Commit e7d613d1 authored by Josh Cartwright's avatar Josh Cartwright Committed by Felipe Balbi

usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP

Both the PM_RUNTIME and PM_SLEEP callbacks call into the common
msm_otg_{suspend,resume} routines, however these routines are only being
built when CONFIG_PM_SLEEP.  In addition, msm_otg_{suspend,resume} also
depends on msm_hsusb_config_vddcx(), which is only built when
CONFIG_PM_SLEEP.

Fix the CONFIG_PM_RUNTIME, !CONFIG_PM_SLEEP case by changing the
preprocessor conditional, and moving msm_hsusb_config_vddcx().

While we're here, eliminate the CONFIG_PM conditional for setting
up the dev_pm_ops.

This address the following errors Russell King has hit doing randconfig
builds:

drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_suspend':
drivers/usb/phy/phy-msm-usb.c:1691:2: error: implicit declaration of function 'msm_otg_suspend'
drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_resume':
drivers/usb/phy/phy-msm-usb.c:1699:2: error: implicit declaration of function 'msm_otg_resume'

Cc: Ivan T. Ivanov <iivanov@mm-sol.com>
Reported-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: default avatarJosh Cartwright <joshc@codeaurora.org>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent f0f42204
...@@ -159,32 +159,6 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init) ...@@ -159,32 +159,6 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init)
return rc; return rc;
} }
#ifdef CONFIG_PM_SLEEP
#define USB_PHY_SUSP_DIG_VOL 500000
static int msm_hsusb_config_vddcx(int high)
{
int max_vol = USB_PHY_VDD_DIG_VOL_MAX;
int min_vol;
int ret;
if (high)
min_vol = USB_PHY_VDD_DIG_VOL_MIN;
else
min_vol = USB_PHY_SUSP_DIG_VOL;
ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol);
if (ret) {
pr_err("%s: unable to set the voltage for regulator "
"HSUSB_VDDCX\n", __func__);
return ret;
}
pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol);
return ret;
}
#endif
static int msm_hsusb_ldo_set_mode(int on) static int msm_hsusb_ldo_set_mode(int on)
{ {
int ret = 0; int ret = 0;
...@@ -440,7 +414,32 @@ static int msm_otg_reset(struct usb_phy *phy) ...@@ -440,7 +414,32 @@ static int msm_otg_reset(struct usb_phy *phy)
#define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000) #define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000)
#define PHY_RESUME_TIMEOUT_USEC (100 * 1000) #define PHY_RESUME_TIMEOUT_USEC (100 * 1000)
#ifdef CONFIG_PM_SLEEP #ifdef CONFIG_PM
#define USB_PHY_SUSP_DIG_VOL 500000
static int msm_hsusb_config_vddcx(int high)
{
int max_vol = USB_PHY_VDD_DIG_VOL_MAX;
int min_vol;
int ret;
if (high)
min_vol = USB_PHY_VDD_DIG_VOL_MIN;
else
min_vol = USB_PHY_SUSP_DIG_VOL;
ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol);
if (ret) {
pr_err("%s: unable to set the voltage for regulator "
"HSUSB_VDDCX\n", __func__);
return ret;
}
pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol);
return ret;
}
static int msm_otg_suspend(struct msm_otg *motg) static int msm_otg_suspend(struct msm_otg *motg)
{ {
struct usb_phy *phy = &motg->phy; struct usb_phy *phy = &motg->phy;
...@@ -1733,22 +1732,18 @@ static int msm_otg_pm_resume(struct device *dev) ...@@ -1733,22 +1732,18 @@ static int msm_otg_pm_resume(struct device *dev)
} }
#endif #endif
#ifdef CONFIG_PM
static const struct dev_pm_ops msm_otg_dev_pm_ops = { static const struct dev_pm_ops msm_otg_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume) SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume)
SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume, SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume,
msm_otg_runtime_idle) msm_otg_runtime_idle)
}; };
#endif
static struct platform_driver msm_otg_driver = { static struct platform_driver msm_otg_driver = {
.remove = msm_otg_remove, .remove = msm_otg_remove,
.driver = { .driver = {
.name = DRIVER_NAME, .name = DRIVER_NAME,
.owner = THIS_MODULE, .owner = THIS_MODULE,
#ifdef CONFIG_PM
.pm = &msm_otg_dev_pm_ops, .pm = &msm_otg_dev_pm_ops,
#endif
}, },
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment