Commit e58bc06e authored by Matthew Wilcox's avatar Matthew Wilcox Committed by James Bottomley

[SCSI] sym53c8xx: Remove ->device_id

Following the same path as ->revision_id, remove ->device_id
Signed-off-by: default avatarMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent bd678450
......@@ -205,13 +205,13 @@ sym_fw2_patch(struct sym_hcb *np)
* Remove a couple of work-arounds specific to C1010 if
* they are not desirable. See `sym_fw2.h' for more details.
*/
if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_66 &&
if (!(np->s.device->device == PCI_DEVICE_ID_LSI_53C1010_66 &&
np->s.device->revision < 0x1 &&
np->pciclk_khz < 60000)) {
scripta0->datao_phase[0] = cpu_to_scr(SCR_NO_OP);
scripta0->datao_phase[1] = cpu_to_scr(0);
}
if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 /* &&
if (!(np->s.device->device == PCI_DEVICE_ID_LSI_53C1010_33 /* &&
np->s.device->revision < 0xff */)) {
scripta0->sel_done[0] = cpu_to_scr(SCR_NO_OP);
scripta0->sel_done[1] = cpu_to_scr(0);
......
......@@ -1255,7 +1255,7 @@ static int sym_host_info(struct sym_hcb *np, char *ptr, off_t offset, int len)
copy_info(&info, "Chip " NAME53C "%s, device id 0x%x, "
"revision id 0x%x\n", np->s.chip_name,
np->device_id, np->s.device->revision);
np->s.device->device, np->s.device->revision);
copy_info(&info, "At PCI address %s, IRQ " IRQ_FMT "\n",
pci_name(np->s.device), IRQ_PRM(np->s.device->irq));
copy_info(&info, "Min. period factor %d, %s SCSI BUS%s\n",
......@@ -1410,7 +1410,6 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
np->verbose = sym_driver_setup.verbose;
np->s.device = pdev;
np->s.unit = unit;
np->device_id = dev->chip.device_id;
np->features = dev->chip.features;
np->clock_divn = dev->chip.nr_divisor;
np->maxoffs = dev->chip.offset_max;
......@@ -1528,7 +1527,6 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
static void __devinit sym_get_nvram(struct sym_device *devp, struct sym_nvram *nvp)
{
devp->nvram = nvp;
devp->device_id = devp->chip.device_id;
nvp->type = 0;
sym_read_nvram(devp, nvp);
......
......@@ -212,7 +212,6 @@ struct sym_device {
} s;
struct sym_chip chip;
struct sym_nvram *nvram;
u_short device_id;
u_char host_id;
};
......
......@@ -804,7 +804,7 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru
* In dual channel mode, contention occurs if internal cycles
* are used. Disable internal cycles.
*/
if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 &&
if (np->s.device->device == PCI_DEVICE_ID_LSI_53C1010_33 &&
np->s.device->revision < 0x1)
np->rv_ccntl0 |= DILS;
......@@ -828,9 +828,9 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru
* this driver. The generic ncr driver that does not use
* LOAD/STORE instructions does not need this work-around.
*/
if ((np->device_id == PCI_DEVICE_ID_NCR_53C810 &&
if ((np->s.device->device == PCI_DEVICE_ID_NCR_53C810 &&
np->s.device->revision >= 0x10 && np->s.device->revision <= 0x11) ||
(np->device_id == PCI_DEVICE_ID_NCR_53C860 &&
(np->s.device->device == PCI_DEVICE_ID_NCR_53C860 &&
np->s.device->revision <= 0x1))
np->features &= ~(FE_WRIE|FE_ERL|FE_ERMP);
......@@ -897,7 +897,7 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru
if ((SYM_SETUP_SCSI_LED ||
(nvram->type == SYM_SYMBIOS_NVRAM ||
(nvram->type == SYM_TEKRAM_NVRAM &&
np->device_id == PCI_DEVICE_ID_NCR_53C895))) &&
np->s.device->device == PCI_DEVICE_ID_NCR_53C895))) &&
!(np->features & FE_LEDC) && !(np->sv_gpcntl & 0x01))
np->features |= FE_LED0;
......@@ -1798,7 +1798,7 @@ void sym_start_up (struct sym_hcb *np, int reason)
/*
* For now, disable AIP generation on C1010-66.
*/
if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_66)
if (np->s.device->device == PCI_DEVICE_ID_LSI_53C1010_66)
OUTB(np, nc_aipcntl1, DISAIP);
/*
......@@ -1808,7 +1808,7 @@ void sym_start_up (struct sym_hcb *np, int reason)
* that from SCRIPTS for each selection/reselection, but
* I just don't want. :)
*/
if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 &&
if (np->s.device->device == PCI_DEVICE_ID_LSI_53C1010_33 &&
np->s.device->revision < 1)
OUTB(np, nc_stest1, INB(np, nc_stest1) | 0x30);
......@@ -1817,9 +1817,9 @@ void sym_start_up (struct sym_hcb *np, int reason)
* Disable overlapped arbitration for some dual function devices,
* regardless revision id (kind of post-chip-design feature. ;-))
*/
if (np->device_id == PCI_DEVICE_ID_NCR_53C875)
if (np->s.device->device == PCI_DEVICE_ID_NCR_53C875)
OUTB(np, nc_ctest0, (1<<5));
else if (np->device_id == PCI_DEVICE_ID_NCR_53C896)
else if (np->s.device->device == PCI_DEVICE_ID_NCR_53C896)
np->rv_ccntl0 |= DPR;
/*
......
......@@ -918,7 +918,6 @@ struct sym_hcb {
/*
* General controller parameters and configuration.
*/
u_short device_id; /* PCI device id */
u_int features; /* Chip features map */
u_char myaddr; /* SCSI id of the adapter */
u_char maxburst; /* log base 2 of dwords burst */
......
......@@ -696,7 +696,7 @@ static int sym_read_Tekram_nvram (struct sym_device *np, Tekram_nvram *nvram)
u_short csum;
int x;
switch (np->device_id) {
switch (np->pdev->device) {
case PCI_DEVICE_ID_NCR_53C885:
case PCI_DEVICE_ID_NCR_53C895:
case PCI_DEVICE_ID_NCR_53C896:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment