Commit e7604ae2 authored by Dinh Nguyen's avatar Dinh Nguyen

ARM: socfpga: dts: add clock fields for I2C, UART and USB on Arria10

Add the required clock fields for all the I2C nodes. Also add missing clock
fields for UART0 and USB1.
Signed-off-by: default avatarDinh Nguyen <dinguyen@opensource.altera.com>
parent 6ff33f39
...@@ -519,6 +519,7 @@ i2c0: i2c@ffc02200 { ...@@ -519,6 +519,7 @@ i2c0: i2c@ffc02200 {
compatible = "snps,designware-i2c"; compatible = "snps,designware-i2c";
reg = <0xffc02200 0x100>; reg = <0xffc02200 0x100>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sp_clk>;
status = "disabled"; status = "disabled";
}; };
...@@ -528,6 +529,7 @@ i2c1: i2c@ffc02300 { ...@@ -528,6 +529,7 @@ i2c1: i2c@ffc02300 {
compatible = "snps,designware-i2c"; compatible = "snps,designware-i2c";
reg = <0xffc02300 0x100>; reg = <0xffc02300 0x100>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sp_clk>;
status = "disabled"; status = "disabled";
}; };
...@@ -537,6 +539,7 @@ i2c2: i2c@ffc02400 { ...@@ -537,6 +539,7 @@ i2c2: i2c@ffc02400 {
compatible = "snps,designware-i2c"; compatible = "snps,designware-i2c";
reg = <0xffc02400 0x100>; reg = <0xffc02400 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sp_clk>;
status = "disabled"; status = "disabled";
}; };
...@@ -546,6 +549,7 @@ i2c3: i2c@ffc02500 { ...@@ -546,6 +549,7 @@ i2c3: i2c@ffc02500 {
compatible = "snps,designware-i2c"; compatible = "snps,designware-i2c";
reg = <0xffc02500 0x100>; reg = <0xffc02500 0x100>;
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sp_clk>;
status = "disabled"; status = "disabled";
}; };
...@@ -555,6 +559,7 @@ i2c4: i2c@ffc02600 { ...@@ -555,6 +559,7 @@ i2c4: i2c@ffc02600 {
compatible = "snps,designware-i2c"; compatible = "snps,designware-i2c";
reg = <0xffc02600 0x100>; reg = <0xffc02600 0x100>;
interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>; interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sp_clk>;
status = "disabled"; status = "disabled";
}; };
...@@ -658,6 +663,7 @@ uart0: serial0@ffc02000 { ...@@ -658,6 +663,7 @@ uart0: serial0@ffc02000 {
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>; reg-shift = <2>;
reg-io-width = <4>; reg-io-width = <4>;
clocks = <&l4_sp_clk>;
status = "disabled"; status = "disabled";
}; };
...@@ -692,6 +698,8 @@ usb1: usb@ffb40000 { ...@@ -692,6 +698,8 @@ usb1: usb@ffb40000 {
compatible = "snps,dwc2"; compatible = "snps,dwc2";
reg = <0xffb40000 0xffff>; reg = <0xffb40000 0xffff>;
interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usb_clk>;
clock-names = "otg";
phys = <&usbphy0>; phys = <&usbphy0>;
phy-names = "usb2-phy"; phy-names = "usb2-phy";
status = "disabled"; status = "disabled";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment