Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
1GbE Intel Wired LAN Driver Updates 2020-06-29

This series contains updates to only the igc driver.

Sasha added Energy Efficient Ethernet (EEE) support and Latency Tolerance
Reporting (LTR) support for the igc driver. Added Low Power Idle (LPI)
counters and cleaned up unused TCP segmentation counters. Removed
igc_power_down_link() and call igc_power_down_phy_copper_base()
directly. Removed unneeded copper media check.

Andre cleaned up timestamping by removing un-supported features and
duplicate code for i225. Fixed the timestamp check on the proper flag
instead of the skb for pending transmit timestamps. Refactored
igc_ptp_set_timestamp_mode() to simply the flow.

v2: Removed the log message in patch 1 as suggested by David Miller.
    Note: The locking issue Jakub Kicinski saw in patch 5, currently
    exists in the current net-next tree, so Andre will resolve the
    locking issue in a follow-on patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/igc/igc.h

@@ -117,6 +117,9 @@ struct igc_ring {
 struct igc_adapter {
 	struct net_device *netdev;
 
+	struct ethtool_eee eee;
+	u16 eee_advert;
+
 	unsigned long state;
 	unsigned int flags;
 	unsigned int num_q_vectors;
@@ -207,8 +210,6 @@ struct igc_adapter {
 	struct sk_buff *ptp_tx_skb;
 	struct hwtstamp_config tstamp_config;
 	unsigned long ptp_tx_start;
-	unsigned long last_rx_ptp_check;
-	unsigned long last_rx_timestamp;
 	unsigned int ptp_flags;
 	/* System time value lock */
 	spinlock_t tmreg_lock;
@@ -255,6 +256,7 @@ extern char igc_driver_name[];
 #define IGC_FLAG_MEDIA_RESET		BIT(10)
 #define IGC_FLAG_MAS_ENABLE		BIT(12)
 #define IGC_FLAG_HAS_MSIX		BIT(13)
+#define IGC_FLAG_EEE			BIT(14)
 #define IGC_FLAG_VLAN_PROMISC		BIT(15)
 #define IGC_FLAG_RX_LEGACY		BIT(16)
 #define IGC_FLAG_TSN_QBV_ENABLED	BIT(17)
@@ -545,7 +547,6 @@ void igc_ptp_init(struct igc_adapter *adapter);
 void igc_ptp_reset(struct igc_adapter *adapter);
 void igc_ptp_suspend(struct igc_adapter *adapter);
 void igc_ptp_stop(struct igc_adapter *adapter);
-void igc_ptp_rx_rgtstamp(struct igc_q_vector *q_vector, struct sk_buff *skb);
 void igc_ptp_rx_pktstamp(struct igc_q_vector *q_vector, void *va,
 			 struct sk_buff *skb);
 int igc_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr);

drivers/net/ethernet/intel/igc/igc_defines.h

@@ -323,7 +323,6 @@
 
 /* Advanced Receive Descriptor bit definitions */
 #define IGC_RXDADV_STAT_TSIP	0x08000 /* timestamp in packet */
-#define IGC_RXDADV_STAT_TS	0x10000 /* Pkt was time stamped */
 
 #define IGC_RXDEXT_STATERR_CE		0x01000000
 #define IGC_RXDEXT_STATERR_SE		0x02000000
@@ -384,7 +383,6 @@
 #define IGC_FTQF_MASK_PROTO_BP	0x10000000
 
 /* Time Sync Receive Control bit definitions */
-#define IGC_TSYNCRXCTL_VALID		0x00000001  /* Rx timestamp valid */
 #define IGC_TSYNCRXCTL_TYPE_MASK	0x0000000E  /* Rx type mask */
 #define IGC_TSYNCRXCTL_TYPE_L2_V2	0x00
 #define IGC_TSYNCRXCTL_TYPE_L4_V1	0x02
@@ -511,4 +509,41 @@
 /* Maximum size of the MTA register table in all supported adapters */
 #define MAX_MTA_REG			128
 
+/* EEE defines */
+#define IGC_IPCNFG_EEE_2_5G_AN		0x00000010 /* IPCNFG EEE Ena 2.5G AN */
+#define IGC_IPCNFG_EEE_1G_AN		0x00000008 /* IPCNFG EEE Ena 1G AN */
+#define IGC_IPCNFG_EEE_100M_AN		0x00000004 /* IPCNFG EEE Ena 100M AN */
+#define IGC_EEER_EEE_NEG		0x20000000 /* EEE capability nego */
+#define IGC_EEER_TX_LPI_EN		0x00010000 /* EEER Tx LPI Enable */
+#define IGC_EEER_RX_LPI_EN		0x00020000 /* EEER Rx LPI Enable */
+#define IGC_EEER_LPI_FC			0x00040000 /* EEER Ena on Flow Cntrl */
+#define IGC_EEE_SU_LPI_CLK_STP		0x00800000 /* EEE LPI Clock Stop */
+
+/* LTR defines */
+#define IGC_LTRC_EEEMS_EN		0x00000020 /* Enable EEE LTR max send */
+#define IGC_RXPBS_SIZE_I225_MASK	0x0000003F /* Rx packet buffer size */
+#define IGC_TW_SYSTEM_1000_MASK		0x000000FF
+/* Minimum time for 100BASE-T where no data will be transmit following move out
+ * of EEE LPI Tx state
+ */
+#define IGC_TW_SYSTEM_100_MASK		0x0000FF00
+#define IGC_TW_SYSTEM_100_SHIFT		8
+#define IGC_DMACR_DMAC_EN		0x80000000 /* Enable DMA Coalescing */
+#define IGC_DMACR_DMACTHR_MASK		0x00FF0000
+#define IGC_DMACR_DMACTHR_SHIFT		16
+/* Reg val to set scale to 1024 nsec */
+#define IGC_LTRMINV_SCALE_1024		2
+/* Reg val to set scale to 32768 nsec */
+#define IGC_LTRMINV_SCALE_32768		3
+/* Reg val to set scale to 1024 nsec */
+#define IGC_LTRMAXV_SCALE_1024		2
+/* Reg val to set scale to 32768 nsec */
+#define IGC_LTRMAXV_SCALE_32768		3
+#define IGC_LTRMINV_LTRV_MASK		0x000003FF /* LTR minimum value */
+#define IGC_LTRMAXV_LTRV_MASK		0x000003FF /* LTR maximum value */
+#define IGC_LTRMINV_LSNP_REQ		0x00008000 /* LTR Snoop Requirement */
+#define IGC_LTRMINV_SCALE_SHIFT		10
+#define IGC_LTRMAXV_LSNP_REQ		0x00008000 /* LTR Snoop Requirement */
+#define IGC_LTRMAXV_SCALE_SHIFT		10
+
 #endif /* _IGC_DEFINES_H_ */

drivers/net/ethernet/intel/igc/igc_ethtool.c

@@ -4,6 +4,7 @@
 /* ethtool support for igc */
 #include <linux/if_vlan.h>
 #include <linux/pm_runtime.h>
+#include <linux/mdio.h>
 
 #include "igc.h"
 #include "igc_diag.h"
@@ -1548,6 +1549,98 @@ static int igc_ethtool_set_priv_flags(struct net_device *netdev, u32 priv_flags)
 	return 0;
 }
 
+static int igc_ethtool_get_eee(struct net_device *netdev,
+			       struct ethtool_eee *edata)
+{
+	struct igc_adapter *adapter = netdev_priv(netdev);
+	struct igc_hw *hw = &adapter->hw;
+	u32 eeer;
+
+	if (hw->dev_spec._base.eee_enable)
+		edata->advertised =
+			mmd_eee_adv_to_ethtool_adv_t(adapter->eee_advert);
+
+	*edata = adapter->eee;
+	edata->supported = SUPPORTED_Autoneg;
+
+	eeer = rd32(IGC_EEER);
+
+	/* EEE status on negotiated link */
+	if (eeer & IGC_EEER_EEE_NEG)
+		edata->eee_active = true;
+
+	if (eeer & IGC_EEER_TX_LPI_EN)
+		edata->tx_lpi_enabled = true;
+
+	edata->eee_enabled = hw->dev_spec._base.eee_enable;
+
+	edata->advertised = SUPPORTED_Autoneg;
+	edata->lp_advertised = SUPPORTED_Autoneg;
+
+	/* Report correct negotiated EEE status for devices that
+	 * wrongly report EEE at half-duplex
+	 */
+	if (adapter->link_duplex == HALF_DUPLEX) {
+		edata->eee_enabled = false;
+		edata->eee_active = false;
+		edata->tx_lpi_enabled = false;
+		edata->advertised &= ~edata->advertised;
+	}
+
+	return 0;
+}
+
+static int igc_ethtool_set_eee(struct net_device *netdev,
+			       struct ethtool_eee *edata)
+{
+	struct igc_adapter *adapter = netdev_priv(netdev);
+	struct igc_hw *hw = &adapter->hw;
+	struct ethtool_eee eee_curr;
+	s32 ret_val;
+
+	memset(&eee_curr, 0, sizeof(struct ethtool_eee));
+
+	ret_val = igc_ethtool_get_eee(netdev, &eee_curr);
+	if (ret_val) {
+		netdev_err(netdev,
+			   "Problem setting EEE advertisement options\n");
+		return -EINVAL;
+	}
+
+	if (eee_curr.eee_enabled) {
+		if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) {
+			netdev_err(netdev,
+				   "Setting EEE tx-lpi is not supported\n");
+			return -EINVAL;
+		}
+
+		/* Tx LPI timer is not implemented currently */
+		if (edata->tx_lpi_timer) {
+			netdev_err(netdev,
+				   "Setting EEE Tx LPI timer is not supported\n");
+			return -EINVAL;
+		}
+	} else if (!edata->eee_enabled) {
+		netdev_err(netdev,
+			   "Setting EEE options are not supported with EEE disabled\n");
+		return -EINVAL;
+	}
+
+	adapter->eee_advert = ethtool_adv_to_mmd_eee_adv_t(edata->advertised);
+	if (hw->dev_spec._base.eee_enable != edata->eee_enabled) {
+		hw->dev_spec._base.eee_enable = edata->eee_enabled;
+		adapter->flags |= IGC_FLAG_EEE;
+
+		/* reset link */
+		if (netif_running(netdev))
+			igc_reinit_locked(adapter);
+		else
+			igc_reset(adapter);
+	}
+
+	return 0;
+}
+
 static int igc_ethtool_begin(struct net_device *netdev)
 {
 	struct igc_adapter *adapter = netdev_priv(netdev);
@@ -1829,6 +1922,8 @@ static const struct ethtool_ops igc_ethtool_ops = {
 	.set_channels		= igc_ethtool_set_channels,
 	.get_priv_flags		= igc_ethtool_get_priv_flags,
 	.set_priv_flags		= igc_ethtool_set_priv_flags,
+	.get_eee		= igc_ethtool_get_eee,
+	.set_eee		= igc_ethtool_set_eee,
 	.begin			= igc_ethtool_begin,
 	.complete		= igc_ethtool_complete,
 	.get_link_ksettings	= igc_ethtool_get_link_ksettings,

drivers/net/ethernet/intel/igc/igc_hw.h

@@ -191,6 +191,7 @@ struct igc_fc_info {
 
 struct igc_dev_spec_base {
 	bool clear_semaphore_once;
+	bool eee_enable;
 };
 
 struct igc_hw {

drivers/net/ethernet/intel/igc/igc_i225.c

@@ -488,3 +488,159 @@ s32 igc_init_nvm_params_i225(struct igc_hw *hw)
 	}
 	return 0;
 }
+
+/**
+ *  igc_set_eee_i225 - Enable/disable EEE support
+ *  @hw: pointer to the HW structure
+ *  @adv2p5G: boolean flag enabling 2.5G EEE advertisement
+ *  @adv1G: boolean flag enabling 1G EEE advertisement
+ *  @adv100M: boolean flag enabling 100M EEE advertisement
+ *
+ *  Enable/disable EEE based on setting in dev_spec structure.
+ **/
+s32 igc_set_eee_i225(struct igc_hw *hw, bool adv2p5G, bool adv1G,
+		     bool adv100M)
+{
+	u32 ipcnfg, eeer;
+
+	ipcnfg = rd32(IGC_IPCNFG);
+	eeer = rd32(IGC_EEER);
+
+	/* enable or disable per user setting */
+	if (hw->dev_spec._base.eee_enable) {
+		u32 eee_su = rd32(IGC_EEE_SU);
+
+		if (adv100M)
+			ipcnfg |= IGC_IPCNFG_EEE_100M_AN;
+		else
+			ipcnfg &= ~IGC_IPCNFG_EEE_100M_AN;
+
+		if (adv1G)
+			ipcnfg |= IGC_IPCNFG_EEE_1G_AN;
+		else
+			ipcnfg &= ~IGC_IPCNFG_EEE_1G_AN;
+
+		if (adv2p5G)
+			ipcnfg |= IGC_IPCNFG_EEE_2_5G_AN;
+		else
+			ipcnfg &= ~IGC_IPCNFG_EEE_2_5G_AN;
+
+		eeer |= (IGC_EEER_TX_LPI_EN | IGC_EEER_RX_LPI_EN |
+			 IGC_EEER_LPI_FC);
+
+		/* This bit should not be set in normal operation. */
+		if (eee_su & IGC_EEE_SU_LPI_CLK_STP)
+			hw_dbg("LPI Clock Stop Bit should not be set!\n");
+	} else {
+		ipcnfg &= ~(IGC_IPCNFG_EEE_2_5G_AN | IGC_IPCNFG_EEE_1G_AN |
+			    IGC_IPCNFG_EEE_100M_AN);
+		eeer &= ~(IGC_EEER_TX_LPI_EN | IGC_EEER_RX_LPI_EN |
+			  IGC_EEER_LPI_FC);
+	}
+	wr32(IGC_IPCNFG, ipcnfg);
+	wr32(IGC_EEER, eeer);
+	rd32(IGC_IPCNFG);
+	rd32(IGC_EEER);
+
+	return IGC_SUCCESS;
+}
+
+/* igc_set_ltr_i225 - Set Latency Tolerance Reporting thresholds
+ * @hw: pointer to the HW structure
+ * @link: bool indicating link status
+ *
+ * Set the LTR thresholds based on the link speed (Mbps), EEE, and DMAC
+ * settings, otherwise specify that there is no LTR requirement.
+ */
+s32 igc_set_ltr_i225(struct igc_hw *hw, bool link)
+{
+	u32 tw_system, ltrc, ltrv, ltr_min, ltr_max, scale_min, scale_max;
+	u16 speed, duplex;
+	s32 size;
+
+	/* If we do not have link, LTR thresholds are zero. */
+	if (link) {
+		hw->mac.ops.get_speed_and_duplex(hw, &speed, &duplex);
+
+		/* Check if using copper interface with EEE enabled or if the
+		 * link speed is 10 Mbps.
+		 */
+		if (hw->dev_spec._base.eee_enable &&
+		    speed != SPEED_10) {
+			/* EEE enabled, so send LTRMAX threshold. */
+			ltrc = rd32(IGC_LTRC) |
+			       IGC_LTRC_EEEMS_EN;
+			wr32(IGC_LTRC, ltrc);
+
+			/* Calculate tw_system (nsec). */
+			if (speed == SPEED_100) {
+				tw_system = ((rd32(IGC_EEE_SU) &
+					     IGC_TW_SYSTEM_100_MASK) >>
+					     IGC_TW_SYSTEM_100_SHIFT) * 500;
+			} else {
+				tw_system = (rd32(IGC_EEE_SU) &
+					     IGC_TW_SYSTEM_1000_MASK) * 500;
+			}
+		} else {
+			tw_system = 0;
+		}
+
+		/* Get the Rx packet buffer size. */
+		size = rd32(IGC_RXPBS) &
+		       IGC_RXPBS_SIZE_I225_MASK;
+
+		/* Calculations vary based on DMAC settings. */
+		if (rd32(IGC_DMACR) & IGC_DMACR_DMAC_EN) {
+			size -= (rd32(IGC_DMACR) &
+				 IGC_DMACR_DMACTHR_MASK) >>
+				 IGC_DMACR_DMACTHR_SHIFT;
+			/* Convert size to bits. */
+			size *= 1024 * 8;
+		} else {
+			/* Convert size to bytes, subtract the MTU, and then
+			 * convert the size to bits.
+			 */
+			size *= 1024;
+			size *= 8;
+		}
+
+		if (size < 0) {
+			hw_dbg("Invalid effective Rx buffer size %d\n",
+			       size);
+			return -IGC_ERR_CONFIG;
+		}
+
+		/* Calculate the thresholds. Since speed is in Mbps, simplify
+		 * the calculation by multiplying size/speed by 1000 for result
+		 * to be in nsec before dividing by the scale in nsec. Set the
+		 * scale such that the LTR threshold fits in the register.
+		 */
+		ltr_min = (1000 * size) / speed;
+		ltr_max = ltr_min + tw_system;
+		scale_min = (ltr_min / 1024) < 1024 ? IGC_LTRMINV_SCALE_1024 :
+			    IGC_LTRMINV_SCALE_32768;
+		scale_max = (ltr_max / 1024) < 1024 ? IGC_LTRMAXV_SCALE_1024 :
+			    IGC_LTRMAXV_SCALE_32768;
+		ltr_min /= scale_min == IGC_LTRMINV_SCALE_1024 ? 1024 : 32768;
+		ltr_min -= 1;
+		ltr_max /= scale_max == IGC_LTRMAXV_SCALE_1024 ? 1024 : 32768;
+		ltr_max -= 1;
+
+		/* Only write the LTR thresholds if they differ from before. */
+		ltrv = rd32(IGC_LTRMINV);
+		if (ltr_min != (ltrv & IGC_LTRMINV_LTRV_MASK)) {
+			ltrv = IGC_LTRMINV_LSNP_REQ | ltr_min |
+			       (scale_min << IGC_LTRMINV_SCALE_SHIFT);
+			wr32(IGC_LTRMINV, ltrv);
+		}
+
+		ltrv = rd32(IGC_LTRMAXV);
+		if (ltr_max != (ltrv & IGC_LTRMAXV_LTRV_MASK)) {
+			ltrv = IGC_LTRMAXV_LSNP_REQ | ltr_max |
+			       (scale_min << IGC_LTRMAXV_SCALE_SHIFT);
+			wr32(IGC_LTRMAXV, ltrv);
+		}
+	}
+
+	return IGC_SUCCESS;
+}

