Commit e2664d08 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Merge tag 'iio-for-5.10a-take2' of...

Merge tag 'iio-for-5.10a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanup for IIO in 5.10 cycle, take 2

A few changes to how I write this cover letter.
* Started to use manufacturer prefixes to group changes better.
* Stop list minor formatting etc changes.
* Whilst I appreciate those changes, we don't need to call them out here.

New device support:
* adi,adxrs290
  - New driver for this gyroscope with dt bindings. One fix follows.
* ams,as73211
  - New driver for this colour sensor with dt bindings. Also includes
    docs for XYZ modifiers as used for the CIE colour space. Sysfs docs.
* atlas,atlas-ezo-sensor
  - Support O_2 sensor, includes new modifier for concentration.
  - Support humidity sensor.
* ti,hdc2010
  - New driver support hdc2010 and hdc2080 humidity sensors. Includes dt
    bindings.

Cleanup, minor fixes and features
* core
  - Make the trigger related stub functions static inline, avoiding some build
   warnings.
  - buffer-dmaengine. Allow adjusting bytes_used with residue info.
* dev_error_probe to replace open coded equivalent in many drivers.
* docs and comment fixes
  - Fix some typos, doubled words, capitalisation and punctuation.
* dt binding conversions to yaml
  - lltc,ltc2497
  - lltc,ltc2632
  - maxim,max11100
  - maxim,max1118
  - maxim,max9611
  - microchip,mcp3201
  - microchip,mcp342x (add to trivial devices)
  - ti,adc0832
  - ti,adc108s102
  - ti,adc128s052
  - ti,adc161s626
  - ti,ads8344
  - ti,tlc4541 (includes adding an accidentally dropped original binding doc)
* adi,adi-axi-adc
  - Use kobj_to_dev instead of open coding.
* adi,ad5686
  - Constify iio_chan_spec
* adi,ad8366
  - Add HMC1119 to kconfig help text as the driver supports it.
* adi,ad9523
  - Use devm for reset of probe and drop remove.
* adi,adxl372
  - Tidy up alignment
  - Add OF table
  - Add peak mode support with some docs.
* bosch,bma220 (general tidy up)
  - Fix some return codes.
  - Use read_avail callback rather than open coding attrs.
  - Use dev_get_drvdata rather than dance via to_spi_device()
  - Mark PM functions as __maybe_unused rather than #ifdef fun.
  - Drop ACPI_PTR protections and ifdefs.
  - Tidy up header ordering.
  - BIT and GENMASK
* broadcom,bcm_iproc
  - Drop of_match_ptr protection and switch to mod_devicetable.h
    Part of general move to get this anti-pattern out of IIO.
* melexis,mlx90614
  - Simplify some calculations.
  - Add some kernel_doc
  - Use regmap poll loop rather than open coding.
  - Add extended calibration option.
* sensortec,sx9310, wide ranging set of fixes and cleanups.
  - Document dt-binding.
  - Rename some macros to align better with spec sheet
  - Fix some issues with irq handling.
  - Drop of_match_ptr and ACPI_PTR macros to avoid unused warnings etc.
  - Switch to probe_new
  - Fix memory alignment for iio_push_to_buffers_with_timestamp()
  - Use long for bitmaps to allow use of for_each_bit_set()
  - Use regmap_read_poll instead of opencoding.
  - Simplify error paths
  - Enabled regulators at probe.
  - Use trigger flags from firmware rather than forcing them in the driver.
* ti,adc081c
  - Drop ACPI IDs that are not likely to be official ones and we don't believe
    anyone is using.
* ti,adc108s102
  - Drop CONFIG_OF and of_match_ptr protections.
* ti,adc128s052
  - Drop of_match_ptr protection and include mod_devicetable.h
* ti,dac5571
  - Support powerdown for mutlichannel usecases.
* xpowers,axp20x
  - Convert from OF to generic fw / device properties. Unlikely anyone will
    use this with anything other than devicetree, but this is part of a
    general move across IIO.

* tag 'iio-for-5.10a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (96 commits)
  drivers/iio/humidity/hdc2010.c:305:2-3: Unneeded semicolon
  iio: accel: bma220: Remove unneeded blank lines
  iio: accel: bma220: Use BIT() and GENMASK() macros
  iio: accel: bma220: Group IIO headers together
  iio: accel: bma220: Drop ACPI_PTR() and accompanying ifdeffery
  iio: accel: bma220: Mark PM functions as __maybe_unused
  iio: accel: bma220: Use dev_get_drvdata() directly
  iio: accel: bma220: Convert to use ->read_avail()
  iio: accel: bma220: Fix returned codes from bma220_init(), bma220_deinit()
  dt-bindings: iio: adc: microchip,mcp3201 yaml conversion.
  iio: buffer-dmaengine: adjust `bytes_used` with residue info
  dt-bindings: iio: adc: ti,tlc4541 binding conversion
  dt-bindings: iio: adc: tlc4541 - recover accidentally dropped binding doc
  dt-bindings: iio: adc: ti,ads8344 yaml conversion
  dt-bindings: iio: adc: ti,adc128s052 yaml conversion.
  dt-bindings: iio: adc: ti,adc0832 yaml conversion.
  dt-bindings: iio: adc: ti,adc161s626 yaml conversion.
  dt-bindings: iio: adc: lltc,ltc2497 yaml conversion.
  dt-bindings: iio: adc: ti,adc108s102 yaml conversion
  dt-bindings: trivial-devices: Add mcp342x ADCs and drop separate binding doc.
  ...
parents 76f50ad9 2f0472a1
...@@ -40,6 +40,7 @@ Description: ...@@ -40,6 +40,7 @@ Description:
buffered samples and events for device X. buffered samples and events for device X.
What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency
What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency
What: /sys/bus/iio/devices/triggerX/sampling_frequency What: /sys/bus/iio/devices/triggerX/sampling_frequency
KernelVersion: 2.6.35 KernelVersion: 2.6.35
...@@ -49,12 +50,13 @@ Description: ...@@ -49,12 +50,13 @@ Description:
resulting sampling frequency. In many devices this resulting sampling frequency. In many devices this
parameter has an effect on input filters etc. rather than parameter has an effect on input filters etc. rather than
simply controlling when the input is sampled. As this simply controlling when the input is sampled. As this
effects data ready triggers, hardware buffers and the sysfs affects data ready triggers, hardware buffers and the sysfs
direct access interfaces, it may be found in any of the direct access interfaces, it may be found in any of the
relevant directories. If it effects all of the above relevant directories. If it affects all of the above
then it is to be found in the base device directory. then it is to be found in the base device directory.
What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available
What: /sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available What: /sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
What: /sys/.../iio:deviceX/buffer/sampling_frequency_available What: /sys/.../iio:deviceX/buffer/sampling_frequency_available
What: /sys/bus/iio/devices/triggerX/sampling_frequency_available What: /sys/bus/iio/devices/triggerX/sampling_frequency_available
...@@ -374,6 +376,9 @@ What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale ...@@ -374,6 +376,9 @@ What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale
What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale
What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale
What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale
KernelVersion: 2.6.35 KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org Contact: linux-iio@vger.kernel.org
Description: Description:
...@@ -401,21 +406,21 @@ Description: ...@@ -401,21 +406,21 @@ Description:
Hardware applied calibration offset (assumed to fix production Hardware applied calibration offset (assumed to fix production
inaccuracies). inaccuracies).
What /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
What /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
What /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale
What /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale
What /sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale
What /sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale
What /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
What /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
What /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
What /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
What /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale
What /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
What /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
what /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale
what /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale
What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale
What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_calibscale
...@@ -483,7 +488,8 @@ Description: ...@@ -483,7 +488,8 @@ Description:
If a discrete set of scale values is available, they If a discrete set of scale values is available, they
are listed in this attribute. are listed in this attribute.
What /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain
...@@ -494,6 +500,13 @@ Description: ...@@ -494,6 +500,13 @@ Description:
Hardware applied gain factor. If shared across all channels, Hardware applied gain factor. If shared across all channels,
<type>_hardwaregain is used. <type>_hardwaregain is used.
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain_available
KernelVersion: 5.10
Contact: linux-iio@vger.kernel.org
Description:
Lists all available hardware applied gain factors. Shared across all
channels.
What: /sys/.../in_accel_filter_low_pass_3db_frequency What: /sys/.../in_accel_filter_low_pass_3db_frequency
What: /sys/.../in_magn_filter_low_pass_3db_frequency What: /sys/.../in_magn_filter_low_pass_3db_frequency
What: /sys/.../in_anglvel_filter_low_pass_3db_frequency What: /sys/.../in_anglvel_filter_low_pass_3db_frequency
...@@ -750,9 +763,9 @@ What: /sys/.../events/in_voltageY_raw_thresh_falling_value ...@@ -750,9 +763,9 @@ What: /sys/.../events/in_voltageY_raw_thresh_falling_value
What: /sys/.../events/in_tempY_raw_thresh_rising_value What: /sys/.../events/in_tempY_raw_thresh_rising_value
What: /sys/.../events/in_tempY_raw_thresh_falling_value What: /sys/.../events/in_tempY_raw_thresh_falling_value
What: /sys/.../events/in_illuminance0_thresh_falling_value What: /sys/.../events/in_illuminance0_thresh_falling_value
what: /sys/.../events/in_illuminance0_thresh_rising_value What: /sys/.../events/in_illuminance0_thresh_rising_value
what: /sys/.../events/in_proximity0_thresh_falling_value What: /sys/.../events/in_proximity0_thresh_falling_value
what: /sys/.../events/in_proximity0_thresh_rising_value What: /sys/.../events/in_proximity0_thresh_rising_value
What: /sys/.../events/in_illuminance_thresh_rising_value What: /sys/.../events/in_illuminance_thresh_rising_value
What: /sys/.../events/in_illuminance_thresh_falling_value What: /sys/.../events/in_illuminance_thresh_falling_value
KernelVersion: 2.6.37 KernelVersion: 2.6.37
...@@ -832,11 +845,11 @@ What: /sys/.../events/in_tempY_thresh_rising_hysteresis ...@@ -832,11 +845,11 @@ What: /sys/.../events/in_tempY_thresh_rising_hysteresis
What: /sys/.../events/in_tempY_thresh_falling_hysteresis What: /sys/.../events/in_tempY_thresh_falling_hysteresis
What: /sys/.../events/in_tempY_thresh_either_hysteresis What: /sys/.../events/in_tempY_thresh_either_hysteresis
What: /sys/.../events/in_illuminance0_thresh_falling_hysteresis What: /sys/.../events/in_illuminance0_thresh_falling_hysteresis
what: /sys/.../events/in_illuminance0_thresh_rising_hysteresis What: /sys/.../events/in_illuminance0_thresh_rising_hysteresis
what: /sys/.../events/in_illuminance0_thresh_either_hysteresis What: /sys/.../events/in_illuminance0_thresh_either_hysteresis
what: /sys/.../events/in_proximity0_thresh_falling_hysteresis What: /sys/.../events/in_proximity0_thresh_falling_hysteresis
what: /sys/.../events/in_proximity0_thresh_rising_hysteresis What: /sys/.../events/in_proximity0_thresh_rising_hysteresis
what: /sys/.../events/in_proximity0_thresh_either_hysteresis What: /sys/.../events/in_proximity0_thresh_either_hysteresis
KernelVersion: 3.13 KernelVersion: 3.13
Contact: linux-iio@vger.kernel.org Contact: linux-iio@vger.kernel.org
Description: Description:
...@@ -1013,7 +1026,7 @@ What: /sys/.../events/in_activity_running_thresh_falling_en ...@@ -1013,7 +1026,7 @@ What: /sys/.../events/in_activity_running_thresh_falling_en
KernelVersion: 3.19 KernelVersion: 3.19
Contact: linux-iio@vger.kernel.org Contact: linux-iio@vger.kernel.org
Description: Description:
Enables or disables activitity events. Depending on direction Enables or disables activity events. Depending on direction
an event is generated when sensor ENTERS or LEAVES a given state. an event is generated when sensor ENTERS or LEAVES a given state.
What: /sys/.../events/in_activity_still_thresh_rising_value What: /sys/.../events/in_activity_still_thresh_rising_value
...@@ -1333,6 +1346,7 @@ Description: ...@@ -1333,6 +1346,7 @@ Description:
standardised CIE Erythemal Action Spectrum. UV index values range standardised CIE Erythemal Action Spectrum. UV index values range
from 0 (low) to >=11 (extreme). from 0 (low) to >=11 (extreme).
What: /sys/.../iio:deviceX/in_intensity_integration_time
What: /sys/.../iio:deviceX/in_intensity_red_integration_time What: /sys/.../iio:deviceX/in_intensity_red_integration_time
What: /sys/.../iio:deviceX/in_intensity_green_integration_time What: /sys/.../iio:deviceX/in_intensity_green_integration_time
What: /sys/.../iio:deviceX/in_intensity_blue_integration_time What: /sys/.../iio:deviceX/in_intensity_blue_integration_time
...@@ -1342,7 +1356,8 @@ KernelVersion: 3.12 ...@@ -1342,7 +1356,8 @@ KernelVersion: 3.12
Contact: linux-iio@vger.kernel.org Contact: linux-iio@vger.kernel.org
Description: Description:
This attribute is used to get/set the integration time in This attribute is used to get/set the integration time in
seconds. seconds. If shared across all channels of a given type,
<type>_integration_time is used.
What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time
KernelVersion: 4.0 KernelVersion: 4.0
...@@ -1564,6 +1579,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_concentration_ethanol_raw ...@@ -1564,6 +1579,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_concentration_ethanol_raw
What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_ethanol_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_ethanol_raw
What: /sys/bus/iio/devices/iio:deviceX/in_concentration_h2_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentration_h2_raw
What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_h2_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_h2_raw
What: /sys/bus/iio/devices/iio:deviceX/in_concentration_o2_raw
What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_o2_raw
What: /sys/bus/iio/devices/iio:deviceX/in_concentration_voc_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentration_voc_raw
What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw
KernelVersion: 4.3 KernelVersion: 4.3
...@@ -1740,3 +1757,12 @@ KernelVersion: 5.5 ...@@ -1740,3 +1757,12 @@ KernelVersion: 5.5
Contact: linux-iio@vger.kernel.org Contact: linux-iio@vger.kernel.org
Description: Description:
One of the following thermocouple types: B, E, J, K, N, R, S, T. One of the following thermocouple types: B, E, J, K, N, R, S, T.
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_raw
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_raw
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_raw
KernelVersion: 5.10
Contact: linux-iio@vger.kernel.org
Description:
Unscaled light intensity according to CIE 1931/DIN 5033 color space.
Units after application of scale are nano nanowatts per square meter.
What: /sys/bus/iio/devices/triggerX/name = "adxl372-devX-peak"
KernelVersion:
Contact: linux-iio@vger.kernel.org
Description:
The adxl372 accelerometer kernel module provides an additional trigger,
which sets the device in a mode in which it will record only the peak acceleration
sensed over the set period of time in the events sysfs.
What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw
What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available
KernelVersion: 5.3.8
Contact: linux-iio@vger.kernel.org
Description:
Controls the heater device within the humidity sensor to get
rid of excess condensation.
Valid control values are 0 = OFF, and 1 = ON.
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/lltc,ltc2497.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Linear Technology / Analog Devices LTC2497 ADC
maintainers:
- Michael Hennerich <michael.hennerich@analog.com>
description: |
16bit ADC supporting up to 16 single ended or 8 differential inputs.
I2C interface.
properties:
compatible:
const:
lltc,ltc2497
reg: true
vref-supply: true
"#io-channel-cells":
const: 1
required:
- compatible
- reg
- vref-supply
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
adc@76 {
compatible = "lltc,ltc2497";
reg = <0x76>;
vref-supply = <&ltc2497_reg>;
#io-channel-cells = <1>;
};
};
...
* Linear Technology / Analog Devices LTC2497 ADC
Required properties:
- compatible: Must be "lltc,ltc2497"
- reg: Must contain the ADC I2C address
- vref-supply: The regulator supply for ADC reference voltage
Example:
ltc2497: adc@76 {
compatible = "lltc,ltc2497";
reg = <0x76>;
vref-supply = <&ltc2497_reg>;
};
* Maxim max11100 Analog to Digital Converter (ADC)
Required properties:
- compatible: Should be "maxim,max11100"
- reg: the adc unit address
- vref-supply: phandle to the regulator that provides reference voltage
Optional properties:
- spi-max-frequency: SPI maximum frequency
Example:
max11100: adc@0 {
compatible = "maxim,max11100";
reg = <0>;
vref-supply = <&adc0_vref>;
spi-max-frequency = <240000>;
};
* MAX1117/MAX1118/MAX1119 8-bit, dual-channel ADCs
Required properties:
- compatible: Should be one of
* "maxim,max1117"
* "maxim,max1118"
* "maxim,max1119"
- reg: spi chip select number for the device
- (max1118 only) vref-supply: The regulator supply for ADC reference voltage
Recommended properties:
- spi-max-frequency: Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
Example:
adc@0 {
compatible = "maxim,max1118";
reg = <0>;
vref-supply = <&vdd_supply>;
spi-max-frequency = <1000000>;
};
* Maxim max9611/max9612 current sense amplifier with 12-bits ADC interface
Maxim max9611/max9612 is an high-side current sense amplifier with integrated
12-bits ADC communicating over I2c bus.
The device node for this driver shall be a child of a I2c controller.
Required properties
- compatible: Should be "maxim,max9611" or "maxim,max9612"
- reg: The 7-bits long I2c address of the device
- shunt-resistor-micro-ohms: Value, in micro Ohms, of the current sense shunt
resistor
Example:
&i2c4 {
csa: adc@7c {
compatible = "maxim,max9611";
reg = <0x7c>;
shunt-resistor-micro-ohms = <5000>;
};
};
This device node describes a current sense amplifier sitting on I2c4 bus
with address 0x7c (read address is 0xf9, write address is 0xf8).
A sense resistor of 0,005 Ohm is installed between RS+ and RS- current-sensing
inputs.
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/maxim,max11100.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Maxim MAX11100 ADC
maintainers:
- Jacopo Mondi <jacopo@jmondi.org>
description: |
Single channel 16 bit ADC with SPI interface.
properties:
compatible:
const: maxim,max11100
reg:
maxItems: 1
vref-supply:
description: External reference, needed to establish input scaling.
spi-max-frequency:
minimum: 100000
maximum: 4800000
additionalProperties: false
required:
- compatible
- reg
- vref-supply
examples:
- |
spi {
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
compatible = "maxim,max11100";
reg = <0>;
vref-supply = <&adc_vref>;
spi-max-frequency = <240000>;
};
};
...
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/maxim,max1118.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Maxim MAX1118 and similar ADCs
maintainers:
- Akinobu Mita <akinobu.mita@gmail.com>
description: |
Dual channel 8bit ADCs.
properties:
compatible:
enum:
- maxim,max1117
- maxim,max1118
- maxim,max1119
reg:
maxItems: 1
spi-max-frequency:
maximum: 5000000
vref-supply:
description: External reference, needed to establish input scaling
if:
properties:
compatible:
contains:
const: maxim,max1118
then:
required:
- vref-supply
else:
properties:
vref-supply: false
required:
- compatible
- reg
additionalProperties: false
examples:
- |
spi {
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
compatible = "maxim,max1118";
reg = <0>;
vref-supply = <&adc_vref>;
spi-max-frequency = <1000000>;
};
};
...
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/maxim,max9611.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Maxim MAX9611 and similar current sense amplifiers with integrated ADCs
maintainers:
- Jacopo Mondi <jacopo@jmondi.org>
description: |
These devices combine a high-side current sense amplifier with a 12 bit ADC.
They have an i2c interface.
properties:
compatible:
enum:
- maxim,max9611
- maxim,max9612
reg:
maxItems: 1
shunt-resistor-micro-ohms:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Value in micro Ohms of the shunt resistor connected between the RS+ and
RS- inputs, across which the current is measured. Value needed to compute
the scaling of the measured current.
additionalProperties: false
required:
- compatible
- reg
- shunt-resistor-micro-ohms
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
adc@7c {
compatible = "maxim,max9611";
reg = <0x7c>;
shunt-resistor-micro-ohms = <5000>;
};
};
...
* Microchip Analog to Digital Converter (ADC)
The node for this driver must be a child node of a SPI controller, hence
all mandatory properties described in
Documentation/devicetree/bindings/spi/spi-bus.txt
must be specified.
Required properties:
- compatible: Must be one of the following, depending on the
model:
"mcp3001" (DEPRECATED)
"mcp3002" (DEPRECATED)
"mcp3004" (DEPRECATED)
"mcp3008" (DEPRECATED)
"mcp3201" (DEPRECATED)
"mcp3202" (DEPRECATED)
"mcp3204" (DEPRECATED)
"mcp3208" (DEPRECATED)
"mcp3301" (DEPRECATED)
"microchip,mcp3001"
"microchip,mcp3002"
"microchip,mcp3004"
"microchip,mcp3008"
"microchip,mcp3201"
"microchip,mcp3202"
"microchip,mcp3204"
"microchip,mcp3208"
"microchip,mcp3301"
"microchip,mcp3550-50"
"microchip,mcp3550-60"
"microchip,mcp3551"
"microchip,mcp3553"
NOTE: The use of the compatibles with no vendor prefix
is deprecated and only listed because old DT use them.
- spi-cpha, spi-cpol (boolean):
Either SPI mode (0,0) or (1,1) must be used, so specify
none or both of spi-cpha, spi-cpol. The MCP3550/1/3
is more efficient in mode (1,1) as only 3 instead of
4 bytes need to be read from the ADC, but not all SPI
masters support it.
- vref-supply: Phandle to the external reference voltage supply.
Examples:
spi_controller {
mcp3x0x@0 {
compatible = "microchip,mcp3002";
reg = <0>;
spi-max-frequency = <1000000>;
vref-supply = <&vref_reg>;
};
};
* Microchip mcp3421/2/3/4/6/7/8 chip family (ADC)
Required properties:
- compatible: Should be
"microchip,mcp3421" or
"microchip,mcp3422" or
"microchip,mcp3423" or
"microchip,mcp3424" or
"microchip,mcp3425" or
"microchip,mcp3426" or
"microchip,mcp3427" or
"microchip,mcp3428"
- reg: I2C address for the device
Example:
adc@0 {
compatible = "microchip,mcp3424";
reg = <0x68>;
};
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3201.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Microchip mcp3201 and similar ADCs
maintainers:
- Oskar Andero <oskar.andero@gmail.com>
description: |
Family of simple ADCs with an I2C inteface.
properties:
compatible:
enum:
- microchip,mcp3001
- microchip,mcp3002
- microchip,mcp3004
- microchip,mcp3008
- microchip,mcp3201
- microchip,mcp3202
- microchip,mcp3204
- microchip,mcp3208
- microchip,mcp3301
- microchip,mcp3550-50
- microchip,mcp3550-60
- microchip,mcp3551
- microchip,mcp3553
reg:
maxItems: 1
spi-max-frequency: true
spi-cpha: true
spi-cpol: true
vref-supply:
description: External reference.
"#io-channel-cells":
const: 1
dependencies:
spi-cpol: [ spi-cpha ]
spi-cpha: [ spi-cpol ]
required:
- compatible
- reg
- vref-supply
additionalProperties: false
examples:
- |
spi {
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
compatible = "microchip,mcp3002";
reg = <0>;
vref-supply = <&vref_reg>;
spi-cpha;
spi-cpol;
#io-channel-cells = <1>;
};
adc@1 {
compatible = "microchip,mcp3002";
reg = <1>;
vref-supply = <&vref_reg>;
spi-max-frequency = <1500000>;
};
};
...
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/ti,adc0832.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments ADC0832 and similar ADCs
maintainers:
- Akinobu Mita <akinobu.mita@gmail.com>
description: |
8 bit ADCs with 1, 2, 4 or 8 inputs for single ended or differential
conversion.
properties:
compatible:
enum:
- ti,adc0831
- ti,adc0832
- ti,adc0834
- ti,adc0838
reg:
maxItems: 1
spi-max-frequency: true
vref-supply:
description: External reference, needed to establish input scaling
"#io-channel-cells":
const: 1
required:
- compatible
- reg
- vref-supply
additionalProperties: false
examples:
- |
spi {
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
compatible = "ti,adc0832";
reg = <0>;
vref-supply = <&vdd_supply>;
spi-max-frequency = <200000>;
#io-channel-cells = <1>;
};
};
...
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/ti,adc108s102.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments ADC108S102 and ADC128S102
maintainers:
- Bogdan Pricop <bogdan.pricop@emutex.com>
description: |
Family of 8 channel, 10/12 bit, SPI, single ended ADCs.
properties:
compatible:
const:
ti,adc108s102
reg: true
vref-supply: true
spi-max-frequency: true
"#io-channel-cells":
const: 1
required:
- compatible
- reg
- vref-supply
additionalProperties: false
examples:
- |
spi {
#address-cells= <1>;
#size-cells = <0>;
adc@0 {
compatible = "ti,adc108s102";
reg = <0>;
vref-supply = <&vdd_supply>;
spi-max-frequency = <1000000>;
#io-channel-cells = <1>;
};
};
...
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/ti,adc128s052.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments ADC128S052 and similar ADCs
maintainers:
- Angelo Compagnucci <angelo.compagnucci@gmail.com>
description: |
Family of 12 bit SPI ADCs with 2 to 8 channels with a range of different
target sample rates.
properties:
compatible:
enum:
- ti,adc122s021
- ti,adc122s051
- ti,adc122s101
- ti,adc124s021
- ti,adc124s051
- ti,adc124s101
- ti,adc128s052
reg:
maxItems: 1
spi-max-frequency: true
vref-supply: true
"#io-channel-cells":
const: 1
required:
- compatible
- reg
- vref-supply
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
compatible = "ti,adc128s052";
reg = <0>;
vref-supply = <&vdd_supply>;
spi-max-frequency = <1000000>;
#io-channel-cells = <1>;
};
};
...
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/ti,adc161s626.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments ADC141S626 and ADC161S626 ADCs
maintainers:
- Matt Ranostay <matt.ranostay@konsulko.com>
description: |
Single channel 14/16bit differential ADCs
properties:
compatible:
enum:
- ti,adc141s626
- ti,adc161s626
reg:
maxItems: 1
spi-max-frequency: true
vdda-supply: true
"#io-channel-cells":
const: 1
required:
- compatible
- reg
additionalProperties: false
examples:
- |
spi {
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
compatible = "ti,adc161s626";
vdda-supply = <&vdda_fixed>;
reg = <0>;
spi-max-frequency = <4300000>;
#io-channel-cells = <1>;
};
};
...
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/ti,ads8344.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments ADS8344 ADC
maintainers:
- Gregory Clement <gregory.clement@bootlin.com>
description: |
16bit 8-channel ADC with single ended inputs.
properties:
compatible:
const: ti,ads8344
reg:
maxItems: 1
spi-max-frequency: true
vref-supply:
description: Supply the 2.5V or 5V reference voltage
"#io-channel-cells":
const: 1
required:
- compatible
- reg
- vref-supply
additionalProperties: false
examples:
- |
spi {
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
compatible = "ti,ads8344";
reg = <0>;
vref-supply = <&refin_supply>;
spi-max-frequency = <10000000>;
#io-channel-cells = <1>;
};
};
...
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/ti,tlc4541.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments TLC4541 and similar ADCs
maintainers:
- Phil Reid <preid@electromag.com.au>
description: |
14/16bit single channel ADC with SPI interface.
properties:
compatible:
enum:
- ti,tlc3541
- ti,tlc4541
reg:
maxItems: 1
spi-max-frequency: true
vref-supply: true
"#io-channel-cells":
const: 1
required:
- compatible
- reg
- vref-supply
additionalProperties: false
examples:
- |
spi {
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
compatible = "ti,tlc4541";
reg = <0>;
vref-supply = <&vdd_supply>;
spi-max-frequency = <200000>;
#io-channel-cells = <1>;
};
};
...
* Texas Instruments' ADC0831/ADC0832/ADC0832/ADC0838
Required properties:
- compatible: Should be one of
* "ti,adc0831"
* "ti,adc0832"
* "ti,adc0834"
* "ti,adc0838"
- reg: spi chip select number for the device
- vref-supply: The regulator supply for ADC reference voltage
- spi-max-frequency: Max SPI frequency to use (< 400000)
Example:
adc@0 {
compatible = "ti,adc0832";
reg = <0>;
vref-supply = <&vdd_supply>;
spi-max-frequency = <200000>;
};
* Texas Instruments' ADC108S102 and ADC128S102 ADC chip
Required properties:
- compatible: Should be "ti,adc108s102"
- reg: spi chip select number for the device
- vref-supply: The regulator supply for ADC reference voltage
Recommended properties:
- spi-max-frequency: Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
Example:
adc@0 {
compatible = "ti,adc108s102";
reg = <0>;
vref-supply = <&vdd_supply>;
spi-max-frequency = <1000000>;
};
* Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip
Required properties:
- compatible: Should be one of:
- "ti,adc128s052"
- "ti,adc122s021"
- "ti,adc122s051"
- "ti,adc122s101"
- "ti,adc124s021"
- "ti,adc124s051"
- "ti,adc124s101"
- reg: spi chip select number for the device
- vref-supply: The regulator supply for ADC reference voltage
Recommended properties:
- spi-max-frequency: Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
Example:
adc@0 {
compatible = "ti,adc128s052";
reg = <0>;
vref-supply = <&vdd_supply>;
spi-max-frequency = <1000000>;
};
* Texas Instruments ADC141S626 and ADC161S626 chips
Required properties:
- compatible: Should be "ti,adc141s626" or "ti,adc161s626"
- reg: spi chip select number for the device
- vdda-supply: supply voltage to VDDA pin
Recommended properties:
- spi-max-frequency: Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
Example:
adc@0 {
compatible = "ti,adc161s626";
vdda-supply = <&vdda_fixed>;
reg = <0>;
spi-max-frequency = <4300000>;
};
* Texas Instruments ADS8344 A/DC chip
Required properties:
- compatible: Must be "ti,ads8344"
- reg: SPI chip select number for the device
- vref-supply: phandle to a regulator node that supplies the
reference voltage
Recommended properties:
- spi-max-frequency: Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
Example:
adc@0 {
compatible = "ti,ads8344";
reg = <0>;
vref-supply = <&refin_supply>;
spi-max-frequency = <10000000>;
};
...@@ -19,6 +19,8 @@ description: | ...@@ -19,6 +19,8 @@ description: |
http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf
http://www.atlas-scientific.com/_files/_datasheets/_oem/RTD_oem_datasheet.pdf http://www.atlas-scientific.com/_files/_datasheets/_oem/RTD_oem_datasheet.pdf
http://www.atlas-scientific.com/_files/_datasheets/_probe/EZO_CO2_Datasheet.pdf http://www.atlas-scientific.com/_files/_datasheets/_probe/EZO_CO2_Datasheet.pdf
https://www.atlas-scientific.com/files/EZO_O2_datasheet.pdf
https://www.atlas-scientific.com/files/EZO_HUM_Datasheet.pdf
properties: properties:
compatible: compatible:
...@@ -29,6 +31,8 @@ properties: ...@@ -29,6 +31,8 @@ properties:
- atlas,ph-sm - atlas,ph-sm
- atlas,rtd-sm - atlas,rtd-sm
- atlas,co2-ezo - atlas,co2-ezo
- atlas,o2-ezo
- atlas,hum-ezo
reg: reg:
maxItems: 1 maxItems: 1
......
# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
%YAML 1.2
---
$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC
maintainers:
- Michael Hennerich <michael.hennerich@analog.com>
description: |
Bindings for the Linear Technology LTC2632/2634/2636 DAC
Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/LTC263[246].pdf
properties:
compatible:
enum:
- lltc,ltc2632-l12
- lltc,ltc2632-l10
- lltc,ltc2632-l8
- lltc,ltc2632-h12
- lltc,ltc2632-h10
- lltc,ltc2632-h8
- lltc,ltc2634-l12
- lltc,ltc2634-l10
- lltc,ltc2634-l8
- lltc,ltc2634-h12
- lltc,ltc2634-h10
- lltc,ltc2634-h8
- lltc,ltc2636-l12
- lltc,ltc2636-l10
- lltc,ltc2636-l8
- lltc,ltc2636-h12
- lltc,ltc2636-h10
- lltc,ltc2636-h8
reg:
maxItems: 1
spi-max-frequency:
maximum: 2000000
vref-supply:
description:
Phandle to the external reference voltage supply. This should
only be set if there is an external reference voltage connected to the VREF
pin. If the property is not set the internal reference is used.
required:
- compatible
- reg
additionalProperties: false
examples:
- |
vref: regulator-vref {
compatible = "regulator-fixed";
regulator-name = "vref-ltc2632";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
};
spi {
#address-cells = <1>;
#size-cells = <0>;
dac@0 {
compatible = "lltc,ltc2632";
reg = <0>; /* CS0 */
spi-max-frequency = <1000000>;
vref-supply = <&vref>;
};
};
...
Linear Technology LTC2632/2634/2636 DAC
Required properties:
- compatible: Has to contain one of the following:
lltc,ltc2632-l12
lltc,ltc2632-l10
lltc,ltc2632-l8
lltc,ltc2632-h12
lltc,ltc2632-h10
lltc,ltc2632-h8
lltc,ltc2634-l12
lltc,ltc2634-l10
lltc,ltc2634-l8
lltc,ltc2634-h12
lltc,ltc2634-h10
lltc,ltc2634-h8
lltc,ltc2636-l12
lltc,ltc2636-l10
lltc,ltc2636-l8
lltc,ltc2636-h12
lltc,ltc2636-h10
lltc,ltc2636-h8
Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
apply. In particular, "reg" and "spi-max-frequency" properties must be given.
Optional properties:
- vref-supply: Phandle to the external reference voltage supply. This should
only be set if there is an external reference voltage connected to the VREF
pin. If the property is not set the internal reference is used.
Example:
vref: regulator-vref {
compatible = "regulator-fixed";
regulator-name = "vref-ltc2632";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
};
spi_master {
dac: ltc2632@0 {
compatible = "lltc,ltc2632-l12";
reg = <0>; /* CS0 */
spi-max-frequency = <1000000>;
vref-supply = <&vref>; /* optional */
};
};
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2020 Analog Devices Inc.
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/gyroscope/adi,adxrs290.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices ADXRS290 Dual-Axis MEMS Gyroscope
maintainers:
- Nishant Malpani <nish.malpani25@gmail.com>
description: |
Bindings for the Analog Devices ADXRS290 dual-axis MEMS gyroscope device.
https://www.analog.com/media/en/technical-documentation/data-sheets/ADXRS290.pdf
properties:
compatible:
const: adi,adxrs290
reg:
maxItems: 1
spi-max-frequency:
maximum: 5000000
spi-cpol: true
spi-cpha: true
required:
- compatible
- reg
- spi-max-frequency
- spi-cpol
- spi-cpha
additionalProperties: false
examples:
- |
spi {
#address-cells = <1>;
#size-cells = <0>;
gyro@0 {
compatible = "adi,adxrs290";
reg = <0>;
spi-max-frequency = <5000000>;
spi-cpol;
spi-cpha;
};
};
...
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/humidity/ti,hdc2010.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: HDC2010/HDC2080 humidity and temperature iio sensors
maintainers:
- Eugene Zaikonnikov <ez@norophonic.com>
description: |
Relative humidity and tempereature sensors on I2C bus
Datasheets are available at:
http://www.ti.com/product/HDC2010/datasheet
http://www.ti.com/product/HDC2080/datasheet
properties:
compatible:
enum:
- ti,hdc2010
- ti,hdc2080
vdd-supply:
maxItems: 1
reg:
maxItems: 1
required:
- compatible
- reg
examples:
- |
i2c0 {
#address-cells = <1>;
#size-cells = <0>;
humidity@40 {
compatible = "ti,hdc2010";
reg = <0x40>;
};
};
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor
maintainers:
- Christian Eggers <ceggers@arri.de>
description: |
XYZ True Color Sensor with I2C Interface
https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df
properties:
compatible:
enum:
- ams,as73211
reg:
description:
I2C address of the device (0x74...0x77).
maxItems: 1
interrupts:
description:
Interrupt specifier for the READY interrupt generated by the device.
maxItems: 1
required:
- compatible
- reg
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
as73211@74 {
compatible = "ams,as73211";
reg = <0x74>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_color_sensor>;
interrupt-parent = <&gpio2>;
interrupts = <19 IRQ_TYPE_EDGE_RISING>; /* READY */
};
};
...
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9310.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Semtech's SX9310 capacitive proximity sensor
maintainers:
- Daniel Campello <campello@chromium.org>
description: |
Semtech's SX9310/SX9311 capacitive proximity/button solution.
Specifications about the devices can be found at:
https://www.semtech.com/products/smart-sensing/sar-sensors/sx9310
properties:
compatible:
enum:
- semtech,sx9310
- semtech,sx9311
reg:
maxItems: 1
interrupts:
description:
The sole interrupt generated by the device used to announce the
preceding reading request has finished and that data is
available or that a close/far proximity event has happened.
maxItems: 1
vdd-supply:
description: Main power supply
svdd-supply:
description: Host interface power supply
"#io-channel-cells":
const: 1
required:
- compatible
- reg
- "#io-channel-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
proximity@28 {
compatible = "semtech,sx9310";
reg = <0x28>;
interrupt-parent = <&pio>;
interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
vdd-supply = <&pp3300_a>;
svdd-supply = <&pp1800_prox>;
#io-channel-cells = <1>;
};
};
...@@ -128,6 +128,22 @@ properties: ...@@ -128,6 +128,22 @@ properties:
- mcube,mc3230 - mcube,mc3230
# MEMSIC 2-axis 8-bit digital accelerometer # MEMSIC 2-axis 8-bit digital accelerometer
- memsic,mxc6225 - memsic,mxc6225
# Microchip differential I2C ADC, 1 Channel, 18 bit
- microchip,mcp3421
# Microchip differential I2C ADC, 2 Channel, 18 bit
- microchip,mcp3422
# Microchip differential I2C ADC, 2 Channel, 18 bit
- microchip,mcp3423
# Microchip differential I2C ADC, 4 Channel, 18 bit
- microchip,mcp3424
# Microchip differential I2C ADC, 1 Channel, 16 bit
- microchip,mcp3425
# Microchip differential I2C ADC, 2 Channel, 16 bit
- microchip,mcp3426
# Microchip differential I2C ADC, 2 Channel, 16 bit
- microchip,mcp3427
# Microchip differential I2C ADC, 4 Channel, 16 bit
- microchip,mcp3428
# Microchip 7-bit Single I2C Digital POT (5k) # Microchip 7-bit Single I2C Digital POT (5k)
- microchip,mcp4017-502 - microchip,mcp4017-502
# Microchip 7-bit Single I2C Digital POT (10k) # Microchip 7-bit Single I2C Digital POT (10k)
......
...@@ -943,6 +943,13 @@ S: Supported ...@@ -943,6 +943,13 @@ S: Supported
F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
F: drivers/net/ethernet/amd/xgbe/ F: drivers/net/ethernet/amd/xgbe/
AMS AS73211 DRIVER
M: Christian Eggers <ceggers@arri.de>
L: linux-iio@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
F: drivers/iio/light/as73211.c
ANALOG DEVICES INC AD5686 DRIVER ANALOG DEVICES INC AD5686 DRIVER
M: Michael Hennerich <Michael.Hennerich@analog.com> M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-pm@vger.kernel.org L: linux-pm@vger.kernel.org
...@@ -1108,6 +1115,13 @@ L: linux-media@vger.kernel.org ...@@ -1108,6 +1115,13 @@ L: linux-media@vger.kernel.org
S: Maintained S: Maintained
F: drivers/media/i2c/adv7842* F: drivers/media/i2c/adv7842*
ANALOG DEVICES INC ADXRS290 DRIVER
M: Nishant Malpani <nish.malpani25@gmail.com>
L: linux-iio@vger.kernel.org
S: Supported
F: drivers/iio/gyro/adxrs290.c
F: Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
ANALOG DEVICES INC ASOC CODEC DRIVERS ANALOG DEVICES INC ASOC CODEC DRIVERS
M: Lars-Peter Clausen <lars@metafoo.de> M: Lars-Peter Clausen <lars@metafoo.de>
M: Nuno Sá <nuno.sa@analog.com> M: Nuno Sá <nuno.sa@analog.com>
......
This diff is collapsed.
...@@ -6,6 +6,7 @@ ...@@ -6,6 +6,7 @@
*/ */
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/regmap.h> #include <linux/regmap.h>
...@@ -46,9 +47,16 @@ static const struct i2c_device_id adxl372_i2c_id[] = { ...@@ -46,9 +47,16 @@ static const struct i2c_device_id adxl372_i2c_id[] = {
}; };
MODULE_DEVICE_TABLE(i2c, adxl372_i2c_id); MODULE_DEVICE_TABLE(i2c, adxl372_i2c_id);
static const struct of_device_id adxl372_of_match[] = {
{ .compatible = "adi,adxl372" },
{ }
};
MODULE_DEVICE_TABLE(of, adxl372_of_match);
static struct i2c_driver adxl372_i2c_driver = { static struct i2c_driver adxl372_i2c_driver = {
.driver = { .driver = {
.name = "adxl372_i2c", .name = "adxl372_i2c",
.of_match_table = adxl372_of_match,
}, },
.probe = adxl372_i2c_probe, .probe = adxl372_i2c_probe,
.id_table = adxl372_i2c_id, .id_table = adxl372_i2c_id,
......
...@@ -40,8 +40,8 @@ static const struct spi_device_id adxl372_spi_id[] = { ...@@ -40,8 +40,8 @@ static const struct spi_device_id adxl372_spi_id[] = {
MODULE_DEVICE_TABLE(spi, adxl372_spi_id); MODULE_DEVICE_TABLE(spi, adxl372_spi_id);
static const struct of_device_id adxl372_of_match[] = { static const struct of_device_id adxl372_of_match[] = {
{ .compatible = "adi,adxl372" }, { .compatible = "adi,adxl372" },
{ }, { }
}; };
MODULE_DEVICE_TABLE(of, adxl372_of_match); MODULE_DEVICE_TABLE(of, adxl372_of_match);
......
...@@ -1000,19 +1000,15 @@ static int bma180_probe(struct i2c_client *client, ...@@ -1000,19 +1000,15 @@ static int bma180_probe(struct i2c_client *client,
return ret; return ret;
data->vdd_supply = devm_regulator_get(dev, "vdd"); data->vdd_supply = devm_regulator_get(dev, "vdd");
if (IS_ERR(data->vdd_supply)) { if (IS_ERR(data->vdd_supply))
if (PTR_ERR(data->vdd_supply) != -EPROBE_DEFER) return dev_err_probe(dev, PTR_ERR(data->vdd_supply),
dev_err(dev, "Failed to get vdd regulator %d\n", "Failed to get vdd regulator\n");
(int)PTR_ERR(data->vdd_supply));
return PTR_ERR(data->vdd_supply);
}
data->vddio_supply = devm_regulator_get(dev, "vddio"); data->vddio_supply = devm_regulator_get(dev, "vddio");
if (IS_ERR(data->vddio_supply)) { if (IS_ERR(data->vddio_supply))
if (PTR_ERR(data->vddio_supply) != -EPROBE_DEFER) return dev_err_probe(dev, PTR_ERR(data->vddio_supply),
dev_err(dev, "Failed to get vddio regulator %d\n", "Failed to get vddio regulator\n");
(int)PTR_ERR(data->vddio_supply));
return PTR_ERR(data->vddio_supply);
}
/* Typical voltage 2.4V these are min and max */ /* Typical voltage 2.4V these are min and max */
ret = regulator_set_voltage(data->vdd_supply, 1620000, 3600000); ret = regulator_set_voltage(data->vdd_supply, 1620000, 3600000);
if (ret) if (ret)
......
...@@ -2,16 +2,18 @@ ...@@ -2,16 +2,18 @@
/** /**
* BMA220 Digital triaxial acceleration sensor driver * BMA220 Digital triaxial acceleration sensor driver
* *
* Copyright (c) 2016, Intel Corporation. * Copyright (c) 2016,2020 Intel Corporation.
*/ */
#include <linux/acpi.h> #include <linux/bits.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/iio/buffer.h> #include <linux/iio/buffer.h>
#include <linux/iio/iio.h> #include <linux/iio/iio.h>
#include <linux/iio/sysfs.h> #include <linux/iio/sysfs.h>
#include <linux/spi/spi.h>
#include <linux/iio/trigger_consumer.h> #include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h> #include <linux/iio/triggered_buffer.h>
...@@ -23,14 +25,13 @@ ...@@ -23,14 +25,13 @@
#define BMA220_REG_SUSPEND 0x18 #define BMA220_REG_SUSPEND 0x18
#define BMA220_CHIP_ID 0xDD #define BMA220_CHIP_ID 0xDD
#define BMA220_READ_MASK 0x80 #define BMA220_READ_MASK BIT(7)
#define BMA220_RANGE_MASK 0x03 #define BMA220_RANGE_MASK GENMASK(1, 0)
#define BMA220_DATA_SHIFT 2 #define BMA220_DATA_SHIFT 2
#define BMA220_SUSPEND_SLEEP 0xFF #define BMA220_SUSPEND_SLEEP 0xFF
#define BMA220_SUSPEND_WAKE 0x00 #define BMA220_SUSPEND_WAKE 0x00
#define BMA220_DEVICE_NAME "bma220" #define BMA220_DEVICE_NAME "bma220"
#define BMA220_SCALE_AVAILABLE "0.623 1.248 2.491 4.983"
#define BMA220_ACCEL_CHANNEL(index, reg, axis) { \ #define BMA220_ACCEL_CHANNEL(index, reg, axis) { \
.type = IIO_ACCEL, \ .type = IIO_ACCEL, \
...@@ -55,19 +56,8 @@ enum bma220_axis { ...@@ -55,19 +56,8 @@ enum bma220_axis {
AXIS_Z, AXIS_Z,
}; };
static IIO_CONST_ATTR(in_accel_scale_available, BMA220_SCALE_AVAILABLE); static const int bma220_scale_table[][2] = {
{0, 623000}, {1, 248000}, {2, 491000}, {4, 983000},
static struct attribute *bma220_attributes[] = {
&iio_const_attr_in_accel_scale_available.dev_attr.attr,
NULL,
};
static const struct attribute_group bma220_attribute_group = {
.attrs = bma220_attributes,
};
static const int bma220_scale_table[][4] = {
{0, 623000}, {1, 248000}, {2, 491000}, {4, 983000}
}; };
struct bma220_data { struct bma220_data {
...@@ -182,10 +172,26 @@ static int bma220_write_raw(struct iio_dev *indio_dev, ...@@ -182,10 +172,26 @@ static int bma220_write_raw(struct iio_dev *indio_dev,
return -EINVAL; return -EINVAL;
} }
static int bma220_read_avail(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
const int **vals, int *type, int *length,
long mask)
{
switch (mask) {
case IIO_CHAN_INFO_SCALE:
*vals = (int *)bma220_scale_table;
*type = IIO_VAL_INT_PLUS_MICRO;
*length = ARRAY_SIZE(bma220_scale_table) * 2;
return IIO_AVAIL_LIST;
default:
return -EINVAL;
}
}
static const struct iio_info bma220_info = { static const struct iio_info bma220_info = {
.read_raw = bma220_read_raw, .read_raw = bma220_read_raw,
.write_raw = bma220_write_raw, .write_raw = bma220_write_raw,
.attrs = &bma220_attribute_group, .read_avail = bma220_read_avail,
}; };
static int bma220_init(struct spi_device *spi) static int bma220_init(struct spi_device *spi)
...@@ -198,10 +204,12 @@ static int bma220_init(struct spi_device *spi) ...@@ -198,10 +204,12 @@ static int bma220_init(struct spi_device *spi)
/* Make sure the chip is powered on */ /* Make sure the chip is powered on */
ret = bma220_read_reg(spi, BMA220_REG_SUSPEND); ret = bma220_read_reg(spi, BMA220_REG_SUSPEND);
if (ret == BMA220_SUSPEND_WAKE)
ret = bma220_read_reg(spi, BMA220_REG_SUSPEND);
if (ret < 0) if (ret < 0)
return ret; return ret;
else if (ret == BMA220_SUSPEND_WAKE) if (ret == BMA220_SUSPEND_WAKE)
return bma220_read_reg(spi, BMA220_REG_SUSPEND); return -EBUSY;
return 0; return 0;
} }
...@@ -212,10 +220,12 @@ static int bma220_deinit(struct spi_device *spi) ...@@ -212,10 +220,12 @@ static int bma220_deinit(struct spi_device *spi)
/* Make sure the chip is powered off */ /* Make sure the chip is powered off */
ret = bma220_read_reg(spi, BMA220_REG_SUSPEND); ret = bma220_read_reg(spi, BMA220_REG_SUSPEND);
if (ret == BMA220_SUSPEND_SLEEP)
ret = bma220_read_reg(spi, BMA220_REG_SUSPEND);
if (ret < 0) if (ret < 0)
return ret; return ret;
else if (ret == BMA220_SUSPEND_SLEEP) if (ret == BMA220_SUSPEND_SLEEP)
return bma220_read_reg(spi, BMA220_REG_SUSPEND); return -EBUSY;
return 0; return 0;
} }
...@@ -245,7 +255,7 @@ static int bma220_probe(struct spi_device *spi) ...@@ -245,7 +255,7 @@ static int bma220_probe(struct spi_device *spi)
indio_dev->available_scan_masks = bma220_accel_scan_masks; indio_dev->available_scan_masks = bma220_accel_scan_masks;
ret = bma220_init(data->spi_device); ret = bma220_init(data->spi_device);
if (ret < 0) if (ret)
return ret; return ret;
ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time, ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
...@@ -278,56 +288,43 @@ static int bma220_remove(struct spi_device *spi) ...@@ -278,56 +288,43 @@ static int bma220_remove(struct spi_device *spi)
return bma220_deinit(spi); return bma220_deinit(spi);
} }
#ifdef CONFIG_PM_SLEEP static __maybe_unused int bma220_suspend(struct device *dev)
static int bma220_suspend(struct device *dev)
{ {
struct bma220_data *data = struct bma220_data *data = iio_priv(dev_get_drvdata(dev));
iio_priv(spi_get_drvdata(to_spi_device(dev)));
/* The chip can be suspended/woken up by a simple register read. */ /* The chip can be suspended/woken up by a simple register read. */
return bma220_read_reg(data->spi_device, BMA220_REG_SUSPEND); return bma220_read_reg(data->spi_device, BMA220_REG_SUSPEND);
} }
static int bma220_resume(struct device *dev) static __maybe_unused int bma220_resume(struct device *dev)
{ {
struct bma220_data *data = struct bma220_data *data = iio_priv(dev_get_drvdata(dev));
iio_priv(spi_get_drvdata(to_spi_device(dev)));
return bma220_read_reg(data->spi_device, BMA220_REG_SUSPEND); return bma220_read_reg(data->spi_device, BMA220_REG_SUSPEND);
} }
static SIMPLE_DEV_PM_OPS(bma220_pm_ops, bma220_suspend, bma220_resume); static SIMPLE_DEV_PM_OPS(bma220_pm_ops, bma220_suspend, bma220_resume);
#define BMA220_PM_OPS (&bma220_pm_ops)
#else
#define BMA220_PM_OPS NULL
#endif
static const struct spi_device_id bma220_spi_id[] = { static const struct spi_device_id bma220_spi_id[] = {
{"bma220", 0}, {"bma220", 0},
{} {}
}; };
#ifdef CONFIG_ACPI
static const struct acpi_device_id bma220_acpi_id[] = { static const struct acpi_device_id bma220_acpi_id[] = {
{"BMA0220", 0}, {"BMA0220", 0},
{} {}
}; };
MODULE_DEVICE_TABLE(spi, bma220_spi_id); MODULE_DEVICE_TABLE(spi, bma220_spi_id);
#endif
static struct spi_driver bma220_driver = { static struct spi_driver bma220_driver = {
.driver = { .driver = {
.name = "bma220_spi", .name = "bma220_spi",
.pm = BMA220_PM_OPS, .pm = &bma220_pm_ops,
.acpi_match_table = ACPI_PTR(bma220_acpi_id), .acpi_match_table = bma220_acpi_id,
}, },
.probe = bma220_probe, .probe = bma220_probe,
.remove = bma220_remove, .remove = bma220_remove,
.id_table = bma220_spi_id, .id_table = bma220_spi_id,
}; };
module_spi_driver(bma220_driver); module_spi_driver(bma220_driver);
MODULE_AUTHOR("Tiberiu Breana <tiberiu.a.breana@intel.com>"); MODULE_AUTHOR("Tiberiu Breana <tiberiu.a.breana@intel.com>");
......
...@@ -1538,22 +1538,14 @@ static int mma8452_probe(struct i2c_client *client, ...@@ -1538,22 +1538,14 @@ static int mma8452_probe(struct i2c_client *client,
data->chip_info = match->data; data->chip_info = match->data;
data->vdd_reg = devm_regulator_get(&client->dev, "vdd"); data->vdd_reg = devm_regulator_get(&client->dev, "vdd");
if (IS_ERR(data->vdd_reg)) { if (IS_ERR(data->vdd_reg))
if (PTR_ERR(data->vdd_reg) == -EPROBE_DEFER) return dev_err_probe(&client->dev, PTR_ERR(data->vdd_reg),
return -EPROBE_DEFER; "failed to get VDD regulator!\n");
dev_err(&client->dev, "failed to get VDD regulator!\n");
return PTR_ERR(data->vdd_reg);
}
data->vddio_reg = devm_regulator_get(&client->dev, "vddio"); data->vddio_reg = devm_regulator_get(&client->dev, "vddio");
if (IS_ERR(data->vddio_reg)) { if (IS_ERR(data->vddio_reg))
if (PTR_ERR(data->vddio_reg) == -EPROBE_DEFER) return dev_err_probe(&client->dev, PTR_ERR(data->vddio_reg),
return -EPROBE_DEFER; "failed to get VDDIO regulator!\n");
dev_err(&client->dev, "failed to get VDDIO regulator!\n");
return PTR_ERR(data->vddio_reg);
}
ret = regulator_enable(data->vdd_reg); ret = regulator_enable(data->vdd_reg);
if (ret) { if (ret) {
......
...@@ -340,7 +340,7 @@ config AXP288_ADC ...@@ -340,7 +340,7 @@ config AXP288_ADC
config BCM_IPROC_ADC config BCM_IPROC_ADC
tristate "Broadcom IPROC ADC driver" tristate "Broadcom IPROC ADC driver"
depends on ARCH_BCM_IPROC || COMPILE_TEST depends on (ARCH_BCM_IPROC && OF) || COMPILE_TEST
depends on MFD_SYSCON depends on MFD_SYSCON
default ARCH_BCM_CYGNUS default ARCH_BCM_CYGNUS
help help
......
...@@ -276,7 +276,7 @@ static struct attribute *adi_axi_adc_attributes[] = { ...@@ -276,7 +276,7 @@ static struct attribute *adi_axi_adc_attributes[] = {
static umode_t axi_adc_attr_is_visible(struct kobject *kobj, static umode_t axi_adc_attr_is_visible(struct kobject *kobj,
struct attribute *attr, int n) struct attribute *attr, int n)
{ {
struct device *dev = container_of(kobj, struct device, kobj); struct device *dev = kobj_to_dev(kobj);
struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct adi_axi_adc_state *st = iio_priv(indio_dev); struct adi_axi_adc_state *st = iio_priv(indio_dev);
struct adi_axi_adc_conv *conv = &st->client->conv; struct adi_axi_adc_conv *conv = &st->client->conv;
......
...@@ -9,10 +9,10 @@ ...@@ -9,10 +9,10 @@
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/of.h> #include <linux/mod_devicetable.h>
#include <linux/of_device.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/pm_runtime.h> #include <linux/pm_runtime.h>
#include <linux/property.h>
#include <linux/regmap.h> #include <linux/regmap.h>
#include <linux/thermal.h> #include <linux/thermal.h>
...@@ -67,7 +67,7 @@ struct axp_data; ...@@ -67,7 +67,7 @@ struct axp_data;
struct axp20x_adc_iio { struct axp20x_adc_iio {
struct regmap *regmap; struct regmap *regmap;
struct axp_data *data; const struct axp_data *data;
}; };
enum axp20x_adc_channel_v { enum axp20x_adc_channel_v {
...@@ -670,15 +670,15 @@ static int axp20x_probe(struct platform_device *pdev) ...@@ -670,15 +670,15 @@ static int axp20x_probe(struct platform_device *pdev)
info->regmap = axp20x_dev->regmap; info->regmap = axp20x_dev->regmap;
indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->modes = INDIO_DIRECT_MODE;
if (!pdev->dev.of_node) { if (!dev_fwnode(&pdev->dev)) {
const struct platform_device_id *id; const struct platform_device_id *id;
id = platform_get_device_id(pdev); id = platform_get_device_id(pdev);
info->data = (struct axp_data *)id->driver_data; info->data = (const struct axp_data *)id->driver_data;
} else { } else {
struct device *dev = &pdev->dev; struct device *dev = &pdev->dev;
info->data = (struct axp_data *)of_device_get_match_data(dev); info->data = device_get_match_data(dev);
} }
indio_dev->name = platform_get_device_id(pdev)->name; indio_dev->name = platform_get_device_id(pdev)->name;
...@@ -742,7 +742,7 @@ static int axp20x_remove(struct platform_device *pdev) ...@@ -742,7 +742,7 @@ static int axp20x_remove(struct platform_device *pdev)
static struct platform_driver axp20x_adc_driver = { static struct platform_driver axp20x_adc_driver = {
.driver = { .driver = {
.name = "axp20x-adc", .name = "axp20x-adc",
.of_match_table = of_match_ptr(axp20x_adc_of_match), .of_match_table = axp20x_adc_of_match,
}, },
.id_table = axp20x_adc_id_match, .id_table = axp20x_adc_id_match,
.probe = axp20x_probe, .probe = axp20x_probe,
......
...@@ -4,7 +4,7 @@ ...@@ -4,7 +4,7 @@
*/ */
#include <linux/module.h> #include <linux/module.h>
#include <linux/of.h> #include <linux/mod_devicetable.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/clk.h> #include <linux/clk.h>
#include <linux/mfd/syscon.h> #include <linux/mfd/syscon.h>
...@@ -617,7 +617,7 @@ static struct platform_driver iproc_adc_driver = { ...@@ -617,7 +617,7 @@ static struct platform_driver iproc_adc_driver = {
.remove = iproc_adc_remove, .remove = iproc_adc_remove,
.driver = { .driver = {
.name = "iproc-static-adc", .name = "iproc-static-adc",
.of_match_table = of_match_ptr(iproc_adc_of_match), .of_match_table = iproc_adc_of_match,
}, },
}; };
module_platform_driver(iproc_adc_driver); module_platform_driver(iproc_adc_driver);
......
...@@ -348,11 +348,9 @@ static int envelope_detector_probe(struct platform_device *pdev) ...@@ -348,11 +348,9 @@ static int envelope_detector_probe(struct platform_device *pdev)
indio_dev->num_channels = 1; indio_dev->num_channels = 1;
env->dac = devm_iio_channel_get(dev, "dac"); env->dac = devm_iio_channel_get(dev, "dac");
if (IS_ERR(env->dac)) { if (IS_ERR(env->dac))
if (PTR_ERR(env->dac) != -EPROBE_DEFER) return dev_err_probe(dev, PTR_ERR(env->dac),
dev_err(dev, "failed to get dac input channel\n"); "failed to get dac input channel\n");
return PTR_ERR(env->dac);
}
env->comp_irq = platform_get_irq_byname(pdev, "comp"); env->comp_irq = platform_get_irq_byname(pdev, "comp");
if (env->comp_irq < 0) if (env->comp_irq < 0)
...@@ -360,11 +358,9 @@ static int envelope_detector_probe(struct platform_device *pdev) ...@@ -360,11 +358,9 @@ static int envelope_detector_probe(struct platform_device *pdev)
ret = devm_request_irq(dev, env->comp_irq, envelope_detector_comp_isr, ret = devm_request_irq(dev, env->comp_irq, envelope_detector_comp_isr,
0, "envelope-detector", env); 0, "envelope-detector", env);
if (ret) { if (ret)
if (ret != -EPROBE_DEFER) return dev_err_probe(dev, ret, "failed to request interrupt\n");
dev_err(dev, "failed to request interrupt\n");
return ret;
}
env->comp_irq_trigger = irq_get_trigger_type(env->comp_irq); env->comp_irq_trigger = irq_get_trigger_type(env->comp_irq);
if (env->comp_irq_trigger & IRQF_TRIGGER_RISING) if (env->comp_irq_trigger & IRQF_TRIGGER_RISING)
env->comp_irq_trigger_inv |= IRQF_TRIGGER_FALLING; env->comp_irq_trigger_inv |= IRQF_TRIGGER_FALLING;
......
...@@ -844,13 +844,9 @@ static int exynos_adc_probe(struct platform_device *pdev) ...@@ -844,13 +844,9 @@ static int exynos_adc_probe(struct platform_device *pdev)
} }
info->vdd = devm_regulator_get(&pdev->dev, "vdd"); info->vdd = devm_regulator_get(&pdev->dev, "vdd");
if (IS_ERR(info->vdd)) { if (IS_ERR(info->vdd))
if (PTR_ERR(info->vdd) != -EPROBE_DEFER) return dev_err_probe(&pdev->dev, PTR_ERR(info->vdd),
dev_err(&pdev->dev, "failed getting regulator");
"failed getting regulator, err = %ld\n",
PTR_ERR(info->vdd));
return PTR_ERR(info->vdd);
}
ret = regulator_enable(info->vdd); ret = regulator_enable(info->vdd);
if (ret) if (ret)
......
...@@ -180,13 +180,9 @@ int ltc2497core_probe(struct device *dev, struct iio_dev *indio_dev) ...@@ -180,13 +180,9 @@ int ltc2497core_probe(struct device *dev, struct iio_dev *indio_dev)
return ret; return ret;
ddata->ref = devm_regulator_get(dev, "vref"); ddata->ref = devm_regulator_get(dev, "vref");
if (IS_ERR(ddata->ref)) { if (IS_ERR(ddata->ref))
if (PTR_ERR(ddata->ref) != -EPROBE_DEFER) return dev_err_probe(dev, PTR_ERR(ddata->ref),
dev_err(dev, "Failed to get vref regulator: %pe\n", "Failed to get vref regulator\n");
ddata->ref);
return PTR_ERR(ddata->ref);
}
ret = regulator_enable(ddata->ref); ret = regulator_enable(ddata->ref);
if (ret < 0) { if (ret < 0) {
......
...@@ -719,11 +719,8 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev) ...@@ -719,11 +719,8 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
if (ret == -ENODEV) if (ret == -ENODEV)
return 0; return 0;
if (ret != -EPROBE_DEFER) return dev_err_probe(indio_dev->dev.parent, ret,
dev_err(indio_dev->dev.parent, "failed to get temperature_calib cell\n");
"failed to get temperature_calib cell\n");
return ret;
} }
priv->tsc_regmap = priv->tsc_regmap =
......
...@@ -495,12 +495,9 @@ static int rcar_gyroadc_probe(struct platform_device *pdev) ...@@ -495,12 +495,9 @@ static int rcar_gyroadc_probe(struct platform_device *pdev)
return PTR_ERR(priv->regs); return PTR_ERR(priv->regs);
priv->clk = devm_clk_get(dev, "fck"); priv->clk = devm_clk_get(dev, "fck");
if (IS_ERR(priv->clk)) { if (IS_ERR(priv->clk))
ret = PTR_ERR(priv->clk); return dev_err_probe(dev, PTR_ERR(priv->clk),
if (ret != -EPROBE_DEFER) "Failed to get IF clock\n");
dev_err(dev, "Failed to get IF clock (ret=%i)\n", ret);
return ret;
}
ret = rcar_gyroadc_parse_subdevs(indio_dev); ret = rcar_gyroadc_parse_subdevs(indio_dev);
if (ret) if (ret)
......
...@@ -582,11 +582,9 @@ static int stm32_adc_core_switches_probe(struct device *dev, ...@@ -582,11 +582,9 @@ static int stm32_adc_core_switches_probe(struct device *dev,
priv->syscfg = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); priv->syscfg = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
if (IS_ERR(priv->syscfg)) { if (IS_ERR(priv->syscfg)) {
ret = PTR_ERR(priv->syscfg); ret = PTR_ERR(priv->syscfg);
if (ret != -ENODEV) { if (ret != -ENODEV)
if (ret != -EPROBE_DEFER) return dev_err_probe(dev, ret, "Can't probe syscfg\n");
dev_err(dev, "Can't probe syscfg: %d\n", ret);
return ret;
}
priv->syscfg = NULL; priv->syscfg = NULL;
} }
...@@ -596,12 +594,9 @@ static int stm32_adc_core_switches_probe(struct device *dev, ...@@ -596,12 +594,9 @@ static int stm32_adc_core_switches_probe(struct device *dev,
priv->booster = devm_regulator_get_optional(dev, "booster"); priv->booster = devm_regulator_get_optional(dev, "booster");
if (IS_ERR(priv->booster)) { if (IS_ERR(priv->booster)) {
ret = PTR_ERR(priv->booster); ret = PTR_ERR(priv->booster);
if (ret != -ENODEV) { if (ret != -ENODEV)
if (ret != -EPROBE_DEFER) dev_err_probe(dev, ret, "can't get booster\n");
dev_err(dev, "can't get booster %d\n",
ret);
return ret;
}
priv->booster = NULL; priv->booster = NULL;
} }
} }
...@@ -612,11 +607,9 @@ static int stm32_adc_core_switches_probe(struct device *dev, ...@@ -612,11 +607,9 @@ static int stm32_adc_core_switches_probe(struct device *dev,
priv->vdd = devm_regulator_get_optional(dev, "vdd"); priv->vdd = devm_regulator_get_optional(dev, "vdd");
if (IS_ERR(priv->vdd)) { if (IS_ERR(priv->vdd)) {
ret = PTR_ERR(priv->vdd); ret = PTR_ERR(priv->vdd);
if (ret != -ENODEV) { if (ret != -ENODEV)
if (ret != -EPROBE_DEFER) return dev_err_probe(dev, ret, "can't get vdd\n");
dev_err(dev, "can't get vdd %d\n", ret);
return ret;
}
priv->vdd = NULL; priv->vdd = NULL;
} }
} }
...@@ -669,42 +662,24 @@ static int stm32_adc_probe(struct platform_device *pdev) ...@@ -669,42 +662,24 @@ static int stm32_adc_probe(struct platform_device *pdev)
priv->common.phys_base = res->start; priv->common.phys_base = res->start;
priv->vdda = devm_regulator_get(&pdev->dev, "vdda"); priv->vdda = devm_regulator_get(&pdev->dev, "vdda");
if (IS_ERR(priv->vdda)) { if (IS_ERR(priv->vdda))
ret = PTR_ERR(priv->vdda); return dev_err_probe(&pdev->dev, PTR_ERR(priv->vdda),
if (ret != -EPROBE_DEFER) "vdda get failed\n");
dev_err(&pdev->dev, "vdda get failed, %d\n", ret);
return ret;
}
priv->vref = devm_regulator_get(&pdev->dev, "vref"); priv->vref = devm_regulator_get(&pdev->dev, "vref");
if (IS_ERR(priv->vref)) { if (IS_ERR(priv->vref))
ret = PTR_ERR(priv->vref); return dev_err_probe(&pdev->dev, PTR_ERR(priv->vref),
if (ret != -EPROBE_DEFER) "vref get failed\n");
dev_err(&pdev->dev, "vref get failed, %d\n", ret);
return ret; priv->aclk = devm_clk_get_optional(&pdev->dev, "adc");
} if (IS_ERR(priv->aclk))
return dev_err_probe(&pdev->dev, PTR_ERR(priv->aclk),
priv->aclk = devm_clk_get(&pdev->dev, "adc"); "Can't get 'adc' clock\n");
if (IS_ERR(priv->aclk)) {
ret = PTR_ERR(priv->aclk); priv->bclk = devm_clk_get_optional(&pdev->dev, "bus");
if (ret != -ENOENT) { if (IS_ERR(priv->bclk))
if (ret != -EPROBE_DEFER) return dev_err_probe(&pdev->dev, PTR_ERR(priv->bclk),
dev_err(&pdev->dev, "Can't get 'adc' clock\n"); "Can't get 'bus' clock\n");
return ret;
}
priv->aclk = NULL;
}
priv->bclk = devm_clk_get(&pdev->dev, "bus");
if (IS_ERR(priv->bclk)) {
ret = PTR_ERR(priv->bclk);
if (ret != -ENOENT) {
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev, "Can't get 'bus' clock\n");
return ret;
}
priv->bclk = NULL;
}
ret = stm32_adc_core_switches_probe(dev, priv); ret = stm32_adc_core_switches_probe(dev, priv);
if (ret) if (ret)
......
...@@ -1805,13 +1805,9 @@ static int stm32_adc_dma_request(struct device *dev, struct iio_dev *indio_dev) ...@@ -1805,13 +1805,9 @@ static int stm32_adc_dma_request(struct device *dev, struct iio_dev *indio_dev)
adc->dma_chan = dma_request_chan(dev, "rx"); adc->dma_chan = dma_request_chan(dev, "rx");
if (IS_ERR(adc->dma_chan)) { if (IS_ERR(adc->dma_chan)) {
ret = PTR_ERR(adc->dma_chan); ret = PTR_ERR(adc->dma_chan);
if (ret != -ENODEV) { if (ret != -ENODEV)
if (ret != -EPROBE_DEFER) return dev_err_probe(dev, ret,
dev_err(dev, "DMA channel request failed with\n");
"DMA channel request failed with %d\n",
ret);
return ret;
}
/* DMA is optional: fall back to IRQ mode */ /* DMA is optional: fall back to IRQ mode */
adc->dma_chan = NULL; adc->dma_chan = NULL;
......
...@@ -1473,13 +1473,9 @@ static int stm32_dfsdm_adc_init(struct device *dev, struct iio_dev *indio_dev) ...@@ -1473,13 +1473,9 @@ static int stm32_dfsdm_adc_init(struct device *dev, struct iio_dev *indio_dev)
/* Optionally request DMA */ /* Optionally request DMA */
ret = stm32_dfsdm_dma_request(dev, indio_dev); ret = stm32_dfsdm_dma_request(dev, indio_dev);
if (ret) { if (ret) {
if (ret != -ENODEV) { if (ret != -ENODEV)
if (ret != -EPROBE_DEFER) return dev_err_probe(dev, ret,
dev_err(dev, "DMA channel request failed with\n");
"DMA channel request failed with %d\n",
ret);
return ret;
}
dev_dbg(dev, "No DMA support\n"); dev_dbg(dev, "No DMA support\n");
return 0; return 0;
......
...@@ -243,12 +243,9 @@ static int stm32_dfsdm_parse_of(struct platform_device *pdev, ...@@ -243,12 +243,9 @@ static int stm32_dfsdm_parse_of(struct platform_device *pdev,
* on use case. * on use case.
*/ */
priv->clk = devm_clk_get(&pdev->dev, "dfsdm"); priv->clk = devm_clk_get(&pdev->dev, "dfsdm");
if (IS_ERR(priv->clk)) { if (IS_ERR(priv->clk))
ret = PTR_ERR(priv->clk); return dev_err_probe(&pdev->dev, PTR_ERR(priv->clk),
if (ret != -EPROBE_DEFER) "Failed to get clock\n");
dev_err(&pdev->dev, "Failed to get clock (%d)\n", ret);
return ret;
}
priv->aclk = devm_clk_get(&pdev->dev, "audio"); priv->aclk = devm_clk_get(&pdev->dev, "audio");
if (IS_ERR(priv->aclk)) if (IS_ERR(priv->aclk))
......
...@@ -19,7 +19,6 @@ ...@@ -19,7 +19,6 @@
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/mod_devicetable.h> #include <linux/mod_devicetable.h>
#include <linux/acpi.h>
#include <linux/iio/iio.h> #include <linux/iio/iio.h>
#include <linux/iio/buffer.h> #include <linux/iio/buffer.h>
...@@ -153,17 +152,7 @@ static int adc081c_probe(struct i2c_client *client, ...@@ -153,17 +152,7 @@ static int adc081c_probe(struct i2c_client *client,
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
return -EOPNOTSUPP; return -EOPNOTSUPP;
if (ACPI_COMPANION(&client->dev)) { model = &adcxx1c_models[id->driver_data];
const struct acpi_device_id *ad_id;
ad_id = acpi_match_device(client->dev.driver->acpi_match_table,
&client->dev);
if (!ad_id)
return -ENODEV;
model = &adcxx1c_models[ad_id->driver_data];
} else {
model = &adcxx1c_models[id->driver_data];
}
iio = devm_iio_device_alloc(&client->dev, sizeof(*adc)); iio = devm_iio_device_alloc(&client->dev, sizeof(*adc));
if (!iio) if (!iio)
...@@ -238,21 +227,10 @@ static const struct of_device_id adc081c_of_match[] = { ...@@ -238,21 +227,10 @@ static const struct of_device_id adc081c_of_match[] = {
}; };
MODULE_DEVICE_TABLE(of, adc081c_of_match); MODULE_DEVICE_TABLE(of, adc081c_of_match);
#ifdef CONFIG_ACPI
static const struct acpi_device_id adc081c_acpi_match[] = {
{ "ADC081C", ADC081C },
{ "ADC101C", ADC101C },
{ "ADC121C", ADC121C },
{ }
};
MODULE_DEVICE_TABLE(acpi, adc081c_acpi_match);
#endif
static struct i2c_driver adc081c_driver = { static struct i2c_driver adc081c_driver = {
.driver = { .driver = {
.name = "adc081c", .name = "adc081c",
.of_match_table = adc081c_of_match, .of_match_table = adc081c_of_match,
.acpi_match_table = ACPI_PTR(adc081c_acpi_match),
}, },
.probe = adc081c_probe, .probe = adc081c_probe,
.remove = adc081c_remove, .remove = adc081c_remove,
......
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#include <linux/iio/trigger_consumer.h> #include <linux/iio/trigger_consumer.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/property.h> #include <linux/property.h>
#include <linux/regulator/consumer.h> #include <linux/regulator/consumer.h>
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
...@@ -299,13 +300,11 @@ static int adc108s102_remove(struct spi_device *spi) ...@@ -299,13 +300,11 @@ static int adc108s102_remove(struct spi_device *spi)
return 0; return 0;
} }
#ifdef CONFIG_OF
static const struct of_device_id adc108s102_of_match[] = { static const struct of_device_id adc108s102_of_match[] = {
{ .compatible = "ti,adc108s102" }, { .compatible = "ti,adc108s102" },
{ } { }
}; };
MODULE_DEVICE_TABLE(of, adc108s102_of_match); MODULE_DEVICE_TABLE(of, adc108s102_of_match);
#endif
#ifdef CONFIG_ACPI #ifdef CONFIG_ACPI
static const struct acpi_device_id adc108s102_acpi_ids[] = { static const struct acpi_device_id adc108s102_acpi_ids[] = {
...@@ -324,7 +323,7 @@ MODULE_DEVICE_TABLE(spi, adc108s102_id); ...@@ -324,7 +323,7 @@ MODULE_DEVICE_TABLE(spi, adc108s102_id);
static struct spi_driver adc108s102_driver = { static struct spi_driver adc108s102_driver = {
.driver = { .driver = {
.name = "adc108s102", .name = "adc108s102",
.of_match_table = of_match_ptr(adc108s102_of_match), .of_match_table = adc108s102_of_match,
.acpi_match_table = ACPI_PTR(adc108s102_acpi_ids), .acpi_match_table = ACPI_PTR(adc108s102_acpi_ids),
}, },
.probe = adc108s102_probe, .probe = adc108s102_probe,
......
...@@ -13,6 +13,7 @@ ...@@ -13,6 +13,7 @@
#include <linux/err.h> #include <linux/err.h>
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/iio/iio.h> #include <linux/iio/iio.h>
#include <linux/property.h> #include <linux/property.h>
#include <linux/regulator/consumer.h> #include <linux/regulator/consumer.h>
...@@ -220,7 +221,7 @@ MODULE_DEVICE_TABLE(acpi, adc128_acpi_match); ...@@ -220,7 +221,7 @@ MODULE_DEVICE_TABLE(acpi, adc128_acpi_match);
static struct spi_driver adc128_driver = { static struct spi_driver adc128_driver = {
.driver = { .driver = {
.name = "adc128s052", .name = "adc128s052",
.of_match_table = of_match_ptr(adc128_of_match), .of_match_table = adc128_of_match,
.acpi_match_table = ACPI_PTR(adc128_acpi_match), .acpi_match_table = ACPI_PTR(adc128_acpi_match),
}, },
.probe = adc128_probe, .probe = adc128_probe,
......
...@@ -276,11 +276,9 @@ static int rescale_probe(struct platform_device *pdev) ...@@ -276,11 +276,9 @@ static int rescale_probe(struct platform_device *pdev)
int ret; int ret;
source = devm_iio_channel_get(dev, NULL); source = devm_iio_channel_get(dev, NULL);
if (IS_ERR(source)) { if (IS_ERR(source))
if (PTR_ERR(source) != -EPROBE_DEFER) return dev_err_probe(dev, PTR_ERR(source),
dev_err(dev, "failed to get source channel\n"); "failed to get source channel\n");
return PTR_ERR(source);
}
sizeof_ext_info = iio_get_channel_ext_info_count(source); sizeof_ext_info = iio_get_channel_ext_info_count(source);
if (sizeof_ext_info) { if (sizeof_ext_info) {
......
...@@ -18,6 +18,7 @@ config AD8366 ...@@ -18,6 +18,7 @@ config AD8366
AD8366 Dual-Digital Variable Gain Amplifier (VGA) AD8366 Dual-Digital Variable Gain Amplifier (VGA)
ADA4961 BiCMOS RF Digital Gain Amplifier (DGA) ADA4961 BiCMOS RF Digital Gain Amplifier (DGA)
ADL5240 Digitally controlled variable gain amplifier (VGA) ADL5240 Digitally controlled variable gain amplifier (VGA)
HMC1119 0.25 dB LSB, 7-Bit, Silicon Digital Attenuator
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called ad8366. module will be called ad8366.
......
...@@ -201,12 +201,9 @@ static int hmc425a_probe(struct platform_device *pdev) ...@@ -201,12 +201,9 @@ static int hmc425a_probe(struct platform_device *pdev)
st->gain = st->chip_info->default_gain; st->gain = st->chip_info->default_gain;
st->gpios = devm_gpiod_get_array(&pdev->dev, "ctrl", GPIOD_OUT_LOW); st->gpios = devm_gpiod_get_array(&pdev->dev, "ctrl", GPIOD_OUT_LOW);
if (IS_ERR(st->gpios)) { if (IS_ERR(st->gpios))
ret = PTR_ERR(st->gpios); return dev_err_probe(&pdev->dev, PTR_ERR(st->gpios),
if (ret != -EPROBE_DEFER) "failed to get gpios\n");
dev_err(&pdev->dev, "failed to get gpios\n");
return ret;
}
if (st->gpios->ndescs != st->chip_info->num_gpios) { if (st->gpios->ndescs != st->chip_info->num_gpios) {
dev_err(&pdev->dev, "%d GPIOs needed to operate\n", dev_err(&pdev->dev, "%d GPIOs needed to operate\n",
......
...@@ -45,7 +45,8 @@ static struct dmaengine_buffer *iio_buffer_to_dmaengine_buffer( ...@@ -45,7 +45,8 @@ static struct dmaengine_buffer *iio_buffer_to_dmaengine_buffer(
return container_of(buffer, struct dmaengine_buffer, queue.buffer); return container_of(buffer, struct dmaengine_buffer, queue.buffer);
} }
static void iio_dmaengine_buffer_block_done(void *data) static void iio_dmaengine_buffer_block_done(void *data,
const struct dmaengine_result *result)
{ {
struct iio_dma_buffer_block *block = data; struct iio_dma_buffer_block *block = data;
unsigned long flags; unsigned long flags;
...@@ -53,6 +54,7 @@ static void iio_dmaengine_buffer_block_done(void *data) ...@@ -53,6 +54,7 @@ static void iio_dmaengine_buffer_block_done(void *data)
spin_lock_irqsave(&block->queue->list_lock, flags); spin_lock_irqsave(&block->queue->list_lock, flags);
list_del(&block->head); list_del(&block->head);
spin_unlock_irqrestore(&block->queue->list_lock, flags); spin_unlock_irqrestore(&block->queue->list_lock, flags);
block->bytes_used -= result->residue;
iio_dma_buffer_block_done(block); iio_dma_buffer_block_done(block);
} }
...@@ -74,7 +76,7 @@ static int iio_dmaengine_buffer_submit_block(struct iio_dma_buffer_queue *queue, ...@@ -74,7 +76,7 @@ static int iio_dmaengine_buffer_submit_block(struct iio_dma_buffer_queue *queue,
if (!desc) if (!desc)
return -ENOMEM; return -ENOMEM;
desc->callback = iio_dmaengine_buffer_block_done; desc->callback_result = iio_dmaengine_buffer_block_done;
desc->callback_param = block; desc->callback_param = block;
cookie = dmaengine_submit(desc); cookie = dmaengine_submit(desc);
......
...@@ -16,10 +16,13 @@ ...@@ -16,10 +16,13 @@
#include <linux/iio/iio.h> #include <linux/iio/iio.h>
#define ATLAS_EZO_DRV_NAME "atlas-ezo-sensor" #define ATLAS_EZO_DRV_NAME "atlas-ezo-sensor"
#define ATLAS_CO2_INT_TIME_IN_MS 950 #define ATLAS_INT_TIME_IN_MS 950
#define ATLAS_INT_HUM_TIME_IN_MS 350
enum { enum {
ATLAS_CO2_EZO, ATLAS_CO2_EZO,
ATLAS_O2_EZO,
ATLAS_HUM_EZO,
}; };
struct atlas_ezo_device { struct atlas_ezo_device {
...@@ -38,15 +41,37 @@ struct atlas_ezo_data { ...@@ -38,15 +41,37 @@ struct atlas_ezo_data {
u8 buffer[8]; u8 buffer[8];
}; };
#define ATLAS_CONCENTRATION_CHANNEL(_modifier) \
{ \
.type = IIO_CONCENTRATION, \
.modified = 1,\
.channel2 = _modifier, \
.info_mask_separate = \
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), \
.scan_index = 0, \
.scan_type = { \
.sign = 'u', \
.realbits = 32, \
.storagebits = 32, \
.endianness = IIO_CPU, \
}, \
}
static const struct iio_chan_spec atlas_co2_ezo_channels[] = { static const struct iio_chan_spec atlas_co2_ezo_channels[] = {
ATLAS_CONCENTRATION_CHANNEL(IIO_MOD_CO2),
};
static const struct iio_chan_spec atlas_o2_ezo_channels[] = {
ATLAS_CONCENTRATION_CHANNEL(IIO_MOD_O2),
};
static const struct iio_chan_spec atlas_hum_ezo_channels[] = {
{ {
.type = IIO_CONCENTRATION, .type = IIO_HUMIDITYRELATIVE,
.modified = 1,
.channel2 = IIO_MOD_CO2,
.info_mask_separate = .info_mask_separate =
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
.scan_index = 0, .scan_index = 0,
.scan_type = { .scan_type = {
.sign = 'u', .sign = 'u',
.realbits = 32, .realbits = 32,
.storagebits = 32, .storagebits = 32,
...@@ -59,10 +84,30 @@ static struct atlas_ezo_device atlas_ezo_devices[] = { ...@@ -59,10 +84,30 @@ static struct atlas_ezo_device atlas_ezo_devices[] = {
[ATLAS_CO2_EZO] = { [ATLAS_CO2_EZO] = {
.channels = atlas_co2_ezo_channels, .channels = atlas_co2_ezo_channels,
.num_channels = 1, .num_channels = 1,
.delay = ATLAS_CO2_INT_TIME_IN_MS, .delay = ATLAS_INT_TIME_IN_MS,
},
[ATLAS_O2_EZO] = {
.channels = atlas_o2_ezo_channels,
.num_channels = 1,
.delay = ATLAS_INT_TIME_IN_MS,
},
[ATLAS_HUM_EZO] = {
.channels = atlas_hum_ezo_channels,
.num_channels = 1,
.delay = ATLAS_INT_HUM_TIME_IN_MS,
}, },
}; };
static void atlas_ezo_sanitize(char *buf)
{
char *ptr = strchr(buf, '.');
if (!ptr)
return;
memmove(ptr, ptr + 1, strlen(ptr));
}
static int atlas_ezo_read_raw(struct iio_dev *indio_dev, static int atlas_ezo_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, struct iio_chan_spec const *chan,
int *val, int *val2, long mask) int *val, int *val2, long mask)
...@@ -96,6 +141,9 @@ static int atlas_ezo_read_raw(struct iio_dev *indio_dev, ...@@ -96,6 +141,9 @@ static int atlas_ezo_read_raw(struct iio_dev *indio_dev,
return -EBUSY; return -EBUSY;
} }
/* removing floating point for fixed number representation */
atlas_ezo_sanitize(data->buffer + 2);
ret = kstrtol(data->buffer + 1, 10, &tmp); ret = kstrtol(data->buffer + 1, 10, &tmp);
*val = tmp; *val = tmp;
...@@ -105,9 +153,27 @@ static int atlas_ezo_read_raw(struct iio_dev *indio_dev, ...@@ -105,9 +153,27 @@ static int atlas_ezo_read_raw(struct iio_dev *indio_dev,
return ret ? ret : IIO_VAL_INT; return ret ? ret : IIO_VAL_INT;
} }
case IIO_CHAN_INFO_SCALE: case IIO_CHAN_INFO_SCALE:
*val = 0; switch (chan->type) {
*val2 = 100; /* 0.0001 */ case IIO_HUMIDITYRELATIVE:
return IIO_VAL_INT_PLUS_MICRO; *val = 10;
return IIO_VAL_INT;
case IIO_CONCENTRATION:
break;
default:
return -EINVAL;
}
/* IIO_CONCENTRATION modifiers */
switch (chan->channel2) {
case IIO_MOD_CO2:
*val = 0;
*val2 = 100; /* 0.0001 */
return IIO_VAL_INT_PLUS_MICRO;
case IIO_MOD_O2:
*val = 100;
return IIO_VAL_INT;
}
return -EINVAL;
} }
return 0; return 0;
...@@ -119,12 +185,16 @@ static const struct iio_info atlas_info = { ...@@ -119,12 +185,16 @@ static const struct iio_info atlas_info = {
static const struct i2c_device_id atlas_ezo_id[] = { static const struct i2c_device_id atlas_ezo_id[] = {
{ "atlas-co2-ezo", ATLAS_CO2_EZO }, { "atlas-co2-ezo", ATLAS_CO2_EZO },
{ "atlas-o2-ezo", ATLAS_O2_EZO },
{ "atlas-hum-ezo", ATLAS_HUM_EZO },
{} {}
}; };
MODULE_DEVICE_TABLE(i2c, atlas_ezo_id); MODULE_DEVICE_TABLE(i2c, atlas_ezo_id);
static const struct of_device_id atlas_ezo_dt_ids[] = { static const struct of_device_id atlas_ezo_dt_ids[] = {
{ .compatible = "atlas,co2-ezo", .data = (void *)ATLAS_CO2_EZO, }, { .compatible = "atlas,co2-ezo", .data = (void *)ATLAS_CO2_EZO, },
{ .compatible = "atlas,o2-ezo", .data = (void *)ATLAS_O2_EZO, },
{ .compatible = "atlas,hum-ezo", .data = (void *)ATLAS_HUM_EZO, },
{} {}
}; };
MODULE_DEVICE_TABLE(of, atlas_ezo_dt_ids); MODULE_DEVICE_TABLE(of, atlas_ezo_dt_ids);
......
...@@ -705,13 +705,8 @@ int scd30_probe(struct device *dev, int irq, const char *name, void *priv, ...@@ -705,13 +705,8 @@ int scd30_probe(struct device *dev, int irq, const char *name, void *priv,
indio_dev->available_scan_masks = scd30_scan_masks; indio_dev->available_scan_masks = scd30_scan_masks;
state->vdd = devm_regulator_get(dev, "vdd"); state->vdd = devm_regulator_get(dev, "vdd");
if (IS_ERR(state->vdd)) { if (IS_ERR(state->vdd))
if (PTR_ERR(state->vdd) == -EPROBE_DEFER) return dev_err_probe(dev, PTR_ERR(state->vdd), "failed to get regulator\n");
return -EPROBE_DEFER;
dev_err(dev, "failed to get regulator\n");
return PTR_ERR(state->vdd);
}
ret = regulator_enable(state->vdd); ret = regulator_enable(state->vdd);
if (ret) if (ret)
......
...@@ -206,12 +206,12 @@ static const struct iio_chan_spec_ext_info ad5686_ext_info[] = { ...@@ -206,12 +206,12 @@ static const struct iio_chan_spec_ext_info ad5686_ext_info[] = {
} }
#define DECLARE_AD5693_CHANNELS(name, bits, _shift) \ #define DECLARE_AD5693_CHANNELS(name, bits, _shift) \
static struct iio_chan_spec name[] = { \ static const struct iio_chan_spec name[] = { \
AD5868_CHANNEL(0, 0, bits, _shift), \ AD5868_CHANNEL(0, 0, bits, _shift), \
} }
#define DECLARE_AD5686_CHANNELS(name, bits, _shift) \ #define DECLARE_AD5686_CHANNELS(name, bits, _shift) \
static struct iio_chan_spec name[] = { \ static const struct iio_chan_spec name[] = { \
AD5868_CHANNEL(0, 1, bits, _shift), \ AD5868_CHANNEL(0, 1, bits, _shift), \
AD5868_CHANNEL(1, 2, bits, _shift), \ AD5868_CHANNEL(1, 2, bits, _shift), \
AD5868_CHANNEL(2, 4, bits, _shift), \ AD5868_CHANNEL(2, 4, bits, _shift), \
...@@ -219,7 +219,7 @@ static struct iio_chan_spec name[] = { \ ...@@ -219,7 +219,7 @@ static struct iio_chan_spec name[] = { \
} }
#define DECLARE_AD5676_CHANNELS(name, bits, _shift) \ #define DECLARE_AD5676_CHANNELS(name, bits, _shift) \
static struct iio_chan_spec name[] = { \ static const struct iio_chan_spec name[] = { \
AD5868_CHANNEL(0, 0, bits, _shift), \ AD5868_CHANNEL(0, 0, bits, _shift), \
AD5868_CHANNEL(1, 1, bits, _shift), \ AD5868_CHANNEL(1, 1, bits, _shift), \
AD5868_CHANNEL(2, 2, bits, _shift), \ AD5868_CHANNEL(2, 2, bits, _shift), \
...@@ -231,7 +231,7 @@ static struct iio_chan_spec name[] = { \ ...@@ -231,7 +231,7 @@ static struct iio_chan_spec name[] = { \
} }
#define DECLARE_AD5679_CHANNELS(name, bits, _shift) \ #define DECLARE_AD5679_CHANNELS(name, bits, _shift) \
static struct iio_chan_spec name[] = { \ static const struct iio_chan_spec name[] = { \
AD5868_CHANNEL(0, 0, bits, _shift), \ AD5868_CHANNEL(0, 0, bits, _shift), \
AD5868_CHANNEL(1, 1, bits, _shift), \ AD5868_CHANNEL(1, 1, bits, _shift), \
AD5868_CHANNEL(2, 2, bits, _shift), \ AD5868_CHANNEL(2, 2, bits, _shift), \
......
...@@ -104,7 +104,7 @@ typedef int (*ad5686_read_func)(struct ad5686_state *st, u8 addr); ...@@ -104,7 +104,7 @@ typedef int (*ad5686_read_func)(struct ad5686_state *st, u8 addr);
struct ad5686_chip_info { struct ad5686_chip_info {
u16 int_vref_mv; u16 int_vref_mv;
unsigned int num_channels; unsigned int num_channels;
struct iio_chan_spec *channels; const struct iio_chan_spec *channels;
enum ad5686_regmap_type regmap_type; enum ad5686_regmap_type regmap_type;
}; };
......
...@@ -183,18 +183,14 @@ static int dpot_dac_probe(struct platform_device *pdev) ...@@ -183,18 +183,14 @@ static int dpot_dac_probe(struct platform_device *pdev)
indio_dev->num_channels = 1; indio_dev->num_channels = 1;
dac->vref = devm_regulator_get(dev, "vref"); dac->vref = devm_regulator_get(dev, "vref");
if (IS_ERR(dac->vref)) { if (IS_ERR(dac->vref))
if (PTR_ERR(dac->vref) != -EPROBE_DEFER) return dev_err_probe(&pdev->dev, PTR_ERR(dac->vref),
dev_err(&pdev->dev, "failed to get vref regulator\n"); "failed to get vref regulator\n");
return PTR_ERR(dac->vref);
}
dac->dpot = devm_iio_channel_get(dev, "dpot"); dac->dpot = devm_iio_channel_get(dev, "dpot");
if (IS_ERR(dac->dpot)) { if (IS_ERR(dac->dpot))
if (PTR_ERR(dac->dpot) != -EPROBE_DEFER) return dev_err_probe(&pdev->dev, PTR_ERR(dac->dpot),
dev_err(dev, "failed to get dpot input channel\n"); "failed to get dpot input channel\n");
return PTR_ERR(dac->dpot);
}
ret = iio_get_channel_type(dac->dpot, &type); ret = iio_get_channel_type(dac->dpot, &type);
if (ret < 0) if (ret < 0)
......
...@@ -150,10 +150,7 @@ static int stm32_dac_probe(struct platform_device *pdev) ...@@ -150,10 +150,7 @@ static int stm32_dac_probe(struct platform_device *pdev)
rst = devm_reset_control_get_optional_exclusive(dev, NULL); rst = devm_reset_control_get_optional_exclusive(dev, NULL);
if (rst) { if (rst) {
if (IS_ERR(rst)) { if (IS_ERR(rst)) {
ret = PTR_ERR(rst); ret = dev_err_probe(dev, PTR_ERR(rst), "reset get failed\n");
if (ret != -EPROBE_DEFER)
dev_err(dev, "reset get failed, %d\n", ret);
goto err_hw_stop; goto err_hw_stop;
} }
......
...@@ -47,8 +47,8 @@ struct dac5571_data { ...@@ -47,8 +47,8 @@ struct dac5571_data {
struct mutex lock; struct mutex lock;
struct regulator *vref; struct regulator *vref;
u16 val[4]; u16 val[4];
bool powerdown; bool powerdown[4];
u8 powerdown_mode; u8 powerdown_mode[4];
struct dac5571_spec const *spec; struct dac5571_spec const *spec;
int (*dac5571_cmd)(struct dac5571_data *data, int channel, u16 val); int (*dac5571_cmd)(struct dac5571_data *data, int channel, u16 val);
int (*dac5571_pwrdwn)(struct dac5571_data *data, int channel, u8 pwrdwn); int (*dac5571_pwrdwn)(struct dac5571_data *data, int channel, u8 pwrdwn);
...@@ -125,7 +125,7 @@ static int dac5571_get_powerdown_mode(struct iio_dev *indio_dev, ...@@ -125,7 +125,7 @@ static int dac5571_get_powerdown_mode(struct iio_dev *indio_dev,
{ {
struct dac5571_data *data = iio_priv(indio_dev); struct dac5571_data *data = iio_priv(indio_dev);
return data->powerdown_mode; return data->powerdown_mode[chan->channel];
} }
static int dac5571_set_powerdown_mode(struct iio_dev *indio_dev, static int dac5571_set_powerdown_mode(struct iio_dev *indio_dev,
...@@ -135,17 +135,17 @@ static int dac5571_set_powerdown_mode(struct iio_dev *indio_dev, ...@@ -135,17 +135,17 @@ static int dac5571_set_powerdown_mode(struct iio_dev *indio_dev,
struct dac5571_data *data = iio_priv(indio_dev); struct dac5571_data *data = iio_priv(indio_dev);
int ret = 0; int ret = 0;
if (data->powerdown_mode == mode) if (data->powerdown_mode[chan->channel] == mode)
return 0; return 0;
mutex_lock(&data->lock); mutex_lock(&data->lock);
if (data->powerdown) { if (data->powerdown[chan->channel]) {
ret = data->dac5571_pwrdwn(data, chan->channel, ret = data->dac5571_pwrdwn(data, chan->channel,
DAC5571_POWERDOWN(mode)); DAC5571_POWERDOWN(mode));
if (ret) if (ret)
goto out; goto out;
} }
data->powerdown_mode = mode; data->powerdown_mode[chan->channel] = mode;
out: out:
mutex_unlock(&data->lock); mutex_unlock(&data->lock);
...@@ -167,7 +167,7 @@ static ssize_t dac5571_read_powerdown(struct iio_dev *indio_dev, ...@@ -167,7 +167,7 @@ static ssize_t dac5571_read_powerdown(struct iio_dev *indio_dev,
{ {
struct dac5571_data *data = iio_priv(indio_dev); struct dac5571_data *data = iio_priv(indio_dev);
return sprintf(buf, "%d\n", data->powerdown); return sprintf(buf, "%d\n", data->powerdown[chan->channel]);
} }
static ssize_t dac5571_write_powerdown(struct iio_dev *indio_dev, static ssize_t dac5571_write_powerdown(struct iio_dev *indio_dev,
...@@ -183,19 +183,20 @@ static ssize_t dac5571_write_powerdown(struct iio_dev *indio_dev, ...@@ -183,19 +183,20 @@ static ssize_t dac5571_write_powerdown(struct iio_dev *indio_dev,
if (ret) if (ret)
return ret; return ret;
if (data->powerdown == powerdown) if (data->powerdown[chan->channel] == powerdown)
return len; return len;
mutex_lock(&data->lock); mutex_lock(&data->lock);
if (powerdown) if (powerdown)
ret = data->dac5571_pwrdwn(data, chan->channel, ret = data->dac5571_pwrdwn(data, chan->channel,
DAC5571_POWERDOWN(data->powerdown_mode)); DAC5571_POWERDOWN(data->powerdown_mode[chan->channel]));
else else
ret = data->dac5571_cmd(data, chan->channel, data->val[0]); ret = data->dac5571_cmd(data, chan->channel,
data->val[chan->channel]);
if (ret) if (ret)
goto out; goto out;
data->powerdown = powerdown; data->powerdown[chan->channel] = powerdown;
out: out:
mutex_unlock(&data->lock); mutex_unlock(&data->lock);
...@@ -209,9 +210,9 @@ static const struct iio_chan_spec_ext_info dac5571_ext_info[] = { ...@@ -209,9 +210,9 @@ static const struct iio_chan_spec_ext_info dac5571_ext_info[] = {
.name = "powerdown", .name = "powerdown",
.read = dac5571_read_powerdown, .read = dac5571_read_powerdown,
.write = dac5571_write_powerdown, .write = dac5571_write_powerdown,
.shared = IIO_SHARED_BY_TYPE, .shared = IIO_SEPARATE,
}, },
IIO_ENUM("powerdown_mode", IIO_SHARED_BY_TYPE, &dac5571_powerdown_mode), IIO_ENUM("powerdown_mode", IIO_SEPARATE, &dac5571_powerdown_mode),
IIO_ENUM_AVAILABLE("powerdown_mode", &dac5571_powerdown_mode), IIO_ENUM_AVAILABLE("powerdown_mode", &dac5571_powerdown_mode),
{}, {},
}; };
...@@ -276,7 +277,7 @@ static int dac5571_write_raw(struct iio_dev *indio_dev, ...@@ -276,7 +277,7 @@ static int dac5571_write_raw(struct iio_dev *indio_dev,
if (val >= (1 << data->spec->resolution) || val < 0) if (val >= (1 << data->spec->resolution) || val < 0)
return -EINVAL; return -EINVAL;
if (data->powerdown) if (data->powerdown[chan->channel])
return -EBUSY; return -EBUSY;
mutex_lock(&data->lock); mutex_lock(&data->lock);
......
...@@ -969,6 +969,13 @@ static int ad9523_setup(struct iio_dev *indio_dev) ...@@ -969,6 +969,13 @@ static int ad9523_setup(struct iio_dev *indio_dev)
return 0; return 0;
} }
static void ad9523_reg_disable(void *data)
{
struct regulator *reg = data;
regulator_disable(reg);
}
static int ad9523_probe(struct spi_device *spi) static int ad9523_probe(struct spi_device *spi)
{ {
struct ad9523_platform_data *pdata = spi->dev.platform_data; struct ad9523_platform_data *pdata = spi->dev.platform_data;
...@@ -994,21 +1001,22 @@ static int ad9523_probe(struct spi_device *spi) ...@@ -994,21 +1001,22 @@ static int ad9523_probe(struct spi_device *spi)
ret = regulator_enable(st->reg); ret = regulator_enable(st->reg);
if (ret) if (ret)
return ret; return ret;
ret = devm_add_action_or_reset(&spi->dev, ad9523_reg_disable,
st->reg);
if (ret)
return ret;
} }
st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown", st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
GPIOD_OUT_HIGH); GPIOD_OUT_HIGH);
if (IS_ERR(st->pwrdown_gpio)) { if (IS_ERR(st->pwrdown_gpio))
ret = PTR_ERR(st->pwrdown_gpio); return PTR_ERR(st->pwrdown_gpio);
goto error_disable_reg;
}
st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
GPIOD_OUT_LOW); GPIOD_OUT_LOW);
if (IS_ERR(st->reset_gpio)) { if (IS_ERR(st->reset_gpio))
ret = PTR_ERR(st->reset_gpio); return PTR_ERR(st->reset_gpio);
goto error_disable_reg;
}
if (st->reset_gpio) { if (st->reset_gpio) {
udelay(1); udelay(1);
...@@ -1017,10 +1025,8 @@ static int ad9523_probe(struct spi_device *spi) ...@@ -1017,10 +1025,8 @@ static int ad9523_probe(struct spi_device *spi)
st->sync_gpio = devm_gpiod_get_optional(&spi->dev, "sync", st->sync_gpio = devm_gpiod_get_optional(&spi->dev, "sync",
GPIOD_OUT_HIGH); GPIOD_OUT_HIGH);
if (IS_ERR(st->sync_gpio)) { if (IS_ERR(st->sync_gpio))
ret = PTR_ERR(st->sync_gpio); return PTR_ERR(st->sync_gpio);
goto error_disable_reg;
}
spi_set_drvdata(spi, indio_dev); spi_set_drvdata(spi, indio_dev);
st->spi = spi; st->spi = spi;
...@@ -1035,34 +1041,9 @@ static int ad9523_probe(struct spi_device *spi) ...@@ -1035,34 +1041,9 @@ static int ad9523_probe(struct spi_device *spi)
ret = ad9523_setup(indio_dev); ret = ad9523_setup(indio_dev);
if (ret < 0) if (ret < 0)
goto error_disable_reg; return ret;
ret = iio_device_register(indio_dev);
if (ret)
goto error_disable_reg;
dev_info(&spi->dev, "probed %s\n", indio_dev->name);
return 0;
error_disable_reg:
if (!IS_ERR(st->reg))
regulator_disable(st->reg);
return ret;
}
static int ad9523_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct ad9523_state *st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
if (!IS_ERR(st->reg))
regulator_disable(st->reg);
return 0; return devm_iio_device_register(&spi->dev, indio_dev);
} }
static const struct spi_device_id ad9523_id[] = { static const struct spi_device_id ad9523_id[] = {
...@@ -1076,7 +1057,6 @@ static struct spi_driver ad9523_driver = { ...@@ -1076,7 +1057,6 @@ static struct spi_driver ad9523_driver = {
.name = "ad9523", .name = "ad9523",
}, },
.probe = ad9523_probe, .probe = ad9523_probe,
.remove = ad9523_remove,
.id_table = ad9523_id, .id_table = ad9523_id,
}; };
module_spi_driver(ad9523_driver); module_spi_driver(ad9523_driver);
......
...@@ -41,6 +41,16 @@ config ADIS16260 ...@@ -41,6 +41,16 @@ config ADIS16260
This driver can also be built as a module. If so, the module This driver can also be built as a module. If so, the module
will be called adis16260. will be called adis16260.
config ADXRS290
tristate "Analog Devices ADXRS290 Dual-Axis MEMS Gyroscope SPI driver"
depends on SPI
help
Say yes here to build support for Analog Devices ADXRS290 programmable
digital output gyroscope.
This driver can also be built as a module. If so, the module will be
called adxrs290.
config ADXRS450 config ADXRS450
tristate "Analog Devices ADXRS450/3 Digital Output Gyroscope SPI driver" tristate "Analog Devices ADXRS450/3 Digital Output Gyroscope SPI driver"
depends on SPI depends on SPI
......
...@@ -8,6 +8,7 @@ obj-$(CONFIG_ADIS16080) += adis16080.o ...@@ -8,6 +8,7 @@ obj-$(CONFIG_ADIS16080) += adis16080.o
obj-$(CONFIG_ADIS16130) += adis16130.o obj-$(CONFIG_ADIS16130) += adis16130.o
obj-$(CONFIG_ADIS16136) += adis16136.o obj-$(CONFIG_ADIS16136) += adis16136.o
obj-$(CONFIG_ADIS16260) += adis16260.o obj-$(CONFIG_ADIS16260) += adis16260.o
obj-$(CONFIG_ADXRS290) += adxrs290.o
obj-$(CONFIG_ADXRS450) += adxrs450.o obj-$(CONFIG_ADXRS450) += adxrs450.o
obj-$(CONFIG_BMG160) += bmg160_core.o obj-$(CONFIG_BMG160) += bmg160_core.o
obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o
......
This diff is collapsed.
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
/* /*
* max30102.c - Support for MAX30102 heart rate and pulse oximeter sensor * max30102.c - Support for MAX30102 heart rate and pulse oximeter sensor
* *
* Copyright (C) 2017 Matt Ranostay <matt@ranostay.consulting> * Copyright (C) 2017 Matt Ranostay <matt.ranostay@konsulko.com>
* *
* Support for MAX30105 optical particle sensor * Support for MAX30105 optical particle sensor
* Copyright (C) 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net> * Copyright (C) 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net>
...@@ -632,6 +632,6 @@ static struct i2c_driver max30102_driver = { ...@@ -632,6 +632,6 @@ static struct i2c_driver max30102_driver = {
}; };
module_i2c_driver(max30102_driver); module_i2c_driver(max30102_driver);
MODULE_AUTHOR("Matt Ranostay <matt@ranostay.consulting>"); MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
MODULE_DESCRIPTION("MAX30102 heart rate/pulse oximeter and MAX30105 particle sensor driver"); MODULE_DESCRIPTION("MAX30102 heart rate/pulse oximeter and MAX30105 particle sensor driver");
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
...@@ -38,6 +38,16 @@ config HDC100X ...@@ -38,6 +38,16 @@ config HDC100X
To compile this driver as a module, choose M here: the module To compile this driver as a module, choose M here: the module
will be called hdc100x. will be called hdc100x.
config HDC2010
tristate "TI HDC2010 relative humidity and temperature sensor"
depends on I2C
help
Say yes here to build support for the Texas Instruments
HDC2010 and HDC2080 relative humidity and temperature sensors.
To compile this driver as a module, choose M here: the module
will be called hdc2010.
config HID_SENSOR_HUMIDITY config HID_SENSOR_HUMIDITY
tristate "HID Environmental humidity sensor" tristate "HID Environmental humidity sensor"
depends on HID_SENSOR_HUB depends on HID_SENSOR_HUB
......
...@@ -6,6 +6,7 @@ ...@@ -6,6 +6,7 @@
obj-$(CONFIG_AM2315) += am2315.o obj-$(CONFIG_AM2315) += am2315.o
obj-$(CONFIG_DHT11) += dht11.o obj-$(CONFIG_DHT11) += dht11.o
obj-$(CONFIG_HDC100X) += hdc100x.o obj-$(CONFIG_HDC100X) += hdc100x.o
obj-$(CONFIG_HDC2010) += hdc2010.o
obj-$(CONFIG_HID_SENSOR_HUMIDITY) += hid-sensor-humidity.o obj-$(CONFIG_HID_SENSOR_HUMIDITY) += hid-sensor-humidity.o
hts221-y := hts221_core.o \ hts221-y := hts221_core.o \
......
// SPDX-License-Identifier: GPL-2.0+
/*
* hdc2010.c - Support for the TI HDC2010 and HDC2080
* temperature + relative humidity sensors
*
* Copyright (C) 2020 Norphonic AS
* Author: Eugene Zaikonnikov <ez@norphonic.com>
*
* Datasheet: https://www.ti.com/product/HDC2010/datasheet
* Datasheet: https://www.ti.com/product/HDC2080/datasheet
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/bitops.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#define HDC2010_REG_TEMP_LOW 0x00
#define HDC2010_REG_TEMP_HIGH 0x01
#define HDC2010_REG_HUMIDITY_LOW 0x02
#define HDC2010_REG_HUMIDITY_HIGH 0x03
#define HDC2010_REG_INTERRUPT_DRDY 0x04
#define HDC2010_REG_TEMP_MAX 0x05
#define HDC2010_REG_HUMIDITY_MAX 0x06
#define HDC2010_REG_INTERRUPT_EN 0x07
#define HDC2010_REG_TEMP_OFFSET_ADJ 0x08
#define HDC2010_REG_HUMIDITY_OFFSET_ADJ 0x09
#define HDC2010_REG_TEMP_THR_L 0x0a
#define HDC2010_REG_TEMP_THR_H 0x0b
#define HDC2010_REG_RH_THR_L 0x0c
#define HDC2010_REG_RH_THR_H 0x0d
#define HDC2010_REG_RESET_DRDY_INT_CONF 0x0e
#define HDC2010_REG_MEASUREMENT_CONF 0x0f
#define HDC2010_MEAS_CONF GENMASK(2, 1)
#define HDC2010_MEAS_TRIG BIT(0)
#define HDC2010_HEATER_EN BIT(3)
#define HDC2010_AMM GENMASK(6, 4)
struct hdc2010_data {
struct i2c_client *client;
struct mutex lock;
u8 measurement_config;
u8 interrupt_config;
u8 drdy_config;
};
enum hdc2010_addr_groups {
HDC2010_GROUP_TEMP = 0,
HDC2010_GROUP_HUMIDITY,
};
struct hdc2010_reg_record {
unsigned long primary;
unsigned long peak;
};
static const struct hdc2010_reg_record hdc2010_reg_translation[] = {
[HDC2010_GROUP_TEMP] = {
.primary = HDC2010_REG_TEMP_LOW,
.peak = HDC2010_REG_TEMP_MAX,
},
[HDC2010_GROUP_HUMIDITY] = {
.primary = HDC2010_REG_HUMIDITY_LOW,
.peak = HDC2010_REG_HUMIDITY_MAX,
},
};
static IIO_CONST_ATTR(out_current_heater_raw_available, "0 1");
static struct attribute *hdc2010_attributes[] = {
&iio_const_attr_out_current_heater_raw_available.dev_attr.attr,
NULL
};
static const struct attribute_group hdc2010_attribute_group = {
.attrs = hdc2010_attributes,
};
static const struct iio_chan_spec hdc2010_channels[] = {
{
.type = IIO_TEMP,
.address = HDC2010_GROUP_TEMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_PEAK) |
BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE),
},
{
.type = IIO_HUMIDITYRELATIVE,
.address = HDC2010_GROUP_HUMIDITY,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_PEAK) |
BIT(IIO_CHAN_INFO_SCALE),
},
{
.type = IIO_CURRENT,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.extend_name = "heater",
.output = 1,
},
};
static int hdc2010_update_drdy_config(struct hdc2010_data *data,
char mask, char val)
{
u8 tmp = (~mask & data->drdy_config) | val;
int ret;
ret = i2c_smbus_write_byte_data(data->client,
HDC2010_REG_RESET_DRDY_INT_CONF, tmp);
if (ret)
return ret;
data->drdy_config = tmp;
return 0;
}
static int hdc2010_get_prim_measurement_word(struct hdc2010_data *data,
struct iio_chan_spec const *chan)
{
struct i2c_client *client = data->client;
s32 ret;
ret = i2c_smbus_read_word_data(client,
hdc2010_reg_translation[chan->address].primary);
if (ret < 0)
dev_err(&client->dev, "Could not read sensor measurement word\n");
return ret;
}
static int hdc2010_get_peak_measurement_byte(struct hdc2010_data *data,
struct iio_chan_spec const *chan)
{
struct i2c_client *client = data->client;
s32 ret;
ret = i2c_smbus_read_byte_data(client,
hdc2010_reg_translation[chan->address].peak);
if (ret < 0)
dev_err(&client->dev, "Could not read sensor measurement byte\n");
return ret;
}
static int hdc2010_get_heater_status(struct hdc2010_data *data)
{
return !!(data->drdy_config & HDC2010_HEATER_EN);
}
static int hdc2010_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val,
int *val2, long mask)
{
struct hdc2010_data *data = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW: {
int ret;
if (chan->type == IIO_CURRENT) {
*val = hdc2010_get_heater_status(data);
return IIO_VAL_INT;
}
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
return ret;
mutex_lock(&data->lock);
ret = hdc2010_get_prim_measurement_word(data, chan);
mutex_unlock(&data->lock);
iio_device_release_direct_mode(indio_dev);
if (ret < 0)
return ret;
*val = ret;
return IIO_VAL_INT;
}
case IIO_CHAN_INFO_PEAK: {
int ret;
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
return ret;
mutex_lock(&data->lock);
ret = hdc2010_get_peak_measurement_byte(data, chan);
mutex_unlock(&data->lock);
iio_device_release_direct_mode(indio_dev);
if (ret < 0)
return ret;
/* Scaling up the value so we can use same offset as RAW */
*val = ret * 256;
return IIO_VAL_INT;
}
case IIO_CHAN_INFO_SCALE:
*val2 = 65536;
if (chan->type == IIO_TEMP)
*val = 165000;
else
*val = 100000;
return IIO_VAL_FRACTIONAL;
case IIO_CHAN_INFO_OFFSET:
*val = -15887;
*val2 = 515151;
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
}
static int hdc2010_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct hdc2010_data *data = iio_priv(indio_dev);
int new, ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
if (chan->type != IIO_CURRENT || val2 != 0)
return -EINVAL;
switch (val) {
case 1:
new = HDC2010_HEATER_EN;
break;
case 0:
new = 0;
break;
default:
return -EINVAL;
}
mutex_lock(&data->lock);
ret = hdc2010_update_drdy_config(data, HDC2010_HEATER_EN, new);
mutex_unlock(&data->lock);
return ret;
default:
return -EINVAL;
}
}
static const struct iio_info hdc2010_info = {
.read_raw = hdc2010_read_raw,
.write_raw = hdc2010_write_raw,
.attrs = &hdc2010_attribute_group,
};
static int hdc2010_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct iio_dev *indio_dev;
struct hdc2010_data *data;
u8 tmp;
int ret;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
return -EOPNOTSUPP;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
i2c_set_clientdata(client, indio_dev);
data->client = client;
mutex_init(&data->lock);
indio_dev->dev.parent = &client->dev;
/*
* As DEVICE ID register does not differentiate between
* HDC2010 and HDC2080, we have the name hardcoded
*/
indio_dev->name = "hdc2010";
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &hdc2010_info;
indio_dev->channels = hdc2010_channels;
indio_dev->num_channels = ARRAY_SIZE(hdc2010_channels);
/* Enable Automatic Measurement Mode at 5Hz */
ret = hdc2010_update_drdy_config(data, HDC2010_AMM, HDC2010_AMM);
if (ret)
return ret;
/*
* We enable both temp and humidity measurement.
* However the measurement won't start even in AMM until triggered.
*/
tmp = (data->measurement_config & ~HDC2010_MEAS_CONF) |
HDC2010_MEAS_TRIG;
ret = i2c_smbus_write_byte_data(client, HDC2010_REG_MEASUREMENT_CONF, tmp);
if (ret) {
dev_warn(&client->dev, "Unable to set up measurement\n");
if (hdc2010_update_drdy_config(data, HDC2010_AMM, 0))
dev_warn(&client->dev, "Unable to restore default AMM\n");
return ret;
}
data->measurement_config = tmp;
return iio_device_register(indio_dev);
}
static int hdc2010_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct hdc2010_data *data = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
/* Disable Automatic Measurement Mode */
if (hdc2010_update_drdy_config(data, HDC2010_AMM, 0))
dev_warn(&client->dev, "Unable to restore default AMM\n");
return 0;
}
static const struct i2c_device_id hdc2010_id[] = {
{ "hdc2010" },
{ "hdc2080" },
{ }
};
MODULE_DEVICE_TABLE(i2c, hdc2010_id);
static const struct of_device_id hdc2010_dt_ids[] = {
{ .compatible = "ti,hdc2010" },
{ .compatible = "ti,hdc2080" },
{ }
};
MODULE_DEVICE_TABLE(of, hdc2010_dt_ids);
static struct i2c_driver hdc2010_driver = {
.driver = {
.name = "hdc2010",
.of_match_table = hdc2010_dt_ids,
},
.probe = hdc2010_probe,
.remove = hdc2010_remove,
.id_table = hdc2010_id,
};
module_i2c_driver(hdc2010_driver);
MODULE_AUTHOR("Eugene Zaikonnikov <ez@norphonic.com>");
MODULE_DESCRIPTION("TI HDC2010 humidity and temperature sensor driver");
MODULE_LICENSE("GPL");
...@@ -30,7 +30,7 @@ int iio_trigger_detach_poll_func(struct iio_trigger *trig, ...@@ -30,7 +30,7 @@ int iio_trigger_detach_poll_func(struct iio_trigger *trig,
* iio_device_register_trigger_consumer() - set up an iio_dev to use triggers * iio_device_register_trigger_consumer() - set up an iio_dev to use triggers
* @indio_dev: iio_dev associated with the device that will consume the trigger * @indio_dev: iio_dev associated with the device that will consume the trigger
**/ **/
static int iio_device_register_trigger_consumer(struct iio_dev *indio_dev) static inline int iio_device_register_trigger_consumer(struct iio_dev *indio_dev)
{ {
return 0; return 0;
} }
...@@ -39,7 +39,7 @@ static int iio_device_register_trigger_consumer(struct iio_dev *indio_dev) ...@@ -39,7 +39,7 @@ static int iio_device_register_trigger_consumer(struct iio_dev *indio_dev)
* iio_device_unregister_trigger_consumer() - reverse the registration process * iio_device_unregister_trigger_consumer() - reverse the registration process
* @indio_dev: iio_dev associated with the device that consumed the trigger * @indio_dev: iio_dev associated with the device that consumed the trigger
**/ **/
static void iio_device_unregister_trigger_consumer(struct iio_dev *indio_dev) static inline void iio_device_unregister_trigger_consumer(struct iio_dev *indio_dev)
{ {
} }
......
...@@ -1475,22 +1475,14 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, ...@@ -1475,22 +1475,14 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
} }
st->vdd_supply = devm_regulator_get(dev, "vdd"); st->vdd_supply = devm_regulator_get(dev, "vdd");
if (IS_ERR(st->vdd_supply)) { if (IS_ERR(st->vdd_supply))
if (PTR_ERR(st->vdd_supply) != -EPROBE_DEFER) return dev_err_probe(dev, PTR_ERR(st->vdd_supply),
dev_err(dev, "Failed to get vdd regulator %d\n", "Failed to get vdd regulator\n");
(int)PTR_ERR(st->vdd_supply));
return PTR_ERR(st->vdd_supply);
}
st->vddio_supply = devm_regulator_get(dev, "vddio"); st->vddio_supply = devm_regulator_get(dev, "vddio");
if (IS_ERR(st->vddio_supply)) { if (IS_ERR(st->vddio_supply))
if (PTR_ERR(st->vddio_supply) != -EPROBE_DEFER) return dev_err_probe(dev, PTR_ERR(st->vddio_supply),
dev_err(dev, "Failed to get vddio regulator %d\n", "Failed to get vddio regulator\n");
(int)PTR_ERR(st->vddio_supply));
return PTR_ERR(st->vddio_supply);
}
result = regulator_enable(st->vdd_supply); result = regulator_enable(st->vdd_supply);
if (result) { if (result) {
......
...@@ -133,6 +133,7 @@ static const char * const iio_modifier_names[] = { ...@@ -133,6 +133,7 @@ static const char * const iio_modifier_names[] = {
[IIO_MOD_PM10] = "pm10", [IIO_MOD_PM10] = "pm10",
[IIO_MOD_ETHANOL] = "ethanol", [IIO_MOD_ETHANOL] = "ethanol",
[IIO_MOD_H2] = "h2", [IIO_MOD_H2] = "h2",
[IIO_MOD_O2] = "o2",
}; };
/* relies on pairs of these shared then separate */ /* relies on pairs of these shared then separate */
......
...@@ -86,6 +86,21 @@ config APDS9960 ...@@ -86,6 +86,21 @@ config APDS9960
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called apds9960 module will be called apds9960
config AS73211
tristate "AMS AS73211 XYZ color sensor"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
If you say yes here you get support for the AMS AS73211
JENCOLOR(R) Digital XYZ Sensor.
For triggered measurements, you will need an additional trigger driver
like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER.
This driver can also be built as a module. If so, the module
will be called as73211.
config BH1750 config BH1750
tristate "ROHM BH1750 ambient light sensor" tristate "ROHM BH1750 ambient light sensor"
depends on I2C depends on I2C
......
...@@ -11,6 +11,7 @@ obj-$(CONFIG_AL3010) += al3010.o ...@@ -11,6 +11,7 @@ obj-$(CONFIG_AL3010) += al3010.o
obj-$(CONFIG_AL3320A) += al3320a.o obj-$(CONFIG_AL3320A) += al3320a.o
obj-$(CONFIG_APDS9300) += apds9300.o obj-$(CONFIG_APDS9300) += apds9300.o
obj-$(CONFIG_APDS9960) += apds9960.o obj-$(CONFIG_APDS9960) += apds9960.o
obj-$(CONFIG_AS73211) += as73211.o
obj-$(CONFIG_BH1750) += bh1750.o obj-$(CONFIG_BH1750) += bh1750.o
obj-$(CONFIG_BH1780) += bh1780.o obj-$(CONFIG_BH1780) += bh1780.o
obj-$(CONFIG_CM32181) += cm32181.o obj-$(CONFIG_CM32181) += cm32181.o
......
This diff is collapsed.
...@@ -746,12 +746,9 @@ static int isl29018_probe(struct i2c_client *client, ...@@ -746,12 +746,9 @@ static int isl29018_probe(struct i2c_client *client,
chip->suspended = false; chip->suspended = false;
chip->vcc_reg = devm_regulator_get(&client->dev, "vcc"); chip->vcc_reg = devm_regulator_get(&client->dev, "vcc");
if (IS_ERR(chip->vcc_reg)) { if (IS_ERR(chip->vcc_reg))
err = PTR_ERR(chip->vcc_reg); return dev_err_probe(&client->dev, PTR_ERR(chip->vcc_reg),
if (err != -EPROBE_DEFER) "failed to get VCC regulator!\n");
dev_err(&client->dev, "failed to get VCC regulator!\n");
return err;
}
err = regulator_enable(chip->vcc_reg); err = regulator_enable(chip->vcc_reg);
if (err) { if (err) {
......
...@@ -1776,14 +1776,8 @@ static int tsl2772_probe(struct i2c_client *clientp, ...@@ -1776,14 +1776,8 @@ static int tsl2772_probe(struct i2c_client *clientp,
ret = devm_regulator_bulk_get(&clientp->dev, ret = devm_regulator_bulk_get(&clientp->dev,
ARRAY_SIZE(chip->supplies), ARRAY_SIZE(chip->supplies),
chip->supplies); chip->supplies);
if (ret < 0) { if (ret < 0)
if (ret != -EPROBE_DEFER) return dev_err_probe(&clientp->dev, ret, "Failed to get regulators\n");
dev_err(&clientp->dev,
"Failed to get regulators: %d\n",
ret);
return ret;
}
ret = regulator_bulk_enable(ARRAY_SIZE(chip->supplies), chip->supplies); ret = regulator_bulk_enable(ARRAY_SIZE(chip->supplies), chip->supplies);
if (ret < 0) { if (ret < 0) {
......
...@@ -843,15 +843,8 @@ static int ak8974_probe(struct i2c_client *i2c, ...@@ -843,15 +843,8 @@ static int ak8974_probe(struct i2c_client *i2c,
ret = devm_regulator_bulk_get(&i2c->dev, ret = devm_regulator_bulk_get(&i2c->dev,
ARRAY_SIZE(ak8974->regs), ARRAY_SIZE(ak8974->regs),
ak8974->regs); ak8974->regs);
if (ret < 0) { if (ret < 0)
if (ret != -EPROBE_DEFER) return dev_err_probe(&i2c->dev, ret, "cannot get regulators\n");
dev_err(&i2c->dev, "cannot get regulators: %d\n", ret);
else
dev_dbg(&i2c->dev,
"regulators unavailable, deferring probe\n");
return ret;
}
ret = regulator_bulk_enable(ARRAY_SIZE(ak8974->regs), ak8974->regs); ret = regulator_bulk_enable(ARRAY_SIZE(ak8974->regs), ak8974->regs);
if (ret < 0) { if (ret < 0) {
......
...@@ -476,22 +476,14 @@ static int mag3110_probe(struct i2c_client *client, ...@@ -476,22 +476,14 @@ static int mag3110_probe(struct i2c_client *client,
data = iio_priv(indio_dev); data = iio_priv(indio_dev);
data->vdd_reg = devm_regulator_get(&client->dev, "vdd"); data->vdd_reg = devm_regulator_get(&client->dev, "vdd");
if (IS_ERR(data->vdd_reg)) { if (IS_ERR(data->vdd_reg))
if (PTR_ERR(data->vdd_reg) == -EPROBE_DEFER) return dev_err_probe(&client->dev, PTR_ERR(data->vdd_reg),
return -EPROBE_DEFER; "failed to get VDD regulator!\n");
dev_err(&client->dev, "failed to get VDD regulator!\n");
return PTR_ERR(data->vdd_reg);
}
data->vddio_reg = devm_regulator_get(&client->dev, "vddio"); data->vddio_reg = devm_regulator_get(&client->dev, "vddio");
if (IS_ERR(data->vddio_reg)) { if (IS_ERR(data->vddio_reg))
if (PTR_ERR(data->vddio_reg) == -EPROBE_DEFER) return dev_err_probe(&client->dev, PTR_ERR(data->vddio_reg),
return -EPROBE_DEFER; "failed to get VDDIO regulator!\n");
dev_err(&client->dev, "failed to get VDDIO regulator!\n");
return PTR_ERR(data->vddio_reg);
}
ret = regulator_enable(data->vdd_reg); ret = regulator_enable(data->vdd_reg);
if (ret) { if (ret) {
......
...@@ -354,11 +354,9 @@ static int mux_probe(struct platform_device *pdev) ...@@ -354,11 +354,9 @@ static int mux_probe(struct platform_device *pdev)
return -ENODEV; return -ENODEV;
parent = devm_iio_channel_get(dev, "parent"); parent = devm_iio_channel_get(dev, "parent");
if (IS_ERR(parent)) { if (IS_ERR(parent))
if (PTR_ERR(parent) != -EPROBE_DEFER) return dev_err_probe(dev, PTR_ERR(parent),
dev_err(dev, "failed to get parent channel\n"); "failed to get parent channel\n");
return PTR_ERR(parent);
}
sizeof_ext_info = iio_get_channel_ext_info_count(parent); sizeof_ext_info = iio_get_channel_ext_info_count(parent);
if (sizeof_ext_info) { if (sizeof_ext_info) {
......
This diff is collapsed.
This diff is collapsed.
...@@ -9,7 +9,7 @@ The aim is to fill the gap between the somewhat similar hwmon and ...@@ -9,7 +9,7 @@ The aim is to fill the gap between the somewhat similar hwmon and
input subsystems. Hwmon is very much directed at low sample rate input subsystems. Hwmon is very much directed at low sample rate
sensors used in applications such as fan speed control and temperature sensors used in applications such as fan speed control and temperature
measurement. Input is, as its name suggests focused on input measurement. Input is, as its name suggests focused on input
devices. In some cases there is considerable overlap between these and devices. In some cases, there is considerable overlap between these and
IIO. IIO.
A typical device falling into this category would be connected via SPI A typical device falling into this category would be connected via SPI
...@@ -38,7 +38,7 @@ series and Analog Devices ADXL345 accelerometers. Each buffer supports ...@@ -38,7 +38,7 @@ series and Analog Devices ADXL345 accelerometers. Each buffer supports
polling to establish when data is available. polling to establish when data is available.
* Trigger and software buffer support. In many data analysis * Trigger and software buffer support. In many data analysis
applications it it useful to be able to capture data based on some applications it is useful to be able to capture data based on some
external signal (trigger). These triggers might be a data ready external signal (trigger). These triggers might be a data ready
signal, a gpio line connected to some external system or an on signal, a gpio line connected to some external system or an on
processor periodic interrupt. A single trigger may initialize data processor periodic interrupt. A single trigger may initialize data
......
...@@ -397,7 +397,6 @@ static int ad9834_probe(struct spi_device *spi) ...@@ -397,7 +397,6 @@ static int ad9834_probe(struct spi_device *spi)
struct regulator *reg; struct regulator *reg;
int ret; int ret;
reg = devm_regulator_get(&spi->dev, "avdd"); reg = devm_regulator_get(&spi->dev, "avdd");
if (IS_ERR(reg)) if (IS_ERR(reg))
return PTR_ERR(reg); return PTR_ERR(reg);
......
...@@ -40,7 +40,7 @@ enum ad7793_bias_voltage { ...@@ -40,7 +40,7 @@ enum ad7793_bias_voltage {
* enum ad7793_refsel - AD7793 reference voltage selection * enum ad7793_refsel - AD7793 reference voltage selection
* @AD7793_REFSEL_REFIN1: External reference applied between REFIN1(+) * @AD7793_REFSEL_REFIN1: External reference applied between REFIN1(+)
* and REFIN1(-). * and REFIN1(-).
* @AD7793_REFSEL_REFIN2: External reference applied between REFIN2(+) and * @AD7793_REFSEL_REFIN2: External reference applied between REFIN2(+)
* and REFIN1(-). Only valid for AD7795/AD7796. * and REFIN1(-). Only valid for AD7795/AD7796.
* @AD7793_REFSEL_INTERNAL: Internal 1.17 V reference. * @AD7793_REFSEL_INTERNAL: Internal 1.17 V reference.
*/ */
......
...@@ -94,6 +94,7 @@ enum iio_modifier { ...@@ -94,6 +94,7 @@ enum iio_modifier {
IIO_MOD_PM10, IIO_MOD_PM10,
IIO_MOD_ETHANOL, IIO_MOD_ETHANOL,
IIO_MOD_H2, IIO_MOD_H2,
IIO_MOD_O2,
}; };
enum iio_event_type { enum iio_event_type {
......
...@@ -119,6 +119,7 @@ static const char * const iio_modifier_names[] = { ...@@ -119,6 +119,7 @@ static const char * const iio_modifier_names[] = {
[IIO_MOD_PM2P5] = "pm2p5", [IIO_MOD_PM2P5] = "pm2p5",
[IIO_MOD_PM4] = "pm4", [IIO_MOD_PM4] = "pm4",
[IIO_MOD_PM10] = "pm10", [IIO_MOD_PM10] = "pm10",
[IIO_MOD_O2] = "o2",
}; };
static bool event_is_known(struct iio_event_data *event) static bool event_is_known(struct iio_event_data *event)
...@@ -211,6 +212,7 @@ static bool event_is_known(struct iio_event_data *event) ...@@ -211,6 +212,7 @@ static bool event_is_known(struct iio_event_data *event)
case IIO_MOD_PM2P5: case IIO_MOD_PM2P5:
case IIO_MOD_PM4: case IIO_MOD_PM4:
case IIO_MOD_PM10: case IIO_MOD_PM10:
case IIO_MOD_O2:
break; break;
default: default:
return false; return false;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment