Commit e80729db authored by Uwe Kleine-König's avatar Uwe Kleine-König Committed by Shawn Guo

ARM: dts: imx6sx-softing-vining-2000: Use #pwm-cells = <3> for imx27-pwm device

The binding dictates using 3 pwm-cells. Adhere to that.

This fixes the following dtbs_check warnings:

	arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dtb: pwm@2084000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dtb: pwm@22a8000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#

There is no need for an explicit status = "okay" in the pwm nodes as
the soc dtsi doesn't disable these devices. Drop these properties, too.
Signed-off-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 340bef98
...@@ -46,19 +46,19 @@ led-controller { ...@@ -46,19 +46,19 @@ led-controller {
led-1 { led-1 {
label = "red"; label = "red";
max-brightness = <255>; max-brightness = <255>;
pwms = <&pwm6 0 50000>; pwms = <&pwm6 0 50000 0>;
}; };
led-2 { led-2 {
label = "green"; label = "green";
max-brightness = <255>; max-brightness = <255>;
pwms = <&pwm2 0 50000>; pwms = <&pwm2 0 50000 0>;
}; };
led-3 { led-3 {
label = "blue"; label = "blue";
max-brightness = <255>; max-brightness = <255>;
pwms = <&pwm1 0 50000>; pwms = <&pwm1 0 50000 0>;
}; };
}; };
}; };
...@@ -505,24 +505,18 @@ &pcie { ...@@ -505,24 +505,18 @@ &pcie {
}; };
&pwm1 { &pwm1 {
#pwm-cells = <2>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>; pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
}; };
&pwm2 { &pwm2 {
#pwm-cells = <2>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>; pinctrl-0 = <&pinctrl_pwm2>;
status = "okay";
}; };
&pwm6 { &pwm6 {
#pwm-cells = <2>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm6>; pinctrl-0 = <&pinctrl_pwm6>;
status = "okay";
}; };
&reg_arm { &reg_arm {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment