Merge tag 'phy-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull phy fixes from Vinod Koul:

 - init count imbalance fix in qcom-qmp-pcie and combo drivers

 - kernel doc header fix for qcom-snps driver

 - mediatek floating point comparison fix

 - amlogic fix register value

* tag 'phy-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: qcom-snps: correct struct qcom_snps_hsphy kerneldoc
  phy: amlogic: phy-meson-g12a-mipi-dphy-analog: fix CNTL2_DIF_TX_CTL0 value
  phy: mediatek: rework the floating point comparisons to fixed point
  phy: qcom-qmp-pcie-msm8996: fix init-count imbalance
  phy: qcom-qmp-combo: fix init-count imbalance

drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c

@@ -70,7 +70,7 @@ static int phy_g12a_mipi_dphy_analog_power_on(struct phy *phy)
 		     HHI_MIPI_CNTL1_BANDGAP);
 
 	regmap_write(priv->regmap, HHI_MIPI_CNTL2,
-		     FIELD_PREP(HHI_MIPI_CNTL2_DIF_TX_CTL0, 0x459) |
+		     FIELD_PREP(HHI_MIPI_CNTL2_DIF_TX_CTL0, 0x45a) |
 		     FIELD_PREP(HHI_MIPI_CNTL2_DIF_TX_CTL1, 0x2680));
 
 	reg = DSI_LANE_CLK;

drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c

@@ -237,11 +237,11 @@ static int mtk_hdmi_pll_calc(struct mtk_hdmi_phy *hdmi_phy, struct clk_hw *hw,
 	 */
 	if (tmds_clk < 54 * MEGA)
 		txposdiv = 8;
-	else if (tmds_clk >= 54 * MEGA && tmds_clk < 148.35 * MEGA)
+	else if (tmds_clk >= 54 * MEGA && (tmds_clk * 100) < 14835 * MEGA)
 		txposdiv = 4;
-	else if (tmds_clk >= 148.35 * MEGA && tmds_clk < 296.7 * MEGA)
+	else if ((tmds_clk * 100) >= 14835 * MEGA && (tmds_clk * 10) < 2967 * MEGA)
 		txposdiv = 2;
-	else if (tmds_clk >= 296.7 * MEGA && tmds_clk <= 594 * MEGA)
+	else if ((tmds_clk * 10) >= 2967 * MEGA && tmds_clk <= 594 * MEGA)
 		txposdiv = 1;
 	else
 		return -EINVAL;
@@ -324,12 +324,12 @@ static int mtk_hdmi_pll_drv_setting(struct clk_hw *hw)
 		clk_channel_bias = 0x34; /* 20mA */
 		impedance_en = 0xf;
 		impedance = 0x36; /* 100ohm */
-	} else if (pixel_clk >= 74.175 * MEGA && pixel_clk <= 300 * MEGA) {
+	} else if (((u64)pixel_clk * 1000) >= 74175 * MEGA && pixel_clk <= 300 * MEGA) {
 		data_channel_bias = 0x34; /* 20mA */
 		clk_channel_bias = 0x2c; /* 16mA */
 		impedance_en = 0xf;
 		impedance = 0x36; /* 100ohm */
-	} else if (pixel_clk >= 27 * MEGA && pixel_clk < 74.175 * MEGA) {
+	} else if (pixel_clk >= 27 * MEGA && ((u64)pixel_clk * 1000) < 74175 * MEGA) {
 		data_channel_bias = 0x14; /* 10mA */
 		clk_channel_bias = 0x14; /* 10mA */
 		impedance_en = 0x0;

drivers/phy/qualcomm/phy-qcom-qmp-combo.c

@@ -2472,7 +2472,7 @@ static int qmp_combo_com_init(struct qmp_combo *qmp)
 	ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
 	if (ret) {
 		dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
-		goto err_unlock;
+		goto err_decrement_count;
 	}
 
 	ret = reset_control_bulk_assert(cfg->num_resets, qmp->resets);
@@ -2522,7 +2522,8 @@ static int qmp_combo_com_init(struct qmp_combo *qmp)
 	reset_control_bulk_assert(cfg->num_resets, qmp->resets);
 err_disable_regulators:
 	regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
-err_unlock:
+err_decrement_count:
+	qmp->init_count--;
 	mutex_unlock(&qmp->phy_mutex);
 
 	return ret;

drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c

@@ -379,7 +379,7 @@ static int qmp_pcie_msm8996_com_init(struct qmp_phy *qphy)
 	ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
 	if (ret) {
 		dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
-		goto err_unlock;
+		goto err_decrement_count;
 	}
 
 	ret = reset_control_bulk_assert(cfg->num_resets, qmp->resets);
@@ -409,7 +409,8 @@ static int qmp_pcie_msm8996_com_init(struct qmp_phy *qphy)
 	reset_control_bulk_assert(cfg->num_resets, qmp->resets);
 err_disable_regulators:
 	regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
-err_unlock:
+err_decrement_count:
+	qmp->init_count--;
 	mutex_unlock(&qmp->phy_mutex);
 
 	return ret;

drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c

@@ -115,11 +115,11 @@ struct phy_override_seq {
  *
  * @cfg_ahb_clk: AHB2PHY interface clock
  * @ref_clk: phy reference clock
- * @iface_clk: phy interface clock
  * @phy_reset: phy reset control
  * @vregs: regulator supplies bulk data
  * @phy_initialized: if PHY has been initialized correctly
  * @mode: contains the current mode the PHY is in
+ * @update_seq_cfg: tuning parameters for phy init
  */
 struct qcom_snps_hsphy {
 	struct phy *phy;