Merge tag 'samsung-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v5.7

1. Various fixes:
 - Reboot of some Odroid Exynos4412-based boards,
 - MMC regulators on Arndale5250,
 - Memory mapping on Artik5,
 - GPU power domain on Exynos542x boards,
 - LCD SPI polarity on UniversalC210,
2. Add thermal cooling of GPU on Odroid XU3/XU4 family,
3. Add dynamic-power-coefficient to Exynos5422 for energy model.

* tag 'samsung-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Fix polarity of the LCD SPI bus on UniversalC210 board
  ARM: dts: exynos: Fix G3D power domain supply on Arndale Octa boards
  ARM: dts: exynos: Fix G3D power domain supply on Odroid XU3/XU4/HC1 boards
  ARM: dts: exynos: Fix memory on Artik5 evaluation boards
  ARM: dts: exynos: Make fixed regulators always-on on Arndale5250
  ARM: dts: exynos: Fix MMC regulator on Arndale5250 board
  ARM: dts: exynos: Add dynamic-power-coefficient to Exynos5422 CPUs
  ARM: dts: exynos: Add GPU thermal zone cooling maps for Odroid XU3/XU4/HC1
  ARM: dts: exynos: Fix broken reboot on some Odroid U2/X2/U3 boards

Link: https://lore.kernel.org/r/20200316175652.5604-3-krzk@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/exynos3250-artik5.dtsi

@@ -23,7 +23,7 @@ chosen {
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x1ff00000>;
+		reg = <0x40000000 0x1f800000>;
 	};
 
 	firmware@205f000 {

arch/arm/boot/dts/exynos4210-universal_c210.dts

@@ -115,7 +115,7 @@ spi-lcd {
 		gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>;
 		gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
-		cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
 
 		lcd@0 {
 			compatible = "samsung,ld9040";
@@ -124,8 +124,6 @@ lcd@0 {
 			vci-supply = <&ldo17_reg>;
 			reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
 			spi-max-frequency = <1200000>;
-			spi-cpol;
-			spi-cpha;
 			power-on-delay = <10>;
 			reset-delay = <10>;
 			panel-width-mm = <90>;

arch/arm/boot/dts/exynos4412-odroid-common.dtsi

@@ -165,6 +165,15 @@ &cpu0 {
 	cpu0-supply = <&buck2_reg>;
 };
 
+&cpu0_opp_table {
+	opp-1000000000 {
+		opp-suspend;
+	};
+	opp-800000000 {
+		/delete-property/opp-suspend;
+	};
+};
+
 &pinctrl_1 {
 	gpio_power_key: power_key {
 		samsung,pins = "gpx1-3";

arch/arm/boot/dts/exynos5250-arndale.dts

@@ -93,22 +93,23 @@ main_dc_reg: regulator@0 {
 			compatible = "regulator-fixed";
 			reg = <0>;
 			regulator-name = "MAIN_DC";
+			regulator-always-on;
 		};
 
 		mmc_reg: regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
-			regulator-name = "VDD_33ON_2.8V";
+			regulator-name = "VDD_MMC";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+			regulator-always-on;
 		};
 
 		reg_hdmi_en: regulator@2 {
 			compatible = "regulator-fixed";
 			reg = <2>;
 			regulator-name = "hdmi-en";
+			regulator-always-on;
 		};
 
 		vcc_1v2_reg: regulator@3 {
@@ -117,6 +118,7 @@ vcc_1v2_reg: regulator@3 {
 			regulator-name = "VCC_1V2";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
 		};
 
 		vcc_1v8_reg: regulator@4 {
@@ -125,6 +127,7 @@ vcc_1v8_reg: regulator@4 {
 			regulator-name = "VCC_1V8";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
 		};
 
 		vcc_3v3_reg: regulator@5 {
@@ -133,6 +136,7 @@ vcc_3v3_reg: regulator@5 {
 			regulator-name = "VCC_3V3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
 		};
 	};
 

arch/arm/boot/dts/exynos5420-arndale-octa.dts

@@ -584,6 +584,7 @@ ldo27_reg: LDO27 {
 				regulator-name = "PVDD_G3DS_1V0";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
 
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -697,6 +698,7 @@ buck4_reg: BUCK4 {
 				regulator-name = "PVDD_G3D_1V0";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
 
 				regulator-state-mem {
 					regulator-off-in-suspend;

arch/arm/boot/dts/exynos5422-cpus.dtsi

@@ -31,6 +31,7 @@ cpu0: cpu@100 {
 			operating-points-v2 = <&cluster_a7_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
 		};
 
 		cpu1: cpu@101 {
@@ -43,6 +44,7 @@ cpu1: cpu@101 {
 			operating-points-v2 = <&cluster_a7_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
 		};
 
 		cpu2: cpu@102 {
@@ -55,6 +57,7 @@ cpu2: cpu@102 {
 			operating-points-v2 = <&cluster_a7_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
 		};
 
 		cpu3: cpu@103 {
@@ -67,6 +70,7 @@ cpu3: cpu@103 {
 			operating-points-v2 = <&cluster_a7_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
 		};
 
 		cpu4: cpu@0 {
@@ -79,6 +83,7 @@ cpu4: cpu@0 {
 			operating-points-v2 = <&cluster_a15_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
 		};
 
 		cpu5: cpu@1 {
@@ -91,6 +96,7 @@ cpu5: cpu@1 {
 			operating-points-v2 = <&cluster_a15_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
 		};
 
 		cpu6: cpu@2 {
@@ -103,6 +109,7 @@ cpu6: cpu@2 {
 			operating-points-v2 = <&cluster_a15_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
 		};
 
 		cpu7: cpu@3 {
@@ -115,6 +122,7 @@ cpu7: cpu@3 {
 			operating-points-v2 = <&cluster_a15_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
 		};
 	};
 };

arch/arm/boot/dts/exynos5422-odroid-core.dtsi

@@ -901,6 +901,7 @@ buck4_reg: BUCK4 {
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1400000>;
 				regulator-boot-on;
+				regulator-always-on;
 
 				regulator-state-mem {
 					regulator-off-in-suspend;

arch/arm/boot/dts/exynos5422-odroidhc1.dts

@@ -215,6 +215,36 @@ map1 {
 				};
 			};
 		};
+		gpu_thermal: gpu-thermal {
+			thermal-sensors = <&tmu_gpu 0>;
+			trips {
+				gpu_alert0: gpu-alert-0 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				gpu_alert1: gpu-alert-1 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				gpu_crit0: gpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu 0 2>;
+				};
+				map1 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&gpu 3 6>;
+				};
+			};
+		};
 	};
 
 };

arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi

@@ -357,6 +357,65 @@ cpu3_cooling_map4: map4 {
 				};
 			};
 		};
+		gpu_thermal: gpu-thermal {
+			thermal-sensors = <&tmu_gpu 0>;
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			trips {
+				gpu_alert0: gpu-alert-0 {
+					temperature = <50000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_alert1: gpu-alert-1 {
+					temperature = <60000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_alert2: gpu-alert-2 {
+					temperature = <70000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_crit0: gpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				gpu_alert3: gpu-alert-3 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+				gpu_alert4: gpu-alert-4 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&gpu_alert2>;
+					cooling-device = <&fan0 2 3>;
+				};
+				map3 {
+					trip = <&gpu_alert3>;
+					cooling-device = <&gpu 0 2>;
+				};
+				map4 {
+					trip = <&gpu_alert4>;
+					cooling-device = <&gpu 3 6>;
+				};
+			};
+		};
 	};
 };