Commit e3d13ff4 authored by Sascha Hauer's avatar Sascha Hauer Committed by Robert Schwebel

mxc: add MX3 support for i.MX internal UART driver

This patch adds MX3 support for the i.MX internal uart driver.
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
parent df1bf4bd
......@@ -4,5 +4,5 @@
# Object file lists.
obj-y := mm.o time.o clock.o
obj-y := mm.o time.o clock.o devices.o
obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
/*
* Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Sascha Hauer, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <asm/hardware.h>
#include <asm/arch/imx-uart.h>
static struct resource uart0[] = {
{
.start = UART1_BASE_ADDR,
.end = UART1_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_UART1,
.end = MXC_INT_UART1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mxc_uart_device0 = {
.name = "imx-uart",
.id = 0,
.resource = uart0,
.num_resources = ARRAY_SIZE(uart0),
};
static struct resource uart1[] = {
{
.start = UART2_BASE_ADDR,
.end = UART2_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_UART2,
.end = MXC_INT_UART2,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mxc_uart_device1 = {
.name = "imx-uart",
.id = 1,
.resource = uart1,
.num_resources = ARRAY_SIZE(uart1),
};
static struct resource uart2[] = {
{
.start = UART3_BASE_ADDR,
.end = UART3_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_UART3,
.end = MXC_INT_UART3,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mxc_uart_device2 = {
.name = "imx-uart",
.id = 2,
.resource = uart2,
.num_resources = ARRAY_SIZE(uart2),
};
static struct resource uart3[] = {
{
.start = UART4_BASE_ADDR,
.end = UART4_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_UART4,
.end = MXC_INT_UART4,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mxc_uart_device3 = {
.name = "imx-uart",
.id = 3,
.resource = uart3,
.num_resources = ARRAY_SIZE(uart3),
};
static struct resource uart4[] = {
{
.start = UART5_BASE_ADDR,
.end = UART5_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_UART5,
.end = MXC_INT_UART5,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mxc_uart_device4 = {
.name = "imx-uart",
.id = 4,
.resource = uart4,
.num_resources = ARRAY_SIZE(uart4),
};
/*
* Register only those UARTs that physically exist
*/
int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata)
{
switch (uart_no) {
case 0:
mxc_uart_device0.dev.platform_data = pdata;
platform_device_register(&mxc_uart_device0);
break;
case 1:
mxc_uart_device1.dev.platform_data = pdata;
platform_device_register(&mxc_uart_device1);
break;
case 2:
mxc_uart_device2.dev.platform_data = pdata;
platform_device_register(&mxc_uart_device2);
break;
case 3:
mxc_uart_device3.dev.platform_data = pdata;
platform_device_register(&mxc_uart_device3);
break;
case 4:
mxc_uart_device4.dev.platform_data = pdata;
platform_device_register(&mxc_uart_device4);
break;
default:
return -ENODEV;
}
return 0;
}
......@@ -753,7 +753,7 @@ config BFIN_UART3_CTSRTS
config SERIAL_IMX
bool "IMX serial port support"
depends on ARM && ARCH_IMX
depends on ARM && (ARCH_IMX || ARCH_MXC)
select SERIAL_CORE
help
If you have a machine based on a Motorola IMX CPU you
......
......@@ -62,6 +62,11 @@
#define UBIR 0xa4 /* BRM Incremental Register */
#define UBMR 0xa8 /* BRM Modulator Register */
#define UBRC 0xac /* Baud Rate Count Register */
#ifdef CONFIG_ARCH_MX3
#define ONEMS 0xb0 /* One Millisecond register */
#define UTS 0xb4 /* UART Test Register */
#endif
#ifdef CONFIG_ARCH_IMX
#define BIPR1 0xb0 /* Incremental Preset Register 1 */
#define BIPR2 0xb4 /* Incremental Preset Register 2 */
#define BIPR3 0xb8 /* Incremental Preset Register 3 */
......@@ -71,6 +76,7 @@
#define BMPR3 0xc8 /* BRM Modulator Register 3 */
#define BMPR4 0xcc /* BRM Modulator Register 4 */
#define UTS 0xd0 /* UART Test Register */
#endif
/* UART Control Register Bit Fields.*/
#define URXD_CHARRDY (1<<15)
......@@ -90,7 +96,12 @@
#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
#define UCR1_SNDBRK (1<<4) /* Send break */
#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
#ifdef CONFIG_ARCH_IMX
#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
#endif
#ifdef CONFIG_ARCH_MX3
#define UCR1_UARTCLKEN (0) /* not present on mx2/mx3 */
#endif
#define UCR1_DOZE (1<<1) /* Doze */
#define UCR1_UARTEN (1<<0) /* UART enabled */
#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
......@@ -164,8 +175,19 @@
#define UTS_SOFTRST (1<<0) /* Software reset */
/* We've been assigned a range on the "Low-density serial ports" major */
#ifdef CONFIG_ARCH_IMX
#define SERIAL_IMX_MAJOR 204
#define MINOR_START 41
#define DEV_NAME "ttySMX"
#define MAX_INTERNAL_IRQ IMX_IRQS
#endif
#ifdef CONFIG_ARCH_MX3
#define SERIAL_IMX_MAJOR 207
#define MINOR_START 16
#define DEV_NAME "ttymxc"
#define MAX_INTERNAL_IRQ MXC_MAX_INT_LINES
#endif
/*
* This determines how often we check the modem status signals
......@@ -409,6 +431,26 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
return IRQ_HANDLED;
}
static irqreturn_t imx_int(int irq, void *dev_id)
{
struct imx_port *sport = dev_id;
unsigned int sts;
sts = readl(sport->port.membase + USR1);
if (sts & USR1_RRDY)
imx_rxint(irq, dev_id);
if (sts & USR1_TRDY &&
readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
imx_txint(irq, dev_id);
if (sts & USR1_RTSS)
imx_rtsint(irq, dev_id);
return IRQ_HANDLED;
}
/*
* Return TIOCSER_TEMT when transmitter is not busy.
*/
......@@ -514,21 +556,34 @@ static int imx_startup(struct uart_port *port)
writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
/*
* Allocate the IRQ
* Allocate the IRQ(s) i.MX1 has three interrupts whereas later
* chips only have one interrupt.
*/
if (sport->txirq > 0) {
retval = request_irq(sport->rxirq, imx_rxint, 0,
DRIVER_NAME, sport);
if (retval) goto error_out1;
if (retval)
goto error_out1;
retval = request_irq(sport->txirq, imx_txint, 0,
DRIVER_NAME, sport);
if (retval) goto error_out2;
if (retval)
goto error_out2;
retval = request_irq(sport->rtsirq, imx_rtsint,
(sport->rtsirq < IMX_IRQS) ? 0 :
(sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
DRIVER_NAME, sport);
if (retval) goto error_out3;
if (retval)
goto error_out3;
} else {
retval = request_irq(sport->port.irq, imx_int, 0,
DRIVER_NAME, sport);
if (retval) {
free_irq(sport->port.irq, sport);
goto error_out1;
}
}
/*
* Finally, clear and enable interrupts
......@@ -553,8 +608,10 @@ static int imx_startup(struct uart_port *port)
return 0;
error_out3:
if (sport->txirq)
free_irq(sport->txirq, sport);
error_out2:
if (sport->rxirq)
free_irq(sport->rxirq, sport);
error_out1:
return retval;
......@@ -573,9 +630,12 @@ static void imx_shutdown(struct uart_port *port)
/*
* Free the interrupts
*/
if (sport->txirq > 0) {
free_irq(sport->rtsirq, sport);
free_irq(sport->txirq, sport);
free_irq(sport->rxirq, sport);
} else
free_irq(sport->port.irq, sport);
/*
* Disable all interrupts, port and break condition.
......@@ -973,7 +1033,7 @@ imx_console_setup(struct console *co, char *options)
static struct uart_driver imx_reg;
static struct console imx_console = {
.name = "ttySMX",
.name = DEV_NAME,
.write = imx_console_write,
.device = uart_console_device,
.setup = imx_console_setup,
......@@ -990,7 +1050,7 @@ static struct console imx_console = {
static struct uart_driver imx_reg = {
.owner = THIS_MODULE,
.driver_name = DRIVER_NAME,
.dev_name = "ttySMX",
.dev_name = DEV_NAME,
.major = SERIAL_IMX_MAJOR,
.minor = MINOR_START,
.nr = ARRAY_SIZE(imx_ports),
......
/*
* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef ASMARM_ARCH_UART_H
#define ASMARM_ARCH_UART_H
#define IMXUART_HAVE_RTSCTS (1<<0)
struct imxuart_platform_data {
int (*init)(struct platform_device *pdev);
int (*exit)(struct platform_device *pdev);
unsigned int flags;
};
int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment