:	sermouse_disconnect
+};
+
+int __init sermouse_init(void)
+{
+	serio_register_device(&sermouse_dev);
+	return 0;
+}
+
+void __exit sermouse_exit(void)
+{
+	serio_unregister_device(&sermouse_dev);
+}
+
+module_init(sermouse_init);
+module_exit(sermouse_exit);

drivers/input/mousedev.c

 /*
- * $Id: mousedev.c,v 1.38 2001/12/26 21:08:33 jsimmons Exp $
+ * $Id: mousedev.c,v 1.42 2002/04/09 20:51:26 jdeneux Exp $
  *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  *
@@ -38,6 +38,10 @@
 #include <linux/config.h>
 #include <linux/smp_lock.h>
 #include <linux/random.h>
+#include <linux/major.h>
+#ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
+#include <linux/miscdevice.h>
+#endif
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION("Mouse (ExplorerPS/2) device interfaces");
@@ -225,7 +229,14 @@ static int mousedev_release(struct inode * inode, struct file * file)
 static int mousedev_open(struct inode * inode, struct file * file)
 {
 	struct mousedev_list *list;
-	int i = minor(inode->i_rdev) - MOUSEDEV_MINOR_BASE;
+	int i;
+
+#ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
+	if (major(inode->i_rdev) == MISC_MAJOR)
+		i = MOUSEDEV_MIX;
+	else
+#endif
+		i = minor(inode->i_rdev) - MOUSEDEV_MINOR_BASE;
 
 	if (i >= MOUSEDEV_MINORS || !mousedev_table[i])
 		return -ENODEV;
@@ -494,6 +505,12 @@ static struct input_handler mousedev_handler = {
 	id_table:	mousedev_ids,
 };
 
+#ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
+static struct miscdevice psaux_mouse = {
+	PSMOUSE_MINOR, "psaux", &mousedev_fops
+};
+#endif
+
 static int __init mousedev_init(void)
 {
 	input_register_handler(&mousedev_handler);
@@ -504,6 +521,9 @@ static int __init mousedev_init(void)
 	mousedev_mix.exist = 1;
 	mousedev_mix.minor = MOUSEDEV_MIX;
 	mousedev_mix.devfs = input_register_minor("mice", MOUSEDEV_MIX, MOUSEDEV_MINOR_BASE);
+#ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
+	misc_register(&psaux_mouse);
+#endif
 
 	printk(KERN_INFO "mice: PS/2 mouse device common for all mice\n");
 
@@ -512,6 +532,9 @@ static int __init mousedev_init(void)
 
 static void __exit mousedev_exit(void)
 {
+#ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
+	misc_deregister(&psaux_mouse);
+#endif
 	input_unregister_minor(mousedev_mix.devfs);
 	input_unregister_handler(&mousedev_handler);
 }

drivers/input/power.c

+/*
+ * $Id: power.c,v 1.10 2001/09/25 09:17:15 vojtech Exp $
+ *
+ *  Copyright (c) 2001 "Crazy" James Simmons  
+ *
+ *  Input driver Power Management.
+ *
+ *  Sponsored by Transvirtual Technology.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <jsimmons@transvirtual.com>.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+
+static struct input_handler power_handler;
+
+/*
+ * Power management can't be done in a interrupt context. So we have to
+ * use keventd.
+ */
+static int suspend_button_pushed = 0;
+static void suspend_button_task_handler(void *data)
+{
+        //extern void pm_do_suspend(void);
+        udelay(200); /* debounce */
+        //pm_do_suspend();
+        suspend_button_pushed = 0;
+}
+
+static struct tq_struct suspend_button_task = {
+        routine: suspend_button_task_handler
+};
+
+static void power_event(struct input_handle *handle, unsigned int type, 
+		        unsigned int code, int down)
+{
+	struct input_dev *dev = handle->dev;
+
+	printk("Entering power_event\n");
+
+	if (type != EV_KEY || type != EV_PWR) return;
+
+	if (type == EV_PWR) {
+		switch (code) {
+			case KEY_SUSPEND:
+				printk("Powering down entire device\n");
+
+				//pm_send_all(PM_SUSPEND, dev);
+
+				if (!suspend_button_pushed) {
+                			suspend_button_pushed = 1;
+                        		schedule_task(&suspend_button_task);
+                		}
+				break;
+			case KEY_POWER:
+				/* Hum power down the machine. */
+				break;
+			default:	
+				return;
+		}
+	} else {
+		switch (code) {
+			case KEY_SUSPEND:
+				printk("Powering down input device\n");
+				/* This is risky. See pm.h for details. */
+				if (dev->state != PM_RESUME)
+					dev->state = PM_RESUME;
+				else 
+					dev->state = PM_SUSPEND;	
+				pm_send(dev->pm_dev, dev->state, dev); 	
+				break;
+			case KEY_POWER:
+				/* Turn the input device off completely ? */
+				break;
+			default:
+				return;
+		}
+	}
+	return;
+}
+
+static struct input_handle *power_connect(struct input_handler *handler, 
+					  struct input_dev *dev, 
+					  struct input_device_id *id)
+{
+	struct input_handle *handle;
+
+	if (!test_bit(EV_KEY, dev->evbit) || !test_bit(EV_PWR, dev->evbit))
+		return NULL;	
+
+	if (!test_bit(KEY_SUSPEND, dev->keybit) || (!test_bit(KEY_POWER, dev->keybit)))
+		return NULL;
+
+	if (!(handle = kmalloc(sizeof(struct input_handle), GFP_KERNEL)))
+		return NULL;
+	memset(handle, 0, sizeof(struct input_handle));
+
+	handle->dev = dev;
+	handle->handler = handler;
+
+	input_open_device(handle);
+
+	printk(KERN_INFO "power.c: Adding power management to input layer\n");
+	return handle;
+}
+
+static void power_disconnect(struct input_handle *handle)
+{
+	input_close_device(handle);
+	kfree(handle);
+}
+
+static struct input_device_id power_ids[] = {
+	{
+		flags: INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
+		evbit: { BIT(EV_KEY) },
+		keybit: { [LONG(KEY_SUSPEND)] = BIT(KEY_SUSPEND) }
+	},	
+	{
+		flags: INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
+		evbit: { BIT(EV_KEY) },
+		keybit: { [LONG(KEY_POWER)] = BIT(KEY_POWER) }
+	},	
+	{
+		flags: INPUT_DEVICE_ID_MATCH_EVBIT,
+		evbit: { BIT(EV_PWR) },
+	},	
+	{ }, 	/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(input, power_ids);
+	
+static struct input_handler power_handler = {
+	event:		power_event,
+	connect:	power_connect,
+	disconnect:	power_disconnect,
+	name:		"power",
+	id_table:	power_ids,
+};
+
+static int __init power_init(void)
+{
+	input_register_handler(&power_handler);
+	return 0;
+}
+
+static void __exit power_exit(void)
+{
+	input_unregister_handler(&power_handler);
+}
+
+module_init(power_init);
+module_exit(power_exit);
+
+MODULE_AUTHOR("James Simmons <jsimmons@transvirtual.com>");
+MODULE_DESCRIPTION("Input Power Management driver");

drivers/input/serio/Config.help

@@ -12,6 +12,18 @@ CONFIG_SERIO
   The module will be called serio.o. If you want to compile it
   as a module, say M here and read <file:Documentation/modules.txt>.
 
+CONFIG_SERIO_I8042
+  i8042 is the chip over which the standard AT keyboard and PS/2
+  mouse are connected to the computer. If you use these devices,
+  you'll need to say Y here.
+
+  If unsure, say Y.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called i8042.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
 CONFIG_SERIO_SERPORT
   Say Y here if you plan to use an input device (mouse, joystick,
   tablet, 6dof) that communicates over the RS232 serial (COM) port.
@@ -24,3 +36,38 @@ CONFIG_SERIO_SERPORT
   inserted in and removed from the running kernel whenever you want).
   The module will be called serport.o. If you want to compile it as a
   module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SERIO_CT82C710
+  Say Y here if you have a Texas Instruments TravelMate notebook
+  equipped with the ct82c710 chip and want to use a mouse connected
+  to the "QuickPort".
+
+  If unsure, say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ct82c710.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SERIO_PARKBD
+  Say Y here if you built a simple parallel port adapter to attach
+  an additional AT keyboard, XT keyboard or PS/2 mouse.
+
+  More information is available: <file:Documentation/input/input.txt>
+
+  If unsure, say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called parkbd.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SERIO_ACORN
+  Say Y here if you have the Acorn RiscPC and want to use an AT
+  keyboard connected to its keyboard controller.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called rpckbd.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+

drivers/input/serio/Config.in

@@ -4,4 +4,16 @@
 
 tristate 'Serial i/o support' CONFIG_SERIO
 
+dep_tristate '  i8042 PC Keyboard controller' CONFIG_SERIO_I8042 $CONFIG_SERIO $CONFIG_ISA
+if [ "$CONFIG_SERIO_I8042" != "n" ]; then
+   hex '    Register Base Address' CONFIG_I8042_REG_BASE 60
+   int '    PS/2 Keyboard IRQ' CONFIG_I8042_KBD_IRQ 1
+   int '    PS/2 AUX IRQ' CONFIG_I8042_AUX_IRQ 12
+fi
 dep_tristate '  Serial port line discipline' CONFIG_SERIO_SERPORT $CONFIG_SERIO 
+dep_tristate '  ct82c710 Aux port controller' CONFIG_SERIO_CT82C710 $CONFIG_SERIO $CONFIG_ISA
+dep_tristate '  Parallel port keyboard adapter' CONFIG_SERIO_PARKBD $CONFIG_SERIO $CONFIG_PARPORT
+
+if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
+   dep_tristate '  Acorn RiscPC keyboard controller' CONFIG_SERIO_ACORN $CONFIG_SERIO
+fi

drivers/input/serio/Makefile

@@ -9,7 +9,11 @@ export-objs	:= serio.o
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_SERIO)		+= serio.o
+obj-$(CONFIG_SERIO_I8042)	+= i8042.o
+obj-$(CONFIG_SERIO_PARKBD)	+= parkbd.o
 obj-$(CONFIG_SERIO_SERPORT)	+= serport.o
+obj-$(CONFIG_SERIO_CT82C710)	+= ct82c710.o
+obj-$(CONFIG_SERIO_RPCKBD)	+= rpckbd.o
 
 # The global Rules.make.
 

drivers/input/serio/ct82c710.c

+/*
+ * $Id: ct82c710.c,v 1.11 2001/09/25 10:12:07 vojtech Exp $
+ *
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ */
+
+/*
+ *  82C710 C&T mouse port chip driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <asm/io.h>
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("82C710 C&T mouse port chip driver");
+MODULE_LICENSE("GPL");
+
+static char ct82c710_name[] = "C&T 82c710 mouse port";
+static char ct82c710_phys[16];
+
+/*
+ * ct82c710 interface
+ */
+
+#define CT82C710_DEV_IDLE     0x01		/* Device Idle */
+#define CT82C710_RX_FULL      0x02		/* Device Char received */
+#define CT82C710_TX_IDLE      0x04		/* Device XMIT Idle */
+#define CT82C710_RESET        0x08		/* Device Reset */
+#define CT82C710_INTS_ON      0x10		/* Device Interrupt On */
+#define CT82C710_ERROR_FLAG   0x20		/* Device Error */
+#define CT82C710_CLEAR        0x40		/* Device Clear */
+#define CT82C710_ENABLE       0x80		/* Device Enable */
+
+#define CT82C710_IRQ          12
+
+static int ct82c710_data = 0;
+static int ct82c710_status = 0;
+
+static void ct82c710_interrupt(int cpl, void *dev_id, struct pt_regs * regs);
+
+/*
+ * Wait for device to send output char and flush any input char.
+ */
+
+static int ct82c170_wait(void)
+{
+	int timeout = 60000;
+
+	while ((inb(ct82c710_status) & (CT82C710_RX_FULL | CT82C710_TX_IDLE | CT82C710_DEV_IDLE))
+		       != (CT82C710_DEV_IDLE | CT82C710_TX_IDLE) && timeout) {
+
+		if (inb_p(ct82c710_status) & CT82C710_RX_FULL) inb_p(ct82c710_data);
+
+		udelay(1);
+		timeout--;
+	}
+
+	return !timeout;
+}
+
+static void ct82c710_close(struct serio *serio)
+{
+	if (ct82c170_wait())
+		printk(KERN_WARNING "ct82c710.c: Device busy in close()\n");
+
+	outb_p(inb_p(ct82c710_status) & ~(CT82C710_ENABLE | CT82C710_INTS_ON), ct82c710_status);
+
+	if (ct82c170_wait())
+		printk(KERN_WARNING "ct82c710.c: Device busy in close()\n");
+
+	free_irq(CT82C710_IRQ, NULL);
+}
+
+static int ct82c710_open(struct serio *serio)
+{
+	unsigned char status;
+
+	if (request_irq(CT82C710_IRQ, ct82c710_interrupt, 0, "ct82c710", NULL))
+		return -1;
+
+	status = inb_p(ct82c710_status);
+
+	status |= (CT82C710_ENABLE | CT82C710_RESET);
+	outb_p(status, ct82c710_status);
+
+	status &= ~(CT82C710_RESET);
+	outb_p(status, ct82c710_status);
+
+	status |= CT82C710_INTS_ON;
+	outb_p(status, ct82c710_status);	/* Enable interrupts */
+
+	while (ct82c170_wait()) {
+		printk(KERN_ERR "ct82c710: Device busy in open()\n");
+		status &= ~(CT82C710_ENABLE | CT82C710_INTS_ON);
+		outb_p(status, ct82c710_status);
+		free_irq(CT82C710_IRQ, NULL);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Write to the 82C710 mouse device.
+ */
+
+static int ct82c710_write(struct serio *port, unsigned char c)
+{
+	if (ct82c170_wait()) return -1;
+	outb_p(c, ct82c710_data);
+	return 0;
+}
+
+static struct serio ct82c710_port =
+{
+	type:	SERIO_8042,
+	name:	ct82c710_name,
+	phys:	ct82c710_phys,
+	write:	ct82c710_write,
+	open:	ct82c710_open,
+	close:	ct82c710_close,
+};
+
+/*
+ * Interrupt handler for the 82C710 mouse port. A character
+ * is waiting in the 82C710.
+ */
+
+static void ct82c710_interrupt(int cpl, void *dev_id, struct pt_regs * regs)
+{
+	if (ct82c710_port.dev)
+		ct82c710_port.dev->interrupt(&ct82c710_port, inb(ct82c710_data), 0);
+}
+
+/*
+ * See if we can find a 82C710 device. Read mouse address.
+ */
+
+static int __init ct82c710_probe(void)
+{
+	outb_p(0x55, 0x2fa);				/* Any value except 9, ff or 36 */
+	outb_p(0xaa, 0x3fa);				/* Inverse of 55 */
+	outb_p(0x36, 0x3fa);				/* Address the chip */
+	outb_p(0xe4, 0x3fa);				/* 390/4; 390 = config address */
+	outb_p(0x1b, 0x2fa);				/* Inverse of e4 */
+	outb_p(0x0f, 0x390);				/* Write index */
+	if (inb_p(0x391) != 0xe4)			/* Config address found? */
+		return -1;				/* No: no 82C710 here */
+
+	outb_p(0x0d, 0x390);				/* Write index */
+	ct82c710_data = inb_p(0x391) << 2;		/* Get mouse I/O address */
+	ct82c710_status = ct82c710_data + 1;
+	outb_p(0x0f, 0x390);
+	outb_p(0x0f, 0x391);				/* Close config mode */
+
+	return 0;
+}
+
+int __init ct82c710_init(void)
+{
+	if (ct82c710_probe())
+		return -ENODEV;
+
+	if (request_region(ct82c710_data, 2, "ct82c710"))
+		return -EBUSY;
+
+	sprintf(ct82c710_phys, "isa%04x/serio0", ct82c710_data);
+
+	serio_register_port(&ct82c710_port);
+
+	printk(KERN_INFO "serio: C&T 82c710 mouse port at %#x irq %d\n",
+		ct82c710_data, CT82C710_IRQ);
+
+	return 0;
+}
+
+void __exit ct82c710_exit(void)
+{
+	serio_unregister_port(&ct82c710_port);
+	release_region(ct82c710_data, 2);
+}
+
+module_init(ct82c710_init);
+module_exit(ct82c710_exit);

drivers/input/serio/i8042.c

+/*
+ * $Id: i8042.c,v 1.21 2002/03/01 22:09:27 jsimmons Exp $
+ *
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ */
+
+/*
+ *  i8042 keyboard and mouse controller driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <asm/io.h>
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/config.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/sched.h>	/* request/free_irq */
+
+#include "i8042.h"
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("i8042 keyboard and mouse controller driver");
+MODULE_LICENSE("GPL");
+
+MODULE_PARM(i8042_noaux, "1i");
+MODULE_PARM(i8042_unlock, "1i");
+MODULE_PARM(i8042_reset, "1i");
+MODULE_PARM(i8042_direct, "1i");
+
+static int i8042_noaux;
+static int i8042_unlock;
+static int i8042_reset;
+static int i8042_direct;
+
+spinlock_t i8042_lock = SPIN_LOCK_UNLOCKED;
+
+struct i8042_values {
+	int irq;
+	unsigned char disable;
+	unsigned char irqen;
+	unsigned char exists;
+	unsigned char *name;
+	unsigned char *phys;
+};
+
+static struct serio i8042_kbd_port;
+static struct serio i8042_aux_port;
+static unsigned char i8042_initial_ctr;
+static unsigned char i8042_ctr;
+
+#ifdef I8042_DEBUG_IO
+static unsigned long i8042_start;
+#endif
+
+static unsigned long i8042_unxlate_seen[128 / BITS_PER_LONG];
+static unsigned char i8042_unxlate_table[128] = {
+	  0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13,
+	 21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27,
+	 35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42,
+	 50, 49, 58, 65, 73, 74, 89,124, 17, 41, 88,  5,  6,  4, 12,  3,
+	 11,  2, 10,  1,  9,119,126,108,117,125,123,107,115,116,121,105,
+	114,122,112,113,127, 96, 97,120,  7, 15, 23, 31, 39, 47, 55, 63,
+	 71, 79, 86, 94,  8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 87,111,
+	 19, 25, 57, 81, 83, 92, 95, 98, 99,100,101,103,104,106,109,110
+};
+
+static void i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+/*
+ * The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to
+ * be ready for reading values from it / writing values to it.
+ */
+
+static int i8042_wait_read(void)
+{
+	int i = 0;
+	while ((~inb(I8042_STATUS_REG) & I8042_STR_OBF) && (i < I8042_CTL_TIMEOUT)) {
+		udelay(50);
+		i++;
+	}
+	return -(i == I8042_CTL_TIMEOUT);
+}
+
+static int i8042_wait_write(void)
+{
+	int i = 0;
+	while ((inb(I8042_STATUS_REG) & I8042_STR_IBF) && (i < I8042_CTL_TIMEOUT)) {
+		udelay(50);
+		i++;
+	}
+	return -(i == I8042_CTL_TIMEOUT);
+}
+
+/*
+ * i8042_flush() flushes all data that may be in the keyboard and mouse buffers
+ * of the i8042 down the toilet.
+ */
+
+static int i8042_flush(void)
+{
+	unsigned long flags;
+	int i = 0;
+
+	spin_lock_irqsave(&i8042_lock, flags);
+
+	while ((inb(I8042_STATUS_REG) & I8042_STR_OBF) && (i++ < I8042_BUFFER_SIZE))
+#ifdef I8042_DEBUG_IO
+		printk(KERN_DEBUG "i8042.c: %02x <- i8042 (flush) [%d]\n",
+			inb(I8042_DATA_REG), (int) (jiffies - i8042_start));
+#else
+		inb(I8042_DATA_REG);
+#endif
+
+	spin_unlock_irqrestore(&i8042_lock, flags);
+
+	return i;
+}
+
+/*
+ * i8042_command() executes a command on the i8042. It also sends the input parameter(s)
+ * of the commands to it, and receives the output value(s). The parameters are to be
+ * stored in the param array, and the output is placed into the same array. The number
+ * of the parameters and output values is encoded in bits 8-11 of the command
+ * number.
+ */
+
+static int i8042_command(unsigned char *param, int command)
+{ 
+	unsigned long flags;
+	int retval = 0, i = 0;
+
+	spin_lock_irqsave(&i8042_lock, flags);
+
+	retval = i8042_wait_write();
+	if (!retval) {
+#ifdef I8042_DEBUG_IO
+		printk(KERN_DEBUG "i8042.c: %02x -> i8042 (command) [%d]\n",
+			command & 0xff, (int) (jiffies - i8042_start));
+#endif
+		outb(command & 0xff, I8042_COMMAND_REG);
+	}
+	
+	if (!retval)
+		for (i = 0; i < ((command >> 12) & 0xf); i++) {
+			if ((retval = i8042_wait_write())) break;
+#ifdef I8042_DEBUG_IO
+			printk(KERN_DEBUG "i8042.c: %02x -> i8042 (parameter) [%d]\n",
+				param[i], (int) (jiffies - i8042_start));
+#endif
+			outb(param[i], I8042_DATA_REG);
+		}
+
+	if (!retval)
+		for (i = 0; i < ((command >> 8) & 0xf); i++) {
+			if ((retval = i8042_wait_read())) break;
+			if (inb(I8042_STATUS_REG) & I8042_STR_AUXDATA) 
+				param[i] = ~inb(I8042_DATA_REG);
+			else
+				param[i] = inb(I8042_DATA_REG);
+#ifdef I8042_DEBUG_IO
+			printk(KERN_DEBUG "i8042.c: %02x <- i8042 (return) [%d]\n",
+				param[i], (int) (jiffies - i8042_start));
+#endif
+		}
+
+	spin_unlock_irqrestore(&i8042_lock, flags);
+
+#ifdef I8042_DEBUG_IO
+	if (retval)
+		printk(KERN_DEBUG "i8042.c:      -- i8042 (timeout) [%d]\n",
+			(int) (jiffies - i8042_start));
+#endif
+
+	return retval;
+}
+
+/*
+ * i8042_kbd_write() sends a byte out through the keyboard interface.
+ * It also automatically refreshes the CTR value, since some i8042's
+ * trash their CTR after attempting to send data to an nonexistent
+ * device.
+ */
+
+static int i8042_kbd_write(struct serio *port, unsigned char c)
+{
+	unsigned long flags;
+	int retval = 0;
+
+	spin_lock_irqsave(&i8042_lock, flags);
+
+	if(!(retval = i8042_wait_write())) {
+#ifdef I8042_DEBUG_IO
+		printk(KERN_DEBUG "i8042.c: %02x -> i8042 (kbd-data) [%d]\n",
+			c, (int) (jiffies - i8042_start));
+#endif
+		outb(c, I8042_DATA_REG);
+	}
+
+	spin_unlock_irqrestore(&i8042_lock, flags);
+
+	return retval;
+}
+
+/*
+ * i8042_aux_write() sends a byte out through the aux interface.
+ */
+
+static int i8042_aux_write(struct serio *port, unsigned char c)
+{
+	int retval;
+
+/*
+ * Send the byte out.
+ */
+
+	retval  = i8042_command(&c, I8042_CMD_AUX_SEND);
+
+/*
+ * Here we restore the CTR value. I don't know why, but i8042's in half-AT
+ * mode tend to trash their CTR when doing the AUX_SEND command.
+ */
+
+	retval += i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR);
+
+/*
+ * Make sure the interrupt happens and the character is received even
+ * in the case the IRQ isn't wired, so that we can receive further
+ * characters later.
+ */
+
+	i8042_interrupt(0, port, NULL);
+	return retval;
+}
+
+/*
+ * i8042_open() is called when a port is open by the higher layer.
+ * It allocates an interrupt and enables the port.
+ */
+
+static int i8042_open(struct serio *port)
+{
+	struct i8042_values *values = port->driver;
+
+/*
+ * Allocate the interrupt
+ */
+
+	if (request_irq(values->irq, i8042_interrupt, 0, "i8042", NULL)) {
+		printk(KERN_ERR "i8042.c: Can't get irq %d for %s\n", values->irq, values->name);
+		return -1;
+	}
+
+/*
+ * Enable the device and its interrupt.
+ */
+
+	i8042_ctr |= values->irqen;
+	i8042_ctr &= ~values->disable;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		printk(KERN_ERR "i8042.c: Can't write CTR while opening %s.\n", values->name);
+		return -1;
+	}
+
+/*
+ * Flush buffers
+ */
+
+	i8042_flush();
+
+	return 0;
+}
+
+/*
+ * i8042_close() frees the interrupt, and disables the interface when the
+ * upper layer doesn't need it anymore.
+ */
+
+static void i8042_close(struct serio *port)
+{
+	struct i8042_values *values = port->driver;
+
+/*
+ * Disable the device and its interrupt.
+ */
+
+	i8042_ctr &= ~values->irqen;
+	i8042_ctr |= values->disable;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		printk(KERN_ERR "i8042.c: Can't write CTR while closing %s.\n", values->name);
+		return;
+	}
+
+/*
+ * Free the interrupt
+ */
+
+	free_irq(values->irq, NULL);
+}
+
+/*
+ * Structures for registering the devices in the serio.c module.
+ */
+
+static struct i8042_values i8042_kbd_values = {
+	irq:		I8042_KBD_IRQ,
+	irqen:		I8042_CTR_KBDINT,
+	disable:	I8042_CTR_KBDDIS,
+	name:		"KBD",
+	exists:		0,
+};
+
+static struct serio i8042_kbd_port =
+{
+	type:		SERIO_8042,
+	write:		i8042_kbd_write,
+	open:		i8042_open,
+	close:		i8042_close,
+	driver:		&i8042_kbd_values,
+	name:		"i8042 Kbd Port",
+	phys:		"isa0060/serio0",
+};
+
+static struct i8042_values i8042_aux_values = {
+	irq:		I8042_AUX_IRQ,
+	irqen:		I8042_CTR_AUXINT,
+	disable:	I8042_CTR_AUXDIS,
+	name:		"AUX",
+	exists:		0,
+};
+
+static struct serio i8042_aux_port =
+{
+	type:		SERIO_8042,
+	write:		i8042_aux_write,
+	open:		i8042_open,
+	close:		i8042_close,
+	driver:		&i8042_aux_values,
+	name:		"i8042 Aux Port",
+	phys:		"isa0060/serio1",
+};
+
+/*
+ * i8042_interrupt() is the most important function in this driver -
+ * it handles the interrupts from the i8042, and sends incoming bytes
+ * to the upper layers.
+ */
+
+static void i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	unsigned long flags;
+	unsigned char str, data;
+
+	spin_lock_irqsave(&i8042_lock, flags);
+
+	while ((str = inb(I8042_STATUS_REG)) & I8042_STR_OBF) {
+
+		data = inb(I8042_DATA_REG);
+
+#ifdef I8042_DEBUG_IO
+		printk(KERN_DEBUG "i8042.c: %02x <- i8042 (interrupt-%s) [%d]\n",
+			data, (str & I8042_STR_AUXDATA) ? "aux" : "kbd", (int) (jiffies - i8042_start));
+#endif
+
+		if (i8042_aux_values.exists && (str & I8042_STR_AUXDATA)) {
+			if (i8042_aux_port.dev)
+				i8042_aux_port.dev->interrupt(&i8042_aux_port, data, 0);
+		} else {
+			if (i8042_kbd_values.exists && i8042_kbd_port.dev) {
+				if (!i8042_direct) {
+					if (data > 0x7f) {
+						if (test_and_clear_bit(data & 0x7f, i8042_unxlate_seen)) {
+							i8042_kbd_port.dev->interrupt(&i8042_kbd_port, 0xf0, 0);	
+							data = i8042_unxlate_table[data & 0x7f];
+						}
+					} else {
+						set_bit(data, i8042_unxlate_seen);
+						data = i8042_unxlate_table[data];
+					}
+				}
+				i8042_kbd_port.dev->interrupt(&i8042_kbd_port, data, 0);
+			}
+		}
+	}
+
+	spin_unlock_irqrestore(&i8042_lock, flags);
+}
+
+/*
+ * i8042_controller init initializes the i8042 controller, and,
+ * most importantly, sets it into non-xlated mode.
+ */
+	
+static int __init i8042_controller_init(void)
+{
+
+/*
+ * Check the i/o region before we touch it.
+ */
+#if !defined(__i386__) && !defined(__sh__) && !defined(__alpha__) 	
+	if (check_region(I8042_DATA_REG, 16)) {
+		printk(KERN_ERR "i8042.c: %#x port already in use!\n", I8042_DATA_REG);
+		return -1;
+	}
+#endif
+
+/*
+ * Test the i8042. We need to know if it thinks it's working correctly
+ * before doing anything else.
+ */
+
+	i8042_flush();
+
+	if (i8042_reset) {
+
+		unsigned char param;
+
+		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
+			printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+			return -1;
+		}
+
+		if (param != I8042_RET_CTL_TEST) {
+			printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
+				 param, I8042_RET_CTL_TEST);
+			return -1;
+		}
+	}
+
+/*
+ * Read the CTR.
+ */
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
+		printk(KERN_ERR "i8042.c: Can't read CTR while initializing i8042.\n");
+		return -1;
+	}
+
+/*
+ * Save the CTR for restoral on unload / reboot.
+ */
+
+	i8042_initial_ctr = i8042_ctr;
+
+/*
+ * Disable both interfaces and their interrupts.
+ */
+
+	i8042_ctr |= I8042_CTR_KBDDIS;
+	i8042_ctr &= ~I8042_CTR_KBDINT;
+
+/*
+ * Handle keylock.
+ */
+
+	if (~inb(I8042_STATUS_REG) & I8042_STR_KEYLOCK) {
+
+		if (i8042_unlock) {
+			i8042_ctr |= I8042_CTR_IGNKEYLOCK;
+		} else {
+			printk(KERN_WARNING "i8042.c: Warning: Keylock active.\n");
+		}
+	}
+
+/*
+ * If the chip is configured into nontranslated mode by the BIOS, don't
+ * bother enabling translating and just use that happily.
+ */
+
+	if (~i8042_ctr & I8042_CTR_XLATE)
+		i8042_direct = 1;
+
+/*
+ * Set nontranslated mode for the kbd interface if requested by an option.
+ * This is vital for a working scancode set 3 support. After this the kbd
+ * interface becomes a simple serial in/out, like the aux interface is. If
+ * the user doesn't wish this, the driver tries to untranslate the values
+ * after the i8042 translates them.
+ */
+
+	if (i8042_direct)
+		i8042_ctr &= ~I8042_CTR_XLATE;
+
+/*
+ * Write CTR back.
+ */
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		printk(KERN_ERR "i8042.c: Can't write CTR while initializing i8042.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Here we try to reset everything back to a state in which the BIOS will be
+ * able to talk to the hardware when rebooting.
+ */
+
+void i8042_controller_cleanup(void)
+{
+
+/*
+ * Reset the controller.
+ */
+
+	if (i8042_reset) {
+		unsigned char param;
+
+		if (i8042_command(&param, I8042_CMD_CTL_TEST))
+			printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n");
+	}
+
+/*
+ * Restore the original control register setting.
+ */
+
+	i8042_ctr = i8042_initial_ctr;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+		printk(KERN_WARNING "i8042.c: Can't restore CTR.\n");
+
+/*
+ * Reset anything that is connected to the ports if the ports
+ * are enabled in the original config.
+ */
+
+	if (i8042_kbd_values.exists)
+		i8042_kbd_write(&i8042_kbd_port, 0xff);
+
+	if (i8042_aux_values.exists)
+		i8042_aux_write(&i8042_aux_port, 0xff);
+}
+
+/*
+ * i8042_check_aux() applies as much paranoia as it can at detecting
+ * the presence of an AUX interface.
+ */
+
+static int __init i8042_check_aux(struct i8042_values *values, struct serio *port)
+{
+	unsigned char param;
+
+	i8042_flush();
+
+/*
+ * Internal loopback test - filters out AT-type i8042's
+ */
+
+	param = 0x5a;
+
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0xa5)
+		return -1;
+
+/*
+ * External connection test - filters out AT-soldered PS/2 i8042's
+ */
+
+	if (i8042_command(&param, I8042_CMD_AUX_TEST) || param)
+		return -1;
+
+/*
+ * Bit assignment test - filters out PS/2 i8042's in AT mode
+ */
+	
+	if (i8042_command(&param, I8042_CMD_AUX_DISABLE))
+		return -1;
+
+	if (i8042_command(&param, I8042_CMD_CTL_RCTR) || (~param & I8042_CTR_AUXDIS))
+		return -1;	
+
+	if (i8042_command(&param, I8042_CMD_AUX_TEST) || param) {
+
+/*
+ * We've got an old AMI i8042 with 'Bad Cache' commands.
+ */
+
+		i8042_command(&param, I8042_CMD_AUX_ENABLE);
+		return -1;
+	}
+
+	if (i8042_command(&param, I8042_CMD_AUX_ENABLE))
+		return -1;
+
+	if (i8042_command(&param, I8042_CMD_CTL_RCTR) || (param & I8042_CTR_AUXDIS))
+		return -1;	
+
+/*
+ * Disable the interface.
+ */
+
+	i8042_ctr |= I8042_CTR_AUXDIS;
+	i8042_ctr &= ~I8042_CTR_AUXINT;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+		return -1;
+
+	return 0;
+}
+
+/*
+ * i8042_port_register() marks the device as existing,
+ * registers it, and reports to the user.
+ */
+
+static int __init i8042_port_register(struct i8042_values *values, struct serio *port)
+{
+	values->exists = 1;
+	serio_register_port(port);
+	printk(KERN_INFO "serio: i8042 %s port at %#x,%#x irq %d\n",
+		values->name, I8042_DATA_REG, I8042_COMMAND_REG, values->irq);
+
+	return 0;
+}
+
+/*
+ * Module init and cleanup functions.
+ */
+
+void __init i8042_setup(char *str, int *ints)
+{
+	if (!strcmp(str, "i8042_reset=1"))
+		i8042_reset = 1;
+	if (!strcmp(str, "i8042_noaux=1"))
+		i8042_noaux = 1;
+	if (!strcmp(str, "i8042_unlock=1"))
+		i8042_unlock = 1;
+	if (!strcmp(str, "i8042_direct=1"))
+		i8042_direct = 1;
+}
+
+/*
+ * Reset the 8042 back to original mode.
+ */
+static int i8042_notify_sys(struct notifier_block *this, unsigned long code,
+        		    void *unused)
+{
+        if (code==SYS_DOWN || code==SYS_HALT) 
+        	i8042_controller_cleanup();
+        return NOTIFY_DONE;
+}
+
+static struct notifier_block i8042_notifier=
+{
+        i8042_notify_sys,
+        NULL,
+        0
+};
+
+int __init i8042_init(void)
+{
+#ifdef I8042_DEBUG_IO
+	i8042_start = jiffies;
+#endif
+
+	if (i8042_controller_init())
+		return -ENODEV;
+
+	i8042_port_register(&i8042_kbd_values, &i8042_kbd_port);
+		
+	if (!i8042_noaux && !i8042_check_aux(&i8042_aux_values, &i8042_aux_port))
+		i8042_port_register(&i8042_aux_values, &i8042_aux_port);
+
+/* 
+ * On ix86 platforms touching the i8042 data register region can do really
+ * bad things. Because of this the region is always reserved on ix86 boxes.  
+ */
+#if !defined(__i386__) && !defined(__sh__) && !defined(__alpha__)
+	request_region(I8042_DATA_REG, 16, "i8042");
+#endif
+	register_reboot_notifier(&i8042_notifier);
+	return 0;
+}
+
+void __exit i8042_exit(void)
+{
+	unregister_reboot_notifier(&i8042_notifier);
+	
+	if (i8042_kbd_values.exists)
+		serio_unregister_port(&i8042_kbd_port);
+
+	if (i8042_aux_values.exists)
+		serio_unregister_port(&i8042_aux_port);
+
+	i8042_controller_cleanup();
+#if !defined(__i386__) && !defined(__sh__) && !defined(__alpha__)
+	release_region(I8042_DATA_REG, 16);
+#endif
+}
+
+module_init(i8042_init);
+module_exit(i8042_exit);

