usb: dwc3: don't reset device side if dwc3 was configured as host-only

Commit c4a5153e ("usb: dwc3: core: Power-off core/PHYs on
system_suspend in host mode") replaces check for HOST only dr_mode with
current_dr_role. But during booting, the current_dr_role isn't
initialized, thus the device side reset is always issued even if dwc3
was configured as host-only. What's more, on some platforms with host
only dwc3, aways issuing device side reset by accessing device register
block can cause kernel panic.

Fixes: c4a5153e ("usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230627162018.739-1-jszhang@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/dwc3/core.c

@@ -277,9 +277,9 @@ int dwc3_core_soft_reset(struct dwc3 *dwc)
 	/*
 	 * We're resetting only the device side because, if we're in host mode,
 	 * XHCI driver will reset the host block. If dwc3 was configured for
-	 * host-only mode, then we can return early.
+	 * host-only mode or current role is host, then we can return early.
 	 */
-	if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
+	if (dwc->dr_mode == USB_DR_MODE_HOST || dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
 		return 0;
 
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);