Commit e5d4b200 authored by Bharat Kumar Gogada's avatar Bharat Kumar Gogada Committed by Bjorn Helgaas

PCI: xilinx: Update Zynq binding with Microblaze node

Update Zynq PCI binding documentation with Microblaze node.

[bhelgaas: fix "microbalze_0_intc" typo]
Signed-off-by: default avatarBharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: default avatarRavi Kiran Gummaluri <rgummal@xilinx.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Acked-by: default avatarMichal Simek <michal.simek@xilinx.com>
parent 2c51391d
...@@ -17,7 +17,7 @@ Required properties: ...@@ -17,7 +17,7 @@ Required properties:
Please refer to the standard PCI bus binding document for a more Please refer to the standard PCI bus binding document for a more
detailed explanation detailed explanation
Optional properties: Optional properties for Zynq/Microblaze:
- bus-range: PCI bus numbers covered - bus-range: PCI bus numbers covered
Interrupt controller child node Interrupt controller child node
...@@ -38,13 +38,13 @@ the four INTx interrupts in ISR and route them to this domain. ...@@ -38,13 +38,13 @@ the four INTx interrupts in ISR and route them to this domain.
Example: Example:
++++++++ ++++++++
Zynq:
pci_express: axi-pcie@50000000 { pci_express: axi-pcie@50000000 {
#address-cells = <3>; #address-cells = <3>;
#size-cells = <2>; #size-cells = <2>;
#interrupt-cells = <1>; #interrupt-cells = <1>;
compatible = "xlnx,axi-pcie-host-1.00.a"; compatible = "xlnx,axi-pcie-host-1.00.a";
reg = < 0x50000000 0x10000000 >; reg = < 0x50000000 0x1000000 >;
device_type = "pci"; device_type = "pci";
interrupts = < 0 52 4 >; interrupts = < 0 52 4 >;
interrupt-map-mask = <0 0 0 7>; interrupt-map-mask = <0 0 0 7>;
...@@ -60,3 +60,29 @@ Example: ...@@ -60,3 +60,29 @@ Example:
#interrupt-cells = <1>; #interrupt-cells = <1>;
}; };
}; };
Microblaze:
pci_express: axi-pcie@10000000 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "xlnx,axi-pcie-host-1.00.a";
reg = <0x10000000 0x4000000>;
device_type = "pci";
interrupt-parent = <&microblaze_0_intc>;
interrupts = <1 2>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc 1>,
<0 0 0 2 &pcie_intc 2>,
<0 0 0 3 &pcie_intc 3>,
<0 0 0 4 &pcie_intc 4>;
ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
pcie_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment