Commit e7c25b93 authored by Paul Mackerras's avatar Paul Mackerras Committed by Luis Henriques

powerpc/powernv: Switch off MMU before entering nap/sleep/rvwinkle mode

commit 8117ac6a upstream.

Currently, when going idle, we set the flag indicating that we are in
nap mode (paca->kvm_hstate.hwthread_state) and then execute the nap
(or sleep or rvwinkle) instruction, all with the MMU on.  This is bad
for two reasons: (a) the architecture specifies that those instructions
must be executed with the MMU off, and in fact with only the SF, HV, ME
and possibly RI bits set, and (b) this introduces a race, because as
soon as we set the flag, another thread can switch the MMU to a guest
context.  If the race is lost, this thread will typically start looping
on relocation-on ISIs at 0xc...4400.

This fixes it by setting the MSR as required by the architecture before
setting the flag or executing the nap/sleep/rvwinkle instruction.

[ shreyas@linux.vnet.ibm.com: Edited to handle LE ]
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
Signed-off-by: default avatarShreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
parent 5e95fa4f
...@@ -118,8 +118,10 @@ ...@@ -118,8 +118,10 @@
#define __MSR (MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV) #define __MSR (MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV)
#ifdef __BIG_ENDIAN__ #ifdef __BIG_ENDIAN__
#define MSR_ __MSR #define MSR_ __MSR
#define MSR_IDLE (MSR_ME | MSR_SF | MSR_HV)
#else #else
#define MSR_ (__MSR | MSR_LE) #define MSR_ (__MSR | MSR_LE)
#define MSR_IDLE (MSR_ME | MSR_SF | MSR_HV | MSR_LE)
#endif #endif
#define MSR_KERNEL (MSR_ | MSR_64BIT) #define MSR_KERNEL (MSR_ | MSR_64BIT)
#define MSR_USER32 (MSR_ | MSR_PR | MSR_EE) #define MSR_USER32 (MSR_ | MSR_PR | MSR_EE)
......
...@@ -101,7 +101,23 @@ _GLOBAL(power7_powersave_common) ...@@ -101,7 +101,23 @@ _GLOBAL(power7_powersave_common)
std r9,_MSR(r1) std r9,_MSR(r1)
std r1,PACAR1(r13) std r1,PACAR1(r13)
_GLOBAL(power7_enter_nap_mode) /*
* Go to real mode to do the nap, as required by the architecture.
* Also, we need to be in real mode before setting hwthread_state,
* because as soon as we do that, another thread can switch
* the MMU context to the guest.
*/
LOAD_REG_IMMEDIATE(r5, MSR_IDLE)
li r6, MSR_RI
andc r6, r9, r6
LOAD_REG_ADDR(r7, power7_enter_nap_mode)
mtmsrd r6, 1 /* clear RI before setting SRR0/1 */
mtspr SPRN_SRR0, r7
mtspr SPRN_SRR1, r5
rfid
.globl power7_enter_nap_mode
power7_enter_nap_mode:
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
/* Tell KVM we're napping */ /* Tell KVM we're napping */
li r4,KVM_HWTHREAD_IN_NAP li r4,KVM_HWTHREAD_IN_NAP
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment