ARM: OMAP3: Add cpuidle parameters table for omap3430

[ Upstream commit 98f42221 ]

Based on CPU type choose generic omap3 or omap3430 specific cpuidle
parameters. Parameters for omap3430 were measured on Nokia N900 device and
added by commit 5a1b1d3a ("OMAP3: RX-51: Pass cpu idle parameters")
which were later removed by commit 231900af ("ARM: OMAP3: cpuidle -
remove rx51 cpuidle parameters table") due to huge code complexity.

This patch brings cpuidle parameters for omap3430 devices again, but uses
simple condition based on CPU type.

Fixes: 231900af ("ARM: OMAP3: cpuidle - remove rx51 cpuidle
parameters table")
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

arch/arm/mach-omap2/cpuidle34xx.c

@@ -34,6 +34,7 @@
 #include "pm.h"
 #include "control.h"
 #include "common.h"
+#include "soc.h"
 
 /* Mach specific information to be recorded in the C-state driver_data */
 struct omap3_idle_statedata {
@@ -322,6 +323,69 @@ static struct cpuidle_driver omap3_idle_driver = {
 	.safe_state_index = 0,
 };
 
+/*
+ * Numbers based on measurements made in October 2009 for PM optimized kernel
+ * with CPU freq enabled on device Nokia N900. Assumes OPP2 (main idle OPP,
+ * and worst case latencies).
+ */
+static struct cpuidle_driver omap3430_idle_driver = {
+	.name             = "omap3430_idle",
+	.owner            = THIS_MODULE,
+	.states = {
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 110 + 162,
+			.target_residency = 5,
+			.name		  = "C1",
+			.desc		  = "MPU ON + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 106 + 180,
+			.target_residency = 309,
+			.name		  = "C2",
+			.desc		  = "MPU ON + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 107 + 410,
+			.target_residency = 46057,
+			.name		  = "C3",
+			.desc		  = "MPU RET + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 121 + 3374,
+			.target_residency = 46057,
+			.name		  = "C4",
+			.desc		  = "MPU OFF + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 855 + 1146,
+			.target_residency = 46057,
+			.name		  = "C5",
+			.desc		  = "MPU RET + CORE RET",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 7580 + 4134,
+			.target_residency = 484329,
+			.name		  = "C6",
+			.desc		  = "MPU OFF + CORE RET",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 7505 + 15274,
+			.target_residency = 484329,
+			.name		  = "C7",
+			.desc		  = "MPU OFF + CORE OFF",
+		},
+	},
+	.state_count = ARRAY_SIZE(omap3_idle_data),
+	.safe_state_index = 0,
+};
+
 /* Public functions */
 
 /**
@@ -340,5 +404,8 @@ int __init omap3_idle_init(void)
 	if (!mpu_pd || !core_pd || !per_pd || !cam_pd)
 		return -ENODEV;
 
+	if (cpu_is_omap3430())
+		return cpuidle_register(&omap3430_idle_driver, NULL);
+	else
 		return cpuidle_register(&omap3_idle_driver, NULL);
 }