Commit e800bd03 authored by Mitko Haralanov's avatar Mitko Haralanov Committed by Roland Dreier

IB/qib: Update active link width

Update the active link width on QLE7220 chips when link goes down if
chip width does not match shadowed width.
Signed-off-by: default avatarMitko Haralanov <mitko@qlogic.com>
Signed-off-by: default avatarMike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: default avatarRoland Dreier <roland@purestorage.com>
parent 4356d0b6
......@@ -2434,6 +2434,7 @@ static int qib_7220_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val)
int lsb, ret = 0, setforce = 0;
u16 lcmd, licmd;
unsigned long flags;
u32 tmp = 0;
switch (which) {
case QIB_IB_CFG_LIDLMC:
......@@ -2467,9 +2468,6 @@ static int qib_7220_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val)
maskr = IBA7220_IBC_WIDTH_MASK;
lsb = IBA7220_IBC_WIDTH_SHIFT;
setforce = 1;
spin_lock_irqsave(&ppd->lflags_lock, flags);
ppd->lflags |= QIBL_IB_FORCE_NOTIFY;
spin_unlock_irqrestore(&ppd->lflags_lock, flags);
break;
case QIB_IB_CFG_SPD_ENB: /* set allowed Link speeds */
......@@ -2643,6 +2641,28 @@ static int qib_7220_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val)
goto bail;
}
qib_set_ib_7220_lstate(ppd, lcmd, licmd);
maskr = IBA7220_IBC_WIDTH_MASK;
lsb = IBA7220_IBC_WIDTH_SHIFT;
tmp = (ppd->cpspec->ibcddrctrl >> lsb) & maskr;
/* If the width active on the chip does not match the
* width in the shadow register, write the new active
* width to the chip.
* We don't have to worry about speed as the speed is taken
* care of by set_7220_ibspeed_fast called by ib_updown.
*/
if (ppd->link_width_enabled-1 != tmp) {
ppd->cpspec->ibcddrctrl &= ~(maskr << lsb);
ppd->cpspec->ibcddrctrl |=
(((u64)(ppd->link_width_enabled-1) & maskr) <<
lsb);
qib_write_kreg(dd, kr_ibcddrctrl,
ppd->cpspec->ibcddrctrl);
qib_write_kreg(dd, kr_scratch, 0);
spin_lock_irqsave(&ppd->lflags_lock, flags);
ppd->lflags |= QIBL_IB_FORCE_NOTIFY;
spin_unlock_irqrestore(&ppd->lflags_lock, flags);
}
goto bail;
case QIB_IB_CFG_HRTBT: /* set Heartbeat off/enable/auto */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment