Merge tag 'arc-v3.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC port updates from Vineet Gupta:
 "Support for two new platforms based on ARC700:
   - Abilis TB10x SoC [Chritisian/Pierrick]
   - Simulator only System-C Model [Mischa]

  ARC specific MM improvements:
   - Avoid full TLB flush (ASID increment) on munmap (even single page)
   - VIPT Cache Flushing improvements
     + Delayed dcache flush for non-aliasing dcache (big performance boost)
     + icache flush aliasing agnostic (no need to kill all possible aliases)

  Others:
   - Avoid needless rebuild of DTB files for every kernel build
   - Remove builtin cmdline as that is already provided by DeviceTree/bootargs
   - Fixing unaligned access emulation corner case
   - checkpatch fixes [Sachin]
   - Various fixlets [Noam]
   - Minor build failures/cleanups"

* tag 'arc-v3.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (35 commits)
  ARC: [mm] Lazy D-cache flush (non aliasing VIPT)
  ARC: [mm] micro-optimize page size icache invalidate
  ARC: [mm] remove the pessimistic all-alias-invalidate icache helpers
  ARC: [mm] consolidate icache/dcache sync code
  ARC: [mm] optimise icache flush for kernel mappings
  ARC: [mm] optimise icache flush for user mappings
  ARC: [mm] optimize needless full mm TLB flush on munmap
  ARC: Add support for nSIM OSCI System C model
  ARC: [TB10x] Adapt device tree to new compatible string
  ARC: [TB10x] Add support for TB10x platform
  ARC: [TB10x] Device tree of TB100 and TB101 Development Kits
  ARC: Prepare interrupt code for external controllers
  ARC: Allow embedded arc-intc to be properly placed in DT intc hierarchy
  ARC: [cmdline] Don't overwrite u-boot provided bootargs
  ARC: [cmdline] Remove CONFIG_CMDLINE
  ARC: [plat-arcfpga] defconfig update
  ARC: unaligned access emulation broken if callee-reg dest of LD/ST
  ARC: unaligned access emulation error handling consolidation
  ARC: Debug/crash-printing Improvements
  ARC: fix typo with clock speed
  ...

arch/arc/Kconfig

@@ -16,8 +16,6 @@ config ARC
 	select GENERIC_FIND_FIRST_BIT
 	# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_SHOW
-	select GENERIC_KERNEL_EXECVE
-	select GENERIC_KERNEL_THREAD
 	select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_KGDB
@@ -61,9 +59,6 @@ config GENERIC_CALIBRATE_DELAY
 config GENERIC_HWEIGHT
 	def_bool y
 
-config BINFMT_ELF
-	def_bool y
-
 config STACKTRACE_SUPPORT
 	def_bool y
 	select STACKTRACE
@@ -82,6 +77,7 @@ menu "ARC Architecture Configuration"
 menu "ARC Platform/SoC/Board"
 
 source "arch/arc/plat-arcfpga/Kconfig"
+source "arch/arc/plat-tb10x/Kconfig"
 #New platform adds here
 
 endmenu
@@ -134,9 +130,6 @@ if SMP
 config ARC_HAS_COH_CACHES
 	def_bool n
 
-config ARC_HAS_COH_LLSC
-	def_bool n
-
 config ARC_HAS_COH_RTSC
 	def_bool n
 
@@ -304,6 +297,9 @@ config ARC_FPU_SAVE_RESTORE
 	  based on actual usage of FPU by a task. Thus our implemn does
 	  this for all tasks in system.
 
+config ARC_CANT_LLSC
+	def_bool n
+
 menuconfig ARC_CPU_REL_4_10
 	bool "Enable support for Rel 4.10 features"
 	default n
@@ -314,9 +310,7 @@ menuconfig ARC_CPU_REL_4_10
 config ARC_HAS_LLSC
 	bool "Insn: LLOCK/SCOND (efficient atomic ops)"
 	default y
-	depends on ARC_CPU_770
-	# if SMP, enable LLSC ONLY if ARC implementation has coherent atomics
-	depends on !SMP || ARC_HAS_COH_LLSC
+	depends on ARC_CPU_770 && !ARC_CANT_LLSC
 
 config ARC_HAS_SWAPE
 	bool "Insn: SWAPE (endian-swap)"
@@ -415,13 +409,6 @@ config ARC_DBG_TLB_MISS_COUNT
 	  Counts number of I and D TLB Misses and exports them via Debugfs
 	  The counters can be cleared via Debugfs as well
 
-config CMDLINE
-	string "Kernel command line to built-in"
-	default "print-fatal-signals=1"
-	help
-	  The default command line which will be appended to the optional
-	  u-boot provided command line (see below)
-
 config CMDLINE_UBOOT
 	bool "Support U-boot kernel command line passing"
 	default n
@@ -430,8 +417,8 @@ config CMDLINE_UBOOT
 	  command line from the U-boot environment to the Linux kernel then
 	  switch this option on.
 	  ARC U-boot will setup the cmdline in RAM/flash and set r2 to point
-	  to it. kernel startup code will copy the string into cmdline buffer
-	  and also append CONFIG_CMDLINE.
+	  to it. kernel startup code will append this to DeviceTree
+	  /bootargs provided cmdline args.
 
 config ARC_BUILTIN_DTB_NAME
 	string "Built in DTB"
@@ -441,6 +428,10 @@ config ARC_BUILTIN_DTB_NAME
 
 source "kernel/Kconfig.preempt"
 
+menu "Executable file formats"
+source "fs/Kconfig.binfmt"
+endmenu
+
 endmenu	 # "ARC Architecture Configuration"
 
 source "mm/Kconfig"

arch/arc/Makefile

@@ -8,6 +8,10 @@
 
 UTS_MACHINE := arc
 
+ifeq ($(CROSS_COMPILE),)
+CROSS_COMPILE := arc-elf32-
+endif
+
 KBUILD_DEFCONFIG := fpga_defconfig
 
 cflags-y	+= -mA7 -fno-common -pipe -fno-builtin -D__linux__
@@ -87,20 +91,23 @@ core-y		+= arch/arc/
 core-y		+= arch/arc/boot/dts/
 
 core-$(CONFIG_ARC_PLAT_FPGA_LEGACY)	+= arch/arc/plat-arcfpga/
+core-$(CONFIG_ARC_PLAT_TB10X)		+= arch/arc/plat-tb10x/
 
 drivers-$(CONFIG_OPROFILE)	+= arch/arc/oprofile/
 
 libs-y		+= arch/arc/lib/ $(LIBGCC)
 
+boot		:= arch/arc/boot
+
 #default target for make without any arguements.
 KBUILD_IMAGE	:= bootpImage
 
 all:	$(KBUILD_IMAGE)
-boot	:= arch/arc/boot
-
 bootpImage: vmlinux
 
-uImage: vmlinux
+boot_targets += uImage uImage.bin uImage.gz
+
+$(boot_targets): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 %.dtb %.dtb.S %.dtb.o: scripts

arch/arc/boot/Makefile

@@ -3,7 +3,6 @@ targets := vmlinux.bin vmlinux.bin.gz uImage
 # uImage build relies on mkimage being availble on your host for ARC target
 # You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage
 # and make sure it's reacable from your PATH
-MKIMAGE := $(srctree)/scripts/mkuboot.sh
 
 OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S
 
@@ -12,7 +11,12 @@ LINUX_START_TEXT = $$(readelf -h vmlinux | \
 
 UIMAGE_LOADADDR    = $(CONFIG_LINUX_LINK_BASE)
 UIMAGE_ENTRYADDR   = $(LINUX_START_TEXT)
-UIMAGE_COMPRESSION = gzip
+
+suffix-y := bin
+suffix-$(CONFIG_KERNEL_GZIP)	:= gz
+
+targets += uImage uImage.bin uImage.gz
+extra-y += vmlinux.bin vmlinux.bin.gz
 
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
@@ -20,7 +24,12 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,uimage)
+$(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,uimage,none)
+
+$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,uimage,gzip)
 
-PHONY += FORCE
+$(obj)/uImage: $(obj)/uImage.$(suffix-y)
+	@ln -sf $(notdir $<) $@
+	@echo '  Image $@ is ready'

arch/arc/boot/dts/Makefile

@@ -8,6 +8,8 @@ endif
 obj-y   += $(builtindtb-y).dtb.o
 targets += $(builtindtb-y).dtb
 
+.SECONDARY: $(obj)/$(builtindtb-y).dtb.S
+
 dtbs:  $(addprefix  $(obj)/, $(builtindtb-y).dtb)
 
-clean-files := *.dtb
+clean-files := *.dtb  *.dtb.S

arch/arc/boot/dts/abilis_tb100.dtsi

+/*
+ * Abilis Systems TB100 SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/include/ "abilis_tb10x.dtsi"
+
+/* interrupt specifiers
+ * --------------------
+ * 0: rising, 1: low, 2: high, 3: falling,
+ */
+
+/ {
+	clock-frequency		= <500000000>;	/* 500 MHZ */
+
+	soc100 {
+		bus-frequency	= <166666666>;
+
+		pll0: oscillator {
+			clock-frequency  = <1000000000>;
+		};
+		cpu_clk: clkdiv_cpu {
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+		ahb_clk: clkdiv_ahb {
+			clock-mult = <1>;
+			clock-div = <6>;
+		};
+
+		iomux: iomux@FF10601c {
+			/* Port 1 */
+			pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
+				pingrp = "mis0_pins";
+			};
+			pctl_tsin_s1: pctl-tsin-s1 {   /* Serial TS-in 1 */
+				pingrp = "mis1_pins";
+			};
+			pctl_gpio_a: pctl-gpio-a {     /* GPIO bank A */
+				pingrp = "gpioa_pins";
+			};
+			pctl_tsin_p1: pctl-tsin-p1 {   /* Parallel TS-in 1 */
+				pingrp = "mip1_pins";
+			};
+			/* Port 2 */
+			pctl_tsin_s2: pctl-tsin-s2 {   /* Serial TS-in 2 */
+				pingrp = "mis2_pins";
+			};
+			pctl_tsin_s3: pctl-tsin-s3 {   /* Serial TS-in 3 */
+				pingrp = "mis3_pins";
+			};
+			pctl_gpio_c: pctl-gpio-c {     /* GPIO bank C */
+				pingrp = "gpioc_pins";
+			};
+			pctl_tsin_p3: pctl-tsin-p3 {   /* Parallel TS-in 3 */
+				pingrp = "mip3_pins";
+			};
+			/* Port 3 */
+			pctl_tsin_s4: pctl-tsin-s4 {   /* Serial TS-in 4 */
+				pingrp = "mis4_pins";
+			};
+			pctl_tsin_s5: pctl-tsin-s5 {   /* Serial TS-in 5 */
+				pingrp = "mis5_pins";
+			};
+			pctl_gpio_e: pctl-gpio-e {     /* GPIO bank E */
+				pingrp = "gpioe_pins";
+			};
+			pctl_tsin_p5: pctl-tsin-p5 {   /* Parallel TS-in 5 */
+				pingrp = "mip5_pins";
+			};
+			/* Port 4 */
+			pctl_tsin_s6: pctl-tsin-s6 {   /* Serial TS-in 6 */
+				pingrp = "mis6_pins";
+			};
+			pctl_tsin_s7: pctl-tsin-s7 {   /* Serial TS-in 7 */
+				pingrp = "mis7_pins";
+			};
+			pctl_gpio_g: pctl-gpio-g {     /* GPIO bank G */
+				pingrp = "gpiog_pins";
+			};
+			pctl_tsin_p7: pctl-tsin-p7 {   /* Parallel TS-in 7 */
+				pingrp = "mip7_pins";
+			};
+			/* Port 5 */
+			pctl_gpio_j: pctl-gpio-j {     /* GPIO bank J */
+				pingrp = "gpioj_pins";
+			};
+			pctl_gpio_k: pctl-gpio-k {     /* GPIO bank K */
+				pingrp = "gpiok_pins";
+			};
+			pctl_ciplus: pctl-ciplus {     /* CI+ interface */
+				pingrp = "ciplus_pins";
+			};
+			pctl_mcard: pctl-mcard {       /* M-Card interface */
+				pingrp = "mcard_pins";
+			};
+			/* Port 6 */
+			pctl_tsout_p: pctl-tsout-p {   /* Parallel TS-out */
+				pingrp = "mop_pins";
+			};
+			pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
+				pingrp = "mos0_pins";
+			};
+			pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
+				pingrp = "mos1_pins";
+			};
+			pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
+				pingrp = "mos2_pins";
+			};
+			pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
+				pingrp = "mos3_pins";
+			};
+			/* Port 7 */
+			pctl_uart0: pctl-uart0 {       /* UART 0 */
+				pingrp = "uart0_pins";
+			};
+			pctl_uart1: pctl-uart1 {       /* UART 1 */
+				pingrp = "uart1_pins";
+			};
+			pctl_gpio_l: pctl-gpio-l {     /* GPIO bank L */
+				pingrp = "gpiol_pins";
+			};
+			pctl_gpio_m: pctl-gpio-m {     /* GPIO bank M */
+				pingrp = "gpiom_pins";
+			};
+			/* Port 8 */
+			pctl_spi3: pctl-spi3 {
+				pingrp = "spi3_pins";
+			};
+			/* Port 9 */
+			pctl_spi1: pctl-spi1 {
+				pingrp = "spi1_pins";
+			};
+			pctl_gpio_n: pctl-gpio-n {
+				pingrp = "gpion_pins";
+			};
+			/* Unmuxed GPIOs */
+			pctl_gpio_b: pctl-gpio-b {
+				pingrp = "gpiob_pins";
+			};
+			pctl_gpio_d: pctl-gpio-d {
+				pingrp = "gpiod_pins";
+			};
+			pctl_gpio_f: pctl-gpio-f {
+				pingrp = "gpiof_pins";
+			};
+			pctl_gpio_h: pctl-gpio-h {
+				pingrp = "gpioh_pins";
+			};
+			pctl_gpio_i: pctl-gpio-i {
+				pingrp = "gpioi_pins";
+			};
+		};
+
+		gpioa: gpio@FF140000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF140000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <0>;
+			gpio-pins = <&pctl_gpio_a>;
+		};
+		gpiob: gpio@FF141000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF141000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <3>;
+			gpio-pins = <&pctl_gpio_b>;
+		};
+		gpioc: gpio@FF142000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF142000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <5>;
+			gpio-pins = <&pctl_gpio_c>;
+		};
+		gpiod: gpio@FF143000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF143000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <8>;
+			gpio-pins = <&pctl_gpio_d>;
+		};
+		gpioe: gpio@FF144000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF144000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <10>;
+			gpio-pins = <&pctl_gpio_e>;
+		};
+		gpiof: gpio@FF145000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF145000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <13>;
+			gpio-pins = <&pctl_gpio_f>;
+		};
+		gpiog: gpio@FF146000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF146000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <15>;
+			gpio-pins = <&pctl_gpio_g>;
+		};
+		gpioh: gpio@FF147000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF147000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <18>;
+			gpio-pins = <&pctl_gpio_h>;
+		};
+		gpioi: gpio@FF148000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF148000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <20>;
+			gpio-pins = <&pctl_gpio_i>;
+		};
+		gpioj: gpio@FF149000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF149000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <32>;
+			gpio-pins = <&pctl_gpio_j>;
+		};
+		gpiok: gpio@FF14a000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF14A000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <64>;
+			gpio-pins = <&pctl_gpio_k>;
+		};
+		gpiol: gpio@FF14b000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF14B000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <86>;
+			gpio-pins = <&pctl_gpio_l>;
+		};
+		gpiom: gpio@FF14c000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF14C000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <90>;
+			gpio-pins = <&pctl_gpio_m>;
+		};
+		gpion: gpio@FF14d000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF14D000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <94>;
+			gpio-pins = <&pctl_gpio_n>;
+		};
+	};
+};

arch/arc/boot/dts/abilis_tb100_dvk.dts

+/*
+ * Abilis Systems TB100 Development Kit PCB device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/dts-v1/;
+
+/include/ "abilis_tb100.dtsi"
+
+/ {
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
+	};
+
+	aliases { };
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x08000000>;	/* 128M */
+	};
+
+	soc100 {
+		uart@FF100000 {
+			pinctrl-names = "abilis,simple-default";
+			pinctrl-0 = <&pctl_uart0>;
+		};
+		ethernet@FE100000 {
+			phy-mode = "rgmii";
+		};
+
+		i2c0: i2c@FF120000 {
+			sda-hold-time = <432>;
+		};
+		i2c1: i2c@FF121000 {
+			sda-hold-time = <432>;
+		};
+		i2c2: i2c@FF122000 {
+			sda-hold-time = <432>;
+		};
+		i2c3: i2c@FF123000 {
+			sda-hold-time = <432>;
+		};
+		i2c4: i2c@FF124000 {
+			sda-hold-time = <432>;
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			power {
+				label = "Power";
+				gpios = <&gpioi 0>;
+				linux,default-trigger = "default-on";
+			};
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpioi 1>;
+				linux,default-trigger = "heartbeat";
+			};
+			led2 {
+				label = "LED2";
+				gpios = <&gpioi 2>;
+				default-state = "off";
+			};
+			led3 {
+				label = "LED3";
+				gpios = <&gpioi 3>;
+				default-state = "off";
+			};
+			led4 {
+				label = "LED4";
+				gpios = <&gpioi 4>;
+				default-state = "off";
+			};
+			led5 {
+				label = "LED5";
+				gpios = <&gpioi 5>;
+				default-state = "off";
+			};
+			led6 {
+				label = "LED6";
+				gpios = <&gpioi 6>;
+				default-state = "off";
+			};
+			led7 {
+				label = "LED7";
+				gpios = <&gpioi 7>;
+				default-state = "off";
+			};
+			led8 {
+				label = "LED8";
+				gpios = <&gpioi 8>;
+				default-state = "off";
+			};
+			led9 {
+				label = "LED9";
+				gpios = <&gpioi 9>;
+				default-state = "off";
+			};
+			led10 {
+				label = "LED10";
+				gpios = <&gpioi 10>;
+				default-state = "off";
+			};
+			led11 {
+				label = "LED11";
+				gpios = <&gpioi 11>;
+				default-state = "off";
+			};
+		};
+	};
+};

arch/arc/boot/dts/abilis_tb101.dtsi

+/*
+ * Abilis Systems TB101 SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/include/ "abilis_tb10x.dtsi"
+
+/* interrupt specifiers
+ * --------------------
+ * 0: rising, 1: low, 2: high, 3: falling,
+ */
+
+/ {
+	clock-frequency		= <500000000>;	/* 500 MHZ */
+
+	soc100 {
+		bus-frequency	= <166666666>;
+
+		pll0: oscillator {
+			clock-frequency  = <1000000000>;
+		};
+		cpu_clk: clkdiv_cpu {
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+		ahb_clk: clkdiv_ahb {
+			clock-mult = <1>;
+			clock-div = <6>;
+		};
+
+		iomux: iomux@FF10601c {
+			/* Port 1 */
+			pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
+				pingrp = "mis0_pins";
+			};
+			pctl_tsin_s1: pctl-tsin-s1 {   /* Serial TS-in 1 */
+				pingrp = "mis1_pins";
+			};
+			pctl_gpio_a: pctl-gpio-a {     /* GPIO bank A */
+				pingrp = "gpioa_pins";
+			};
+			pctl_tsin_p1: pctl-tsin-p1 {   /* Parallel TS-in 1 */
+				pingrp = "mip1_pins";
+			};
+			/* Port 2 */
+			pctl_tsin_s2: pctl-tsin-s2 {   /* Serial TS-in 2 */
+				pingrp = "mis2_pins";
+			};
+			pctl_tsin_s3: pctl-tsin-s3 {   /* Serial TS-in 3 */
+				pingrp = "mis3_pins";
+			};
+			pctl_gpio_c: pctl-gpio-c {     /* GPIO bank C */
+				pingrp = "gpioc_pins";
+			};
+			pctl_tsin_p3: pctl-tsin-p3 {   /* Parallel TS-in 3 */
+				pingrp = "mip3_pins";
+			};
+			/* Port 3 */
+			pctl_tsin_s4: pctl-tsin-s4 {   /* Serial TS-in 4 */
+				pingrp = "mis4_pins";
+			};
+			pctl_tsin_s5: pctl-tsin-s5 {   /* Serial TS-in 5 */
+				pingrp = "mis5_pins";
+			};
+			pctl_gpio_e: pctl-gpio-e {     /* GPIO bank E */
+				pingrp = "gpioe_pins";
+			};
+			pctl_tsin_p5: pctl-tsin-p5 {   /* Parallel TS-in 5 */
+				pingrp = "mip5_pins";
+			};
+			/* Port 4 */
+			pctl_tsin_s6: pctl-tsin-s6 {   /* Serial TS-in 6 */
+				pingrp = "mis6_pins";
+			};
+			pctl_tsin_s7: pctl-tsin-s7 {   /* Serial TS-in 7 */
+				pingrp = "mis7_pins";
+			};
+			pctl_gpio_g: pctl-gpio-g {     /* GPIO bank G */
+				pingrp = "gpiog_pins";
+			};
+			pctl_tsin_p7: pctl-tsin-p7 {   /* Parallel TS-in 7 */
+				pingrp = "mip7_pins";
+			};
+			/* Port 5 */
+			pctl_gpio_j: pctl-gpio-j {     /* GPIO bank J */
+				pingrp = "gpioj_pins";
+			};
+			pctl_gpio_k: pctl-gpio-k {     /* GPIO bank K */
+				pingrp = "gpiok_pins";
+			};
+			pctl_ciplus: pctl-ciplus {     /* CI+ interface */
+				pingrp = "ciplus_pins";
+			};
+			pctl_mcard: pctl-mcard {       /* M-Card interface */
+				pingrp = "mcard_pins";
+			};
+			pctl_stc0: pctl-stc0 {         /* Smart card I/F 0 */
+				pingrp = "stc0_pins";
+			};
+			pctl_stc1: pctl-stc1 {         /* Smart card I/F 1 */
+				pingrp = "stc1_pins";
+			};
+			/* Port 6 */
+			pctl_tsout_p: pctl-tsout-p {   /* Parallel TS-out */
+				pingrp = "mop_pins";
+			};
+			pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
+				pingrp = "mos0_pins";
+			};
+			pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
+				pingrp = "mos1_pins";
+			};
+			pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
+				pingrp = "mos2_pins";
+			};
+			pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
+				pingrp = "mos3_pins";
+			};
+			/* Port 7 */
+			pctl_uart0: pctl-uart0 {       /* UART 0 */
+				pingrp = "uart0_pins";
+			};
+			pctl_uart1: pctl-uart1 {       /* UART 1 */
+				pingrp = "uart1_pins";
+			};
+			pctl_gpio_l: pctl-gpio-l {     /* GPIO bank L */
+				pingrp = "gpiol_pins";
+			};
+			pctl_gpio_m: pctl-gpio-m {     /* GPIO bank M */
+				pingrp = "gpiom_pins";
+			};
+			/* Port 8 */
+			pctl_spi3: pctl-spi3 {
+				pingrp = "spi3_pins";
+			};
+			pctl_jtag: pctl-jtag {
+				pingrp = "jtag_pins";
+			};
+			/* Port 9 */
+			pctl_spi1: pctl-spi1 {
+				pingrp = "spi1_pins";
+			};
+			pctl_gpio_n: pctl-gpio-n {
+				pingrp = "gpion_pins";
+			};
+			/* Unmuxed GPIOs */
+			pctl_gpio_b: pctl-gpio-b {
+				pingrp = "gpiob_pins";
+			};
+			pctl_gpio_d: pctl-gpio-d {
+				pingrp = "gpiod_pins";
+			};
+			pctl_gpio_f: pctl-gpio-f {
+				pingrp = "gpiof_pins";
+			};
+			pctl_gpio_h: pctl-gpio-h {
+				pingrp = "gpioh_pins";
+			};
+			pctl_gpio_i: pctl-gpio-i {
+				pingrp = "gpioi_pins";
+			};
+		};
+
+		gpioa: gpio@FF140000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF140000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <0>;
+			gpio-pins = <&pctl_gpio_a>;
+		};
+		gpiob: gpio@FF141000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF141000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <3>;
+			gpio-pins = <&pctl_gpio_b>;
+		};
+		gpioc: gpio@FF142000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF142000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <5>;
+			gpio-pins = <&pctl_gpio_c>;
+		};
+		gpiod: gpio@FF143000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF143000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <8>;
+			gpio-pins = <&pctl_gpio_d>;
+		};
+		gpioe: gpio@FF144000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF144000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <10>;
+			gpio-pins = <&pctl_gpio_e>;
+		};
+		gpiof: gpio@FF145000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF145000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <13>;
+			gpio-pins = <&pctl_gpio_f>;
+		};
+		gpiog: gpio@FF146000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF146000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <15>;
+			gpio-pins = <&pctl_gpio_g>;
+		};
+		gpioh: gpio@FF147000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF147000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <18>;
+			gpio-pins = <&pctl_gpio_h>;
+		};
+		gpioi: gpio@FF148000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF148000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <20>;
+			gpio-pins = <&pctl_gpio_i>;
+		};
+		gpioj: gpio@FF149000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF149000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <32>;
+			gpio-pins = <&pctl_gpio_j>;
+		};
+		gpiok: gpio@FF14a000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF14A000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <64>;
+			gpio-pins = <&pctl_gpio_k>;
+		};
+		gpiol: gpio@FF14b000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF14B000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <86>;
+			gpio-pins = <&pctl_gpio_l>;
+		};
+		gpiom: gpio@FF14c000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF14C000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <90>;
+			gpio-pins = <&pctl_gpio_m>;
+		};
+		gpion: gpio@FF14d000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 1>;
+			reg = <0xFF14D000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-base  = <94>;
+			gpio-pins = <&pctl_gpio_n>;
+		};
+	};
+};

arch/arc/boot/dts/abilis_tb101_dvk.dts

+/*
+ * Abilis Systems TB101 Development Kit PCB device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/dts-v1/;
+
+/include/ "abilis_tb101.dtsi"
+
+/ {
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
+	};
+
+	aliases { };
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x08000000>;	/* 128M */
+	};
+
+	soc100 {
+		uart@FF100000 {
+			pinctrl-names = "abilis,simple-default";
+			pinctrl-0 = <&pctl_uart0>;
+		};
+		ethernet@FE100000 {
+			phy-mode = "rgmii";
+		};
+
+		i2c0: i2c@FF120000 {
+			sda-hold-time = <432>;
+		};
+		i2c1: i2c@FF121000 {
+			sda-hold-time = <432>;
+		};
+		i2c2: i2c@FF122000 {
+			sda-hold-time = <432>;
+		};
+		i2c3: i2c@FF123000 {
+			sda-hold-time = <432>;
+		};
+		i2c4: i2c@FF124000 {
+			sda-hold-time = <432>;
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			power {
+				label = "Power";
+				gpios = <&gpioi 0>;
+				linux,default-trigger = "default-on";
+			};
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpioi 1>;
+				linux,default-trigger = "heartbeat";
+			};
+			led2 {
+				label = "LED2";
+				gpios = <&gpioi 2>;
+				default-state = "off";
+			};
+			led3 {
+				label = "LED3";
+				gpios = <&gpioi 3>;
+				default-state = "off";
+			};
+			led4 {
+				label = "LED4";
+				gpios = <&gpioi 4>;
+				default-state = "off";
+			};
+			led5 {
+				label = "LED5";
+				gpios = <&gpioi 5>;
+				default-state = "off";
+			};
+			led6 {
+				label = "LED6";
+				gpios = <&gpioi 6>;
+				default-state = "off";
+			};
+			led7 {
+				label = "LED7";
+				gpios = <&gpioi 7>;
+				default-state = "off";
+			};
+			led8 {
+				label = "LED8";
+				gpios = <&gpioi 8>;
+				default-state = "off";
+			};
+			led9 {
+				label = "LED9";
+				gpios = <&gpioi 9>;
+				default-state = "off";
+			};
+			led10 {
+				label = "LED10";
+				gpios = <&gpioi 10>;
+				default-state = "off";
+			};
+			led11 {
+				label = "LED11";
+				gpios = <&gpioi 11>;
+				default-state = "off";
+			};
+		};
+	};
+};

arch/arc/boot/dts/abilis_tb10x.dtsi

+/*
+ * Abilis Systems TB10X SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/* interrupt specifiers
+ * --------------------
+ * 0: rising, 1: low, 2: high, 3: falling,
+ */
+
+/ {
+	compatible		= "abilis,arc-tb10x";
+	#address-cells		= <1>;
+	#size-cells		= <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "snps,arc770d";
+			reg = <0>;
+		};
+	};
+
+	soc100 {
+		#address-cells	= <1>;
+		#size-cells	= <1>;
+		device_type	= "soc";
+		ranges		= <0xfe000000 0xfe000000 0x02000000
+				0x000F0000 0x000F0000 0x00010000>;
+		compatible	= "abilis,tb10x", "simple-bus";
+
+		pll0: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "pll0";
+		};
+		cpu_clk: clkdiv_cpu {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&pll0>;
+			clock-output-names = "cpu_clk";
+		};
+		ahb_clk: clkdiv_ahb {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&pll0>;
+			clock-output-names = "ahb_clk";
+		};
+
+		iomux: iomux@FF10601c {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "abilis,tb10x-iomux";
+			reg = <0xFF10601c 0x4>;
+		};
+
+		intc: interrupt-controller {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+		tb10x_ictl: pic@fe002000 {
+			compatible = "abilis,tb10x_ictl";
+			reg = <0xFE002000 0x20>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
+					20 21 22 23 24 25 26 27 28 29 30 31>;
+		};
+
+		uart@FF100000 {
+			compatible = "snps,dw-apb-uart",
+					"abilis,simple-pinctrl";
+			reg = <0xFF100000 0x100>;
+			clock-frequency = <166666666>;
+			interrupts = <25 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupt-parent = <&tb10x_ictl>;
+		};
+		ethernet@FE100000 {
+			compatible = "snps,dwmac-3.70a","snps,dwmac";
+			reg = <0xFE100000 0x1058>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <6 1>;
+			interrupt-names = "macirq";
+			clocks = <&ahb_clk>;
+			clock-names = "stmmaceth";
+		};
+		dma@FE000000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xFE000000 0x400>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <14 1>;
+			dma-channels = <6>;
+			dma-requests = <0>;
+			dma-masters = <1>;
+			#dma-cells = <3>;
+			chan_allocation_order = <0>;
+			chan_priority = <1>;
+			block_size = <0x7ff>;
+			data_width = <2 0 0 0>;
+			clocks = <&ahb_clk>;
+			clock-names = "hclk";
+		};
+
+		i2c0: i2c@FF120000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xFF120000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 1>;
+			clocks = <&ahb_clk>;
+		};
+		i2c1: i2c@FF121000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xFF121000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 1>;
+			clocks = <&ahb_clk>;
+		};
+		i2c2: i2c@FF122000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xFF122000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 1>;
+			clocks = <&ahb_clk>;
+		};
+		i2c3: i2c@FF123000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xFF123000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 1>;
+			clocks = <&ahb_clk>;
+		};
+		i2c4: i2c@FF124000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xFF124000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 1>;
+			clocks = <&ahb_clk>;
+		};
+
+		spi0: spi@0xFE010000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "abilis,tb100-spi";
+			num-cs = <1>;
+			reg = <0xFE010000 0x20>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <26 1>;
+			clocks = <&ahb_clk>;
+		};
+		spi1: spi@0xFE011000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "abilis,tb100-spi",
+					"abilis,simple-pinctrl";
+			num-cs = <2>;
+			reg = <0xFE011000 0x20>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <10 1>;
+			clocks = <&ahb_clk>;
+		};
+
+		tb10x_tsm: tb10x-tsm@ff316000 {
+			compatible = "abilis,tb100-tsm";
+			reg = <0xff316000 0x400>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <17 1>;
+			output-clkdiv = <4>;
+			global-packet-delay = <0x21>;
+			port-packet-delay = <0>;
+		};
+		tb10x_stream_proc: tb10x-stream-proc {
+			compatible = "abilis,tb100-streamproc";
+			reg =   <0xfff00000 0x200>,
+				<0x000f0000 0x10000>,
+				<0xfff00200 0x105>,
+				<0xff10600c 0x1>,
+				<0xfe001018 0x1>;
+			reg-names =     "mbox",
+					"sp_iccm",
+					"mbox_irq",
+					"cpuctrl",
+					"a6it_int_force";
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <20 1>, <19 1>;
+			interrupt-names = "cmd_irq", "event_irq";
+		};
+		tb10x_mdsc0: tb10x-mdscr@FF300000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xFF300000 0x7000>;
+			tb100-mdscr-manage-tsin;
+		};
+		tb10x_mscr0: tb10x-mdscr@FF307000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xFF307000 0x7000>;
+		};
+		tb10x_scr0: tb10x-mdscr@ff30e000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xFF30e000 0x4000>;
+			tb100-mdscr-manage-tsin;
+		};
+		tb10x_scr1: tb10x-mdscr@ff312000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xFF312000 0x4000>;
+			tb100-mdscr-manage-tsin;
+		};
+		tb10x_wfb: tb10x-wfb@ff319000 {
+			compatible = "abilis,tb100-wfb";
+			reg = <0xff319000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <16 1>;
+		};
+	};
+};

arch/arc/boot/dts/nsimosci.dts

+/*
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "snps,nsimosci";
+	clock-frequency = <80000000>;	/* 80 MHZ */
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	chosen {
+		bootargs = "console=tty0 consoleblank=0";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256M */
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		intc: interrupt-controller {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@c0000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xc0000000 0x2000>;
+			interrupts = <11>;
+			#clock-frequency = <80000000>;
+			clock-frequency = <3686400>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "okay";
+		};
+
+		pgu0: pgu@c9000000 {
+			compatible = "snps,arcpgufb";
+			reg = <0xc9000000 0x400>;
+		};
+
+		ps2: ps2@c9001000 {
+			compatible = "snps,arc_ps2";
+			reg = <0xc9000400 0x14>;
+			interrupts = <13>;
+			interrupt-names = "arc_ps2_irq";
+		};
+
+		eth0: ethernet@c0003000 {
+			compatible = "snps,oscilan";
+			reg = <0xc0003000 0x44>;
+			interrupts = <7>, <8>;
+			interrupt-names = "rx", "tx";
+		};
+	};
+};

arch/arc/configs/fpga_defconfig

@@ -9,7 +9,7 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../arc_initramfs"
+CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
 # CONFIG_SLUB_DEBUG is not set
@@ -24,6 +24,7 @@ CONFIG_ARC_PLAT_FPGA_LEGACY=y
 CONFIG_ARC_BOARD_ML509=y
 # CONFIG_ARC_HAS_RTSC is not set
 CONFIG_ARC_BUILTIN_DTB_NAME="angel4"
+CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 # CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NET=y

arch/arc/configs/nsimosci_defconfig

+CONFIG_CROSS_COMPILE="arc-elf32-"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_DEFAULT_HOSTNAME="ARCLinux"
+# CONFIG_SWAP is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="../arc_initramfs"
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARC_PLAT_FPGA_LEGACY=y
+CONFIG_ARC_BOARD_ML509=y
+# CONFIG_ARC_IDE is not set
+# CONFIG_ARCTANGENT_EMAC is not set
+# CONFIG_ARC_HAS_RTSC is not set
+CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci"
+# CONFIG_COMPACTION is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_ARC_PS2=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_ARC=y
+CONFIG_SERIAL_ARC_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_XZ_DEC=y

arch/arc/configs/tb10x_defconfig

+CONFIG_CROSS_COMPILE="arc-elf32-"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_DEFAULT_HOSTNAME="tb10x"
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="../tb10x-rootfs.cpio"
+CONFIG_INITRAMFS_ROOT_UID=2100
+CONFIG_INITRAMFS_ROOT_GID=501
+# CONFIG_RD_GZIP is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLOCK is not set
+CONFIG_ARC_PLAT_TB10X=y
+CONFIG_ARC_CACHE_LINE_SHIFT=5
+# CONFIG_ARC_HAS_RTSC is not set
+CONFIG_ARC_STACK_NONEXEC=y
+CONFIG_HZ=250
+CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk"
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_COMPACTION is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_DEBUG_FS=y
+CONFIG_STMMAC_DA=y
+CONFIG_STMMAC_CHAINED=y
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_DW=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_DMADEVICES=y
+CONFIG_DW_DMAC=y
+CONFIG_NET_DMA=y
+CONFIG_ASYNC_TX_DMA=y
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_HEADERS_CHECK=y
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

arch/arc/include/asm/cacheflush.h

@@ -20,12 +20,20 @@
 
 #include <linux/mm.h>
 
+/*
+ * Semantically we need this because icache doesn't snoop dcache/dma.
+ * However ARC Cache flush requires paddr as well as vaddr, latter not available
+ * in the flush_icache_page() API. So we no-op it but do the equivalent work
+ * in update_mmu_cache()
+ */
+#define flush_icache_page(vma, page)
+
 void flush_cache_all(void);
 
 void flush_icache_range(unsigned long start, unsigned long end);
-void flush_icache_page(struct vm_area_struct *vma, struct page *page);
-void flush_icache_range_vaddr(unsigned long paddr, unsigned long u_vaddr,
-				     int len);
+void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len);
+void __inv_icache_page(unsigned long paddr, unsigned long vaddr);
+void __flush_dcache_page(unsigned long paddr);
 
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 
@@ -58,7 +66,7 @@ void dma_cache_wback(unsigned long start, unsigned long sz);
 do {									\
 	memcpy(dst, src, len);						\
 	if (vma->vm_flags & VM_EXEC)					\
-		flush_icache_range_vaddr((unsigned long)(dst), vaddr, len);\
+		__sync_icache_dcache((unsigned long)(dst), vaddr, len);	\
 } while (0)
 
 #define copy_from_user_page(vma, page, vaddr, dst, src, len)		\

arch/arc/include/asm/irq.h

@@ -9,7 +9,8 @@
 #ifndef __ASM_ARC_IRQ_H
 #define __ASM_ARC_IRQ_H
 
-#define NR_IRQS		32
+#define NR_CPU_IRQS	32  /* number of interrupt lines of ARC770 CPU */
+#define NR_IRQS		128 /* allow some CPU external IRQ handling */
 
 /* Platform Independent IRQs */
 #define TIMER0_IRQ      3

arch/arc/include/asm/serial.h

@@ -22,4 +22,14 @@
 
 #define BASE_BAUD	(arc_get_core_freq() / 16)
 
+/*
+ * This is definitely going to break early 8250 consoles on multi-platform
+ * images but hey, it won't add any code complexity for a debug feature of
+ * one broken driver.
+ */
+#ifdef CONFIG_ARC_PLAT_TB10X
+#undef BASE_BAUD
+#define BASE_BAUD	(arc_get_core_freq() / 16 / 3)
+#endif
+
 #endif /* _ASM_ARC_SERIAL_H */

arch/arc/include/asm/tlb.h

@@ -21,20 +21,28 @@
 
 #ifndef __ASSEMBLY__
 
-#define tlb_flush(tlb) local_flush_tlb_mm((tlb)->mm)
+#define tlb_flush(tlb)				\
+do {						\
+	if (tlb->fullmm)			\
+		flush_tlb_mm((tlb)->mm);	\
+} while (0)
 
 /*
  * This pair is called at time of munmap/exit to flush cache and TLB entries
  * for mappings being torn down.
  * 1) cache-flush part -implemented via tlb_start_vma( ) can be NOP (for now)
  *    as we don't support aliasing configs in our VIPT D$.
- * 2) tlb-flush part - implemted via tlb_end_vma( ) can be NOP as well-
- *    albiet for difft reasons - its better handled by moving to new ASID
+ * 2) tlb-flush part - implemted via tlb_end_vma( ) flushes the TLB range
  *
  * Note, read http://lkml.org/lkml/2004/1/15/6
  */
 #define tlb_start_vma(tlb, vma)
-#define tlb_end_vma(tlb, vma)
+
+#define tlb_end_vma(tlb, vma)						\
+do {									\
+	if (!tlb->fullmm)						\
+		flush_tlb_range(vma, vma->vm_start, vma->vm_end);	\
+} while (0)
 
 #define __tlb_remove_tlb_entry(tlb, ptep, address)
 

arch/arc/kernel/asm-offsets.c

@@ -11,9 +11,9 @@
 #include <linux/interrupt.h>
 #include <linux/thread_info.h>
 #include <linux/kbuild.h>
+#include <linux/ptrace.h>
 #include <asm/hardirq.h>
 #include <asm/page.h>
-#include <asm/ptrace.h>
 
 int main(void)
 {

arch/arc/kernel/clk.c

@@ -8,7 +8,7 @@
 
 #include <asm/clk.h>
 
-unsigned long core_freq = 800000000;
+unsigned long core_freq = 80000000;
 
 /*
  * As of now we default to device-tree provided clock

arch/arc/kernel/disasm.c

@@ -12,8 +12,8 @@
 #include <linux/types.h>
 #include <linux/kprobes.h>
 #include <linux/slab.h>
+#include <linux/uaccess.h>
 #include <asm/disasm.h>
-#include <asm/uaccess.h>
 
 #if defined(CONFIG_KGDB) || defined(CONFIG_ARC_MISALIGN_ACCESS) || \
 	defined(CONFIG_KPROBES)

arch/arc/kernel/entry.S

@@ -393,12 +393,14 @@ ARC_ENTRY EV_TLBProtV
 #ifdef  CONFIG_ARC_MISALIGN_ACCESS
 	SAVE_CALLEE_SAVED_USER
 	mov r3, sp              ; callee_regs
-#endif
 
 	bl  do_misaligned_access
 
-#ifdef  CONFIG_ARC_MISALIGN_ACCESS
-	DISCARD_CALLEE_SAVED_USER
+	; TBD: optimize - do this only if a callee reg was involved
+	; either a dst of emulated LD/ST or src with address-writeback
+	RESTORE_CALLEE_SAVED_USER
+#else
+	bl  do_misaligned_error
 #endif
 
 	b   ret_from_exception

arch/arc/kernel/irq.c

@@ -11,6 +11,8 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip.h>
+#include "../../drivers/irqchip/irqchip.h"
 #include <asm/sections.h>
 #include <asm/irq.h>
 #include <asm/mach_desc.h>
@@ -26,7 +28,7 @@
  * -Disable all IRQs (on CPU side)
  * -Optionally, setup the High priority Interrupts as Level 2 IRQs
  */
-void __init arc_init_IRQ(void)
+void __cpuinit arc_init_IRQ(void)
 {
 	int level_mask = 0;
 
@@ -97,15 +99,13 @@ static const struct irq_domain_ops arc_intc_domain_ops = {
 
 static struct irq_domain *root_domain;
 
-void __init init_onchip_IRQ(void)
+static int __init
+init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 {
-	struct device_node *intc = NULL;
+	if (parent)
+		panic("DeviceTree incore intc not a root irq controller\n");
 
-	intc = of_find_compatible_node(NULL, NULL, "snps,arc700-intc");
-	if(!intc)
-		panic("DeviceTree Missing incore intc\n");
-
-	root_domain = irq_domain_add_legacy(intc, NR_IRQS, 0, 0,
+	root_domain = irq_domain_add_legacy(intc, NR_CPU_IRQS, 0, 0,
 					    &arc_intc_domain_ops, NULL);
 
 	if (!root_domain)
@@ -113,8 +113,12 @@ void __init init_onchip_IRQ(void)
 
 	/* with this we don't need to export root_domain */
 	irq_set_default_host(root_domain);
+
+	return 0;
 }
 
+IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ);
+
 /*
  * Late Interrupt system init called from start_kernel for Boot CPU only
  *
@@ -123,12 +127,13 @@ void __init init_onchip_IRQ(void)
  */
 void __init init_IRQ(void)
 {
-	init_onchip_IRQ();
-
 	/* Any external intc can be setup here */
 	if (machine_desc->init_irq)
 		machine_desc->init_irq();
 
+	/* process the entire interrupt tree in one go */
+	irqchip_init();
+
 #ifdef CONFIG_SMP
 	/* Master CPU can initialize it's side of IPI */
 	if (machine_desc->init_smp)

arch/arc/kernel/kprobes.c

@@ -10,7 +10,6 @@
 #include <linux/kprobes.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/kprobes.h>
 #include <linux/kdebug.h>
 #include <linux/sched.h>
 #include <linux/uaccess.h>

arch/arc/kernel/setup.c

@@ -14,14 +14,13 @@
 #include <linux/module.h>
 #include <linux/cpu.h>
 #include <linux/of_fdt.h>
+#include <linux/cache.h>
 #include <asm/sections.h>
 #include <asm/arcregs.h>
 #include <asm/tlb.h>
-#include <asm/cache.h>
 #include <asm/setup.h>
 #include <asm/page.h>
 #include <asm/irq.h>
-#include <asm/arcregs.h>
 #include <asm/prom.h>
 #include <asm/unwind.h>
 #include <asm/clk.h>
@@ -32,14 +31,14 @@
 int running_on_hw = 1;	/* vs. on ISS */
 
 char __initdata command_line[COMMAND_LINE_SIZE];
-struct machine_desc *machine_desc __initdata;
+struct machine_desc *machine_desc __cpuinitdata;
 
 struct task_struct *_current_task[NR_CPUS];	/* For stack switching */
 
 struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
 
 
-void __init read_arc_build_cfg_regs(void)
+void __cpuinit read_arc_build_cfg_regs(void)
 {
 	struct bcr_perip uncached_space;
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
@@ -238,7 +237,7 @@ char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
 	return buf;
 }
 
-void __init arc_chk_ccms(void)
+void __cpuinit arc_chk_ccms(void)
 {
 #if defined(CONFIG_ARC_HAS_DCCM) || defined(CONFIG_ARC_HAS_ICCM)
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
@@ -273,7 +272,7 @@ void __init arc_chk_ccms(void)
  * hardware has dedicated regs which need to be saved/restored on ctx-sw
  * (Single Precision uses core regs), thus kernel is kind of oblivious to it
  */
-void __init arc_chk_fpu(void)
+void __cpuinit arc_chk_fpu(void)
 {
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
 
@@ -294,7 +293,7 @@ void __init arc_chk_fpu(void)
  *    such as only for boot CPU etc
  */
 
-void __init setup_processor(void)
+void __cpuinit setup_processor(void)
 {
 	char str[512];
 	int cpu_id = smp_processor_id();
@@ -319,23 +318,20 @@ void __init setup_processor(void)
 
 void __init setup_arch(char **cmdline_p)
 {
+	/* This also populates @boot_command_line from /bootargs */
+	machine_desc = setup_machine_fdt(__dtb_start);
+	if (!machine_desc)
+		panic("Embedded DT invalid\n");
+
+	/* Append any u-boot provided cmdline */
 #ifdef CONFIG_CMDLINE_UBOOT
-	/* Make sure that a whitespace is inserted before */
-	strlcat(command_line, " ", sizeof(command_line));
+	/* Add a whitespace seperator between the 2 cmdlines */
+	strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
+	strlcat(boot_command_line, command_line, COMMAND_LINE_SIZE);
 #endif
-	/*
-	 * Append .config cmdline to base command line, which might already
-	 * contain u-boot "bootargs" (handled by head.S, if so configured)
-	 */
-	strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line));
 
 	/* Save unparsed command line copy for /proc/cmdline */
-	strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
-	*cmdline_p = command_line;
-
-	machine_desc = setup_machine_fdt(__dtb_start);
-	if (!machine_desc)
-		panic("Embedded DT invalid\n");
+	*cmdline_p = boot_command_line;
 
 	/* To force early parsing of things like mem=xxx */
 	parse_early_param();

arch/arc/kernel/time.c

@@ -33,7 +33,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/interrupt.h>
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/timex.h>

arch/arc/kernel/traps.c

@@ -16,11 +16,12 @@
 #include <linux/sched.h>
 #include <linux/kdebug.h>
 #include <linux/uaccess.h>
-#include <asm/ptrace.h>
+#include <linux/ptrace.h>
+#include <linux/kprobes.h>
+#include <linux/kgdb.h>
 #include <asm/setup.h>
-#include <asm/kprobes.h>
 #include <asm/unaligned.h>
-#include <asm/kgdb.h>
+#include <asm/kprobes.h>
 
 void __init trap_init(void)
 {
@@ -83,6 +84,7 @@ DO_ERROR_INFO(SIGILL, "Invalid Extn Insn", do_extension_fault, ILL_ILLOPC)
 DO_ERROR_INFO(SIGILL, "Illegal Insn (or Seq)", insterror_is_error, ILL_ILLOPC)
 DO_ERROR_INFO(SIGBUS, "Invalid Mem Access", do_memory_error, BUS_ADRERR)
 DO_ERROR_INFO(SIGTRAP, "Breakpoint Set", trap_is_brkpt, TRAP_BRKPT)
+DO_ERROR_INFO(SIGBUS, "Misaligned Access", do_misaligned_error, BUS_ADRALN)
 
 #ifdef CONFIG_ARC_MISALIGN_ACCESS
 /*
@@ -91,21 +93,11 @@ DO_ERROR_INFO(SIGTRAP, "Breakpoint Set", trap_is_brkpt, TRAP_BRKPT)
 int do_misaligned_access(unsigned long cause, unsigned long address,
 			 struct pt_regs *regs, struct callee_regs *cregs)
 {
-	if (misaligned_fixup(address, regs, cause, cregs) != 0) {
-		siginfo_t info;
-
-		info.si_signo = SIGBUS;
-		info.si_errno = 0;
-		info.si_code = BUS_ADRALN;
-		info.si_addr = (void __user *)address;
-		return handle_exception(cause, "Misaligned Access", regs,
-					  &info);
-	}
+	if (misaligned_fixup(address, regs, cause, cregs) != 0)
+		return do_misaligned_error(cause, address, regs);
+
 	return 0;
 }
-
-#else
-DO_ERROR_INFO(SIGSEGV, "Misaligned Access", do_misaligned_access, SEGV_ACCERR)
 #endif
 
 /*

arch/arc/kernel/troubleshoot.c

@@ -26,7 +26,6 @@ static noinline void print_reg_file(long *reg_rev, int start_num)
 	char buf[512];
 	int n = 0, len = sizeof(buf);
 
-	/* weird loop because pt_regs regs rev r12..r0, r25..r13 */
 	for (i = start_num; i < start_num + 13; i++) {
 		n += scnprintf(buf + n, len - n, "r%02u: 0x%08lx\t",
 			       i, (unsigned long)*reg_rev);
@@ -34,13 +33,18 @@ static noinline void print_reg_file(long *reg_rev, int start_num)
 		if (((i + 1) % 3) == 0)
 			n += scnprintf(buf + n, len - n, "\n");
 
+		/* because pt_regs has regs reversed: r12..r0, r25..r13 */
 		reg_rev--;
 	}
 
 	if (start_num != 0)
 		n += scnprintf(buf + n, len - n, "\n\n");
 
+	/* To continue printing callee regs on same line as scratch regs */
+	if (start_num == 0)
 		pr_info("%s", buf);
+	else
+		pr_cont("%s\n", buf);
 }
 
 static void show_callee_regs(struct callee_regs *cregs)
@@ -83,6 +87,10 @@ static void show_faulting_vma(unsigned long address, char *buf)
 	dev_t dev = 0;
 	char *nm = buf;
 
+	/* can't use print_vma_addr() yet as it doesn't check for
+	 * non-inclusive vma
+	 */
+
 	vma = find_vma(current->active_mm, address);
 
 	/* check against the find_vma( ) behaviour which returns the next VMA
@@ -98,10 +106,13 @@ static void show_faulting_vma(unsigned long address, char *buf)
 			ino = inode->i_ino;
 		}
 		pr_info("    @off 0x%lx in [%s]\n"
-			"    VMA: 0x%08lx to 0x%08lx\n\n",
-		       address - vma->vm_start, nm, vma->vm_start, vma->vm_end);
-	} else
+			"    VMA: 0x%08lx to 0x%08lx\n",
+			vma->vm_start < TASK_UNMAPPED_BASE ?
+				address : address - vma->vm_start,
+			nm, vma->vm_start, vma->vm_end);
+	} else {
 		pr_info("    @No matching VMA found\n");
+	}
 }
 
 static void show_ecr_verbose(struct pt_regs *regs)
@@ -110,7 +121,7 @@ static void show_ecr_verbose(struct pt_regs *regs)
 	unsigned long address;
 
 	cause_reg = current->thread.cause_code;
-	pr_info("\n[ECR]: 0x%08x => ", cause_reg);
+	pr_info("\n[ECR   ]: 0x%08x => ", cause_reg);
 
 	/* For Data fault, this is data address not instruction addr */
 	address = current->thread.fault_address;
@@ -120,7 +131,7 @@ static void show_ecr_verbose(struct pt_regs *regs)
 
 	/* For DTLB Miss or ProtV, display the memory involved too */
 	if (vec == ECR_V_DTLB_MISS) {
-		pr_cont("Invalid (%s) @ 0x%08lx by insn @ 0x%08lx\n",
+		pr_cont("Invalid %s 0x%08lx by insn @ 0x%08lx\n",
 		       (cause_code == 0x01) ? "Read From" :
 		       ((cause_code == 0x02) ? "Write to" : "EX"),
 		       address, regs->ret);
@@ -168,20 +179,23 @@ void show_regs(struct pt_regs *regs)
 	if (current->thread.cause_code)
 		show_ecr_verbose(regs);
 
-	pr_info("[EFA]: 0x%08lx\n", current->thread.fault_address);
-	pr_info("[ERET]: 0x%08lx (PC of Faulting Instr)\n", regs->ret);
+	pr_info("[EFA   ]: 0x%08lx\n[BLINK ]: %pS\n[ERET  ]: %pS\n",
+		current->thread.fault_address,
+		(void *)regs->blink, (void *)regs->ret);
 
+	if (user_mode(regs))
 		show_faulting_vma(regs->ret, buf); /* faulting code, not data */
 
-	/* can't use print_vma_addr() yet as it doesn't check for
-	 * non-inclusive vma
-	 */
+	pr_info("[STAT32]: 0x%08lx", regs->status32);
+
+#define STS_BIT(r, bit)	r->status32 & STATUS_##bit##_MASK ? #bit : ""
+	if (!user_mode(regs))
+		pr_cont(" : %2s %2s %2s %2s %2s\n",
+			STS_BIT(regs, AE), STS_BIT(regs, A2), STS_BIT(regs, A1),
+			STS_BIT(regs, E2), STS_BIT(regs, E1));
 
-	/* print special regs */
-	pr_info("status32: 0x%08lx\n", regs->status32);
-	pr_info(" SP: 0x%08lx\tFP: 0x%08lx\n", regs->sp, regs->fp);
-	pr_info("BTA: 0x%08lx\tBLINK: 0x%08lx\n",
-		regs->bta, regs->blink);
+	pr_info("BTA: 0x%08lx\t SP: 0x%08lx\t FP: 0x%08lx\n",
+		regs->bta, regs->sp, regs->fp);
 	pr_info("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n",
 	       regs->lp_start, regs->lp_end, regs->lp_count);
 

arch/arc/mm/extable.c

@@ -27,7 +27,7 @@ int fixup_exception(struct pt_regs *regs)
 
 #ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
 
-long arc_copy_from_user_noinline(void *to, const void __user * from,
+long arc_copy_from_user_noinline(void *to, const void __user *from,
 		unsigned long n)
 {
 	return __arc_copy_from_user(to, from, n);
@@ -48,7 +48,7 @@ unsigned long arc_clear_user_noinline(void __user *to,
 }
 EXPORT_SYMBOL(arc_clear_user_noinline);
 
-long arc_strncpy_from_user_noinline (char *dst, const char __user *src,
+long arc_strncpy_from_user_noinline(char *dst, const char __user *src,
 		long count)
 {
 	return __arc_strncpy_from_user(dst, src, count);

arch/arc/mm/fault.c

@@ -12,7 +12,6 @@
 #include <linux/sched.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
-#include <linux/version.h>
 #include <linux/uaccess.h>
 #include <linux/kdebug.h>
 #include <asm/pgalloc.h>

arch/arc/mm/init.c

@@ -10,9 +10,6 @@
 #include <linux/mm.h>
 #include <linux/bootmem.h>
 #include <linux/memblock.h>
-#ifdef CONFIG_BLOCK_DEV_RAM
-#include <linux/blk.h>
-#endif
 #include <linux/swap.h>
 #include <linux/module.h>
 #include <asm/page.h>

arch/arc/mm/ioremap.c

@@ -12,7 +12,7 @@
 #include <linux/io.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
-#include <asm/cache.h>
+#include <linux/cache.h>
 
 void __iomem *ioremap(unsigned long paddr, unsigned long size)
 {

arch/arc/mm/tlb.c

@@ -418,23 +418,37 @@ void create_tlb(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
 	local_irq_restore(flags);
 }
 
-/* arch hook called by core VM at the end of handle_mm_fault( ),
- * when a new PTE is entered in Page Tables or an existing one
- * is modified. We aggresively pre-install a TLB entry
+/*
+ * Called at the end of pagefault, for a userspace mapped page
+ *  -pre-install the corresponding TLB entry into MMU
+ *  -Finalize the delayed D-cache flush (wback+inv kernel mapping)
  */
-
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddress,
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
 		      pte_t *ptep)
 {
+	unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
+
+	create_tlb(vma, vaddr, ptep);
 
-	create_tlb(vma, vaddress, ptep);
+	/* icache doesn't snoop dcache, thus needs to be made coherent here */
+	if (vma->vm_flags & VM_EXEC) {
+		struct page *page = pfn_to_page(pte_pfn(*ptep));
+
+		/* if page was dcache dirty, flush now */
+		int dirty = test_and_clear_bit(PG_arch_1, &page->flags);
+		if (dirty) {
+			unsigned long paddr =  pte_val(*ptep) & PAGE_MASK;
+			__flush_dcache_page(paddr);
+			__inv_icache_page(paddr, vaddr);
+		}
+	}
 }
 
 /* Read the Cache Build Confuration Registers, Decode them and save into
  * the cpuinfo structure for later use.
  * No Validation is done here, simply read/convert the BCRs
  */
-void __init read_decode_mmu_bcr(void)
+void __cpuinit read_decode_mmu_bcr(void)
 {
 	unsigned int tmp;
 	struct bcr_mmu_1_2 *mmu2;	/* encoded MMU2 attr */
@@ -466,7 +480,7 @@ void __init read_decode_mmu_bcr(void)
 char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
 {
 	int n = 0;
-	struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
+	struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[cpu_id].mmu;
 
 	n += scnprintf(buf + n, len - n, "ARC700 MMU [v%x]\t: %dk PAGE, ",
 		       p_mmu->ver, TO_KB(p_mmu->pg_sz));
@@ -480,7 +494,7 @@ char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
 	return buf;
 }
 
-void __init arc_mmu_init(void)
+void __cpuinit arc_mmu_init(void)
 {
 	char str[256];
 	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;

arch/arc/plat-arcfpga/platform.c

@@ -224,3 +224,15 @@ MACHINE_START(ML509, "ml509")
 	.init_smp	= iss_model_init_smp,
 #endif
 MACHINE_END
+
+static const char *nsimosci_compat[] __initdata = {
+	"snps,nsimosci",
+	NULL,
+};
+
+MACHINE_START(NSIMOSCI, "nsimosci")
+	.dt_compat	= nsimosci_compat,
+	.init_early	= NULL,
+	.init_machine	= plat_fpga_populate_dev,
+	.init_irq	= NULL,
+MACHINE_END

arch/arc/plat-tb10x/Kconfig

+# Abilis Systems TB10x platform kernel configuration file
+#
+# Author: Christian Ruppert <christian.ruppert@abilis.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+
+
+menuconfig ARC_PLAT_TB10X
+	bool "Abilis TB10x"
+	select COMMON_CLK
+	select PINCTRL
+	select PINMUX
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for platforms based on the TB10x home media gateway SOC by
+	  Abilis Systems. TB10x is based on the ARC700 CPU architecture.
+	  Say Y if you are building a kernel for one of the SOCs in this
+	  series (e.g. TB100 or TB101). If in doubt say N.
+
+if ARC_PLAT_TB10X
+
+config GENERIC_GPIO
+	def_bool y
+
+endif

arch/arc/plat-tb10x/Makefile

+# Abilis Systems TB10x platform Makefile
+#
+# Author: Christian Ruppert <christian.ruppert@abilis.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+
+
+KBUILD_CFLAGS   += -Iarch/arc/plat-tb10x/include
+
+obj-y += tb10x.o

arch/arc/plat-tb10x/tb10x.c

+/*
+ * Abilis Systems TB10x platform initialisation
+ *
+ * Copyright (C) Abilis Systems 2012
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/clk-provider.h>
+#include <linux/pinctrl/consumer.h>
+
+#include <asm/mach_desc.h>
+
+
+static void __init tb10x_platform_init(void)
+{
+	of_clk_init(NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static void __init tb10x_platform_late_init(void)
+{
+	struct device_node *dn;
+
+	/*
+	 * Pinctrl documentation recommends setting up the iomux here for
+	 * all modules which don't require control over the pins themselves.
+	 * Modules which need this kind of assistance are compatible with
+	 * "abilis,simple-pinctrl", i.e. we can easily iterate over them.
+	 * TODO: Does this recommended method work cleanly with pins required
+	 * by modules?
+	 */
+	for_each_compatible_node(dn, NULL, "abilis,simple-pinctrl") {
+		struct platform_device *pd = of_find_device_by_node(dn);
+		struct pinctrl *pctl;
+
+		pctl = pinctrl_get_select(&pd->dev, "abilis,simple-default");
+		if (IS_ERR(pctl)) {
+			int ret = PTR_ERR(pctl);
+			dev_err(&pd->dev, "Could not set up pinctrl: %d\n",
+				ret);
+		}
+	}
+}
+
+static const char *tb10x_compat[] __initdata = {
+	"abilis,arc-tb10x",
+	NULL,
+};
+
+MACHINE_START(TB10x, "tb10x")
+	.dt_compat	= tb10x_compat,
+	.init_machine	= tb10x_platform_init,
+	.init_late	= tb10x_platform_late_init,
+MACHINE_END