blackfin: add spi/sport3/ppi head file for bf60x

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

arch/blackfin/include/asm/bfin_ppi.h

@@ -10,6 +10,7 @@
 #define __ASM_BFIN_PPI_H__
 
 #include <linux/types.h>
+#include <asm/blackfin.h>
 
 /*
  * All Blackfin system MMRs are padded to 32bits even if the register
@@ -48,6 +49,133 @@ struct bfin_eppi_regs {
 	u32 clip;
 };
 
+/*
+ * bfin eppi3 registers layout
+ */
+struct bfin_eppi3_regs {
+	u32 stat;
+	u32 hcnt;
+	u32 hdly;
+	u32 vcnt;
+	u32 vdly;
+	u32 frame;
+	u32 line;
+	u32 clkdiv;
+	u32 ctl;
+	u32 fs1_wlhb;
+	u32 fs1_paspl;
+	u32 fs2_wlvb;
+	u32 fs2_palpf;
+	u32 imsk;
+	u32 oddclip;
+	u32 evenclip;
+	u32 fs1_dly;
+	u32 fs2_dly;
+	u32 ctl2;
+};
+
 #undef __BFP
 
+#ifdef EPPI0_CTL2
+#define EPPI_STAT_CFIFOERR              0x00000001    /* Chroma FIFO Error */
+#define EPPI_STAT_YFIFOERR              0x00000002    /* Luma FIFO Error */
+#define EPPI_STAT_LTERROVR              0x00000004    /* Line Track Overflow */
+#define EPPI_STAT_LTERRUNDR             0x00000008    /* Line Track Underflow */
+#define EPPI_STAT_FTERROVR              0x00000010    /* Frame Track Overflow */
+#define EPPI_STAT_FTERRUNDR             0x00000020    /* Frame Track Underflow */
+#define EPPI_STAT_ERRNCOR               0x00000040    /* Preamble Error Not Corrected */
+#define EPPI_STAT_PXPERR                0x00000080    /* PxP Ready Error */
+#define EPPI_STAT_ERRDET                0x00004000    /* Preamble Error Detected */
+#define EPPI_STAT_FLD                   0x00008000    /* Current Field Received by EPPI */
+
+#define EPPI_HCNT_VALUE                 0x0000FFFF    /* Holds the number of samples to read in or write out per line, after PPIx_HDLY number of cycles have expired since the last assertion of PPIx_FS1 */
+
+#define EPPI_HDLY_VALUE                 0x0000FFFF    /* Number of PPIx_CLK cycles to delay after assertion of PPIx_FS1 before starting to read or write data */
+
+#define EPPI_VCNT_VALUE                 0x0000FFFF    /* Holds the number of lines to read in or write out, after PPIx_VDLY number of lines from the start of frame */
+
+#define EPPI_VDLY_VALUE                 0x0000FFFF    /* Number of lines to wait after the start of a new frame before starting to read/transmit data */
+
+#define EPPI_FRAME_VALUE                0x0000FFFF    /* Holds the number of lines expected per frame of data */
+
+#define EPPI_LINE_VALUE                 0x0000FFFF    /* Holds the number of samples expected per line */
+
+#define EPPI_CLKDIV_VALUE               0x0000FFFF    /* Internal clock divider */
+
+#define EPPI_CTL_EN                     0x00000001    /* PPI Enable */
+#define EPPI_CTL_DIR                    0x00000002    /* PPI Direction */
+#define EPPI_CTL_XFRTYPE                0x0000000C    /* PPI Operating Mode */
+#define EPPI_CTL_ACTIVE656              0x00000000    /* XFRTYPE: ITU656 Active Video Only Mode */
+#define EPPI_CTL_ENTIRE656              0x00000004    /* XFRTYPE: ITU656 Entire Field Mode */
+#define EPPI_CTL_VERT656                0x00000008    /* XFRTYPE: ITU656 Vertical Blanking Only Mode */
+#define EPPI_CTL_NON656                 0x0000000C    /* XFRTYPE: Non-ITU656 Mode (GP Mode) */
+#define EPPI_CTL_FSCFG                  0x00000030    /* Frame Sync Configuration */
+#define EPPI_CTL_SYNC0                  0x00000000    /* FSCFG: Sync Mode 0 */
+#define EPPI_CTL_SYNC1                  0x00000010    /* FSCFG: Sync Mode 1 */
+#define EPPI_CTL_SYNC2                  0x00000020    /* FSCFG: Sync Mode 2 */
+#define EPPI_CTL_SYNC3                  0x00000030    /* FSCFG: Sync Mode 3 */
+#define EPPI_CTL_FLDSEL                 0x00000040    /* Field Select/Trigger */
+#define EPPI_CTL_ITUTYPE                0x00000080    /* ITU Interlace or Progressive */
+#define EPPI_CTL_BLANKGEN               0x00000100    /* ITU Output Mode with Internal Blanking Generation */
+#define EPPI_CTL_ICLKGEN                0x00000200    /* Internal Clock Generation */
+#define EPPI_CTL_IFSGEN                 0x00000400    /* Internal Frame Sync Generation */
+#define EPPI_CTL_SIGNEXT                0x00000800    /* Sign Extension */
+#define EPPI_CTL_POLC                   0x00003000    /* Frame Sync and Data Driving and Sampling Edges */
+#define EPPI_CTL_POLC0                  0x00000000    /* POLC: Clock/Sync polarity mode 0 */
+#define EPPI_CTL_POLC1                  0x00001000    /* POLC: Clock/Sync polarity mode 1 */
+#define EPPI_CTL_POLC2                  0x00002000    /* POLC: Clock/Sync polarity mode 2 */
+#define EPPI_CTL_POLC3                  0x00003000    /* POLC: Clock/Sync polarity mode 3 */
+#define EPPI_CTL_POLS                   0x0000C000    /* Frame Sync Polarity */
+#define EPPI_CTL_FS1HI_FS2HI            0x00000000    /* POLS: FS1 and FS2 are active high */
+#define EPPI_CTL_FS1LO_FS2HI            0x00004000    /* POLS: FS1 is active low. FS2 is active high */
+#define EPPI_CTL_FS1HI_FS2LO            0x00008000    /* POLS: FS1 is active high. FS2 is active low */
+#define EPPI_CTL_FS1LO_FS2LO            0x0000C000    /* POLS: FS1 and FS2 are active low */
+#define EPPI_CTL_DLEN                   0x00070000    /* Data Length */
+#define EPPI_CTL_DLEN08                 0x00000000    /* DLEN: 8 bits */
+#define EPPI_CTL_DLEN10                 0x00010000    /* DLEN: 10 bits */
+#define EPPI_CTL_DLEN12                 0x00020000    /* DLEN: 12 bits */
+#define EPPI_CTL_DLEN14                 0x00030000    /* DLEN: 14 bits */
+#define EPPI_CTL_DLEN16                 0x00040000    /* DLEN: 16 bits */
+#define EPPI_CTL_DLEN18                 0x00050000    /* DLEN: 18 bits */
+#define EPPI_CTL_DLEN20                 0x00060000    /* DLEN: 20 bits */
+#define EPPI_CTL_DLEN24                 0x00070000    /* DLEN: 24 bits */
+#define EPPI_CTL_DMIRR                  0x00080000    /* Data Mirroring */
+#define EPPI_CTL_SKIPEN                 0x00100000    /* Skip Enable */
+#define EPPI_CTL_SKIPEO                 0x00200000    /* Skip Even or Odd */
+#define EPPI_CTL_PACKEN                 0x00400000    /* Pack/Unpack Enable */
+#define EPPI_CTL_SWAPEN                 0x00800000    /* Swap Enable */
+#define EPPI_CTL_SPLTEO                 0x01000000    /* Split Even and Odd Data Samples */
+#define EPPI_CTL_SUBSPLTODD             0x02000000    /* Sub-Split Odd Samples */
+#define EPPI_CTL_SPLTWRD                0x04000000    /* Split Word */
+#define EPPI_CTL_RGBFMTEN               0x08000000    /* RGB Formatting Enable */
+#define EPPI_CTL_DMACFG                 0x10000000    /* One or Two DMA Channels Mode */
+#define EPPI_CTL_DMAFINEN               0x20000000    /* DMA Finish Enable */
+#define EPPI_CTL_MUXSEL                 0x40000000    /* MUX Select */
+#define EPPI_CTL_CLKGATEN               0x80000000    /* Clock Gating Enable */
+
+#define EPPI_FS2_WLVB_F2VBAD            0xFF000000    /* In GP transmit mode with BLANKGEN = 1, contains number of lines of vertical blanking after field 2 */
+#define EPPI_FS2_WLVB_F2VBBD            0x00FF0000    /* In GP transmit mode with BLANKGEN = 1, contains number of lines of vertical blanking before field 2 */
+#define EPPI_FS2_WLVB_F1VBAD            0x0000FF00    /* In GP transmit mode with, BLANKGEN = 1, contains number of lines of vertical blanking after field 1 */
+#define EPPI_FS2_WLVB_F1VBBD            0x000000FF    /* In GP 2, or 3 FS modes used to generate PPIx_FS2 width (32-bit). In GP Transmit mode, with BLANKGEN=1, contains the number of lines of Vertical blanking before field 1. */
+
+#define EPPI_FS2_PALPF_F2ACT            0xFFFF0000    /* Number of lines of Active Data in Field 2 */
+#define EPPI_FS2_PALPF_F1ACT            0x0000FFFF    /* Number of lines of Active Data in Field 1 */
+
+#define EPPI_IMSK_CFIFOERR              0x00000001    /* Mask CFIFO Underflow or Overflow Error Interrupt */
+#define EPPI_IMSK_YFIFOERR              0x00000002    /* Mask YFIFO Underflow or Overflow Error Interrupt */
+#define EPPI_IMSK_LTERROVR              0x00000004    /* Mask Line Track Overflow Error Interrupt */
+#define EPPI_IMSK_LTERRUNDR             0x00000008    /* Mask Line Track Underflow Error Interrupt */
+#define EPPI_IMSK_FTERROVR              0x00000010    /* Mask Frame Track Overflow Error Interrupt */
+#define EPPI_IMSK_FTERRUNDR             0x00000020    /* Mask Frame Track Underflow Error Interrupt */
+#define EPPI_IMSK_ERRNCOR               0x00000040    /* Mask ITU Preamble Error Not Corrected Interrupt */
+#define EPPI_IMSK_PXPERR                0x00000080    /* Mask PxP Ready Error Interrupt */
+
+#define EPPI_ODDCLIP_HIGHODD            0xFFFF0000
+#define EPPI_ODDCLIP_LOWODD             0x0000FFFF
+
+#define EPPI_EVENCLIP_HIGHEVEN          0xFFFF0000
+#define EPPI_EVENCLIP_LOWEVEN           0x0000FFFF
+
+#define EPPI_CTL2_FS1FINEN              0x00000002    /* HSYNC Finish Enable */
+#endif
 #endif

arch/blackfin/include/asm/bfin_sport3.h

+/*
+ * bfin_sport - Analog Devices BF6XX SPORT registers
+ *
+ * Copyright (c) 2012 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _BFIN_SPORT3_H_
+#define _BFIN_SPORT3_H_
+
+#include <linux/types.h>
+
+#define SPORT_CTL_SPENPRI             0x00000001    /* Enable Primary Channel */
+#define SPORT_CTL_DTYPE               0x00000006    /* Data type select */
+#define SPORT_CTL_RJUSTIFY_ZFILL      0x00000000    /* DTYPE: MCM mode: Right-justify, zero-fill unused MSBs */
+#define SPORT_CTL_RJUSTIFY_SFILL      0x00000002    /* DTYPE: MCM mode: Right-justify, sign-extend unused MSBs */
+#define SPORT_CTL_USE_U_LAW           0x00000004    /* DTYPE: MCM mode: Compand using u-law */
+#define SPORT_CTL_USE_A_LAW           0x00000006    /* DTYPE: MCM mode: Compand using A-law */
+#define SPORT_CTL_LSBF                0x00000008    /* Serial bit endian select */
+#define SPORT_CTL_SLEN                0x000001F0    /* Serial Word length select */
+#define SPORT_CTL_PACK                0x00000200    /* 16-bit to 32-bit packing enable */
+#define SPORT_CTL_ICLK                0x00000400    /* Internal Clock Select */
+#define SPORT_CTL_OPMODE              0x00000800    /* Operation mode */
+#define SPORT_CTL_CKRE                0x00001000    /* Clock rising edge select */
+#define SPORT_CTL_FSR                 0x00002000    /* Frame Sync required */
+#define SPORT_CTL_IFS                 0x00004000    /* Internal Frame Sync select */
+#define SPORT_CTL_DIFS                0x00008000    /* Data-independent frame sync select */
+#define SPORT_CTL_LFS                 0x00010000    /* Active low frame sync select */
+#define SPORT_CTL_LAFS                0x00020000    /* Late Transmit frame select */
+#define SPORT_CTL_RJUST               0x00040000    /* Right Justified mode select */
+#define SPORT_CTL_FSED                0x00080000    /* External frame sync edge select */
+#define SPORT_CTL_TFIEN               0x00100000    /* Transmit finish interrrupt enable select */
+#define SPORT_CTL_GCLKEN              0x00200000    /* Gated clock mode select */
+#define SPORT_CTL_SPENSEC             0x01000000    /* Enable secondary channel */
+#define SPORT_CTL_SPTRAN              0x02000000    /* Data direction control */
+#define SPORT_CTL_DERRSEC             0x04000000    /* Secondary channel error status */
+#define SPORT_CTL_DXSSEC              0x18000000    /* Secondary channel data buffer status */
+#define SPORT_CTL_SEC_EMPTY           0x00000000    /* DXSSEC: Empty */
+#define SPORT_CTL_SEC_PART_FULL       0x10000000    /* DXSSEC: Partially full */
+#define SPORT_CTL_SEC_FULL            0x18000000    /* DXSSEC: Full */
+#define SPORT_CTL_DERRPRI             0x20000000    /* Primary channel error status */
+#define SPORT_CTL_DXSPRI              0xC0000000    /* Primary channel data buffer status */
+#define SPORT_CTL_PRM_EMPTY           0x00000000    /* DXSPRI: Empty */
+#define SPORT_CTL_PRM_PART_FULL       0x80000000    /* DXSPRI: Partially full */
+#define SPORT_CTL_PRM_FULL            0xC0000000    /* DXSPRI: Full */
+
+#define SPORT_DIV_CLKDIV              0x0000FFFF    /* Clock divisor */
+#define SPORT_DIV_FSDIV               0xFFFF0000    /* Frame sync divisor */
+
+#define SPORT_MCTL_MCE                0x00000001    /* Multichannel enable */
+#define SPORT_MCTL_MCPDE              0x00000004    /* Multichannel data packing select */
+#define SPORT_MCTL_MFD                0x000000F0    /* Multichannel frame delay */
+#define SPORT_MCTL_WSIZE              0x00007F00    /* Number of multichannel slots */
+#define SPORT_MCTL_WOFFSET            0x03FF0000    /* Window offset size */
+
+#define SPORT_CNT_CLKCNT              0x0000FFFF    /* Current state of clk div counter */
+#define SPORT_CNT_FSDIVCNT            0xFFFF0000    /* Current state of frame div counter */
+
+#define SPORT_ERR_DERRPMSK            0x00000001    /* Primary channel data error interrupt enable */
+#define SPORT_ERR_DERRSMSK            0x00000002    /* Secondary channel data error interrupt enable */
+#define SPORT_ERR_FSERRMSK            0x00000004    /* Frame sync error interrupt enable */
+#define SPORT_ERR_DERRPSTAT           0x00000010    /* Primary channel data error status */
+#define SPORT_ERR_DERRSSTAT           0x00000020    /* Secondary channel data error status */
+#define SPORT_ERR_FSERRSTAT           0x00000040    /* Frame sync error status */
+
+#define SPORT_MSTAT_CURCHAN           0x000003FF    /* Channel which is being serviced in the multichannel operation */
+
+#define SPORT_CTL2_FSMUXSEL           0x00000001    /* Frame Sync MUX Select */
+#define SPORT_CTL2_CKMUXSEL           0x00000002    /* Clock MUX Select */
+#define SPORT_CTL2_LBSEL              0x00000004    /* Loopback Select */
+
+struct sport_register {
+	u32 spctl;
+	u32 div;
+	u32 spmctl;
+	u32 spcs0;
+	u32 spcs1;
+	u32 spcs2;
+	u32 spcs3;
+	u32 spcnt;
+	u32 sperrctl;
+	u32 spmstat;
+	u32 spctl2;
+	u32 txa;
+	u32 rxa;
+	u32 txb;
+	u32 rxb;
+	u32 revid;
+};
+
+struct bfin_snd_platform_data {
+	const unsigned short *pin_req;
+};
+
+#endif