Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: blk_rq_err_sectors cleanup
  block: Honor the gfp_mask for alloc_page() in blkdev_issue_discard()
  block: Fix incorrect alignment offset reporting and update documentation
  cfq-iosched: don't regard requests with long distance as close
  aoe: switch to the new bio_flush_dcache_pages() interface
  drivers/block/mg_disk.c: use resource_size()
  drivers/block/DAC960.c: use DAC960_V2_Controller
  block: Fix topology stacking for data and discard alignment
  drbd: remove unused #include <linux/version.h>
  drbd: remove duplicated #include
  drbd: Fix test of unsigned in _drbd_fault_random()
  drbd: Constify struct file_operations
  cfq-iosched: Remove prio_change logic for workload selection
  cfq-iosched: Get rid of nr_groups
  cfq-iosched: Remove the check for same cfq group from allow_merge
  drbd: fix test of unsigned in _drbd_fault_random()
  block: remove Documentation/block/as-iosched.txt

Documentation/block/00-INDEX

 00-INDEX
 	- This file
-as-iosched.txt
-	- Anticipatory IO scheduler
 barrier.txt
 	- I/O Barriers
 biodoc.txt

Documentation/block/as-iosched.txt

-Anticipatory IO scheduler
--------------------------
-Nick Piggin <piggin@cyberone.com.au>    13 Sep 2003
-
-Attention! Database servers, especially those using "TCQ" disks should
-investigate performance with the 'deadline' IO scheduler. Any system with high
-disk performance requirements should do so, in fact.
-
-If you see unusual performance characteristics of your disk systems, or you
-see big performance regressions versus the deadline scheduler, please email
-me. Database users don't bother unless you're willing to test a lot of patches
-from me ;) its a known issue.
-
-Also, users with hardware RAID controllers, doing striping, may find
-highly variable performance results with using the as-iosched. The
-as-iosched anticipatory implementation is based on the notion that a disk
-device has only one physical seeking head.  A striped RAID controller
-actually has a head for each physical device in the logical RAID device.
-
-However, setting the antic_expire (see tunable parameters below) produces
-very similar behavior to the deadline IO scheduler.
-
-Selecting IO schedulers
------------------------
-Refer to Documentation/block/switching-sched.txt for information on
-selecting an io scheduler on a per-device basis.
-
-Anticipatory IO scheduler Policies
-----------------------------------
-The as-iosched implementation implements several layers of policies
-to determine when an IO request is dispatched to the disk controller.
-Here are the policies outlined, in order of application.
-
-1. one-way Elevator algorithm.
-
-The elevator algorithm is similar to that used in deadline scheduler, with
-the addition that it allows limited backward movement of the elevator
-(i.e. seeks backwards).  A seek backwards can occur when choosing between
-two IO requests where one is behind the elevator's current position, and
-the other is in front of the elevator's position. If the seek distance to
-the request in back of the elevator is less than half the seek distance to
-the request in front of the elevator, then the request in back can be chosen.
-Backward seeks are also limited to a maximum of MAXBACK (1024*1024) sectors.
-This favors forward movement of the elevator, while allowing opportunistic
-"short" backward seeks.
-
-2. FIFO expiration times for reads and for writes.
-
-This is again very similar to the deadline IO scheduler.  The expiration
-times for requests on these lists is tunable using the parameters read_expire
-and write_expire discussed below.  When a read or a write expires in this way,
-the IO scheduler will interrupt its current elevator sweep or read anticipation
-to service the expired request.
-
-3. Read and write request batching
-
-A batch is a collection of read requests or a collection of write
-requests.  The as scheduler alternates dispatching read and write batches
-to the driver.  In the case a read batch, the scheduler submits read
-requests to the driver as long as there are read requests to submit, and
-the read batch time limit has not been exceeded (read_batch_expire).
-The read batch time limit begins counting down only when there are
-competing write requests pending.
-
-In the case of a write batch, the scheduler submits write requests to
-the driver as long as there are write requests available, and the
-write batch time limit has not been exceeded (write_batch_expire).
-However, the length of write batches will be gradually shortened
-when read batches frequently exceed their time limit.
-
-When changing between batch types, the scheduler waits for all requests
-from the previous batch to complete before scheduling requests for the
-next batch.
-
-The read and write fifo expiration times described in policy 2 above
-are checked only when in scheduling IO of a batch for the corresponding
-(read/write) type.  So for example, the read FIFO timeout values are
-tested only during read batches.  Likewise, the write FIFO timeout
-values are tested only during write batches.  For this reason,
-it is generally not recommended for the read batch time
-to be longer than the write expiration time, nor for the write batch
-time to exceed the read expiration time (see tunable parameters below).
-
-When the IO scheduler changes from a read to a write batch,
-it begins the elevator from the request that is on the head of the
-write expiration FIFO.  Likewise, when changing from a write batch to
-a read batch, scheduler begins the elevator from the first entry
-on the read expiration FIFO.
-
-4. Read anticipation.
-
-Read anticipation occurs only when scheduling a read batch.
-This implementation of read anticipation allows only one read request
-to be dispatched to the disk controller at a time.  In
-contrast, many write requests may be dispatched to the disk controller
-at a time during a write batch.  It is this characteristic that can make
-the anticipatory scheduler perform anomalously with controllers supporting
-TCQ, or with hardware striped RAID devices. Setting the antic_expire
-queue parameter (see below) to zero disables this behavior, and the 
-anticipatory scheduler behaves essentially like the deadline scheduler.
-
-When read anticipation is enabled (antic_expire is not zero), reads
-are dispatched to the disk controller one at a time.
-At the end of each read request, the IO scheduler examines its next
-candidate read request from its sorted read list.  If that next request
-is from the same process as the request that just completed,
-or if the next request in the queue is "very close" to the
-just completed request, it is dispatched immediately.  Otherwise,
-statistics (average think time, average seek distance) on the process
-that submitted the just completed request are examined.  If it seems
-likely that that process will submit another request soon, and that
-request is likely to be near the just completed request, then the IO
-scheduler will stop dispatching more read requests for up to (antic_expire)
-milliseconds, hoping that process will submit a new request near the one
-that just completed.  If such a request is made, then it is dispatched
-immediately.  If the antic_expire wait time expires, then the IO scheduler
-will dispatch the next read request from the sorted read queue.
-
-To decide whether an anticipatory wait is worthwhile, the scheduler
-maintains statistics for each process that can be used to compute
-mean "think time" (the time between read requests), and mean seek
-distance for that process.  One observation is that these statistics
-are associated with each process, but those statistics are not associated
-with a specific IO device.  So for example, if a process is doing IO
-on several file systems on separate devices, the statistics will be
-a combination of IO behavior from all those devices.
-
-
-Tuning the anticipatory IO scheduler
-------------------------------------
-When using 'as', the anticipatory IO scheduler there are 5 parameters under
-/sys/block/*/queue/iosched/. All are units of milliseconds.
-
-The parameters are:
-* read_expire
-    Controls how long until a read request becomes "expired". It also controls the
-    interval between which expired requests are served, so set to 50, a request
-    might take anywhere < 100ms to be serviced _if_ it is the next on the
-    expired list. Obviously request expiration strategies won't make the disk
-    go faster. The result basically equates to the timeslice a single reader
-    gets in the presence of other IO. 100*((seek time / read_expire) + 1) is
-    very roughly the % streaming read efficiency your disk should get with
-    multiple readers.
-
-* read_batch_expire
-    Controls how much time a batch of reads is given before pending writes are
-    served. A higher value is more efficient. This might be set below read_expire
-    if writes are to be given higher priority than reads, but reads are to be
-    as efficient as possible when there are no writes. Generally though, it
-    should be some multiple of read_expire.
-
-* write_expire, and
-* write_batch_expire are equivalent to the above, for writes.
-
-* antic_expire
-    Controls the maximum amount of time we can anticipate a good read (one
-    with a short seek distance from the most recently completed request) before
-    giving up. Many other factors may cause anticipation to be stopped early,
-    or some processes will not be "anticipated" at all. Should be a bit higher
-    for big seek time devices though not a linear correspondence - most
-    processes have only a few ms thinktime.
-
-In addition to the tunables above there is a read-only file named est_time
-which, when read, will show:
-
-    - The probability of a task exiting without a cooperating task
-      submitting an anticipated IO.
-
-    - The current mean think time.
-
-    - The seek distance used to determine if an incoming IO is better.
-

block/blk-barrier.c

@@ -402,7 +402,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
 		 * our current implementations need.  If we'll ever need
 		 * more the interface will need revisiting.
 		 */
-		page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+		page = alloc_page(gfp_mask | __GFP_ZERO);
 		if (!page)
 			goto out_free_bio;
 		if (bio_add_pc_page(q, bio, page, sector_size, 0) < sector_size)

block/blk-settings.c

@@ -505,21 +505,30 @@ static unsigned int lcm(unsigned int a, unsigned int b)
 
 /**
  * blk_stack_limits - adjust queue_limits for stacked devices
- * @t:	the stacking driver limits (top)
- * @b:  the underlying queue limits (bottom)
+ * @t:	the stacking driver limits (top device)
+ * @b:  the underlying queue limits (bottom, component device)
  * @offset:  offset to beginning of data within component device
  *
  * Description:
- *    Merges two queue_limit structs.  Returns 0 if alignment didn't
- *    change.  Returns -1 if adding the bottom device caused
- *    misalignment.
+ *    This function is used by stacking drivers like MD and DM to ensure
+ *    that all component devices have compatible block sizes and
+ *    alignments.  The stacking driver must provide a queue_limits
+ *    struct (top) and then iteratively call the stacking function for
+ *    all component (bottom) devices.  The stacking function will
+ *    attempt to combine the values and ensure proper alignment.
+ *
+ *    Returns 0 if the top and bottom queue_limits are compatible.  The
+ *    top device's block sizes and alignment offsets may be adjusted to
+ *    ensure alignment with the bottom device. If no compatible sizes
+ *    and alignments exist, -1 is returned and the resulting top
+ *    queue_limits will have the misaligned flag set to indicate that
+ *    the alignment_offset is undefined.
  */
 int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 		     sector_t offset)
 {
-	int ret;
-
-	ret = 0;
+	sector_t alignment;
+	unsigned int top, bottom;
 
 	t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
 	t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
@@ -537,6 +546,22 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 	t->max_segment_size = min_not_zero(t->max_segment_size,
 					   b->max_segment_size);
 
+	alignment = queue_limit_alignment_offset(b, offset);
+
+	/* Bottom device has different alignment.  Check that it is
+	 * compatible with the current top alignment.
+	 */
+	if (t->alignment_offset != alignment) {
+
+		top = max(t->physical_block_size, t->io_min)
+			+ t->alignment_offset;
+		bottom = max(b->physical_block_size, b->io_min) + alignment;
+
+		/* Verify that top and bottom intervals line up */
+		if (max(top, bottom) & (min(top, bottom) - 1))
+			t->misaligned = 1;
+	}
+
 	t->logical_block_size = max(t->logical_block_size,
 				    b->logical_block_size);
 
@@ -544,54 +569,64 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 				     b->physical_block_size);
 
 	t->io_min = max(t->io_min, b->io_min);
+	t->io_opt = lcm(t->io_opt, b->io_opt);
+
 	t->no_cluster |= b->no_cluster;
 	t->discard_zeroes_data &= b->discard_zeroes_data;
 
-	/* Bottom device offset aligned? */
-	if (offset &&
-	    (offset & (b->physical_block_size - 1)) != b->alignment_offset) {
+	/* Physical block size a multiple of the logical block size? */
+	if (t->physical_block_size & (t->logical_block_size - 1)) {
+		t->physical_block_size = t->logical_block_size;
 		t->misaligned = 1;
-		ret = -1;
 	}
 
-	/*
-	 * Temporarily disable discard granularity. It's currently buggy
-	 * since we default to 0 for discard_granularity, hence this
-	 * "failure" will always trigger for non-zero offsets.
-	 */
-#if 0
-	if (offset &&
-	    (offset & (b->discard_granularity - 1)) != b->discard_alignment) {
-		t->discard_misaligned = 1;
-		ret = -1;
+	/* Minimum I/O a multiple of the physical block size? */
+	if (t->io_min & (t->physical_block_size - 1)) {
+		t->io_min = t->physical_block_size;
+		t->misaligned = 1;
 	}
-#endif
 
-	/* If top has no alignment offset, inherit from bottom */
-	if (!t->alignment_offset)
-		t->alignment_offset =
-			b->alignment_offset & (b->physical_block_size - 1);
+	/* Optimal I/O a multiple of the physical block size? */
+	if (t->io_opt & (t->physical_block_size - 1)) {
+		t->io_opt = 0;
+		t->misaligned = 1;
+	}
 
-	if (!t->discard_alignment)
-		t->discard_alignment =
-			b->discard_alignment & (b->discard_granularity - 1);
+	/* Find lowest common alignment_offset */
+	t->alignment_offset = lcm(t->alignment_offset, alignment)
+		& (max(t->physical_block_size, t->io_min) - 1);
 
-	/* Top device aligned on logical block boundary? */
-	if (t->alignment_offset & (t->logical_block_size - 1)) {
+	/* Verify that new alignment_offset is on a logical block boundary */
+	if (t->alignment_offset & (t->logical_block_size - 1))
 		t->misaligned = 1;
-		ret = -1;
+
+	/* Discard alignment and granularity */
+	if (b->discard_granularity) {
+		unsigned int granularity = b->discard_granularity;
+		offset &= granularity - 1;
+
+		alignment = (granularity + b->discard_alignment - offset)
+			& (granularity - 1);
+
+		if (t->discard_granularity != 0 &&
+		    t->discard_alignment != alignment) {
+			top = t->discard_granularity + t->discard_alignment;
+			bottom = b->discard_granularity + alignment;
+
+			/* Verify that top and bottom intervals line up */
+			if (max(top, bottom) & (min(top, bottom) - 1))
+				t->discard_misaligned = 1;
 		}
 
-	/* Find lcm() of optimal I/O size and granularity */
-	t->io_opt = lcm(t->io_opt, b->io_opt);
-	t->discard_granularity = lcm(t->discard_granularity,
+		t->max_discard_sectors = min_not_zero(t->max_discard_sectors,
+						      b->max_discard_sectors);
+		t->discard_granularity = max(t->discard_granularity,
 					     b->discard_granularity);
+		t->discard_alignment = lcm(t->discard_alignment, alignment) &
+			(t->discard_granularity - 1);
+	}
 
-	/* Verify that optimal I/O size is a multiple of io_min */
-	if (t->io_min && t->io_opt % t->io_min)
-		ret = -1;
-
-	return ret;
+	return t->misaligned ? -1 : 0;
 }
 EXPORT_SYMBOL(blk_stack_limits);
 

block/cfq-iosched.c

@@ -208,8 +208,6 @@ struct cfq_data {
 	/* Root service tree for cfq_groups */
 	struct cfq_rb_root grp_service_tree;
 	struct cfq_group root_group;
-	/* Number of active cfq groups on group service tree */
-	int nr_groups;
 
 	/*
 	 * The priority currently being served
@@ -294,8 +292,7 @@ static struct cfq_group *cfq_get_next_cfqg(struct cfq_data *cfqd);
 
 static struct cfq_rb_root *service_tree_for(struct cfq_group *cfqg,
 					    enum wl_prio_t prio,
-					    enum wl_type_t type,
-					    struct cfq_data *cfqd)
+					    enum wl_type_t type)
 {
 	if (!cfqg)
 		return NULL;
@@ -842,7 +839,6 @@ cfq_group_service_tree_add(struct cfq_data *cfqd, struct cfq_group *cfqg)
 
 	__cfq_group_service_tree_add(st, cfqg);
 	cfqg->on_st = true;
-	cfqd->nr_groups++;
 	st->total_weight += cfqg->weight;
 }
 
@@ -863,7 +859,6 @@ cfq_group_service_tree_del(struct cfq_data *cfqd, struct cfq_group *cfqg)
 
 	cfq_log_cfqg(cfqd, cfqg, "del_from_rr group");
 	cfqg->on_st = false;
-	cfqd->nr_groups--;
 	st->total_weight -= cfqg->weight;
 	if (!RB_EMPTY_NODE(&cfqg->rb_node))
 		cfq_rb_erase(&cfqg->rb_node, st);
@@ -1150,7 +1145,7 @@ static void cfq_service_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 #endif
 
 	service_tree = service_tree_for(cfqq->cfqg, cfqq_prio(cfqq),
-						cfqq_type(cfqq), cfqd);
+						cfqq_type(cfqq));
 	if (cfq_class_idle(cfqq)) {
 		rb_key = CFQ_IDLE_DELAY;
 		parent = rb_last(&service_tree->rb);
@@ -1513,9 +1508,6 @@ static int cfq_allow_merge(struct request_queue *q, struct request *rq,
 	struct cfq_io_context *cic;
 	struct cfq_queue *cfqq;
 
-	/* Deny merge if bio and rq don't belong to same cfq group */
-	if ((RQ_CFQQ(rq))->cfqg != cfq_get_cfqg(cfqd, 0))
-		return false;
 	/*
 	 * Disallow merge of a sync bio into an async request.
 	 */
@@ -1616,7 +1608,7 @@ static struct cfq_queue *cfq_get_next_queue(struct cfq_data *cfqd)
 {
 	struct cfq_rb_root *service_tree =
 		service_tree_for(cfqd->serving_group, cfqd->serving_prio,
-					cfqd->serving_type, cfqd);
+					cfqd->serving_type);
 
 	if (!cfqd->rq_queued)
 		return NULL;
@@ -1675,13 +1667,17 @@ static inline sector_t cfq_dist_from_last(struct cfq_data *cfqd,
 #define CFQQ_SEEKY(cfqq)	((cfqq)->seek_mean > CFQQ_SEEK_THR)
 
 static inline int cfq_rq_close(struct cfq_data *cfqd, struct cfq_queue *cfqq,
-			       struct request *rq)
+			       struct request *rq, bool for_preempt)
 {
 	sector_t sdist = cfqq->seek_mean;
 
 	if (!sample_valid(cfqq->seek_samples))
 		sdist = CFQQ_SEEK_THR;
 
+	/* if seek_mean is big, using it as close criteria is meaningless */
+	if (sdist > CFQQ_SEEK_THR && !for_preempt)
+		sdist = CFQQ_SEEK_THR;
+
 	return cfq_dist_from_last(cfqd, rq) <= sdist;
 }
 
@@ -1709,7 +1705,7 @@ static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
 	 * will contain the closest sector.
 	 */
 	__cfqq = rb_entry(parent, struct cfq_queue, p_node);
-	if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq))
+	if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq, false))
 		return __cfqq;
 
 	if (blk_rq_pos(__cfqq->next_rq) < sector)
@@ -1720,7 +1716,7 @@ static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
 		return NULL;
 
 	__cfqq = rb_entry(node, struct cfq_queue, p_node);
-	if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq))
+	if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq, false))
 		return __cfqq;
 
 	return NULL;
@@ -1963,8 +1959,7 @@ static void cfq_setup_merge(struct cfq_queue *cfqq, struct cfq_queue *new_cfqq)
 }
 
 static enum wl_type_t cfq_choose_wl(struct cfq_data *cfqd,
-				struct cfq_group *cfqg, enum wl_prio_t prio,
-				bool prio_changed)
+				struct cfq_group *cfqg, enum wl_prio_t prio)
 {
 	struct cfq_queue *queue;
 	int i;
@@ -1972,24 +1967,9 @@ static enum wl_type_t cfq_choose_wl(struct cfq_data *cfqd,
 	unsigned long lowest_key = 0;
 	enum wl_type_t cur_best = SYNC_NOIDLE_WORKLOAD;
 
-	if (prio_changed) {
-		/*
-		 * When priorities switched, we prefer starting
-		 * from SYNC_NOIDLE (first choice), or just SYNC
-		 * over ASYNC
-		 */
-		if (service_tree_for(cfqg, prio, cur_best, cfqd)->count)
-			return cur_best;
-		cur_best = SYNC_WORKLOAD;
-		if (service_tree_for(cfqg, prio, cur_best, cfqd)->count)
-			return cur_best;
-
-		return ASYNC_WORKLOAD;
-	}
-
-	for (i = 0; i < 3; ++i) {
-		/* otherwise, select the one with lowest rb_key */
-		queue = cfq_rb_first(service_tree_for(cfqg, prio, i, cfqd));
+	for (i = 0; i <= SYNC_WORKLOAD; ++i) {
+		/* select the one with lowest rb_key */
+		queue = cfq_rb_first(service_tree_for(cfqg, prio, i));
 		if (queue &&
 		    (!key_valid || time_before(queue->rb_key, lowest_key))) {
 			lowest_key = queue->rb_key;
@@ -2003,8 +1983,6 @@ static enum wl_type_t cfq_choose_wl(struct cfq_data *cfqd,
 
 static void choose_service_tree(struct cfq_data *cfqd, struct cfq_group *cfqg)
 {
-	enum wl_prio_t previous_prio = cfqd->serving_prio;
-	bool prio_changed;
 	unsigned slice;
 	unsigned count;
 	struct cfq_rb_root *st;
@@ -2032,24 +2010,19 @@ static void choose_service_tree(struct cfq_data *cfqd, struct cfq_group *cfqg)
 	 * (SYNC, SYNC_NOIDLE, ASYNC), and to compute a workload
 	 * expiration time
 	 */
-	prio_changed = (cfqd->serving_prio != previous_prio);
-	st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type,
-				cfqd);
+	st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type);
 	count = st->count;
 
 	/*
-	 * If priority didn't change, check workload expiration,
-	 * and that we still have other queues ready
+	 * check workload expiration, and that we still have other queues ready
 	 */
-	if (!prio_changed && count &&
-	    !time_after(jiffies, cfqd->workload_expires))
+	if (count && !time_after(jiffies, cfqd->workload_expires))
 		return;
 
 	/* otherwise select new workload type */
 	cfqd->serving_type =
-		cfq_choose_wl(cfqd, cfqg, cfqd->serving_prio, prio_changed);
-	st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type,
-				cfqd);
+		cfq_choose_wl(cfqd, cfqg, cfqd->serving_prio);
+	st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type);
 	count = st->count;
 
 	/*
@@ -3143,7 +3116,7 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq,
 	 * if this request is as-good as one we would expect from the
 	 * current cfqq, let it preempt
 	 */
-	if (cfq_rq_close(cfqd, cfqq, rq))
+	if (cfq_rq_close(cfqd, cfqq, rq, true))
 		return true;
 
 	return false;

drivers/block/DAC960.c

@@ -7101,7 +7101,7 @@ static struct DAC960_privdata DAC960_BA_privdata = {
 
 static struct DAC960_privdata DAC960_LP_privdata = {
 	.HardwareType =		DAC960_LP_Controller,
-	.FirmwareType 	=	DAC960_LP_Controller,
+	.FirmwareType 	=	DAC960_V2_Controller,
 	.InterruptHandler =	DAC960_LP_InterruptHandler,
 	.MemoryWindowSize =	DAC960_LP_RegisterWindowSize,
 };

drivers/block/aoe/aoecmd.c

@@ -735,21 +735,6 @@ diskstats(struct gendisk *disk, struct bio *bio, ulong duration, sector_t sector
 	part_stat_unlock();
 }
 
-/*
- * Ensure we don't create aliases in VI caches
- */
-static inline void
-killalias(struct bio *bio)
-{
-	struct bio_vec *bv;
-	int i;
-
-	if (bio_data_dir(bio) == READ)
-		__bio_for_each_segment(bv, bio, i, 0) {
-			flush_dcache_page(bv->bv_page);
-		}
-}
-
 void
 aoecmd_ata_rsp(struct sk_buff *skb)
 {
@@ -871,7 +856,7 @@ aoecmd_ata_rsp(struct sk_buff *skb)
 		if (buf->flags & BUFFL_FAIL)
 			bio_endio(buf->bio, -EIO);
 		else {
-			killalias(buf->bio);
+			bio_flush_dcache_pages(buf->bio);
 			bio_endio(buf->bio, 0);
 		}
 		mempool_free(buf, d->bufpool);

drivers/block/drbd/drbd_int.h

@@ -1490,7 +1490,7 @@ void drbd_bump_write_ordering(struct drbd_conf *mdev, enum write_ordering_e wo);
 
 /* drbd_proc.c */
 extern struct proc_dir_entry *drbd_proc;
-extern struct file_operations drbd_proc_fops;
+extern const struct file_operations drbd_proc_fops;
 extern const char *drbd_conn_str(enum drbd_conns s);
 extern const char *drbd_role_str(enum drbd_role s);
 

drivers/block/drbd/drbd_main.c

@@ -27,7 +27,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/drbd.h>
 #include <asm/uaccess.h>
 #include <asm/types.h>
@@ -151,7 +150,7 @@ wait_queue_head_t drbd_pp_wait;
 
 DEFINE_RATELIMIT_STATE(drbd_ratelimit_state, 5 * HZ, 5);
 
-static struct block_device_operations drbd_ops = {
+static const struct block_device_operations drbd_ops = {
 	.owner =   THIS_MODULE,
 	.open =    drbd_open,
 	.release = drbd_release,
@@ -3623,7 +3622,7 @@ _drbd_fault_random(struct fault_random_state *rsp)
 {
 	long refresh;
 
-	if (--rsp->count < 0) {
+	if (!rsp->count--) {
 		get_random_bytes(&refresh, sizeof(refresh));
 		rsp->state += refresh;
 		rsp->count = FAULT_RANDOM_REFRESH;

drivers/block/drbd/drbd_proc.c

@@ -38,7 +38,7 @@ static int drbd_proc_open(struct inode *inode, struct file *file);
 
 
 struct proc_dir_entry *drbd_proc;
-struct file_operations drbd_proc_fops = {
+const struct file_operations drbd_proc_fops = {
 	.owner		= THIS_MODULE,
 	.open		= drbd_proc_open,
 	.read		= seq_read,

drivers/block/drbd/drbd_receiver.c

@@ -28,7 +28,6 @@
 #include <asm/uaccess.h>
 #include <net/sock.h>
 
-#include <linux/version.h>
 #include <linux/drbd.h>
 #include <linux/fs.h>
 #include <linux/file.h>

drivers/block/drbd/drbd_worker.c

@@ -24,7 +24,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/drbd.h>
 #include <linux/sched.h>
 #include <linux/smp_lock.h>
@@ -34,7 +33,6 @@
 #include <linux/mm_inline.h>
 #include <linux/slab.h>
 #include <linux/random.h>
-#include <linux/mm.h>
 #include <linux/string.h>
 #include <linux/scatterlist.h>
 

drivers/block/mg_disk.c

@@ -860,7 +860,7 @@ static int mg_probe(struct platform_device *plat_dev)
 		err = -EINVAL;
 		goto probe_err_2;
 	}
-	host->dev_base = ioremap(rsc->start , rsc->end + 1);
+	host->dev_base = ioremap(rsc->start, resource_size(rsc));
 	if (!host->dev_base) {
 		printk(KERN_ERR "%s:%d ioremap fail\n",
 				__func__, __LINE__);

include/linux/blkdev.h

@@ -845,7 +845,6 @@ static inline struct request_queue *bdev_get_queue(struct block_device *bdev)
  * blk_rq_err_bytes()		: bytes left till the next error boundary
  * blk_rq_sectors()		: sectors left in the entire request
  * blk_rq_cur_sectors()		: sectors left in the current segment
- * blk_rq_err_sectors()		: sectors left till the next error boundary
  */
 static inline sector_t blk_rq_pos(const struct request *rq)
 {
@@ -874,11 +873,6 @@ static inline unsigned int blk_rq_cur_sectors(const struct request *rq)
 	return blk_rq_cur_bytes(rq) >> 9;
 }
 
-static inline unsigned int blk_rq_err_sectors(const struct request *rq)
-{
-	return blk_rq_err_bytes(rq) >> 9;
-}
-
 /*
  * Request issue related functions.
  */
@@ -1116,11 +1110,18 @@ static inline int queue_alignment_offset(struct request_queue *q)
 	return q->limits.alignment_offset;
 }
 
+static inline int queue_limit_alignment_offset(struct queue_limits *lim, sector_t offset)
+{
+	unsigned int granularity = max(lim->physical_block_size, lim->io_min);
+
+	offset &= granularity - 1;
+	return (granularity + lim->alignment_offset - offset) & (granularity - 1);
+}
+
 static inline int queue_sector_alignment_offset(struct request_queue *q,
 						sector_t sector)
 {
-	return ((sector << 9) - q->limits.alignment_offset)
-		& (q->limits.io_min - 1);
+	return queue_limit_alignment_offset(&q->limits, sector << 9);
 }
 
 static inline int bdev_alignment_offset(struct block_device *bdev)