net: dsa: microchip: enable port queues for tc mqprio

LAN937x family of switches has 8 queues per port where the KSZ switches
has 4 queues per port. By default, only one queue per port is enabled.
The queues are configurable in 2, 4 or 8. This patch add 8 number of
queues for LAN937x and 4 for other switches.
In the tag_ksz.c file, prioirty of the packet is queried using the skb
buffer and the corresponding value is updated in the tag.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/dsa/microchip/ksz9477.c

@@ -980,6 +980,22 @@ int ksz9477_set_ageing_time(struct ksz_device *dev, unsigned int msecs)
 	return ksz_write8(dev, REG_SW_LUE_CTRL_0, value);
 }
 
+void ksz9477_port_queue_split(struct ksz_device *dev, int port)
+{
+	u8 data;
+
+	if (dev->info->num_tx_queues == 8)
+		data = PORT_EIGHT_QUEUE;
+	else if (dev->info->num_tx_queues == 4)
+		data = PORT_FOUR_QUEUE;
+	else if (dev->info->num_tx_queues == 2)
+		data = PORT_TWO_QUEUE;
+	else
+		data = PORT_SINGLE_QUEUE;
+
+	ksz_prmw8(dev, port, REG_PORT_CTRL_0, PORT_QUEUE_SPLIT_MASK, data);
+}
+
 void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 {
 	struct dsa_switch *ds = dev->ds;
@@ -991,6 +1007,8 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 		ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
 			     true);
 
+	ksz9477_port_queue_split(dev, port);
+
 	ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
 
 	/* set back pressure */

drivers/net/dsa/microchip/ksz9477.h

@@ -56,5 +56,6 @@ int ksz9477_reset_switch(struct ksz_device *dev);
 int ksz9477_dsa_init(struct ksz_device *dev);
 int ksz9477_switch_init(struct ksz_device *dev);
 void ksz9477_switch_exit(struct ksz_device *dev);
+void ksz9477_port_queue_split(struct ksz_device *dev, int port);
 
 #endif

drivers/net/dsa/microchip/ksz9477_reg.h

@@ -850,7 +850,11 @@
 #define PORT_FORCE_TX_FLOW_CTRL		BIT(4)
 #define PORT_FORCE_RX_FLOW_CTRL		BIT(3)
 #define PORT_TAIL_TAG_ENABLE		BIT(2)
-#define PORT_QUEUE_SPLIT_ENABLE		0x3
+#define PORT_QUEUE_SPLIT_MASK		GENMASK(1, 0)
+#define PORT_EIGHT_QUEUE		0x3
+#define PORT_FOUR_QUEUE			0x2
+#define PORT_TWO_QUEUE			0x1
+#define PORT_SINGLE_QUEUE		0x0
 
 #define REG_PORT_CTRL_1			0x0021
 

drivers/net/dsa/microchip/ksz_common.c

@@ -1080,6 +1080,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x07,	/* can be configured as cpu port */
 		.port_cnt = 3,		/* total port count */
 		.port_nirqs = 3,
+		.num_tx_queues = 4,
 		.ops = &ksz9477_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1106,6 +1107,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.num_statics = 8,
 		.cpu_ports = 0x10,	/* can be configured as cpu port */
 		.port_cnt = 5,		/* total cpu and user ports */
+		.num_tx_queues = 4,
 		.ops = &ksz8_dev_ops,
 		.ksz87xx_eee_link_erratum = true,
 		.mib_names = ksz9477_mib_names,
@@ -1144,6 +1146,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.num_statics = 8,
 		.cpu_ports = 0x10,	/* can be configured as cpu port */
 		.port_cnt = 5,		/* total cpu and user ports */
+		.num_tx_queues = 4,
 		.ops = &ksz8_dev_ops,
 		.ksz87xx_eee_link_erratum = true,
 		.mib_names = ksz9477_mib_names,
@@ -1168,6 +1171,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.num_statics = 8,
 		.cpu_ports = 0x10,	/* can be configured as cpu port */
 		.port_cnt = 5,		/* total cpu and user ports */
+		.num_tx_queues = 4,
 		.ops = &ksz8_dev_ops,
 		.ksz87xx_eee_link_erratum = true,
 		.mib_names = ksz9477_mib_names,
@@ -1192,6 +1196,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.num_statics = 8,
 		.cpu_ports = 0x4,	/* can be configured as cpu port */
 		.port_cnt = 3,
+		.num_tx_queues = 4,
 		.ops = &ksz8_dev_ops,
 		.mib_names = ksz88xx_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
@@ -1213,6 +1218,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x7F,	/* can be configured as cpu port */
 		.port_cnt = 7,		/* total physical port count */
 		.port_nirqs = 4,
+		.num_tx_queues = 4,
 		.ops = &ksz9477_dev_ops,
 		.phy_errata_9477 = true,
 		.mib_names = ksz9477_mib_names,
@@ -1245,6 +1251,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x3F,	/* can be configured as cpu port */
 		.port_cnt = 6,		/* total physical port count */
 		.port_nirqs = 2,
+		.num_tx_queues = 4,
 		.ops = &ksz9477_dev_ops,
 		.phy_errata_9477 = true,
 		.mib_names = ksz9477_mib_names,
@@ -1277,6 +1284,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x7F,	/* can be configured as cpu port */
 		.port_cnt = 7,		/* total physical port count */
 		.port_nirqs = 2,
+		.num_tx_queues = 4,
 		.ops = &ksz9477_dev_ops,
 		.phy_errata_9477 = true,
 		.mib_names = ksz9477_mib_names,
@@ -1307,6 +1315,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x07,	/* can be configured as cpu port */
 		.port_cnt = 3,		/* total port count */
 		.port_nirqs = 2,
+		.num_tx_queues = 4,
 		.ops = &ksz9477_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1332,6 +1341,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x07,	/* can be configured as cpu port */
 		.port_cnt = 3,		/* total port count */
 		.port_nirqs = 3,
+		.num_tx_queues = 4,
 		.ops = &ksz9477_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1357,6 +1367,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x7F,	/* can be configured as cpu port */
 		.port_cnt = 7,		/* total physical port count */
 		.port_nirqs = 3,
+		.num_tx_queues = 4,
 		.ops = &ksz9477_dev_ops,
 		.phy_errata_9477 = true,
 		.mib_names = ksz9477_mib_names,
@@ -1387,6 +1398,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x10,	/* can be configured as cpu port */
 		.port_cnt = 5,		/* total physical port count */
 		.port_nirqs = 6,
+		.num_tx_queues = 8,
 		.ops = &lan937x_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1411,6 +1423,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x30,	/* can be configured as cpu port */
 		.port_cnt = 6,		/* total physical port count */
 		.port_nirqs = 6,
+		.num_tx_queues = 8,
 		.ops = &lan937x_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1435,6 +1448,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x30,	/* can be configured as cpu port */
 		.port_cnt = 8,		/* total physical port count */
 		.port_nirqs = 6,
+		.num_tx_queues = 8,
 		.ops = &lan937x_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1463,6 +1477,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x38,	/* can be configured as cpu port */
 		.port_cnt = 5,		/* total physical port count */
 		.port_nirqs = 6,
+		.num_tx_queues = 8,
 		.ops = &lan937x_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1491,6 +1506,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x30,	/* can be configured as cpu port */
 		.port_cnt = 8,		/* total physical port count */
 		.port_nirqs = 6,
+		.num_tx_queues = 8,
 		.ops = &lan937x_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -2065,6 +2081,8 @@ static int ksz_setup(struct dsa_switch *ds)
 
 	dev->dev_ops->enable_stp_addr(dev);
 
+	ds->num_tx_queues = dev->info->num_tx_queues;
+
 	regmap_update_bits(dev->regmap[0], regs[S_MULTICAST_CTRL],
 			   MULTICAST_STORM_DISABLE, MULTICAST_STORM_DISABLE);
 

drivers/net/dsa/microchip/ksz_common.h

@@ -49,6 +49,7 @@ struct ksz_chip_data {
 	int cpu_ports;
 	int port_cnt;
 	u8 port_nirqs;
+	u8 num_tx_queues;
 	const struct ksz_dev_ops *ops;
 	bool phy_errata_9477;
 	bool ksz87xx_eee_link_erratum;

drivers/net/dsa/microchip/lan937x_main.c

@@ -15,6 +15,7 @@
 
 #include "lan937x_reg.h"
 #include "ksz_common.h"
+#include "ksz9477.h"
 #include "lan937x.h"
 
 static int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
@@ -180,6 +181,9 @@ void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 		lan937x_port_cfg(dev, port, REG_PORT_CTRL_0,
 				 PORT_TAIL_TAG_ENABLE, true);
 
+	/* Enable the Port Queue split */
+	ksz9477_port_queue_split(dev, port);
+
 	/* set back pressure for half duplex */
 	lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE,
 			 true);

net/dsa/tag_ksz.c

@@ -178,6 +178,7 @@ MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_KSZ8795, KSZ8795_NAME);
 #define KSZ9477_PTP_TAG_LEN		4
 #define KSZ9477_PTP_TAG_INDICATION	0x80
 
+#define KSZ9477_TAIL_TAG_PRIO		GENMASK(8, 7)
 #define KSZ9477_TAIL_TAG_OVERRIDE	BIT(9)
 #define KSZ9477_TAIL_TAG_LOOKUP		BIT(10)
 
@@ -269,6 +270,8 @@ static struct sk_buff *ksz_defer_xmit(struct dsa_port *dp, struct sk_buff *skb)
 static struct sk_buff *ksz9477_xmit(struct sk_buff *skb,
 				    struct net_device *dev)
 {
+	u16 queue_mapping = skb_get_queue_mapping(skb);
+	u8 prio = netdev_txq_to_tc(dev, queue_mapping);
 	struct dsa_port *dp = dsa_slave_to_port(dev);
 	__be16 *tag;
 	u8 *addr;
@@ -285,6 +288,8 @@ static struct sk_buff *ksz9477_xmit(struct sk_buff *skb,
 
 	val = BIT(dp->index);
 
+	val |= FIELD_PREP(KSZ9477_TAIL_TAG_PRIO, prio);
+
 	if (is_link_local_ether_addr(addr))
 		val |= KSZ9477_TAIL_TAG_OVERRIDE;
 
@@ -322,12 +327,15 @@ static const struct dsa_device_ops ksz9477_netdev_ops = {
 DSA_TAG_DRIVER(ksz9477_netdev_ops);
 MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_KSZ9477, KSZ9477_NAME);
 
+#define KSZ9893_TAIL_TAG_PRIO		GENMASK(4, 3)
 #define KSZ9893_TAIL_TAG_OVERRIDE	BIT(5)
 #define KSZ9893_TAIL_TAG_LOOKUP		BIT(6)
 
 static struct sk_buff *ksz9893_xmit(struct sk_buff *skb,
 				    struct net_device *dev)
 {
+	u16 queue_mapping = skb_get_queue_mapping(skb);
+	u8 prio = netdev_txq_to_tc(dev, queue_mapping);
 	struct dsa_port *dp = dsa_slave_to_port(dev);
 	u8 *addr;
 	u8 *tag;
@@ -343,6 +351,8 @@ static struct sk_buff *ksz9893_xmit(struct sk_buff *skb,
 
 	*tag = BIT(dp->index);
 
+	*tag |= FIELD_PREP(KSZ9893_TAIL_TAG_PRIO, prio);
+
 	if (is_link_local_ether_addr(addr))
 		*tag |= KSZ9893_TAIL_TAG_OVERRIDE;
 
@@ -384,11 +394,14 @@ MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_KSZ9893, KSZ9893_NAME);
 #define LAN937X_TAIL_TAG_BLOCKING_OVERRIDE	BIT(11)
 #define LAN937X_TAIL_TAG_LOOKUP			BIT(12)
 #define LAN937X_TAIL_TAG_VALID			BIT(13)
+#define LAN937X_TAIL_TAG_PRIO			GENMASK(10, 8)
 #define LAN937X_TAIL_TAG_PORT_MASK		7
 
 static struct sk_buff *lan937x_xmit(struct sk_buff *skb,
 				    struct net_device *dev)
 {
+	u16 queue_mapping = skb_get_queue_mapping(skb);
+	u8 prio = netdev_txq_to_tc(dev, queue_mapping);
 	struct dsa_port *dp = dsa_slave_to_port(dev);
 	const struct ethhdr *hdr = eth_hdr(skb);
 	__be16 *tag;
@@ -403,6 +416,8 @@ static struct sk_buff *lan937x_xmit(struct sk_buff *skb,
 
 	val = BIT(dp->index);
 
+	val |= FIELD_PREP(LAN937X_TAIL_TAG_PRIO, prio);
+
 	if (is_link_local_ether_addr(hdr->h_dest))
 		val |= LAN937X_TAIL_TAG_BLOCKING_OVERRIDE;