drivers/input/serio/i8042.h

+#ifndef _I8042_H
+#define _I8042_H
+
+/*
+ * $Id: i8042.h,v 1.6 2001/10/05 22:48:09 vojtech Exp $
+ *
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+/*
+ * If you want to reset your i8042 upon boot, define this.
+ */
+
+#undef I8042_RESET
+
+/*
+ * If you want to trace all the i/o the i8042 module does for
+ * debugging purposes, define this.
+ */
+
+#undef I8042_DEBUG_IO
+
+/*
+ * On most PC based systems the keyboard IRQ is 1.
+ */
+
+#define I8042_KBD_IRQ CONFIG_I8042_KBD_IRQ 
+
+/*
+ * On most PC based systems the aux port IRQ is 12. There are exceptions,
+ * though. Unfortunately IRQ probing is not possible without touching
+ * the device attached to the port.
+ */
+
+#define I8042_AUX_IRQ CONFIG_I8042_AUX_IRQ
+
+/*
+ * This is in 50us units, the time we wait for the i8042 to react. This
+ * has to be long enough for the i8042 itself to timeout on sending a byte
+ * to a non-existent mouse.
+ */
+
+#define I8042_CTL_TIMEOUT	10000
+
+/*
+ * Register numbers.
+ */
+
+#define I8042_COMMAND_REG	CONFIG_I8042_REG_BASE + 4	
+#define I8042_STATUS_REG	CONFIG_I8042_REG_BASE + 4	
+#define I8042_DATA_REG		CONFIG_I8042_REG_BASE	
+
+/*
+ * Status register bits.
+ */
+
+#define I8042_STR_PARITY	0x80
+#define I8042_STR_TIMEOUT	0x40
+#define I8042_STR_AUXDATA	0x20
+#define I8042_STR_KEYLOCK	0x10
+#define I8042_STR_CMDDAT	0x08
+#define I8042_STR_IBF		0x02
+#define	I8042_STR_OBF		0x01
+
+/*
+ * Control register bits.
+ */
+
+#define I8042_CTR_KBDINT	0x01
+#define I8042_CTR_AUXINT	0x02
+#define I8042_CTR_IGNKEYLOCK	0x08
+#define I8042_CTR_KBDDIS	0x10
+#define I8042_CTR_AUXDIS	0x20
+#define I8042_CTR_XLATE		0x40
+
+/*
+ * Commands.
+ */
+
+#define I8042_CMD_CTL_RCTR	0x0120
+#define I8042_CMD_CTL_WCTR	0x1060
+#define I8042_CMD_CTL_TEST	0x01aa
+
+#define I8042_CMD_KBD_DISABLE	0x00ad
+#define I8042_CMD_KBD_ENABLE	0x00ae
+#define I8042_CMD_KBD_TEST	0x01ab
+#define I8042_CMD_KBD_LOOP	0x11d2
+
+#define I8042_CMD_AUX_DISABLE	0x00a7
+#define I8042_CMD_AUX_ENABLE	0x00a8
+#define I8042_CMD_AUX_TEST	0x01a9
+#define I8042_CMD_AUX_SEND	0x10d4
+#define I8042_CMD_AUX_LOOP	0x11d3
+
+/*
+ * Return codes.
+ */
+
+#define I8042_RET_CTL_TEST	0x55
+
+/*
+ * Expected maximum internal i8042 buffer size. This is used for flushing
+ * the i8042 buffers. 32 should be more than enough.
+ */
+
+#define I8042_BUFFER_SIZE	32
+
+#endif /* _I8042_H */

drivers/input/serio/parkbd.c

+/*
+ * $Id: parkbd.c,v 1.10 2002/03/13 10:09:20 vojtech Exp $
+ *
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ */
+
+/*
+ *  Parallel port to Keyboard port adapter driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/module.h>
+#include <linux/parport.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Parallel port to Keyboard port adapter driver");
+MODULE_LICENSE("GPL");
+
+MODULE_PARM(parkbd, "1i");
+MODULE_PARM(parkbd_mode, "1i");
+
+#define PARKBD_CLOCK	0x01	/* Strobe & Ack */
+#define PARKBD_DATA	0x02	/* AutoFd & Busy */
+
+static int parkbd = 0;
+static int parkbd_mode = SERIO_8042;
+
+static int parkbd_buffer = 0;
+static int parkbd_counter = 0;
+static int parkbd_last = 0;
+static int parkbd_writing = 0;
+static unsigned long parkbd_start = 0;
+
+static struct pardevice *parkbd_dev;
+
+static char parkbd_name[] = "PARKBD AT/XT keyboard adapter";
+static char parkbd_phys[32];
+
+static int parkbd_readlines(void)
+{
+	return (parport_read_status(parkbd_dev->port) >> 6) ^ 2;
+}
+
+static void parkbd_writelines(int data)
+{
+	parport_write_control(parkbd_dev->port, (~data & 3) | 0x10);
+}
+
+static int parkbd_write(struct serio *port, unsigned char c)
+{
+	unsigned char p;
+
+	if (!parkbd_mode) return -1;
+
+        p = c ^ (c >> 4);
+	p = p ^ (p >> 2);
+	p = p ^ (p >> 1);
+
+	parkbd_counter = 0;
+	parkbd_writing = 1;
+	parkbd_buffer = c | (((int) (~p & 1)) << 8) | 0x600;
+
+	parkbd_writelines(2);
+
+	return 0;
+}
+
+static int parkbd_open(struct serio *port)
+{
+	return 0;
+}
+
+static void parkbd_close(struct serio *port)
+{
+}
+
+static struct serio parkbd_port =
+{
+	write:	parkbd_write,
+	open:	parkbd_open,
+	close:	parkbd_close,
+	name:	parkbd_name,
+	phys:	parkbd_phys,
+};
+
+static void parkbd_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+
+	if (parkbd_writing) {
+
+		if (parkbd_counter && ((parkbd_counter == 11) || time_after(jiffies, parkbd_last + HZ/100))) {
+			parkbd_counter = 0;
+			parkbd_buffer = 0;
+			parkbd_writing = 0;
+			parkbd_writelines(3);
+			return;
+		}	
+
+		parkbd_writelines(((parkbd_buffer >> parkbd_counter++) & 1) | 2);
+
+		if (parkbd_counter == 11) {
+			parkbd_counter = 0;
+			parkbd_buffer = 0;
+			parkbd_writing = 0;
+			parkbd_writelines(3);
+		}
+
+	} else {
+
+		if ((parkbd_counter == parkbd_mode + 10) || time_after(jiffies, parkbd_last + HZ/100)) {
+			parkbd_counter = 0;
+			parkbd_buffer = 0;
+		}	
+
+		parkbd_buffer |= (parkbd_readlines() >> 1) << parkbd_counter++;
+
+		if (parkbd_counter == parkbd_mode + 10) {
+			if (parkbd_port.dev)
+				parkbd_port.dev->interrupt(&parkbd_port, (parkbd_buffer >> (2 - parkbd_mode)) & 0xff, 0);
+		}
+	}
+
+	parkbd_last = jiffies;
+}
+
+static int parkbd_getport(void)
+{
+	struct parport *pp;
+
+	if (parkbd < 0) {
+		printk(KERN_ERR "parkbd: no port specified\n");
+		return -ENODEV;
+	}
+
+	for (pp = parport_enumerate(); pp != NULL && (parkbd > 0); pp = pp->next) parkbd--;
+
+	if (pp == NULL) {
+		printk(KERN_ERR "parkbd: no such parport\n");
+		return -ENODEV;
+	}
+
+	parkbd_dev = parport_register_device(pp, "parkbd", NULL, NULL, parkbd_interrupt, PARPORT_DEV_EXCL, NULL);
+
+	if (!parkbd_dev)
+		return -ENODEV;
+
+	if (parport_claim(parkbd_dev)) {
+		parport_unregister_device(parkbd_dev);
+		return -EBUSY;
+	}
+
+	parkbd_start = jiffies;
+
+	return 0;
+}
+
+
+int __init parkbd_init(void)
+{
+	if (parkbd_getport()) return -1;
+	parkbd_writelines(3);
+	parkbd_port.type = parkbd_mode;
+
+	sprintf(parkbd_phys, "%s/serio0", parkbd_dev->port->name);
+
+	serio_register_port(&parkbd_port);
+
+	printk(KERN_INFO "serio: PARKBD %s adapter on %s\n",
+                        parkbd_mode ? "AT" : "XT", parkbd_dev->port->name);
+
+	return 0;
+}
+
+void __exit parkbd_exit(void)
+{
+	parport_release(parkbd_dev);
+	serio_unregister_port(&parkbd_port);
+	parport_unregister_device(parkbd_dev);
+}
+
+module_init(parkbd_init);
+module_exit(parkbd_exit);

drivers/input/serio/rpckbd.c

+/*
+ * $Id: rpckbd.c,v 1.7 2001/09/25 10:12:07 vojtech Exp $
+ *
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ *
+ *  Based on the work of:
+ *	unknown author
+ */
+
+/*
+ * Acorn RiscPC PS/2 keyboard controller driver for Linux/ARM
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/iomd.h>
+#include <asm/system.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Acorn RiscPC PS/2 keyboard controller driver");
+MODULE_LICENSE("GPL");
+
+static inline void rpckbd_write(unsigned char val)
+{
+	while(!(inb(IOMD_KCTRL) & (1 << 7)));
+	outb(val, IOMD_KARTTX);
+}
+
+static struct serio rpckbd_port =
+{
+	type:	SERIO_8042,
+	write:	rpckbd_write,
+	name: 	"RiscPC PS/2 kbd port",
+	phys:	"rpckbd/serio0",
+};
+
+static void rpckbd_rx(int irq, void *dev_id, struct pt_regs *regs)
+{
+	kbd_pt_regs = regs;
+
+	while (inb(IOMD_KCTRL) & (1 << 5))
+		if (rpckbd_port.dev)
+               		 rpckbd_port.dev->interrupt(&rpckbd_port, inb(IOMD_KARTRX), 0);
+
+}
+
+static void rpckbd_tx(int irq, void *dev_id, struct pt_regs *regs)
+{
+}
+
+static int __init rpckbd_init(void)
+{
+	unsigned long flags;
+
+	/* Reset the keyboard state machine. */
+	outb(0, IOMD_KCTRL);
+	outb(8, IOMD_KCTRL);
+
+	save_flags_cli(flags);
+
+	if (request_irq(IRQ_KEYBOARDRX, rpckbd_rx, 0, "rpckbd", NULL) != 0) {
+		printk(KERN_ERR "rpckbd.c: Could not allocate keyboard receive IRQ!\n")
+		return -EBUSY;
+	}
+
+	if (request_irq(IRQ_KEYBOARDTX, rpckbd_tx, 0, "rpckbd", NULL) != 0) {
+		printk(KERN_ERR "rpckbd.c: Could not allocate keyboard transmit IRQ!\n")
+		free_irq(IRQ_KEYBOARDRX, NULL);
+		return -EBUSY;
+	}
+
+	disable_irq(IRQ_KEYBOARDTX);
+	(void)IOMD_KARTRX;
+
+	restore_flags(flags);
+
+	register_serio_port(&rpckbd_port);
+	printk(KERN_INFO "serio: RiscPC PS/2 kbd port irq %d %d\n", IRQ_KEYBOARDRX, IRQ_KEYBOARDTX);
+
+	return 0;
+}
+
+static void __exit rpckbd_exit(void)
+{
+	free_irq(IRQ_KEYBOARDRX, NULL);
+	free_irq(IRQ_KEYBOARDTX, NULL);	
+
+	unregister_serio_port(&rpckbd_port);
+}
+
+module_init(rpckbd_init);
+module_exit(rpckbd_exit);

drivers/input/touchscreen/Config.help

+CONFIG_INPUT_TOUCHSCREEN
+  Say Y here, and a list of supported touchscreens will be displayed.
+  This option doesn't affect the kernel.
+
+  If unsure, say Y.
+
+CONFIG_TOUCHSCREEN_GUNZE
+  Say Y here if you have the Gunze AHL-51 touchscreen connected to
+  your system.
+
+  If unsure, say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called gunze.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.

drivers/input/touchscreen/Config.in

+#
+# Mouse driver configuration
+#
+
+bool 'Touchscreens' CONFIG_INPUT_TOUCHSCREEN
+
+dep_tristate '  Gunze AHL-51S touchscreen' CONFIG_TOUCHSCREEN_GUNZE $CONFIG_INPUT $CONFIG_INPUT_TOUCHSCREEN $CONFIG_SERIO

drivers/input/touchscreen/Makefile

+#
+# Makefile for the mouse drivers.
+#
+
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_TOUCHSCREEN_GUNZE)	+= gunze.o
+
+# The global Rules.make.
+
+include $(TOPDIR)/Rules.make

drivers/input/touchscreen/gunze.c

+/*
+ * $Id: gunze.c,v 1.12 2001/09/25 10:12:07 vojtech Exp $
+ *
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ */
+
+/*
+ * Gunze AHL-51S touchscreen driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Gunze AHL-51S touchscreen driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define	GUNZE_MAX_LENGTH	10
+
+static char *gunze_name = "Gunze AHL-51S TouchScreen";
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct gunze {
+	struct input_dev dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[GUNZE_MAX_LENGTH];
+	char phys[32];
+};
+
+static void gunze_process_packet(struct gunze* gunze)
+{
+	struct input_dev *dev = &gunze->dev;
+
+	if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' ||
+		(gunze->data[0] != 'T' && gunze->data[0] != 'R')) {
+		gunze->data[10] = 0;
+		printk(KERN_WARNING "gunze.c: bad packet: >%s<\n", gunze->data);
+		return;
+	}
+
+	input_report_abs(dev, ABS_X, simple_strtoul(gunze->data + 1, NULL, 10) * 4);
+	input_report_abs(dev, ABS_Y, 3072 - simple_strtoul(gunze->data + 6, NULL, 10) * 3);
+	input_report_key(dev, BTN_TOUCH, gunze->data[0] == 'T');
+}
+
+static void gunze_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
+{
+	struct gunze* gunze = serio->private;
+
+	if (data == '\r') {
+		gunze_process_packet(gunze);
+		gunze->idx = 0;
+	} else {
+		if (gunze->idx < GUNZE_MAX_LENGTH)
+			gunze->data[gunze->idx++] = data;
+	} 
+}
+
+/*
+ * gunze_disconnect() is the opposite of gunze_connect()
+ */
+
+static void gunze_disconnect(struct serio *serio)
+{
+	struct gunze* gunze = serio->private;
+	input_unregister_device(&gunze->dev);
+	serio_close(serio);
+	kfree(gunze);
+}
+
+/*
+ * gunze_connect() is the routine that is called when someone adds a
+ * new serio device. It looks whether it was registered as a Gunze touchscreen
+ * and if yes, registers it as an input device.
+ */
+
+static void gunze_connect(struct serio *serio, struct serio_dev *dev)
+{
+	struct gunze *gunze;
+
+	if (serio->type != (SERIO_RS232 | SERIO_GUNZE))
+		return;
+
+	if (!(gunze = kmalloc(sizeof(struct gunze), GFP_KERNEL)))
+		return;
+
+	memset(gunze, 0, sizeof(struct gunze));
+
+	gunze->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);	
+	gunze->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
+	gunze->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+
+	gunze->dev.absmin[ABS_X] = 96;   gunze->dev.absmin[ABS_Y] = 72;
+	gunze->dev.absmax[ABS_X] = 4000; gunze->dev.absmax[ABS_Y] = 3000;
+
+	gunze->serio = serio;
+	serio->private = gunze;
+
+	sprintf(gunze->phys, "%s/input0", serio->phys);
+
+	gunze->dev.private = gunze;
+	gunze->dev.name = gunze_name;
+	gunze->dev.phys = gunze->phys;
+	gunze->dev.idbus = BUS_RS232;
+	gunze->dev.idvendor = SERIO_GUNZE;
+	gunze->dev.idproduct = 0x0051;
+	gunze->dev.idversion = 0x0100;
+
+	if (serio_open(serio, dev)) {
+		kfree(gunze);
+		return;
+	}
+
+	input_register_device(&gunze->dev);
+
+	printk(KERN_INFO "input: %s on %s\n", gunze_name, serio->phys);
+}
+
+/*
+ * The serio device structure.
+ */
+
+static struct serio_dev gunze_dev = {
+	interrupt:	gunze_interrupt,
+	connect:	gunze_connect,
+	disconnect:	gunze_disconnect,
+};
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+int __init gunze_init(void)
+{
+	serio_register_device(&gunze_dev);
+	return 0;
+}
+
+void __exit gunze_exit(void)
+{
+	serio_unregister_device(&gunze_dev);
+}
+
+module_init(gunze_init);
+module_exit(gunze_exit);

drivers/input/tsdev.c

+/*
+ * $Id: tsdev.c,v 1.15 2002/04/10 16:50:19 jsimmons Exp $
+ *
+ *  Copyright (c) 2001 "Crazy" james Simmons 
+ *
+ *  Input driver to Touchscreen device driver module.
+ *
+ *  Sponsored by Transvirtual Technology
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <jsimmons@transvirtual.com>.
+ */
+
+#define TSDEV_MINOR_BASE 	128
+#define TSDEV_MINORS		32
+#define TSDEV_BUFFER_SIZE	64
+
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/config.h>
+#include <linux/smp_lock.h>
+#include <linux/random.h>
+#include <linux/time.h>
+
+#ifndef CONFIG_INPUT_TSDEV_SCREEN_X
+#define CONFIG_INPUT_TSDEV_SCREEN_X	240
+#endif
+#ifndef CONFIG_INPUT_TSDEV_SCREEN_Y
+#define CONFIG_INPUT_TSDEV_SCREEN_Y	320
+#endif
+
+struct tsdev {
+	int exist;
+	int open;
+	int minor;
+	char name[16];
+	wait_queue_head_t wait;
+	struct tsdev_list *list;
+	struct input_handle handle;
+	devfs_handle_t devfs;
+};
+
+/* From Compaq's Touch Screen Specification version 0.2 (draft) */
+typedef struct {
+	short pressure;
+	short x;
+	short y;
+	short millisecs;
+} TS_EVENT;
+
+struct tsdev_list {
+	struct fasync_struct *fasync;
+	struct tsdev_list *next;
+	struct tsdev *tsdev;
+	int head, tail;
+	int oldx, oldy, pendown;
+	TS_EVENT event[TSDEV_BUFFER_SIZE];
+};
+
+static struct input_handler tsdev_handler;
+
+static struct tsdev *tsdev_table[TSDEV_MINORS];
+
+static int xres = CONFIG_INPUT_TSDEV_SCREEN_X;
+static int yres = CONFIG_INPUT_TSDEV_SCREEN_Y;
+
+static int tsdev_fasync(int fd, struct file *file, int on)
+{
+	struct tsdev_list *list = file->private_data;
+	int retval;
+
+	retval = fasync_helper(fd, file, on, &list->fasync);
+	return retval < 0 ? retval : 0;
+}
+
+static int tsdev_open(struct inode *inode, struct file *file)
+{
+	int i = minor(inode->i_rdev) - TSDEV_MINOR_BASE;
+	struct tsdev_list *list;
+
+	if (i >= TSDEV_MINORS || !tsdev_table[i])
+		return -ENODEV;
+
+	if (!(list = kmalloc(sizeof(struct tsdev_list), GFP_KERNEL)))
+		return -ENOMEM;
+	memset(list, 0, sizeof(struct tsdev_list));
+
+	list->tsdev = tsdev_table[i];
+	list->next = tsdev_table[i]->list;
+	tsdev_table[i]->list = list;
+	file->private_data = list;
+
+	if (!list->tsdev->open++)
+		if (list->tsdev->exist)
+			input_open_device(&list->tsdev->handle);
+	return 0;
+}
+
+static int tsdev_release(struct inode *inode, struct file *file)
+{
+	struct tsdev_list *list = file->private_data;
+	struct tsdev_list **listptr;
+
+	listptr = &list->tsdev->list;
+	tsdev_fasync(-1, file, 0);
+
+	while (*listptr && (*listptr != list))
+		listptr = &((*listptr)->next);
+	*listptr = (*listptr)->next;
+
+	if (!--list->tsdev->open) {
+		if (list->tsdev->exist) {
+			input_close_device(&list->tsdev->handle);
+		} else {
+			input_unregister_minor(list->tsdev->devfs);
+			tsdev_table[list->tsdev->minor] = NULL;
+			kfree(list->tsdev);
+		}
+	}
+	kfree(list);
+	return 0;
+}
+
+static ssize_t tsdev_read(struct file *file, char *buffer, size_t count,
+			  loff_t * ppos)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	struct tsdev_list *list = file->private_data;
+	int retval = 0;
+
+	if (list->head == list->tail) {
+		add_wait_queue(&list->tsdev->wait, &wait);
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		while (list->head == list->tail) {
+			if (!list->tsdev->exist) {
+				retval = -ENODEV;
+				break;
+			}
+			if (file->f_flags & O_NONBLOCK) {
+				retval = -EAGAIN;
+				break;
+			}
+			if (signal_pending(current)) {
+				retval = -ERESTARTSYS;
+				break;
+			}
+			schedule();
+		}
+		set_current_state(TASK_RUNNING);
+		remove_wait_queue(&list->tsdev->wait, &wait);
+	}
+
+	if (retval)
+		return retval;
+
+	while (list->head != list->tail
+	       && retval + sizeof(TS_EVENT) <= count) {
+		if (copy_to_user
+		    (buffer + retval, list->event + list->tail,
+		     sizeof(TS_EVENT)))
+			return -EFAULT;
+		list->tail = (list->tail + 1) & (TSDEV_BUFFER_SIZE - 1);
+		retval += sizeof(TS_EVENT);
+	}
+	return retval;
+}
+
+/* No kernel lock - fine */
+static unsigned int tsdev_poll(struct file *file, poll_table * wait)
+{
+	struct tsdev_list *list = file->private_data;
+
+	poll_wait(file, &list->tsdev->wait, wait);
+	if (list->head != list->tail)
+		return POLLIN | POLLRDNORM;
+	return 0;
+}
+
+static int tsdev_ioctl(struct inode *inode, struct file *file,
+		       unsigned int cmd, unsigned long arg)
+{
+/*
+	struct tsdev_list *list = file->private_data;
+        struct tsdev *evdev = list->tsdev;
+        struct input_dev *dev = tsdev->handle.dev;
+        int retval;
+	
+	switch (cmd) {
+		case HHEHE:
+			return 0;
+		case hjff:
+			return 0;
+		default:
+			return 0;
+	}
+*/
+	return -EINVAL;
+}
+
+struct file_operations tsdev_fops = {
+	owner:		THIS_MODULE,
+	open:		tsdev_open,
+	release:	tsdev_release,
+	read:		tsdev_read,
+	poll:		tsdev_poll,
+	fasync:		tsdev_fasync,
+	ioctl:		tsdev_ioctl,
+};
+
+static void tsdev_event(struct input_handle *handle, unsigned int type,
+			unsigned int code, int value)
+{
+	struct tsdev *tsdev = handle->private;
+	struct tsdev_list *list = tsdev->list;
+	struct timeval time;
+	int size;
+
+	while (list) {
+		switch (type) {
+		case EV_ABS:
+			switch (code) {
+			case ABS_X:
+				if (!list->pendown)
+					return;
+
+				size =
+				    handle->dev->absmax[ABS_X] -
+				    handle->dev->absmin[ABS_X];
+				if (size > 0)
+					list->oldx =
+					    ((value -
+					      handle->dev->absmin[ABS_X]) *
+					     xres / size);
+				else
+					list->oldx =
+					    ((value -
+					      handle->dev->absmin[ABS_X]));
+				break;
+			case ABS_Y:
+				if (!list->pendown)
+					return;
+
+				size =
+				    handle->dev->absmax[ABS_Y] -
+				    handle->dev->absmin[ABS_Y];
+				if (size > 0)
+					list->oldy =
+					    ((value -
+					      handle->dev->absmin[ABS_Y]) *
+					     yres / size);
+				else
+					list->oldy =
+					    ((value -
+					      handle->dev->absmin[ABS_Y]));
+				break;
+			case ABS_PRESSURE:
+				list->pendown =
+				    ((value >
+				      handle->dev->
+				      absmin[ABS_PRESSURE])) ? value -
+				    handle->dev->absmin[ABS_PRESSURE] : 0;
+				break;
+			}
+			break;
+
+		case EV_REL:
+			switch (code) {
+			case REL_X:
+				if (!list->pendown)
+					return;
+
+				list->oldx += value;
+				if (list->oldx < 0)
+					list->oldx = 0;
+				else if (list->oldx > xres)
+					list->oldx = xres;
+				break;
+			case REL_Y:
+				if (!list->pendown)
+					return;
+
+				list->oldy += value;
+				if (list->oldy < 0)
+					list->oldy = 0;
+				else if (list->oldy > xres)
+					list->oldy = xres;
+				break;
+			}
+			break;
+
+		case EV_KEY:
+			if (code == BTN_TOUCH || code == BTN_MOUSE) {
+				switch (value) {
+				case 0:
+					list->pendown = 0;
+					break;
+				case 1:
+					if (!list->pendown)
+						list->pendown = 1;
+					break;
+				case 2:
+					return;
+				}
+			} else
+				return;
+			break;
+		}
+		do_gettimeofday(&time);
+		list->event[list->head].millisecs = time.tv_usec / 100;
+		list->event[list->head].pressure = list->pendown;
+		list->event[list->head].x = list->oldx;
+		list->event[list->head].y = list->oldy;
+		list->head = (list->head + 1) & (TSDEV_BUFFER_SIZE - 1);
+		kill_fasync(&list->fasync, SIGIO, POLL_IN);
+		list = list->next;
+	}
+	wake_up_interruptible(&tsdev->wait);
+}
+
+static struct input_handle *tsdev_connect(struct input_handler *handler,
+					  struct input_dev *dev,
+					  struct input_device_id *id)
+{
+	struct tsdev *tsdev;
+	int minor;
+
+	for (minor = 0; minor < TSDEV_MINORS && tsdev_table[minor];
+	     minor++);
+	if (minor == TSDEV_MINORS) {
+		printk(KERN_ERR
+		       "tsdev: You have way too many touchscreens\n");
+		return NULL;
+	}
+
+	if (!(tsdev = kmalloc(sizeof(struct tsdev), GFP_KERNEL)))
+		return NULL;
+	memset(tsdev, 0, sizeof(struct tsdev));
+	init_waitqueue_head(&tsdev->wait);
+
+	tsdev->minor = minor;
+	tsdev_table[minor] = tsdev;
+	sprintf(tsdev->name, "ts%d", minor);
+
+	tsdev->handle.dev = dev;
+	tsdev->handle.name = tsdev->name;
+	tsdev->handle.handler = handler;
+	tsdev->handle.private = tsdev;
+
+	tsdev->devfs =
+	    input_register_minor("ts%d", minor, TSDEV_MINOR_BASE);
+
+	tsdev->exist = 1;
+
+	return &tsdev->handle;
+}
+
+static void tsdev_disconnect(struct input_handle *handle)
+{
+	struct tsdev *tsdev = handle->private;
+
+	tsdev->exist = 0;
+
+	if (tsdev->open) {
+		input_close_device(handle);
+		wake_up_interruptible(&tsdev->wait);
+	} else {
+		input_unregister_minor(tsdev->devfs);
+		tsdev_table[tsdev->minor] = NULL;
+		kfree(tsdev);
+	}
+}
+
+static struct input_device_id tsdev_ids[] = {
+	{
+	      flags:	INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT | INPUT_DEVICE_ID_MATCH_RELBIT,
+	      evbit:	{ BIT(EV_KEY) | BIT(EV_REL) },
+	      keybit:	{ [LONG(BTN_LEFT)] = BIT(BTN_LEFT) },
+	      relbit:	{ BIT(REL_X) | BIT(REL_Y) },
+	 },/* A mouse like device, at least one button, two relative axes */
+
+	{
+	      flags:	INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT | INPUT_DEVICE_ID_MATCH_ABSBIT,
+	      evbit:	{ BIT(EV_KEY) | BIT(EV_ABS) },
+	      keybit:	{ [LONG(BTN_TOUCH)] = BIT(BTN_TOUCH) },
+	      absbit:	{ BIT(ABS_X) | BIT(ABS_Y) },
+	 },/* A tablet like device, at least touch detection, two absolute axes */
+
+	{},/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(input, tsdev_ids);
+
+static struct input_handler tsdev_handler = {
+	event:		tsdev_event,
+	connect:	tsdev_connect,
+	disconnect:	tsdev_disconnect,
+	fops:		&tsdev_fops,
+	minor:		TSDEV_MINOR_BASE,
+	name:		"tsdev",
+	id_table:	tsdev_ids,
+};
+
+static int __init tsdev_init(void)
+{
+	input_register_handler(&tsdev_handler);
+	printk(KERN_INFO "ts: Compaq touchscreen protocol output\n");
+	return 0;
+}
+
+static void __exit tsdev_exit(void)
+{
+	input_unregister_handler(&tsdev_handler);
+}
+
+module_init(tsdev_init);
+module_exit(tsdev_exit);
+
+MODULE_AUTHOR("James Simmons <jsimmons@transvirtual.com>");
+MODULE_DESCRIPTION("Input driver to touchscreen converter");
+MODULE_PARM(xres, "i");
+MODULE_PARM_DESC(xres, "Horizontal screen resolution");
+MODULE_PARM(yres, "i");
+MODULE_PARM_DESC(yres, "Vertical screen resolution");

drivers/usb/input/aiptek.c

@@ -296,9 +296,8 @@ aiptek_probe(struct usb_device *dev, unsigned int ifnum,
 
 	input_register_device(&aiptek->dev);
 
-	printk(KERN_INFO "input%d: %s on usb%d:%d.%d\n",
-	       aiptek->dev.number, aiptek->features->name, dev->bus->busnum,
-	       dev->devnum, ifnum);
+	printk(KERN_INFO "input: %s on usb%d:%d.%d\n",
+	       aiptek->features->name, dev->bus->busnum, dev->devnum, ifnum);
 
 	return aiptek;
 }

include/linux/input.h

@@ -2,7 +2,7 @@
 #define _INPUT_H
 
 /*
- * $Id: input.h,v 1.57 2002/01/02 11:59:56 vojtech Exp $
+ * $Id: input.h,v 1.68 2002/05/31 10:35:49 fsirl Exp $
  *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  */
@@ -322,12 +322,13 @@ struct input_event {
 #define KEY_FINANCE		219
 #define KEY_SPORT		220
 #define KEY_SHOP		221
-
-#define KEY_UNKNOWN		240
-
+#define KEY_ALTERASE		222
+#define KEY_CANCEL		223
 #define KEY_BRIGHTNESSDOWN	224
 #define KEY_BRIGHTNESSUP	225
 
+#define KEY_UNKNOWN		240
+
 #define BTN_MISC		0x100
 #define BTN_0			0x100
 #define BTN_1			0x101
@@ -394,6 +395,10 @@ struct input_event {
 #define BTN_STYLUS		0x14b
 #define BTN_STYLUS2		0x14c
 
+#define BTN_WHEEL		0x150
+#define BTN_GEAR_DOWN		0x150
+#define BTN_GEAR_UP		0x151
+
 #define KEY_MAX			0x1ff
 
 /*
@@ -514,23 +519,19 @@ struct input_event {
  * Structures used in ioctls to upload effects to a device
  * The first structures are not passed directly by using ioctls.
  * They are sub-structures of the actually sent structure (called ff_effect)
- *
- * Ranges:
- *  0 <= __u16 <= 65535
- *  -32767 <= __s16 <= +32767     ! Not -32768 for lower bound !
  */
 
 struct ff_replay {
-	__u16 length;		/* Duration of an effect in ms. All other times are also expressed in ms */
-	__u16 delay;		/* Time to wait before to start playing an effect */
+	__u16 length; /* Duration of an effect in ms. All other times are also expressed in ms */
+	__u16 delay;  /* Time to wait before to start playing an effect */
 };
 
 struct ff_trigger {
-	__u16 button;		/* Number of button triggering an effect */
-	__u16 interval;		/* Time to wait before an effect can be re-triggered (ms) */
+	__u16 button;   /* Number of button triggering an effect */
+	__u16 interval; /* Time to wait before an effect can be re-triggered (ms) */
 };
 
-struct ff_shape {
+struct ff_envelope {
 	__u16 attack_length;	/* Duration of attack (ms) */
 	__u16 attack_level;	/* Level at beginning of attack */
 	__u16 fade_length;	/* Duration of fade (ms) */
@@ -539,41 +540,56 @@ struct ff_shape {
 
 /* FF_CONSTANT */
 struct ff_constant_effect {
-	__s16 level;		/* Strength of effect. Negative values are OK */
-	struct ff_shape shape;
+	__s16 level;	    /* Strength of effect. Negative values are OK */
+	struct ff_envelope envelope;
 };
 
-/* FF_SPRING of FF_FRICTION */
-struct ff_interactive_effect {
-/* Axis along which effect must be created. If null, the field named direction
- * is used
- * It is a bit array (ie to enable axes X and Y, use BIT(ABS_X) | BIT(ABS_Y)
- * It overrides the value of ff_effect::direction, which is used only if
- * axis == 0
- */
-	__u16 axis;
+/* FF_RAMP */
+struct ff_ramp_effect {
+	__s16 start_level;
+	__s16 end_level;
+	struct ff_envelope envelope;
+};
 
+/* FF_SPRING of FF_FRICTION */
+struct ff_condition_effect {
 	__u16 right_saturation; /* Max level when joystick is on the right */
-	__u16 left_saturation;	/* Max level when joystick in on the left */
+	__u16 left_saturation;  /* Max level when joystick in on the left */
 
 	__s16 right_coeff;	/* Indicates how fast the force grows when the
 				   joystick moves to the right */
 	__s16 left_coeff;	/* Same for left side */
 
-	__u16 deadband;		/* Size of area where no force is produced */
-	__s16 center;		/* Position of dead dead zone */
+	__u16 deadband;	/* Size of area where no force is produced */
+	__s16 center;	/* Position of dead zone */
 
 };
 
 /* FF_PERIODIC */
 struct ff_periodic_effect {
-	__u16 waveform;		/* Kind of wave (sine, square...) */
-	__u16 period;		/* in ms */
+	__u16 waveform;	/* Kind of wave (sine, square...) */
+	__u16 period;	/* in ms */
 	__s16 magnitude;	/* Peak value */
-	__s16 offset;		/* Mean value of wave (roughly) */
+	__s16 offset;	/* Mean value of wave (roughly) */
 	__u16 phase;		/* 'Horizontal' shift */
 
-	struct ff_shape shape;
+	struct ff_envelope envelope;
+
+/* Only used if waveform == FF_CUSTOM */
+	__u32 custom_len;	/* Number of samples  */	
+	__s16 *custom_data;	/* Buffer of samples */
+/* Note: the data pointed by custom_data is copied by the driver. You can
+ * therefore dispose of the memory after the upload/update */
+};
+
+/* FF_RUMBLE */
+/* Some rumble pads have two motors of different weight.
+   strong_magnitude represents the magnitude of the vibration generated
+   by the heavy motor.
+*/
+struct ff_rumble_effect {
+	__u16 strong_magnitude;  /* Magnitude of the heavy motor */
+	__u16 weak_magnitude;    /* Magnitude of the light one */
 };
 
 /*
@@ -598,26 +614,13 @@ struct ff_effect {
 
 	union {
 		struct ff_constant_effect constant;
+		struct ff_ramp_effect ramp;
 		struct ff_periodic_effect periodic;
-		struct ff_interactive_effect interactive;
+		struct ff_condition_effect condition[2]; /* One for each axis */
+		struct ff_rumble_effect rumble;
 	} u;
 };
 
-/*
- * Buttons that can trigger effects. Use for example FF_BTN(BTN_TRIGGER) to
- * access the bitmap.
- */
-
-#define FF_BTN(x)	((x) - BTN_MISC + FF_BTN_OFFSET)
-#define FF_BTN_OFFSET	0x00
-
-/*
- * Force feedback axis mappings. Use FF_ABS() to access the bitmap.
- */
-
-#define FF_ABS(x)	((x) + FF_ABS_OFFSET)
-#define FF_ABS_OFFSET	0x40
-
 /*
  * Force feedback effect types
  */
@@ -627,6 +630,9 @@ struct ff_effect {
 #define FF_CONSTANT	0x52
 #define FF_SPRING	0x53
 #define FF_FRICTION	0x54
+#define FF_DAMPER	0x55
+#define FF_INERTIA	0x56
+#define FF_RAMP		0x57
 
 /*
  * Force feedback periodic effect types
@@ -668,8 +674,6 @@ struct input_dev {
 	char *name;
 	char *phys;
 	char *uniq;
-	int number;
-
 	unsigned short idbus;
 	unsigned short idvendor;
 	unsigned short idproduct;
@@ -707,8 +711,6 @@ struct input_dev {
 	int absfuzz[ABS_MAX + 1];
 	int absflat[ABS_MAX + 1];
 
-	int only_one_writer;
-
 	int (*open)(struct input_dev *dev);
 	void (*close)(struct input_dev *dev);
 	int (*accept)(struct input_dev *dev, struct file *file);