Commit e4553573 authored by Maciej W. Rozycki's avatar Maciej W. Rozycki Committed by Ralf Baechle

MIPS: math-emu: Correctly handle NOP emulation

Fix an issue introduced with commit 9ab4471c ("MIPS: math-emu:
Correct delay-slot exception propagation") where the emulation of a NOP
instruction signals the need to terminate the emulation loop.  This in
turn, if the PC has not changed from the entry to the loop, will cause
the kernel to terminate the program with SIGILL.

Consider this program:

static double div(double d)
{
	do
		d /= 2.0;
	while (d > .5);
	return d;
}

int main(int argc, char **argv)
{
	return div(argc);
}

which gets compiled to the following binary code:

00400490 <main>:
  400490:	44840000 	mtc1	a0,$f0
  400494:	3c020040 	lui	v0,0x40
  400498:	d44207f8 	ldc1	$f2,2040(v0)
  40049c:	46800021 	cvt.d.w	$f0,$f0
  4004a0:	46220002 	mul.d	$f0,$f0,$f2
  4004a4:	4620103c 	c.lt.d	$f2,$f0
  4004a8:	4501fffd 	bc1t	4004a0 <main+0x10>
  4004ac:	00000000 	nop
  4004b0:	4620000d 	trunc.w.d	$f0,$f0
  4004b4:	03e00008 	jr	ra
  4004b8:	44020000 	mfc1	v0,$f0
  4004bc:	00000000 	nop

Where the FPU emulator is used, depending on the number of command-line
arguments this code will either run to completion or terminate with
SIGILL.

If no arguments are specified, then BC1T will not be taken, NOP will not
be emulated and code will complete successfully.

If one argument is specified, then BC1T will be taken once and NOP will
be emulated.  At this point the entry PC value will be 0x400498 and the
new PC value, set by `mips_dsemul' will be 0x4004a0, the target of BC1T.
The emulation loop will terminate, but SIGILL will not be issued,
because the PC has changed.  The FPU emulator will be entered again and
on the second execution BC1T will not be taken, NOP will not be emulated
and code will complete successfully.

If two or more arguments are specified, then the first execution of BC1T
will proceed as above.  Upon reentering the FPU emulator the emulation
loop will continue to BC1T, at which point the branch will be taken and
NOP emulated again.  At this point however the entry PC value will be
0x4004a0, the same as the target of BC1T.  This will make the emulator
conclude that execution has not advanced and therefore an unsupported
FPU instruction has been encountered, and SIGILL will be sent to the
process.

Fix the problem by extending the internal API of `mips_dsemul', making
it return -1 if no delay slot emulation frame has been made, the
instruction has been handled and execution of the emulation loop needs
to continue as if nothing happened.  Remove code from `mips_dsemul' to
reproduce steps made by the emulation loop at the conclusion of each
iteration, as those will be reached normally now.  Adjust call sites
accordingly.  Document the API.
Signed-off-by: default avatarMaciej W. Rozycki <macro@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12172/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 4f33f6c5
......@@ -1266,6 +1266,8 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
*/
sig = mips_dsemul(xcp, ir,
contpc);
if (sig < 0)
break;
if (sig)
xcp->cp0_epc = bcpc;
/*
......@@ -1319,6 +1321,8 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
* instruction in the dslot
*/
sig = mips_dsemul(xcp, ir, contpc);
if (sig < 0)
break;
if (sig)
xcp->cp0_epc = bcpc;
/* SIGILL forces out of the emulation loop. */
......
......@@ -31,18 +31,20 @@ struct emuframe {
unsigned long epc;
};
/*
* Set up an emulation frame for instruction IR, from a delay slot of
* a branch jumping to CPC. Return 0 if successful, -1 if no emulation
* required, otherwise a signal number causing a frame setup failure.
*/
int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
{
struct emuframe __user *fr;
int err;
if ((get_isa16_mode(regs->cp0_epc) && ((ir >> 16) == MM_NOP16)) ||
(ir == 0)) {
/* NOP is easy */
regs->cp0_epc = cpc;
clear_delay_slot(regs);
return 0;
}
if ((get_isa16_mode(regs->cp0_epc) && ((ir >> 16) == MM_NOP16)) ||
(ir == 0))
return -1;
pr_debug("dsemul %lx %lx\n", regs->cp0_epc, cpc);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment