ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

We want to remove plat/cpu.h. To do this, let's first split
it to private soc.h to mach-omap1 and mach-omap2. We have to
keep plat/cpu.h around until the remaining drivers are fixed,
so let's include the local soc.h in plat/cpu.h and for drivers
still including plat/cpu.h.

Once the drivers are fixed not to include plat/cpu.h, we
can remove the file.

This is needed for the ARM common zImage support.

[tony@atomide.com: updated to not print a warning]
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/clock.c

@@ -22,7 +22,7 @@
 
 #include <asm/mach-types.h>
 
-#include <plat/cpu.h>
+#include "soc.h"
 #include <plat/usb.h>
 
 #include <mach/hardware.h>

arch/arm/mach-omap1/clock_data.c

@@ -22,7 +22,7 @@
 
 #include <asm/mach-types.h>  /* for machine_is_* */
 
-#include <plat/cpu.h>
+#include "soc.h"
 
 #include <mach/hardware.h>
 #include <mach/usb.h>   /* for OTG_BASE */

arch/arm/mach-omap1/i2c.c

@@ -21,7 +21,7 @@
 
 #include <linux/i2c-omap.h>
 #include <mach/mux.h>
-#include <plat/cpu.h>
+#include "soc.h"
 
 #include "../plat-omap/i2c.h"
 

arch/arm/mach-omap1/id.c

@@ -17,7 +17,7 @@
 #include <linux/io.h>
 #include <asm/system_info.h>
 
-#include <plat/cpu.h>
+#include "soc.h"
 
 #include <mach/hardware.h>
 

arch/arm/mach-omap1/include/mach/hardware.h

@@ -39,7 +39,7 @@
 #include <asm/sizes.h>
 #ifndef __ASSEMBLER__
 #include <asm/types.h>
-#include <plat/cpu.h>
+#include "../../mach-omap1/soc.h"
 
 /*
  * NOTE: Please use ioremap + __raw_read/write where possible instead of these

arch/arm/mach-omap1/include/mach/memory.h

@@ -19,7 +19,7 @@
  * because of the strncmp().
  */
 #if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
-#include <plat/cpu.h>
+#include "../../mach-omap1/soc.h"
 
 /*
  * OMAP-1510 Local Bus address offset

arch/arm/mach-omap1/irq.c

@@ -45,7 +45,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <plat/cpu.h>
+#include "soc.h"
 
 #include <mach/hardware.h>
 

arch/arm/mach-omap1/mcbsp.c

@@ -21,7 +21,7 @@
 
 #include <plat-omap/dma-omap.h>
 #include <mach/mux.h>
-#include <plat/cpu.h>
+#include "soc.h"
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 
 #include <mach/irqs.h>

arch/arm/mach-omap1/soc.h

+/*
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009-11 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap850
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap16xx
+# endif
+#endif
+
+/*
+ * omap_rev bits:
+ * CPU id bits	(0730, 1510, 1710, 2422...)	[31:16]
+ * CPU revision	(See _REV_ defined in cpu.h)	[15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
+ */
+unsigned int omap_rev(void);
+
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION()	((omap_rev() >> 8) & 0xff)
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx():	True for OMAP730, OMAP850
+ * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
+ * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
+ */
+#define GET_OMAP_CLASS	(omap_rev() & 0xff)
+
+#define IS_OMAP_CLASS(class, id)			\
+static inline int is_omap ##class (void)		\
+{							\
+	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
+}
+
+#define GET_OMAP_SUBCLASS	((omap_rev() >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id)			\
+static inline int is_omap ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+
+#define cpu_is_omap7xx()		0
+#define cpu_is_omap15xx()		0
+#define cpu_is_omap16xx()		0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap310():	True for OMAP310
+ * cpu_is_omap1510():	True for OMAP1510
+ * cpu_is_omap1610():	True for OMAP1610
+ * cpu_is_omap1611():	True for OMAP1611
+ * cpu_is_omap5912():	True for OMAP5912
+ * cpu_is_omap1621():	True for OMAP1621
+ * cpu_is_omap1710():	True for OMAP1710
+ */
+#define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id)				\
+static inline int is_omap ##type (void)			\
+{							\
+	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
+}
+
+IS_OMAP_TYPE(310, 0x0310)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+
+#define cpu_is_omap310()		0
+#define cpu_is_omap1510()		0
+#define cpu_is_omap1610()		0
+#define cpu_is_omap5912()		0
+#define cpu_is_omap1611()		0
+#define cpu_is_omap1621()		0
+#define cpu_is_omap1710()		0
+
+/* These are needed to compile common code */
+#ifdef CONFIG_ARCH_OMAP1
+#define cpu_is_omap242x()		0
+#define cpu_is_omap2430()		0
+#define cpu_is_omap243x()		0
+#define cpu_is_omap24xx()		0
+#define cpu_is_omap34xx()		0
+#define cpu_is_omap44xx()		0
+#define soc_is_omap54xx()		0
+#define soc_is_am33xx()			0
+#define cpu_class_is_omap1()		1
+#define cpu_class_is_omap2()		0
+#endif
+
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 310 vs. 1510 and 1611B/5912 vs. 1710.
+ */
+
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef  cpu_is_omap310
+# undef  cpu_is_omap1510
+# define cpu_is_omap310()		is_omap310()
+# define cpu_is_omap1510()		is_omap1510()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef  cpu_is_omap1610
+# undef  cpu_is_omap1611
+# undef  cpu_is_omap5912
+# undef  cpu_is_omap1621
+# undef  cpu_is_omap1710
+# define cpu_is_omap1610()		is_omap1610()
+# define cpu_is_omap1611()		is_omap1611()
+# define cpu_is_omap5912()		is_omap5912()
+# define cpu_is_omap1621()		is_omap1621()
+# define cpu_is_omap1710()		is_omap1710()
+#endif
+
+#endif	/* __ASSEMBLY__ */
+#endif

arch/arm/mach-omap2/board-3430sdp.c

@@ -39,6 +39,7 @@
 #include "gpmc.h"
 #include "gpmc-smc91x.h"
 
+#include "soc.h"
 #include "board-flash.h"
 #include "mux.h"
 #include "sdram-qimonda-hyb18m512160af-6.h"

arch/arm/mach-omap2/board-flash.c

@@ -17,11 +17,10 @@
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
 
-#include <plat/cpu.h>
-#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
 
+#include "soc.h"
 #include "common.h"
 #include "board-flash.h"
 #include "gpmc-onenand.h"

arch/arm/mach-omap2/board-omap3beagle.c

@@ -46,6 +46,7 @@
 #include <plat/usb.h>
 #include "omap_device.h"
 
+#include "soc.h"
 #include "mux.h"
 #include "hsmmc.h"
 #include "pm.h"

arch/arm/mach-omap2/board-omap3evm.c

@@ -52,6 +52,7 @@
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
 
+#include "soc.h"
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"

arch/arm/mach-omap2/board-zoom-display.c

@@ -18,6 +18,7 @@
 #include <video/omapdss.h>
 #include "board-zoom.h"
 
+#include "soc.h"
 #include "common.h"
 
 #define LCD_PANEL_RESET_GPIO_PROD	96

arch/arm/mach-omap2/clock33xx_data.c

@@ -18,7 +18,7 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 
-#include "am33xx.h"
+#include "soc.h"
 #include "iomap.h"
 #include "control.h"
 #include "clock.h"

arch/arm/mach-omap2/clockdomain.c

@@ -27,6 +27,7 @@
 
 #include <linux/bitops.h>
 
+#include "soc.h"
 #include "clock.h"
 #include "clockdomain.h"
 

arch/arm/mach-omap2/clockdomain.h

@@ -20,7 +20,6 @@
 #include "powerdomain.h"
 #include "clock.h"
 #include "omap_hwmod.h"
-#include <plat/cpu.h>
 
 /*
  * Clockdomain flags

arch/arm/mach-omap2/clockdomain2xxx_3xxx.c

@@ -14,6 +14,8 @@
 
 #include <linux/types.h>
 #include <plat/prcm.h>
+
+#include "soc.h"
 #include "prm.h"
 #include "prm2xxx_3xxx.h"
 #include "cm.h"

arch/arm/mach-omap2/clockdomains2420_data.c

@@ -35,6 +35,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
+#include "soc.h"
 #include "clockdomain.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"

arch/arm/mach-omap2/clockdomains2430_data.c

@@ -35,6 +35,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
+#include "soc.h"
 #include "clockdomain.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"

arch/arm/mach-omap2/clockdomains3xxx_data.c

@@ -33,6 +33,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
+#include "soc.h"
 #include "clockdomain.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"

arch/arm/mach-omap2/common.h

@@ -34,7 +34,6 @@
 
 #include <asm/proc-fns.h>
 
-#include <plat/cpu.h>
 #include <plat/serial.h>
 
 #include "../plat-omap/common.h"

arch/arm/mach-omap2/display.c

@@ -30,6 +30,7 @@
 #include "omap-pm.h"
 #include "common.h"
 
+#include "soc.h"
 #include "iomap.h"
 #include "mux.h"
 #include "control.h"

arch/arm/mach-omap2/dma.c

@@ -30,6 +30,7 @@
 
 #include <plat-omap/dma-omap.h>
 
+#include "soc.h"
 #include "omap_hwmod.h"
 #include "omap_device.h"
 

arch/arm/mach-omap2/gpmc.c

@@ -30,8 +30,6 @@
 
 #include <asm/mach-types.h>
 
-#include <plat/cpu.h>
-
 #include "soc.h"
 #include "common.h"
 #include "omap_device.h"

arch/arm/mach-omap2/hsmmc.c

@@ -17,6 +17,7 @@
 #include <mach/hardware.h>
 #include <linux/platform_data/gpio-omap.h>
 
+#include "soc.h"
 #include "omap_device.h"
 #include "omap-pm.h"
 

arch/arm/mach-omap2/i2c.c

@@ -19,6 +19,7 @@
  *
  */
 
+#include "soc.h"
 #include "common.h"
 #include "omap_hwmod.h"
 #include "omap_device.h"

arch/arm/mach-omap2/mux.c

@@ -38,6 +38,7 @@
 
 #include "omap_hwmod.h"
 
+#include "soc.h"
 #include "control.h"
 #include "mux.h"
 #include "prm.h"

arch/arm/mach-omap2/omap-mpuss-lowpower.c

@@ -50,6 +50,7 @@
 #include <asm/suspend.h>
 #include <asm/hardware/cache-l2x0.h>
 
+#include "soc.h"
 #include "common.h"
 #include "omap44xx.h"
 #include "omap4-sar-layout.h"

arch/arm/mach-omap2/omap_hwmod.h

@@ -35,7 +35,6 @@
 #include <linux/list.h>
 #include <linux/ioport.h>
 #include <linux/spinlock.h>
-#include <plat/cpu.h>
 
 struct omap_device;
 

arch/arm/mach-omap2/omap_hwmod_33xx_data.c

@@ -17,7 +17,6 @@
 #include <linux/i2c-omap.h>
 
 #include "omap_hwmod.h"
-#include <plat/cpu.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 

arch/arm/mach-omap2/omap_twl.c

@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/i2c/twl.h>
 
+#include "soc.h"
 #include "voltage.h"
 
 #include "pm.h"

arch/arm/mach-omap2/opp3xxx_data.c

@@ -19,6 +19,7 @@
  */
 #include <linux/module.h>
 
+#include "soc.h"
 #include "control.h"
 #include "omap_opp_data.h"
 #include "pm.h"

arch/arm/mach-omap2/pm-debug.c

@@ -33,6 +33,7 @@
 #include <plat/dmtimer.h>
 #include "omap-pm.h"
 
+#include "soc.h"
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
 #include "pm.h"

arch/arm/mach-omap2/pm.c

@@ -24,6 +24,7 @@
 #include "omap_device.h"
 #include "common.h"
 
+#include "soc.h"
 #include "prcm-common.h"
 #include "voltage.h"
 #include "powerdomain.h"

arch/arm/mach-omap2/pm24xx.c

@@ -40,6 +40,7 @@
 
 #include "../plat-omap/sram.h"
 
+#include "soc.h"
 #include "common.h"
 #include "clock.h"
 #include "prm2xxx_3xxx.h"

arch/arm/mach-omap2/pm34xx.c

@@ -42,6 +42,7 @@
 
 #include "../plat-omap/sram.h"
 
+#include "soc.h"
 #include "common.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"

arch/arm/mach-omap2/pm44xx.c

@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 #include <asm/system_misc.h>
 
+#include "soc.h"
 #include "common.h"
 #include "clockdomain.h"
 #include "powerdomain.h"

arch/arm/mach-omap2/pmu.c

@@ -15,6 +15,7 @@
 
 #include <asm/pmu.h>
 
+#include "soc.h"
 #include "omap_hwmod.h"
 #include "omap_device.h"
 

arch/arm/mach-omap2/powerdomain.h

@@ -22,8 +22,6 @@
 
 #include <linux/atomic.h>
 
-#include <plat/cpu.h>
-
 #include "voltage.h"
 
 /* Powerdomain basic power states */

arch/arm/mach-omap2/powerdomains2xxx_data.c

@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
+#include "soc.h"
 #include "powerdomain.h"
 #include "powerdomains2xxx_3xxx_data.h"
 

arch/arm/mach-omap2/prcm.c

@@ -28,6 +28,7 @@
 #include "common.h"
 #include <plat/prcm.h>
 
+#include "soc.h"
 #include "clock.h"
 #include "clock2xxx.h"
 #include "cm2xxx_3xxx.h"

arch/arm/mach-omap2/serial.c

@@ -35,6 +35,7 @@
 #include "omap_hwmod.h"
 #include "omap_device.h"
 #include "omap-pm.h"
+#include "soc.h"
 #include "prm2xxx_3xxx.h"
 #include "pm.h"
 #include "cm2xxx_3xxx.h"

arch/arm/mach-omap2/sr_device.c

@@ -23,8 +23,8 @@
 #include <linux/slab.h>
 #include <linux/io.h>
 
+#include "soc.h"
 #include "omap_device.h"
-
 #include "voltage.h"
 #include "control.h"
 #include "pm.h"

arch/arm/mach-omap2/usb-host.c

@@ -26,6 +26,7 @@
 #include <asm/io.h>
 
 #include <plat/usb.h>
+#include "soc.h"
 #include "omap_device.h"
 
 #include "mux.h"

arch/arm/mach-omap2/usb-musb.c

@@ -28,8 +28,7 @@
 #include <plat/usb.h>
 #include "omap_device.h"
 
-#include "am35xx.h"
-
+#include "soc.h"
 #include "mux.h"
 
 static struct musb_hdrc_config musb_config = {

arch/arm/plat-omap/dma.c

@@ -36,9 +36,11 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 
-#include <plat/cpu.h>
 #include <plat-omap/dma-omap.h>
 
+#include "../mach-omap1/soc.h"
+#include "../mach-omap2/soc.h"
+
 /*
  * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
  * channels that an instance of the SDMA IP block can support.  Used

arch/arm/plat-omap/i2c.c

@@ -32,7 +32,9 @@
 #include <linux/clk.h>
 
 #include <mach/irqs.h>
-#include <plat/cpu.h>
+
+#include "../mach-omap1/soc.h"
+#include "../mach-omap2/soc.h"
 
 #include "i2c.h"
 

arch/arm/plat-omap/sram.c

@@ -25,7 +25,8 @@
 
 #include <asm/mach/map.h>
 
-#include <plat/cpu.h>
+#include "../mach-omap1/soc.h"
+#include "../mach-omap2/soc.h"
 
 #include "sram.h"