Commit e520a36d authored by Milan Svoboda's avatar Milan Svoboda Committed by Russell King

[ARM] 3958/1: add platform device (pxa2xx-udc)to ixp4xx

Create include/asm-arm/arch-ixp4xx/udc.h and
add platfrom device ixp4xx_udc_device into
arch/arm/mach-ixp4xx/common.c.

This allows us to use pxa2xx-udc on
the ixp4xx platfrom. Both pxa2xx and
ixp4xx use the same device controller.
Signed-off-by: default avatarMilan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 2024c39d
......@@ -28,6 +28,7 @@
#include <linux/timex.h>
#include <linux/clocksource.h>
#include <asm/arch/udc.h>
#include <asm/hardware.h>
#include <asm/uaccess.h>
#include <asm/io.h>
......@@ -286,6 +287,44 @@ struct sys_timer ixp4xx_timer = {
.init = ixp4xx_timer_init,
};
static struct pxa2xx_udc_mach_info ixp4xx_udc_info;
void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info)
{
memcpy(&ixp4xx_udc_info, info, sizeof *info);
}
static struct resource ixp4xx_udc_resources[] = {
[0] = {
.start = 0xc800b000,
.end = 0xc800bfff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_IXP4XX_USB,
.end = IRQ_IXP4XX_USB,
.flags = IORESOURCE_IRQ,
},
};
/*
* USB device controller. The IXP4xx uses the same controller as PXA2XX,
* so we just use the same device.
*/
static struct platform_device ixp4xx_udc_device = {
.name = "pxa2xx-udc",
.id = -1,
.num_resources = 2,
.resource = ixp4xx_udc_resources,
.dev = {
.platform_data = &ixp4xx_udc_info,
},
};
static struct platform_device *ixp4xx_devices[] __initdata = {
&ixp4xx_udc_device,
};
static struct resource ixp46x_i2c_resources[] = {
[0] = {
.start = 0xc8011000,
......@@ -321,6 +360,8 @@ void __init ixp4xx_sys_init(void)
{
ixp4xx_exp_bus_size = SZ_16M;
platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
if (cpu_is_ixp46x()) {
int region;
......
/*
* linux/include/asm-arm/arch-ixp4xx/udc.h
*
*/
#include <asm/mach/udc_pxa2xx.h>
extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment