ARM: dts: imx6: remove fsl,anatop property from usb controller node

This property is not needed for usb controller. The usb phy needs it
instead.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/nxp/imx/imx6sll.dtsi

@@ -683,7 +683,6 @@ usbotg1: usb@2184000 {
 				clocks = <&clks IMX6SLL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
 				rx-burst-size-dword = <0x10>;

arch/arm/boot/dts/nxp/imx/imx6sx.dtsi

@@ -929,7 +929,6 @@ usbotg1: usb@2184000 {
 				clocks = <&clks IMX6SX_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
 				rx-burst-size-dword = <0x10>;
@@ -957,7 +956,6 @@ usbh: usb@2184400 {
 				fsl,usbphy = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc 2>;
 				phy_type = "hsic";
-				fsl,anatop = <&anatop>;
 				dr_mode = "host";
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;