drivers/net/ethernet/intel/igc/igc_i225.h

@@ -9,5 +9,8 @@ void igc_release_swfw_sync_i225(struct igc_hw *hw, u16 mask);
 
 s32 igc_init_nvm_params_i225(struct igc_hw *hw);
 bool igc_get_flash_presence_i225(struct igc_hw *hw);
+s32 igc_set_eee_i225(struct igc_hw *hw, bool adv2p5G, bool adv1G,
+		     bool adv100M);
+s32 igc_set_ltr_i225(struct igc_hw *hw, bool link);
 
 #endif

drivers/net/ethernet/intel/igc/igc_mac.c

@@ -289,7 +289,6 @@ void igc_clear_hw_cntrs_base(struct igc_hw *hw)
 	rd32(IGC_TNCRS);
 	rd32(IGC_HTDPMC);
 	rd32(IGC_TSCTC);
-	rd32(IGC_TSCTFC);
 
 	rd32(IGC_MGTPRC);
 	rd32(IGC_MGTPDC);
@@ -307,6 +306,8 @@ void igc_clear_hw_cntrs_base(struct igc_hw *hw)
 	rd32(IGC_ICRXDMTC);
 
 	rd32(IGC_RPTHC);
+	rd32(IGC_TLPIC);
+	rd32(IGC_RLPIC);
 	rd32(IGC_HGPTC);
 	rd32(IGC_HGORCL);
 	rd32(IGC_HGORCH);
@@ -417,6 +418,11 @@ s32 igc_check_for_copper_link(struct igc_hw *hw)
 		hw_dbg("Error configuring flow control\n");
 
 out:
+	/* Now that we are aware of our link settings, we can set the LTR
+	 * thresholds.
+	 */
+	ret_val = igc_set_ltr_i225(hw, link);
+
 	return ret_val;
 }
 
@@ -462,10 +468,8 @@ s32 igc_config_fc_after_link_up(struct igc_hw *hw)
 	 * so we had to force link.  In this case, we need to force the
 	 * configuration of the MAC to match the "fc" parameter.
 	 */
-	if (mac->autoneg_failed) {
-		if (hw->phy.media_type == igc_media_type_copper)
+	if (mac->autoneg_failed)
 		ret_val = igc_force_mac_fc(hw);
-	}
 
 	if (ret_val) {
 		hw_dbg("Error forcing flow control settings\n");
@@ -477,7 +481,7 @@ s32 igc_config_fc_after_link_up(struct igc_hw *hw)
 	 * has completed, and if so, how the PHY and link partner has
 	 * flow control configured.
 	 */
-	if (hw->phy.media_type == igc_media_type_copper && mac->autoneg) {
+	if (mac->autoneg) {
 		/* Read the MII Status Register and check to see if AutoNeg
 		 * has completed.  We read this twice because this reg has
 		 * some "sticky" (latched) bits.

drivers/net/ethernet/intel/igc/igc_main.c

@@ -61,16 +61,6 @@ enum latency_range {
 	latency_invalid = 255
 };
 
-/**
- * igc_power_down_link - Power down the phy/serdes link
- * @adapter: address of board private structure
- */
-static void igc_power_down_link(struct igc_adapter *adapter)
-{
-	if (adapter->hw.phy.media_type == igc_media_type_copper)
-		igc_power_down_phy_copper_base(&adapter->hw);
-}
-
 void igc_reset(struct igc_adapter *adapter)
 {
 	struct net_device *dev = adapter->netdev;
@@ -102,8 +92,11 @@ void igc_reset(struct igc_adapter *adapter)
 	if (hw->mac.ops.init_hw(hw))
 		netdev_err(dev, "Error on hardware initialization\n");
 
+	/* Re-establish EEE setting */
+	igc_set_eee_i225(hw, true, true, true);
+
 	if (!netif_running(adapter->netdev))
-		igc_power_down_link(adapter);
+		igc_power_down_phy_copper_base(&adapter->hw);
 
 	/* Re-enable PTP, where applicable. */
 	igc_ptp_reset(adapter);
@@ -122,7 +115,6 @@ static void igc_power_up_link(struct igc_adapter *adapter)
 {
 	igc_reset_phy(&adapter->hw);
 
-	if (adapter->hw.phy.media_type == igc_media_type_copper)
 	igc_power_up_phy_copper(&adapter->hw);
 
 	igc_setup_link(&adapter->hw);
@@ -1476,9 +1468,9 @@ static inline void igc_rx_hash(struct igc_ring *ring,
  * @rx_desc: pointer to the EOP Rx descriptor
  * @skb: pointer to current skb being populated
  *
- * This function checks the ring, descriptor, and packet information in
- * order to populate the hash, checksum, VLAN, timestamp, protocol, and
- * other fields within the skb.
+ * This function checks the ring, descriptor, and packet information in order
+ * to populate the hash, checksum, VLAN, protocol, and other fields within the
+ * skb.
  */
 static void igc_process_skb_fields(struct igc_ring *rx_ring,
 				   union igc_adv_rx_desc *rx_desc,
@@ -1488,10 +1480,6 @@ static void igc_process_skb_fields(struct igc_ring *rx_ring,
 
 	igc_rx_checksum(rx_ring, rx_desc, skb);
 
-	if (igc_test_staterr(rx_desc, IGC_RXDADV_STAT_TS) &&
-	    !igc_test_staterr(rx_desc, IGC_RXDADV_STAT_TSIP))
-		igc_ptp_rx_rgtstamp(rx_ring->q_vector, skb);
-
 	skb_record_rx_queue(skb, rx_ring->queue_index);
 
 	skb->protocol = eth_type_trans(skb, rx_ring->netdev);
@@ -1972,7 +1960,7 @@ static int igc_clean_rx_irq(struct igc_q_vector *q_vector, const int budget)
 		/* probably a little skewed due to removing CRC */
 		total_bytes += skb->len;
 
-		/* populate checksum, timestamp, VLAN, and protocol */
+		/* populate checksum, VLAN, and protocol */
 		igc_process_skb_fields(rx_ring, rx_desc, skb);
 
 		napi_gro_receive(&q_vector->napi, skb);
@@ -3741,7 +3729,6 @@ void igc_update_stats(struct igc_adapter *adapter)
 	adapter->stats.algnerrc += rd32(IGC_ALGNERRC);
 
 	adapter->stats.tsctc += rd32(IGC_TSCTC);
-	adapter->stats.tsctfc += rd32(IGC_TSCTFC);
 
 	adapter->stats.iac += rd32(IGC_IAC);
 	adapter->stats.icrxoc += rd32(IGC_ICRXOC);
@@ -4252,6 +4239,15 @@ static void igc_watchdog_task(struct work_struct *work)
 				    (ctrl & IGC_CTRL_RFCE) ?  "RX" :
 				    (ctrl & IGC_CTRL_TFCE) ?  "TX" : "None");
 
+			/* disable EEE if enabled */
+			if ((adapter->flags & IGC_FLAG_EEE) &&
+			    adapter->link_duplex == HALF_DUPLEX) {
+				netdev_info(netdev,
+					    "EEE Disabled: unsupported at half duplex. Re-enable using ethtool when at full duplex\n");
+				adapter->hw.dev_spec._base.eee_enable = false;
+				adapter->flags &= ~IGC_FLAG_EEE;
+			}
+
 			/* check if SmartSpeed worked */
 			igc_check_downshift(hw);
 			if (phy->speed_downgraded)
@@ -4608,7 +4604,7 @@ static int __igc_open(struct net_device *netdev, bool resuming)
 	igc_free_irq(adapter);
 err_req_irq:
 	igc_release_hw_control(adapter);
-	igc_power_down_link(adapter);
+	igc_power_down_phy_copper_base(&adapter->hw);
 	igc_free_all_rx_resources(adapter);
 err_setup_rx:
 	igc_free_all_tx_resources(adapter);
@@ -5182,6 +5178,10 @@ static int igc_probe(struct pci_dev *pdev,
 	netdev_info(netdev, "MAC: %pM\n", netdev->dev_addr);
 
 	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
+	/* Disable EEE for internal PHY devices */
+	hw->dev_spec._base.eee_enable = false;
+	adapter->flags &= ~IGC_FLAG_EEE;
+	igc_set_eee_i225(hw, false, false, false);
 
 	pm_runtime_put_noidle(&pdev->dev);
 
@@ -5302,7 +5302,7 @@ static int __igc_shutdown(struct pci_dev *pdev, bool *enable_wake,
 
 	wake = wufc || adapter->en_mng_pt;
 	if (!wake)
-		igc_power_down_link(adapter);
+		igc_power_down_phy_copper_base(&adapter->hw);
 	else
 		igc_power_up_link(adapter);
 

drivers/net/ethernet/intel/igc/igc_regs.h

@@ -181,13 +181,14 @@
 #define IGC_MPTC	0x040F0  /* Multicast Packets Tx Count - R/clr */
 #define IGC_BPTC	0x040F4  /* Broadcast Packets Tx Count - R/clr */
 #define IGC_TSCTC	0x040F8  /* TCP Segmentation Context Tx - R/clr */
-#define IGC_TSCTFC	0x040FC  /* TCP Segmentation Context Tx Fail - R/clr */
 #define IGC_IAC		0x04100  /* Interrupt Assertion Count */
 #define IGC_ICTXPTC	0x0410C  /* Interrupt Cause Tx Pkt Timer Expire Count */
 #define IGC_ICTXATC	0x04110  /* Interrupt Cause Tx Abs Timer Expire Count */
 #define IGC_ICTXQEC	0x04118  /* Interrupt Cause Tx Queue Empty Count */
 #define IGC_ICTXQMTC	0x0411C  /* Interrupt Cause Tx Queue Min Thresh Count */
 #define IGC_RPTHC	0x04104  /* Rx Packets To Host */
+#define IGC_TLPIC	0x04148  /* EEE Tx LPI Count */
+#define IGC_RLPIC	0x0414C  /* EEE Rx LPI Count */
 #define IGC_HGPTC	0x04118  /* Host Good Packets Tx Count */
 #define IGC_RXDMTC	0x04120  /* Rx Descriptor Minimum Threshold Count */
 #define IGC_HGORCL	0x04128  /* Host Good Octets Received Count Low */
@@ -228,8 +229,6 @@
 #define IGC_SYSTIMR	0x0B6F8  /* System time register Residue */
 #define IGC_TIMINCA	0x0B608  /* Increment attributes register - RW */
 
-#define IGC_RXSTMPL	0x0B624  /* Rx timestamp Low - RO */
-#define IGC_RXSTMPH	0x0B628  /* Rx timestamp High - RO */
 #define IGC_TXSTMPL	0x0B618  /* Tx timestamp value Low - RO */
 #define IGC_TXSTMPH	0x0B61C  /* Tx timestamp value High - RO */
 
@@ -248,6 +247,17 @@
 /* Wake Up packet memory */
 #define IGC_WUPM_REG(_i)	(0x05A00 + ((_i) * 4))
 
+/* Energy Efficient Ethernet "EEE" registers */
+#define IGC_EEER	0x0E30 /* Energy Efficient Ethernet "EEE"*/
+#define IGC_IPCNFG	0x0E38 /* Internal PHY Configuration */
+#define IGC_EEE_SU	0x0E34 /* EEE Setup */
+
+/* LTR registers */
+#define IGC_LTRC	0x01A0 /* Latency Tolerance Reporting Control */
+#define IGC_DMACR	0x02508 /* DMA Coalescing Control Register */
+#define IGC_LTRMINV	0x5BB0 /* LTR Minimum Value */
+#define IGC_LTRMAXV	0x5BB4 /* LTR Maximum Value */
+
 /* forward declaration */
 struct igc_hw;
 u32 igc_rd32(struct igc_hw *hw, u32 reg);