Commit e8a0b37d authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:
 "Bigger items included in this update are:

   - A series of updates from Arnd for ARM randconfig build failures
   - Updates from Dmitry for StrongARM SA-1100 to move IRQ handling to
     drivers/irqchip/
   - Move ARMs SP804 timer to drivers/clocksource/
   - Perf updates from Mark Rutland in preparation to move the ARM perf
     code into drivers/ so it can be shared with ARM64.
   - MCPM updates from Nicolas
   - Add support for taking platform serial number from DT
   - Re-implement Keystone2 physical address space switch to conform to
     architecture requirements
   - Clean up ARMv7 LPAE code, which goes in hand with the Keystone2
     changes.
   - L2C cleanups to avoid unlocking caches if we're prevented by the
     secure support to unlock.
   - Avoid cleaning a potentially dirty cache containing stale data on
     CPU initialisation
   - Add ARM-only entry point for secondary startup (for machines that
     can only call into a Thumb kernel in ARM mode).  Same thing is also
     done for the resume entry point.
   - Provide arch_irqs_disabled via asm-generic
   - Enlarge ARMv7M vector table
   - Always use BFD linker for VDSO, as gold doesn't accept some of the
     options we need.
   - Fix an incorrect BSYM (for Thumb symbols) usage, and convert all
     BSYM compiler macros to a "badr" (for branch address).
   - Shut up compiler warnings provoked by our cmpxchg() implementation.
   - Ensure bad xchg sizes fail to link"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (75 commits)
  ARM: Fix build if CLKDEV_LOOKUP is not configured
  ARM: fix new BSYM() usage introduced via for-arm-soc branch
  ARM: 8383/1: nommu: avoid deprecated source register on mov
  ARM: 8391/1: l2c: add options to overwrite prefetching behavior
  ARM: 8390/1: irqflags: Get arch_irqs_disabled from asm-generic
  ARM: 8387/1: arm/mm/dma-mapping.c: Add arm_coherent_dma_mmap
  ARM: 8388/1: tcm: Don't crash when TCM banks are protected by TrustZone
  ARM: 8384/1: VDSO: force use of BFD linker
  ARM: 8385/1: VDSO: group link options
  ARM: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations
  ARM: remove __bad_xchg definition
  ARM: 8369/1: ARMv7M: define size of vector table for Vybrid
  ARM: 8382/1: clocksource: make ARM_TIMER_SP804 depend on GENERIC_SCHED_CLOCK
  ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksource
  ARM: 8365/1: introduce sp804_timer_disable and remove arm_timer.h inclusion
  ARM: 8364/1: fix BE32 module loading
  ARM: 8360/1: add secondary_startup_arm prototype in header file
  ARM: 8359/1: correct secondary_startup_arm mode
  ARM: proc-v7: sanitise and document registers around errata
  ARM: proc-v7: clean up MIDR access
  ...
parents abea9629 002af195
......@@ -67,6 +67,11 @@ Optional properties:
disable if zero.
- arm,prefetch-offset : Override prefetch offset value. Valid values are
0-7, 15, 23, and 31.
- prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1>
(forcibly enable), property absent (retain settings set by firmware)
- prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable),
<1> (forcibly enable), property absent (retain settings set by
firmware)
Example:
......
......@@ -856,6 +856,10 @@ address which can extend beyond that limit.
name may clash with standard defined ones, you prefix them with your
vendor name and a comma.
Additional properties for the root node:
- serial-number : a string representing the device's serial number
b) The /cpus node
This node is the parent of all individual CPU nodes. It doesn't
......
......@@ -33,8 +33,8 @@ config ARM
select HARDIRQS_SW_RESEND
select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
select HAVE_ARCH_KGDB
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32
select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32
select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
select HAVE_ARCH_TRACEHOOK
select HAVE_BPF_JIT
......@@ -45,7 +45,7 @@ config ARM
select HAVE_DMA_API_DEBUG
select HAVE_DMA_ATTRS
select HAVE_DMA_CONTIGUOUS if MMU
select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32
select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
......@@ -59,10 +59,10 @@ config ARM
select HAVE_KERNEL_LZMA
select HAVE_KERNEL_LZO
select HAVE_KERNEL_XZ
select HAVE_KPROBES if !XIP_KERNEL
select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_MEMBLOCK
select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_OPTPROBES if !THUMB2_KERNEL
select HAVE_PERF_EVENTS
......@@ -173,7 +173,7 @@ config LOCKDEP_SUPPORT
config TRACE_IRQFLAGS_SUPPORT
bool
default y
default !CPU_V7M
config RWSEM_XCHGADD_ALGORITHM
bool
......@@ -1010,11 +1010,6 @@ config PLAT_PXA
config PLAT_VERSATILE
bool
config ARM_TIMER_SP804
bool
select CLKSRC_MMIO
select CLKSRC_OF if OF
source "arch/arm/firmware/Kconfig"
source arch/arm/mm/Kconfig
......@@ -1342,6 +1337,7 @@ config SMP
depends on GENERIC_CLOCKEVENTS
depends on HAVE_SMP
depends on MMU || ARM_MPU
select IRQ_WORK
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, say N. If you have a system with more
......@@ -1717,6 +1713,21 @@ config HAVE_ARCH_TRANSPARENT_HUGEPAGE
config ARCH_WANT_GENERAL_HUGETLB
def_bool y
config ARM_MODULE_PLTS
bool "Use PLTs to allow module memory to spill over into vmalloc area"
depends on MODULES
help
Allocate PLTs when loading modules so that jumps and calls whose
targets are too far away for their relative offsets to be encoded
in the instructions themselves can be bounced via veneers in the
module's PLT. This allows modules to be allocated in the generic
vmalloc area after the dedicated module memory area has been
exhausted. The modules will use slightly more memory, but after
rounding up to page size, the actual memory footprint is usually
the same.
Say y if you are getting out of memory errors while loading modules
source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
......@@ -1987,6 +1998,7 @@ config XIP_PHYS_ADDR
config KEXEC
bool "Kexec system call (EXPERIMENTAL)"
depends on (!SMP || PM_SLEEP_SMP)
depends on !CPU_V7M
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
......
......@@ -5,6 +5,7 @@ source "lib/Kconfig.debug"
config ARM_PTDUMP
bool "Export kernel pagetable layout to userspace via debugfs"
depends on DEBUG_KERNEL
depends on MMU
select DEBUG_FS
---help---
Say Y here if you want to show the kernel pagetable layout in a
......
......@@ -19,6 +19,10 @@ LDFLAGS_vmlinux += --be8
LDFLAGS_MODULE += --be8
endif
ifeq ($(CONFIG_ARM_MODULE_PLTS),y)
LDFLAGS_MODULE += -T $(srctree)/arch/arm/kernel/module.lds
endif
OBJCOPYFLAGS :=-O binary -R .comment -S
GZFLAGS :=-9
#KBUILD_CFLAGS +=-pipe
......
......@@ -103,6 +103,8 @@ extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \
lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \
hyp-stub.S
KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
......
......@@ -130,7 +130,7 @@ start:
.endr
ARM( mov r0, r0 )
ARM( b 1f )
THUMB( adr r12, BSYM(1f) )
THUMB( badr r12, 1f )
THUMB( bx r12 )
.word _magic_sig @ Magic numbers to help the loader
......@@ -447,7 +447,7 @@ dtb_check_done:
bl cache_clean_flush
adr r0, BSYM(restart)
badr r0, restart
add r0, r0, r6
mov pc, r0
......
......@@ -11,7 +11,6 @@ obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o
obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o
obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
CFLAGS_REMOVE_mcpm_entry.o = -pg
AFLAGS_mcpm_head.o := -march=armv7-a
......
This diff is collapsed.
......@@ -49,7 +49,7 @@
ENTRY(mcpm_entry_point)
ARM_BE8(setend be)
THUMB( adr r12, BSYM(1f) )
THUMB( badr r12, 1f )
THUMB( bx r12 )
THUMB( .thumb )
1:
......
......@@ -177,6 +177,21 @@
restore_irqs_notrace \oldcpsr
.endm
/*
* Assembly version of "adr rd, BSYM(sym)". This should only be used to
* reference local symbols in the same assembly file which are to be
* resolved by the assembler. Other usage is undefined.
*/
.irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
.macro badr\c, rd, sym
#ifdef CONFIG_THUMB2_KERNEL
adr\c \rd, \sym + 1
#else
adr\c \rd, \sym
#endif
.endm
.endr
/*
* Get current thread_info.
*/
......@@ -326,7 +341,7 @@
THUMB( orr \reg , \reg , #PSR_T_BIT )
bne 1f
orr \reg, \reg, #PSR_A_BIT
adr lr, BSYM(2f)
badr lr, 2f
msr spsr_cxsf, \reg
__MSR_ELR_HYP(14)
__ERET
......
......@@ -482,10 +482,17 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size)
: : : "r0","r1","r2","r3","r4","r5","r6","r7", \
"r9","r10","lr","memory" )
#ifdef CONFIG_MMU
int set_memory_ro(unsigned long addr, int numpages);
int set_memory_rw(unsigned long addr, int numpages);
int set_memory_x(unsigned long addr, int numpages);
int set_memory_nx(unsigned long addr, int numpages);
#else
static inline int set_memory_ro(unsigned long addr, int numpages) { return 0; }
static inline int set_memory_rw(unsigned long addr, int numpages) { return 0; }
static inline int set_memory_x(unsigned long addr, int numpages) { return 0; }
static inline int set_memory_nx(unsigned long addr, int numpages) { return 0; }
#endif
#ifdef CONFIG_DEBUG_RODATA
void mark_rodata_ro(void);
......
......@@ -94,6 +94,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
break;
#endif
default:
/* Cause a link-time error, the xchg() size is not supported */
__bad_xchg(ptr, size), ret = 0;
break;
}
......@@ -102,8 +103,10 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
return ret;
}
#define xchg(ptr,x) \
((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
#define xchg(ptr, x) ({ \
(__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), \
sizeof(*(ptr))); \
})
#include <asm-generic/cmpxchg-local.h>
......@@ -118,14 +121,16 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
* cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
* them available.
*/
#define cmpxchg_local(ptr, o, n) \
((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
(unsigned long)(n), sizeof(*(ptr))))
#define cmpxchg_local(ptr, o, n) ({ \
(__typeof(*ptr))__cmpxchg_local_generic((ptr), \
(unsigned long)(o), \
(unsigned long)(n), \
sizeof(*(ptr))); \
})
#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
#ifndef CONFIG_SMP
#include <asm-generic/cmpxchg.h>
#endif
#else /* min ARCH >= ARMv6 */
......@@ -201,11 +206,12 @@ static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
return ret;
}
#define cmpxchg(ptr,o,n) \
((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \
#define cmpxchg(ptr,o,n) ({ \
(__typeof__(*(ptr)))__cmpxchg_mb((ptr), \
(unsigned long)(o), \
(unsigned long)(n), \
sizeof(*(ptr))))
sizeof(*(ptr))); \
})
static inline unsigned long __cmpxchg_local(volatile void *ptr,
unsigned long old,
......@@ -227,6 +233,13 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
return ret;
}
#define cmpxchg_local(ptr, o, n) ({ \
(__typeof(*ptr))__cmpxchg_local((ptr), \
(unsigned long)(o), \
(unsigned long)(n), \
sizeof(*(ptr))); \
})
static inline unsigned long long __cmpxchg64(unsigned long long *ptr,
unsigned long long old,
unsigned long long new)
......@@ -252,6 +265,14 @@ static inline unsigned long long __cmpxchg64(unsigned long long *ptr,
return oldval;
}
#define cmpxchg64_relaxed(ptr, o, n) ({ \
(__typeof__(*(ptr)))__cmpxchg64((ptr), \
(unsigned long long)(o), \
(unsigned long long)(n)); \
})
#define cmpxchg64_local(ptr, o, n) cmpxchg64_relaxed((ptr), (o), (n))
static inline unsigned long long __cmpxchg64_mb(unsigned long long *ptr,
unsigned long long old,
unsigned long long new)
......@@ -265,23 +286,11 @@ static inline unsigned long long __cmpxchg64_mb(unsigned long long *ptr,
return ret;
}
#define cmpxchg_local(ptr,o,n) \
((__typeof__(*(ptr)))__cmpxchg_local((ptr), \
(unsigned long)(o), \
(unsigned long)(n), \
sizeof(*(ptr))))
#define cmpxchg64(ptr, o, n) \
((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \
#define cmpxchg64(ptr, o, n) ({ \
(__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \
(unsigned long long)(o), \
(unsigned long long)(n)))
#define cmpxchg64_relaxed(ptr, o, n) \
((__typeof__(*(ptr)))__cmpxchg64((ptr), \
(unsigned long long)(o), \
(unsigned long long)(n)))
#define cmpxchg64_local(ptr, o, n) cmpxchg64_relaxed((ptr), (o), (n))
(unsigned long long)(n)); \
})
#endif /* __LINUX_ARM_ARCH__ >= 6 */
......
......@@ -10,7 +10,7 @@
@
@ routine called with r0 = irq number, r1 = struct pt_regs *
@
adrne lr, BSYM(1b)
badrne lr, 1b
bne asm_do_IRQ
#ifdef CONFIG_SMP
......@@ -23,7 +23,7 @@
ALT_SMP(test_for_ipi r0, r2, r6, lr)
ALT_UP_B(9997f)
movne r1, sp
adrne lr, BSYM(1b)
badrne lr, 1b
bne do_IPI
#endif
9997:
......
......@@ -23,6 +23,7 @@
#ifdef __KERNEL__
#include <linux/string.h>
#include <linux/types.h>
#include <linux/blk_types.h>
#include <asm/byteorder.h>
......@@ -73,17 +74,16 @@ void __raw_readsl(const volatile void __iomem *addr, void *data, int longlen);
static inline void __raw_writew(u16 val, volatile void __iomem *addr)
{
asm volatile("strh %1, %0"
: "+Q" (*(volatile u16 __force *)addr)
: "r" (val));
: : "Q" (*(volatile u16 __force *)addr), "r" (val));
}
#define __raw_readw __raw_readw
static inline u16 __raw_readw(const volatile void __iomem *addr)
{
u16 val;
asm volatile("ldrh %1, %0"
: "+Q" (*(volatile u16 __force *)addr),
"=r" (val));
asm volatile("ldrh %0, %1"
: "=r" (val)
: "Q" (*(volatile u16 __force *)addr));
return val;
}
#endif
......@@ -92,25 +92,23 @@ static inline u16 __raw_readw(const volatile void __iomem *addr)
static inline void __raw_writeb(u8 val, volatile void __iomem *addr)
{
asm volatile("strb %1, %0"
: "+Qo" (*(volatile u8 __force *)addr)
: "r" (val));
: : "Qo" (*(volatile u8 __force *)addr), "r" (val));
}
#define __raw_writel __raw_writel
static inline void __raw_writel(u32 val, volatile void __iomem *addr)
{
asm volatile("str %1, %0"
: "+Qo" (*(volatile u32 __force *)addr)
: "r" (val));
: : "Qo" (*(volatile u32 __force *)addr), "r" (val));
}
#define __raw_readb __raw_readb
static inline u8 __raw_readb(const volatile void __iomem *addr)
{
u8 val;
asm volatile("ldrb %1, %0"
: "+Qo" (*(volatile u8 __force *)addr),
"=r" (val));
asm volatile("ldrb %0, %1"
: "=r" (val)
: "Qo" (*(volatile u8 __force *)addr));
return val;
}
......@@ -118,9 +116,9 @@ static inline u8 __raw_readb(const volatile void __iomem *addr)
static inline u32 __raw_readl(const volatile void __iomem *addr)
{
u32 val;
asm volatile("ldr %1, %0"
: "+Qo" (*(volatile u32 __force *)addr),
"=r" (val));
asm volatile("ldr %0, %1"
: "=r" (val)
: "Qo" (*(volatile u32 __force *)addr));
return val;
}
......@@ -319,9 +317,33 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
#define writesw(p,d,l) __raw_writesw(p,d,l)
#define writesl(p,d,l) __raw_writesl(p,d,l)
#ifndef __ARMBE__
static inline void memset_io(volatile void __iomem *dst, unsigned c,
size_t count)
{
memset((void __force *)dst, c, count);
}
#define memset_io(dst,c,count) memset_io(dst,c,count)
static inline void memcpy_fromio(void *to, const volatile void __iomem *from,
size_t count)
{
memcpy(to, (const void __force *)from, count);
}
#define memcpy_fromio(to,from,count) memcpy_fromio(to,from,count)
static inline void memcpy_toio(volatile void __iomem *to, const void *from,
size_t count)
{
memcpy((void __force *)to, from, count);
}
#define memcpy_toio(to,from,count) memcpy_toio(to,from,count)
#else
#define memset_io(c,v,l) _memset_io(c,(v),(l))
#define memcpy_fromio(a,c,l) _memcpy_fromio((a),c,(l))
#define memcpy_toio(c,a,l) _memcpy_toio(c,(a),(l))
#endif
#endif /* readl */
......
......@@ -20,6 +20,7 @@
#if __LINUX_ARM_ARCH__ >= 6
#define arch_local_irq_save arch_local_irq_save
static inline unsigned long arch_local_irq_save(void)
{
unsigned long flags;
......@@ -31,6 +32,7 @@ static inline unsigned long arch_local_irq_save(void)
return flags;
}
#define arch_local_irq_enable arch_local_irq_enable
static inline void arch_local_irq_enable(void)
{
asm volatile(
......@@ -40,6 +42,7 @@ static inline void arch_local_irq_enable(void)
: "memory", "cc");
}
#define arch_local_irq_disable arch_local_irq_disable
static inline void arch_local_irq_disable(void)
{
asm volatile(
......@@ -56,6 +59,7 @@ static inline void arch_local_irq_disable(void)
/*
* Save the current interrupt enable state & disable IRQs
*/
#define arch_local_irq_save arch_local_irq_save
static inline unsigned long arch_local_irq_save(void)
{
unsigned long flags, temp;
......@@ -73,6 +77,7 @@ static inline unsigned long arch_local_irq_save(void)
/*
* Enable IRQs
*/
#define arch_local_irq_enable arch_local_irq_enable
static inline void arch_local_irq_enable(void)
{
unsigned long temp;
......@@ -88,6 +93,7 @@ static inline void arch_local_irq_enable(void)
/*
* Disable IRQs
*/
#define arch_local_irq_disable arch_local_irq_disable
static inline void arch_local_irq_disable(void)
{
unsigned long temp;
......@@ -135,6 +141,7 @@ static inline void arch_local_irq_disable(void)
/*
* Save the current interrupt enable state.
*/
#define arch_local_save_flags arch_local_save_flags
static inline unsigned long arch_local_save_flags(void)
{
unsigned long flags;
......@@ -147,6 +154,7 @@ static inline unsigned long arch_local_save_flags(void)
/*
* restore saved IRQ & FIQ state
*/
#define arch_local_irq_restore arch_local_irq_restore
static inline void arch_local_irq_restore(unsigned long flags)
{
asm volatile(
......@@ -156,10 +164,13 @@ static inline void arch_local_irq_restore(unsigned long flags)
: "memory", "cc");
}
#define arch_irqs_disabled_flags arch_irqs_disabled_flags
static inline int arch_irqs_disabled_flags(unsigned long flags)
{
return flags & IRQMASK_I_BIT;
}
#include <asm-generic/irqflags.h>
#endif /* ifdef __KERNEL__ */
#endif /* ifndef __ASM_ARM_IRQFLAGS_H */
......@@ -51,7 +51,7 @@ struct machine_desc {
bool (*smp_init)(void);
void (*fixup)(struct tag *, char **);
void (*dt_fixup)(void);
void (*init_meminfo)(void);
long long (*pv_fixup)(void);
void (*reserve)(void);/* reserve mem blocks */
void (*map_io)(void);/* IO mapping function */
void (*init_early)(void);
......
......@@ -137,17 +137,12 @@ int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster);
/**
* mcpm_cpu_suspend - bring the calling CPU in a suspended state
*
* @expected_residency: duration in microseconds the CPU is expected
* to remain suspended, or 0 if unknown/infinity.
*
* The calling CPU is suspended. The expected residency argument is used
* as a hint by the platform specific backend to implement the appropriate
* sleep state level according to the knowledge it has on wake-up latency
* for the given hardware.
* The calling CPU is suspended. This is similar to mcpm_cpu_power_down()
* except for possible extra platform specific configuration steps to allow
* an asynchronous wake-up e.g. with a pending interrupt.
*
* If this CPU is found to be the "last man standing" in the cluster
* then the cluster may be prepared for power-down too, if the expected
* residency makes it worthwhile.
* then the cluster may be prepared for power-down too.
*
* This must be called with interrupts disabled.
*
......@@ -157,7 +152,7 @@ int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster);
* This will return if mcpm_platform_register() has not been called
* previously in which case the caller should take appropriate action.
*/
void mcpm_cpu_suspend(u64 expected_residency);
void mcpm_cpu_suspend(void);
/**
* mcpm_cpu_powered_up - housekeeping workafter a CPU has been powered up
......@@ -234,12 +229,6 @@ struct mcpm_platform_ops {
void (*cpu_is_up)(unsigned int cpu, unsigned int cluster);
void (*cluster_is_up)(unsigned int cluster);
int (*wait_for_powerdown)(unsigned int cpu, unsigned int cluster);
/* deprecated callbacks */
int (*power_up)(unsigned int cpu, unsigned int cluster);
void (*power_down)(void);
void (*suspend)(u64);
void (*powered_up)(void);
};
/**
......@@ -251,35 +240,6 @@ struct mcpm_platform_ops {
*/
int __init mcpm_platform_register(const struct mcpm_platform_ops *ops);
/* Synchronisation structures for coordinating safe cluster setup/teardown: */
/*
* When modifying this structure, make sure you update the MCPM_SYNC_ defines
* to match.
*/
struct mcpm_sync_struct {
/* individual CPU states */
struct {
s8 cpu __aligned(__CACHE_WRITEBACK_GRANULE);
} cpus[MAX_CPUS_PER_CLUSTER];
/* cluster state */
s8 cluster __aligned(__CACHE_WRITEBACK_GRANULE);
/* inbound-side state */
s8 inbound __aligned(__CACHE_WRITEBACK_GRANULE);
};
struct sync_struct {
struct mcpm_sync_struct clusters[MAX_NR_CLUSTERS];
};
void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster);
void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster);
void __mcpm_outbound_leave_critical(unsigned int cluster, int state);
bool __mcpm_outbound_enter_critical(unsigned int this_cpu, unsigned int cluster);
int __mcpm_cluster_state(unsigned int cluster);
/**
* mcpm_sync_init - Initialize the cluster synchronization support
*
......@@ -318,6 +278,29 @@ int __init mcpm_loopback(void (*cache_disable)(void));
void __init mcpm_smp_set_ops(void);
/*
* Synchronisation structures for coordinating safe cluster setup/teardown.
* This is private to the MCPM core code and shared between C and assembly.
* When modifying this structure, make sure you update the MCPM_SYNC_ defines
* to match.
*/
struct mcpm_sync_struct {
/* individual CPU states */
struct {
s8 cpu __aligned(__CACHE_WRITEBACK_GRANULE);
} cpus[MAX_CPUS_PER_CLUSTER];
/* cluster state */
s8 cluster __aligned(__CACHE_WRITEBACK_GRANULE);
/* inbound-side state */
s8 inbound __aligned(__CACHE_WRITEBACK_GRANULE);
};
struct sync_struct {
struct mcpm_sync_struct clusters[MAX_NR_CLUSTERS];
};
#else
/*
......
......@@ -18,8 +18,6 @@
#include <linux/types.h>
#include <linux/sizes.h>
#include <asm/cache.h>
#ifdef CONFIG_NEED_MACH_MEMORY_H
#include <mach/memory.h>
#endif
......@@ -132,20 +130,6 @@
#define page_to_phys(page) (__pfn_to_phys(page_to_pfn(page)))
#define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys)))
/*
* Minimum guaranted alignment in pgd_alloc(). The page table pointers passed
* around in head.S and proc-*.S are shifted by this amount, in order to
* leave spare high bits for systems with physical address extension. This
* does not fully accomodate the 40-bit addressing capability of ARM LPAE, but
* gives us about 38-bits or so.
*/
#ifdef CONFIG_ARM_LPAE
#define ARCH_PGD_SHIFT L1_CACHE_SHIFT
#else
#define ARCH_PGD_SHIFT 0
#endif
#define ARCH_PGD_MASK ((1 << ARCH_PGD_SHIFT) - 1)
/*
* PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical
* memory. This is used for XIP and NoMMU kernels, and on platforms that don't
......
......@@ -16,11 +16,21 @@ enum {
ARM_SEC_UNLIKELY,
ARM_SEC_MAX,
};
#endif
struct mod_arch_specific {
#ifdef CONFIG_ARM_UNWIND
struct unwind_table *unwind[ARM_SEC_MAX];
};
#endif
#ifdef CONFIG_ARM_MODULE_PLTS
struct elf32_shdr *core_plt;
struct elf32_shdr *init_plt;
int core_plt_count;
int init_plt_count;
#endif
};
u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val);
/*
* Add the ARM architecture version to the version magic string
......
......@@ -19,4 +19,11 @@ extern unsigned long perf_misc_flags(struct pt_regs *regs);
#define perf_misc_flags(regs) perf_misc_flags(regs)
#endif
#define perf_arch_fetch_caller_regs(regs, __ip) { \
(regs)->ARM_pc = (__ip); \
(regs)->ARM_fp = (unsigned long) __builtin_frame_address(0); \
(regs)->ARM_sp = current_stack_pointer; \
(regs)->ARM_cpsr = SVC_MODE; \
}
#endif /* __ARM_PERF_EVENT_H__ */
......@@ -24,22 +24,10 @@
* interrupt and passed the address of the low level handler,
* and can be used to implement any platform specific handling
* before or after calling it.
* @runtime_resume: an optional handler which will be called by the
* runtime PM framework following a call to pm_runtime_get().
* Note that if pm_runtime_get() is called more than once in
* succession this handler will only be called once.
* @runtime_suspend: an optional handler which will be called by the
* runtime PM framework following a call to pm_runtime_put().
* Note that if pm_runtime_get() is called more than once in
* succession this handler will only be called following the
* final call to pm_runtime_put() that actually disables the
* hardware.
*/
struct arm_pmu_platdata {
irqreturn_t (*handle_irq)(int irq, void *dev,
irq_handler_t pmu_handler);
int (*runtime_resume)(struct device *dev);
int (*runtime_suspend)(struct device *dev);
};
#ifdef CONFIG_HW_PERF_EVENTS
......@@ -92,6 +80,7 @@ struct pmu_hw_events {
struct arm_pmu {
struct pmu pmu;
cpumask_t active_irqs;
cpumask_t supported_cpus;
int *irq_affinity;
char *name;
irqreturn_t (*handle_irq)(int irq_num, void *dev);
......@@ -122,8 +111,6 @@ struct arm_pmu {
#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
extern const struct dev_pm_ops armpmu_dev_pm_ops;
int armpmu_register(struct arm_pmu *armpmu, int type);
u64 armpmu_event_update(struct perf_event *event);
......@@ -158,6 +145,10 @@ struct pmu_probe_info {
#define XSCALE_PMU_PROBE(_version, _fn) \
PMU_PROBE(ARM_CPU_IMP_INTEL << 24 | _version, ARM_PMU_XSCALE_MASK, _fn)
int arm_pmu_device_probe(struct platform_device *pdev,
const struct of_device_id *of_table,
const struct pmu_probe_info *probe_table);
#endif /* CONFIG_HW_PERF_EVENTS */
#endif /* __ARM_PMU_H__ */
......@@ -125,13 +125,6 @@ extern void cpu_resume(void);
ttbr; \
})
#define cpu_set_ttbr(nr, val) \
do { \
u64 ttbr = val; \
__asm__("mcrr p15, " #nr ", %Q0, %R0, c2" \
: : "r" (ttbr)); \
} while (0)
#define cpu_get_pgd() \
({ \
u64 pg = cpu_get_ttbr(0); \
......
......@@ -61,7 +61,7 @@ asmlinkage void secondary_start_kernel(void);
struct secondary_data {
union {
unsigned long mpu_rgn_szr;
unsigned long pgdir;
u64 pgdir;
};
unsigned long swapper_pg_dir;
void *stack;
......@@ -69,6 +69,7 @@ struct secondary_data {
extern struct secondary_data secondary_data;
extern volatile int pen_release;
extern void secondary_startup(void);
extern void secondary_startup_arm(void);
extern int __cpu_disable(void);
......
......@@ -17,6 +17,7 @@
/* information about the system we're running on */
extern unsigned int system_rev;
extern const char *system_serial;
extern unsigned int system_serial_low;
extern unsigned int system_serial_high;
extern unsigned int mem_fclk_21285;
......
......@@ -45,7 +45,6 @@
#define THUMB(x...) x
#ifdef __ASSEMBLY__
#define W(instr) instr.w
#define BSYM(sym) sym + 1
#else
#define WASM(instr) #instr ".w"
#endif
......@@ -59,7 +58,6 @@
#define THUMB(x...)
#ifdef __ASSEMBLY__
#define W(instr) instr
#define BSYM(sym) sym
#else
#define WASM(instr) #instr
#endif
......
......@@ -34,6 +34,7 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ISA_DMA_API) += dma.o
obj-$(CONFIG_FIQ) += fiq.o fiqasm.o
obj-$(CONFIG_MODULES) += armksyms.o module.o
obj-$(CONFIG_ARM_MODULE_PLTS) += module-plts.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o suspend.o
......@@ -70,7 +71,9 @@ obj-$(CONFIG_CPU_PJ4) += pj4-cp0.o
obj-$(CONFIG_CPU_PJ4B) += pj4-cp0.o
obj-$(CONFIG_IWMMXT) += iwmmxt.o
obj-$(CONFIG_PERF_EVENTS) += perf_regs.o perf_callchain.o
obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o perf_event_cpu.o
obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o \
perf_event_xscale.o perf_event_v6.o \
perf_event_v7.o
CFLAGS_pj4-cp0.o := -marm
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o
......
......@@ -40,7 +40,7 @@
#ifdef CONFIG_MULTI_IRQ_HANDLER
ldr r1, =handle_arch_irq
mov r0, sp
adr lr, BSYM(9997f)
badr lr, 9997f
ldr pc, [r1]
#else
arch_irq_handler_default
......@@ -273,7 +273,7 @@ __und_svc:
str r4, [sp, #S_PC]
orr r0, r9, r0, lsl #16
#endif
adr r9, BSYM(__und_svc_finish)
badr r9, __und_svc_finish
mov r2, r4
bl call_fpe
......@@ -469,7 +469,7 @@ __und_usr:
@ instruction, or the more conventional lr if we are to treat
@ this as a real undefined instruction
@
adr r9, BSYM(ret_from_exception)
badr r9, ret_from_exception
@ IRQs must be enabled before attempting to read the instruction from
@ user space since that could cause a page/translation fault if the
......@@ -486,7 +486,7 @@ __und_usr:
@ r2 = PC value for the following instruction (:= regs->ARM_pc)
@ r4 = PC value for the faulting instruction
@ lr = 32-bit undefined instruction function
adr lr, BSYM(__und_usr_fault_32)
badr lr, __und_usr_fault_32
b call_fpe
__und_usr_thumb:
......@@ -522,7 +522,7 @@ ARM_BE8(rev16 r0, r0) @ little endian instruction
add r2, r2, #2 @ r2 is PC + 2, make it PC + 4
str r2, [sp, #S_PC] @ it's a 2x16bit instr, update
orr r0, r0, r5, lsl #16
adr lr, BSYM(__und_usr_fault_32)
badr lr, __und_usr_fault_32
@ r0 = the two 16-bit Thumb instructions which caused the exception
@ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc)
@ r4 = PC value for the first 16-bit Thumb instruction
......@@ -716,7 +716,7 @@ __und_usr_fault_32:
__und_usr_fault_16:
mov r1, #2
1: mov r0, sp
adr lr, BSYM(ret_from_exception)
badr lr, ret_from_exception
b __und_fault
ENDPROC(__und_usr_fault_32)
ENDPROC(__und_usr_fault_16)
......
......@@ -90,7 +90,7 @@ ENTRY(ret_from_fork)
bl schedule_tail
cmp r5, #0
movne r0, r4
adrne lr, BSYM(1f)
badrne lr, 1f
retne r5
1: get_thread_info tsk
b ret_slow_syscall
......@@ -198,7 +198,7 @@ local_restart:
bne __sys_trace
cmp scno, #NR_syscalls @ check upper syscall limit
adr lr, BSYM(ret_fast_syscall) @ return address
badr lr, ret_fast_syscall @ return address
ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
add r1, sp, #S_OFF
......@@ -233,7 +233,7 @@ __sys_trace:
add r0, sp, #S_OFF
bl syscall_trace_enter
adr lr, BSYM(__sys_trace_return) @ return address
badr lr, __sys_trace_return @ return address
mov scno, r0 @ syscall number (possibly new)
add r1, sp, #S_R0 + S_OFF @ pointer to regs
cmp scno, #NR_syscalls @ check upper syscall limit
......
......@@ -87,7 +87,7 @@
1: mcount_get_lr r1 @ lr of instrumented func
mcount_adjust_addr r0, lr @ instrumented function
adr lr, BSYM(2f)
badr lr, 2f
mov pc, r2
2: mcount_exit
.endm
......
......@@ -117,9 +117,14 @@ ENTRY(__switch_to)
ENDPROC(__switch_to)
.data
.align 8
#if CONFIG_CPU_V7M_NUM_IRQ <= 112
.align 9
#else
.align 10
#endif
/*
* Vector table (64 words => 256 bytes natural alignment)
* Vector table (Natural alignment need to be ensured)
*/
ENTRY(vector_table)
.long 0 @ 0 - Reset stack pointer
......@@ -138,6 +143,6 @@ ENTRY(vector_table)
.long __invalid_entry @ 13 - Reserved
.long __pendsv_entry @ 14 - PendSV
.long __invalid_entry @ 15 - SysTick
.rept 64 - 16
.long __irq_entry @ 16..64 - External Interrupts
.rept CONFIG_CPU_V7M_NUM_IRQ
.long __irq_entry @ External Interrupts
.endr
......@@ -46,7 +46,7 @@ ENTRY(stext)
.arm
ENTRY(stext)
THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM.
THUMB( badr r9, 1f ) @ Kernel is always entered in ARM.
THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
THUMB( .thumb ) @ switch to Thumb now.
THUMB(1: )
......@@ -77,13 +77,13 @@ ENTRY(stext)
orr r6, r6, #(1 << MPU_RSR_EN) @ Set region enabled bit
bl __setup_mpu
#endif
ldr r13, =__mmap_switched @ address to jump to after
@ initialising sctlr
adr lr, BSYM(1f) @ return (PIC) address
badr lr, 1f @ return (PIC) address
ldr r12, [r10, #PROCINFO_INITFUNC]
add r12, r12, r10
ret r12
1: b __after_proc_init
1: bl __after_proc_init
b __mmap_switched
ENDPROC(stext)
#ifdef CONFIG_SMP
......@@ -106,8 +106,7 @@ ENTRY(secondary_startup)
movs r10, r5 @ invalid processor?
beq __error_p @ yes, error 'p'
adr r4, __secondary_data
ldmia r4, {r7, r12}
ldr r7, __secondary_data
#ifdef CONFIG_ARM_MPU
/* Use MPU region info supplied by __cpu_up */
......@@ -115,23 +114,19 @@ ENTRY(secondary_startup)
bl __setup_mpu @ Initialize the MPU
#endif
adr lr, BSYM(__after_proc_init) @ return address
mov r13, r12 @ __secondary_switched address
badr lr, 1f @ return (PIC) address
ldr r12, [r10, #PROCINFO_INITFUNC]
add r12, r12, r10
ret r12
ENDPROC(secondary_startup)
ENTRY(__secondary_switched)
ldr sp, [r7, #8] @ set up the stack pointer
1: bl __after_proc_init
ldr sp, [r7, #12] @ set up the stack pointer
mov fp, #0
b secondary_start_kernel
ENDPROC(__secondary_switched)
ENDPROC(secondary_startup)
.type __secondary_data, %object
__secondary_data:
.long secondary_data
.long __secondary_switched
#endif /* CONFIG_SMP */
/*
......@@ -164,7 +159,7 @@ __after_proc_init:
#endif
mcr p15, 0, r0, c1, c0, 0 @ write control reg
#endif /* CONFIG_CPU_CP15 */
ret r13
ret lr
ENDPROC(__after_proc_init)
.ltorg
......
......@@ -80,7 +80,7 @@
ENTRY(stext)
ARM_BE8(setend be ) @ ensure we are in BE8 mode
THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM.
THUMB( badr r9, 1f ) @ Kernel is always entered in ARM.
THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
THUMB( .thumb ) @ switch to Thumb now.
THUMB(1: )
......@@ -131,13 +131,30 @@ ENTRY(stext)
* The following calls CPU specific code in a position independent
* manner. See arch/arm/mm/proc-*.S for details. r10 = base of
* xxx_proc_info structure selected by __lookup_processor_type
* above. On return, the CPU will be ready for the MMU to be
* turned on, and r0 will hold the CPU control register value.
* above.
*
* The processor init function will be called with:
* r1 - machine type
* r2 - boot data (atags/dt) pointer
* r4 - translation table base (low word)
* r5 - translation table base (high word, if LPAE)
* r8 - translation table base 1 (pfn if LPAE)
* r9 - cpuid
* r13 - virtual address for __enable_mmu -> __turn_mmu_on
*
* On return, the CPU will be ready for the MMU to be turned on,
* r0 will hold the CPU control register value, r1, r2, r4, and
* r9 will be preserved. r5 will also be preserved if LPAE.
*/
ldr r13, =__mmap_switched @ address to jump to after
@ mmu has been enabled
adr lr, BSYM(1f) @ return (PIC) address
badr lr, 1f @ return (PIC) address
#ifdef CONFIG_ARM_LPAE
mov r5, #0 @ high TTBR0
mov r8, r4, lsr #12 @ TTBR1 is swapper_pg_dir pfn
#else
mov r8, r4 @ set TTBR1 to swapper_pg_dir
#endif
ldr r12, [r10, #PROCINFO_INITFUNC]
add r12, r12, r10
ret r12
......@@ -158,7 +175,7 @@ ENDPROC(stext)
*
* Returns:
* r0, r3, r5-r7 corrupted
* r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h)
* r4 = physical page table address
*/
__create_page_tables:
pgtbl r4, r8 @ page table address
......@@ -333,7 +350,6 @@ __create_page_tables:
#endif
#ifdef CONFIG_ARM_LPAE
sub r4, r4, #0x1000 @ point to the PGD table
mov r4, r4, lsr #ARCH_PGD_SHIFT
#endif
ret lr
ENDPROC(__create_page_tables)
......@@ -346,9 +362,9 @@ __turn_mmu_on_loc:
#if defined(CONFIG_SMP)
.text
ENTRY(secondary_startup_arm)
.arm
THUMB( adr r9, BSYM(1f) ) @ Kernel is entered in ARM.
ENTRY(secondary_startup_arm)
THUMB( badr r9, 1f ) @ Kernel is entered in ARM.
THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
THUMB( .thumb ) @ switch to Thumb now.
THUMB(1: )
......@@ -381,10 +397,10 @@ ENTRY(secondary_startup)
adr r4, __secondary_data
ldmia r4, {r5, r7, r12} @ address to jump to after
sub lr, r4, r5 @ mmu has been enabled
ldr r4, [r7, lr] @ get secondary_data.pgdir
add r7, r7, #4
ldr r8, [r7, lr] @ get secondary_data.swapper_pg_dir
adr lr, BSYM(__enable_mmu) @ return address
add r3, r7, lr
ldrd r4, [r3, #0] @ get secondary_data.pgdir
ldr r8, [r3, #8] @ get secondary_data.swapper_pg_dir
badr lr, __enable_mmu @ return address
mov r13, r12 @ __secondary_switched address
ldr r12, [r10, #PROCINFO_INITFUNC]
add r12, r12, r10 @ initialise processor
......@@ -397,7 +413,7 @@ ENDPROC(secondary_startup_arm)
* r6 = &secondary_data
*/
ENTRY(__secondary_switched)
ldr sp, [r7, #4] @ get secondary_data.stack
ldr sp, [r7, #12] @ get secondary_data.stack
mov fp, #0
b secondary_start_kernel
ENDPROC(__secondary_switched)
......@@ -416,12 +432,14 @@ __secondary_data:
/*
* Setup common bits before finally enabling the MMU. Essentially
* this is just loading the page table pointer and domain access
* registers.
* registers. All these registers need to be preserved by the
* processor setup function (or set in the case of r0)
*
* r0 = cp#15 control register
* r1 = machine ID
* r2 = atags or dtb pointer
* r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h)
* r4 = TTBR pointer (low word)
* r5 = TTBR pointer (high word if LPAE)
* r9 = processor ID
* r13 = *virtual* address to jump to upon completion
*/
......@@ -440,7 +458,9 @@ __enable_mmu:
#ifdef CONFIG_CPU_ICACHE_DISABLE
bic r0, r0, #CR_I
#endif
#ifndef CONFIG_ARM_LPAE
#ifdef CONFIG_ARM_LPAE
mcrr p15, 0, r4, r5, c2 @ load TTBR0
#else
mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
......
/*
* Copyright (C) 2014 Linaro Ltd. <ard.biesheuvel@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/elf.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/cache.h>
#include <asm/opcodes.h>
#define PLT_ENT_STRIDE L1_CACHE_BYTES
#define PLT_ENT_COUNT (PLT_ENT_STRIDE / sizeof(u32))
#define PLT_ENT_SIZE (sizeof(struct plt_entries) / PLT_ENT_COUNT)
#ifdef CONFIG_THUMB2_KERNEL
#define PLT_ENT_LDR __opcode_to_mem_thumb32(0xf8dff000 | \
(PLT_ENT_STRIDE - 4))
#else
#define PLT_ENT_LDR __opcode_to_mem_arm(0xe59ff000 | \
(PLT_ENT_STRIDE - 8))
#endif
struct plt_entries {
u32 ldr[PLT_ENT_COUNT];
u32 lit[PLT_ENT_COUNT];
};
static bool in_init(const struct module *mod, u32 addr)
{
return addr - (u32)mod->module_init < mod->init_size;
}
u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
{
struct plt_entries *plt, *plt_end;
int c, *count;
if (in_init(mod, loc)) {
plt = (void *)mod->arch.init_plt->sh_addr;
plt_end = (void *)plt + mod->arch.init_plt->sh_size;
count = &mod->arch.init_plt_count;
} else {
plt = (void *)mod->arch.core_plt->sh_addr;
plt_end = (void *)plt + mod->arch.core_plt->sh_size;
count = &mod->arch.core_plt_count;
}
/* Look for an existing entry pointing to 'val' */
for (c = *count; plt < plt_end; c -= PLT_ENT_COUNT, plt++) {
int i;
if (!c) {
/* Populate a new set of entries */
*plt = (struct plt_entries){
{ [0 ... PLT_ENT_COUNT - 1] = PLT_ENT_LDR, },
{ val, }
};
++*count;
return (u32)plt->ldr;
}
for (i = 0; i < PLT_ENT_COUNT; i++) {
if (!plt->lit[i]) {
plt->lit[i] = val;
++*count;
}
if (plt->lit[i] == val)
return (u32)&plt->ldr[i];
}
}
BUG();
}
static int duplicate_rel(Elf32_Addr base, const Elf32_Rel *rel, int num,
u32 mask)
{
u32 *loc1, *loc2;
int i;
for (i = 0; i < num; i++) {
if (rel[i].r_info != rel[num].r_info)
continue;
/*
* Identical relocation types against identical symbols can
* still result in different PLT entries if the addend in the
* place is different. So resolve the target of the relocation
* to compare the values.
*/
loc1 = (u32 *)(base + rel[i].r_offset);
loc2 = (u32 *)(base + rel[num].r_offset);
if (((*loc1 ^ *loc2) & mask) == 0)
return 1;
}
return 0;
}
/* Count how many PLT entries we may need */
static unsigned int count_plts(Elf32_Addr base, const Elf32_Rel *rel, int num)
{
unsigned int ret = 0;
int i;
/*
* Sure, this is order(n^2), but it's usually short, and not
* time critical
*/
for (i = 0; i < num; i++)
switch (ELF32_R_TYPE(rel[i].r_info)) {
case R_ARM_CALL:
case R_ARM_PC24:
case R_ARM_JUMP24:
if (!duplicate_rel(base, rel, i,
__opcode_to_mem_arm(0x00ffffff)))
ret++;
break;
#ifdef CONFIG_THUMB2_KERNEL
case R_ARM_THM_CALL:
case R_ARM_THM_JUMP24:
if (!duplicate_rel(base, rel, i,
__opcode_to_mem_thumb32(0x07ff2fff)))
ret++;
#endif
}
return ret;
}
int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
char *secstrings, struct module *mod)
{
unsigned long core_plts = 0, init_plts = 0;
Elf32_Shdr *s, *sechdrs_end = sechdrs + ehdr->e_shnum;
/*
* To store the PLTs, we expand the .text section for core module code
* and the .init.text section for initialization code.
*/
for (s = sechdrs; s < sechdrs_end; ++s)
if (strcmp(".core.plt", secstrings + s->sh_name) == 0)
mod->arch.core_plt = s;
else if (strcmp(".init.plt", secstrings + s->sh_name) == 0)
mod->arch.init_plt = s;
if (!mod->arch.core_plt || !mod->arch.init_plt) {
pr_err("%s: sections missing\n", mod->name);
return -ENOEXEC;
}
for (s = sechdrs + 1; s < sechdrs_end; ++s) {
const Elf32_Rel *rels = (void *)ehdr + s->sh_offset;
int numrels = s->sh_size / sizeof(Elf32_Rel);
Elf32_Shdr *dstsec = sechdrs + s->sh_info;
if (s->sh_type != SHT_REL)
continue;
if (strstr(secstrings + s->sh_name, ".init"))
init_plts += count_plts(dstsec->sh_addr, rels, numrels);
else
core_plts += count_plts(dstsec->sh_addr, rels, numrels);
}
mod->arch.core_plt->sh_type = SHT_NOBITS;
mod->arch.core_plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
mod->arch.core_plt->sh_addralign = L1_CACHE_BYTES;
mod->arch.core_plt->sh_size = round_up(core_plts * PLT_ENT_SIZE,
sizeof(struct plt_entries));
mod->arch.core_plt_count = 0;
mod->arch.init_plt->sh_type = SHT_NOBITS;
mod->arch.init_plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
mod->arch.init_plt->sh_addralign = L1_CACHE_BYTES;
mod->arch.init_plt->sh_size = round_up(init_plts * PLT_ENT_SIZE,
sizeof(struct plt_entries));
mod->arch.init_plt_count = 0;
pr_debug("%s: core.plt=%x, init.plt=%x\n", __func__,
mod->arch.core_plt->sh_size, mod->arch.init_plt->sh_size);
return 0;
}
......@@ -40,7 +40,12 @@
#ifdef CONFIG_MMU
void *module_alloc(unsigned long size)
{
return __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END,
void *p = __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END,
GFP_KERNEL, PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE,
__builtin_return_address(0));
if (!IS_ENABLED(CONFIG_ARM_MODULE_PLTS) || p)
return p;
return __vmalloc_node_range(size, 1, VMALLOC_START, VMALLOC_END,
GFP_KERNEL, PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE,
__builtin_return_address(0));
}
......@@ -110,6 +115,20 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
offset -= 0x04000000;
offset += sym->st_value - loc;
/*
* Route through a PLT entry if 'offset' exceeds the
* supported range. Note that 'offset + loc + 8'
* contains the absolute jump target, i.e.,
* @sym + addend, corrected for the +8 PC bias.
*/
if (IS_ENABLED(CONFIG_ARM_MODULE_PLTS) &&
(offset <= (s32)0xfe000000 ||
offset >= (s32)0x02000000))
offset = get_module_plt(module, loc,
offset + loc + 8)
- loc - 8;
if (offset <= (s32)0xfe000000 ||
offset >= (s32)0x02000000) {
pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
......@@ -203,6 +222,17 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
offset -= 0x02000000;
offset += sym->st_value - loc;
/*
* Route through a PLT entry if 'offset' exceeds the
* supported range.
*/
if (IS_ENABLED(CONFIG_ARM_MODULE_PLTS) &&
(offset <= (s32)0xff000000 ||
offset >= (s32)0x01000000))
offset = get_module_plt(module, loc,
offset + loc + 4)
- loc - 4;
if (offset <= (s32)0xff000000 ||
offset >= (s32)0x01000000) {
pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
......
SECTIONS {
.core.plt : { BYTE(0) }
.init.plt : { BYTE(0) }
}
This diff is collapsed.
This diff is collapsed.
......@@ -31,6 +31,14 @@
*/
#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
#include <asm/cputype.h>
#include <asm/irq_regs.h>
#include <asm/pmu.h>
#include <linux/of.h>
#include <linux/platform_device.h>
enum armv6_perf_types {
ARMV6_PERFCTR_ICACHE_MISS = 0x0,
ARMV6_PERFCTR_IBUF_STALL = 0x1,
......@@ -543,24 +551,39 @@ static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
return 0;
}
#else
static int armv6_1136_pmu_init(struct arm_pmu *cpu_pmu)
{
return -ENODEV;
}
static int armv6_1156_pmu_init(struct arm_pmu *cpu_pmu)
{
return -ENODEV;
}
static struct of_device_id armv6_pmu_of_device_ids[] = {
{.compatible = "arm,arm11mpcore-pmu", .data = armv6mpcore_pmu_init},
{.compatible = "arm,arm1176-pmu", .data = armv6_1176_pmu_init},
{.compatible = "arm,arm1136-pmu", .data = armv6_1136_pmu_init},
{ /* sentinel value */ }
};
static int armv6_1176_pmu_init(struct arm_pmu *cpu_pmu)
static const struct pmu_probe_info armv6_pmu_probe_table[] = {
ARM_PMU_PROBE(ARM_CPU_PART_ARM1136, armv6_1136_pmu_init),
ARM_PMU_PROBE(ARM_CPU_PART_ARM1156, armv6_1156_pmu_init),
ARM_PMU_PROBE(ARM_CPU_PART_ARM1176, armv6_1176_pmu_init),
ARM_PMU_PROBE(ARM_CPU_PART_ARM11MPCORE, armv6mpcore_pmu_init),
{ /* sentinel value */ }
};
static int armv6_pmu_device_probe(struct platform_device *pdev)
{
return -ENODEV;
return arm_pmu_device_probe(pdev, armv6_pmu_of_device_ids,
armv6_pmu_probe_table);
}
static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
static struct platform_driver armv6_pmu_driver = {
.driver = {
.name = "armv6-pmu",
.of_match_table = armv6_pmu_of_device_ids,
},
.probe = armv6_pmu_device_probe,
};
static int __init register_armv6_pmu_driver(void)
{
return -ENODEV;
return platform_driver_register(&armv6_pmu_driver);
}
device_initcall(register_armv6_pmu_driver);
#endif /* CONFIG_CPU_V6 || CONFIG_CPU_V6K */
......@@ -19,9 +19,15 @@
#ifdef CONFIG_CPU_V7
#include <asm/cp15.h>
#include <asm/cputype.h>
#include <asm/irq_regs.h>
#include <asm/pmu.h>
#include <asm/vfp.h>
#include "../vfp/vfpinstr.h"
#include <linux/of.h>
#include <linux/platform_device.h>
/*
* Common ARMv7 event types
*
......@@ -1056,15 +1062,22 @@ static void armv7pmu_init(struct arm_pmu *cpu_pmu)
cpu_pmu->max_period = (1LLU << 32) - 1;
};
static u32 armv7_read_num_pmnc_events(void)
static void armv7_read_num_pmnc_events(void *info)
{
u32 nb_cnt;
int *nb_cnt = info;
/* Read the nb of CNTx counters supported from PMNC */
nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
*nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
/* Add the CPU cycles counter and return */
return nb_cnt + 1;
/* Add the CPU cycles counter */
*nb_cnt += 1;
}
static int armv7_probe_num_events(struct arm_pmu *arm_pmu)
{
return smp_call_function_any(&arm_pmu->supported_cpus,
armv7_read_num_pmnc_events,
&arm_pmu->num_events, 1);
}
static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
......@@ -1072,8 +1085,7 @@ static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "armv7_cortex_a8";
cpu_pmu->map_event = armv7_a8_map_event;
cpu_pmu->num_events = armv7_read_num_pmnc_events();
return 0;
return armv7_probe_num_events(cpu_pmu);
}
static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
......@@ -1081,8 +1093,7 @@ static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "armv7_cortex_a9";
cpu_pmu->map_event = armv7_a9_map_event;
cpu_pmu->num_events = armv7_read_num_pmnc_events();
return 0;
return armv7_probe_num_events(cpu_pmu);
}
static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
......@@ -1090,8 +1101,7 @@ static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "armv7_cortex_a5";
cpu_pmu->map_event = armv7_a5_map_event;
cpu_pmu->num_events = armv7_read_num_pmnc_events();
return 0;
return armv7_probe_num_events(cpu_pmu);
}
static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
......@@ -1099,9 +1109,8 @@ static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "armv7_cortex_a15";
cpu_pmu->map_event = armv7_a15_map_event;
cpu_pmu->num_events = armv7_read_num_pmnc_events();
cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
return 0;
return armv7_probe_num_events(cpu_pmu);
}
static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
......@@ -1109,9 +1118,8 @@ static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "armv7_cortex_a7";
cpu_pmu->map_event = armv7_a7_map_event;
cpu_pmu->num_events = armv7_read_num_pmnc_events();
cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
return 0;
return armv7_probe_num_events(cpu_pmu);
}
static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu)
......@@ -1119,16 +1127,15 @@ static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu)
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "armv7_cortex_a12";
cpu_pmu->map_event = armv7_a12_map_event;
cpu_pmu->num_events = armv7_read_num_pmnc_events();
cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
return 0;
return armv7_probe_num_events(cpu_pmu);
}
static int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu)
{
armv7_a12_pmu_init(cpu_pmu);
int ret = armv7_a12_pmu_init(cpu_pmu);
cpu_pmu->name = "armv7_cortex_a17";
return 0;
return ret;
}
/*
......@@ -1508,14 +1515,13 @@ static int krait_pmu_init(struct arm_pmu *cpu_pmu)
cpu_pmu->map_event = krait_map_event_no_branch;
else
cpu_pmu->map_event = krait_map_event;
cpu_pmu->num_events = armv7_read_num_pmnc_events();
cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
cpu_pmu->reset = krait_pmu_reset;
cpu_pmu->enable = krait_pmu_enable_event;
cpu_pmu->disable = krait_pmu_disable_event;
cpu_pmu->get_event_idx = krait_pmu_get_event_idx;
cpu_pmu->clear_event_idx = krait_pmu_clear_event_idx;
return 0;
return armv7_probe_num_events(cpu_pmu);
}
/*
......@@ -1833,13 +1839,12 @@ static int scorpion_pmu_init(struct arm_pmu *cpu_pmu)
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "armv7_scorpion";
cpu_pmu->map_event = scorpion_map_event;
cpu_pmu->num_events = armv7_read_num_pmnc_events();
cpu_pmu->reset = scorpion_pmu_reset;
cpu_pmu->enable = scorpion_pmu_enable_event;
cpu_pmu->disable = scorpion_pmu_disable_event;
cpu_pmu->get_event_idx = scorpion_pmu_get_event_idx;
cpu_pmu->clear_event_idx = scorpion_pmu_clear_event_idx;
return 0;
return armv7_probe_num_events(cpu_pmu);
}
static int scorpion_mp_pmu_init(struct arm_pmu *cpu_pmu)
......@@ -1847,62 +1852,52 @@ static int scorpion_mp_pmu_init(struct arm_pmu *cpu_pmu)
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "armv7_scorpion_mp";
cpu_pmu->map_event = scorpion_map_event;
cpu_pmu->num_events = armv7_read_num_pmnc_events();
cpu_pmu->reset = scorpion_pmu_reset;
cpu_pmu->enable = scorpion_pmu_enable_event;
cpu_pmu->disable = scorpion_pmu_disable_event;
cpu_pmu->get_event_idx = scorpion_pmu_get_event_idx;
cpu_pmu->clear_event_idx = scorpion_pmu_clear_event_idx;
return 0;
}
#else
static inline int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
{
return -ENODEV;
}
static inline int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
{
return -ENODEV;
}
static inline int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
{
return -ENODEV;
}
static inline int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
{
return -ENODEV;
}
static inline int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
{
return -ENODEV;
}
return armv7_probe_num_events(cpu_pmu);
}
static const struct of_device_id armv7_pmu_of_device_ids[] = {
{.compatible = "arm,cortex-a17-pmu", .data = armv7_a17_pmu_init},
{.compatible = "arm,cortex-a15-pmu", .data = armv7_a15_pmu_init},
{.compatible = "arm,cortex-a12-pmu", .data = armv7_a12_pmu_init},
{.compatible = "arm,cortex-a9-pmu", .data = armv7_a9_pmu_init},
{.compatible = "arm,cortex-a8-pmu", .data = armv7_a8_pmu_init},
{.compatible = "arm,cortex-a7-pmu", .data = armv7_a7_pmu_init},
{.compatible = "arm,cortex-a5-pmu", .data = armv7_a5_pmu_init},
{.compatible = "qcom,krait-pmu", .data = krait_pmu_init},
{.compatible = "qcom,scorpion-pmu", .data = scorpion_pmu_init},
{.compatible = "qcom,scorpion-mp-pmu", .data = scorpion_mp_pmu_init},
{},
};
static inline int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu)
{
return -ENODEV;
}
static const struct pmu_probe_info armv7_pmu_probe_table[] = {
ARM_PMU_PROBE(ARM_CPU_PART_CORTEX_A8, armv7_a8_pmu_init),
ARM_PMU_PROBE(ARM_CPU_PART_CORTEX_A9, armv7_a9_pmu_init),
{ /* sentinel value */ }
};
static inline int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu)
{
return -ENODEV;
}
static inline int krait_pmu_init(struct arm_pmu *cpu_pmu)
static int armv7_pmu_device_probe(struct platform_device *pdev)
{
return -ENODEV;
return arm_pmu_device_probe(pdev, armv7_pmu_of_device_ids,
armv7_pmu_probe_table);
}
static inline int scorpion_pmu_init(struct arm_pmu *cpu_pmu)
{
return -ENODEV;
}
static struct platform_driver armv7_pmu_driver = {
.driver = {
.name = "armv7-pmu",
.of_match_table = armv7_pmu_of_device_ids,
},
.probe = armv7_pmu_device_probe,
};
static inline int scorpion_mp_pmu_init(struct arm_pmu *cpu_pmu)
static int __init register_armv7_pmu_driver(void)
{
return -ENODEV;
return platform_driver_register(&armv7_pmu_driver);
}
device_initcall(register_armv7_pmu_driver);
#endif /* CONFIG_CPU_V7 */
......@@ -13,6 +13,14 @@
*/
#ifdef CONFIG_CPU_XSCALE
#include <asm/cputype.h>
#include <asm/irq_regs.h>
#include <asm/pmu.h>
#include <linux/of.h>
#include <linux/platform_device.h>
enum xscale_perf_types {
XSCALE_PERFCTR_ICACHE_MISS = 0x00,
XSCALE_PERFCTR_ICACHE_NO_DELIVER = 0x01,
......@@ -740,14 +748,28 @@ static int xscale2pmu_init(struct arm_pmu *cpu_pmu)
return 0;
}
#else
static inline int xscale1pmu_init(struct arm_pmu *cpu_pmu)
static const struct pmu_probe_info xscale_pmu_probe_table[] = {
XSCALE_PMU_PROBE(ARM_CPU_XSCALE_ARCH_V1, xscale1pmu_init),
XSCALE_PMU_PROBE(ARM_CPU_XSCALE_ARCH_V2, xscale2pmu_init),
{ /* sentinel value */ }
};
static int xscale_pmu_device_probe(struct platform_device *pdev)
{
return -ENODEV;
return arm_pmu_device_probe(pdev, NULL, xscale_pmu_probe_table);
}
static inline int xscale2pmu_init(struct arm_pmu *cpu_pmu)
static struct platform_driver xscale_pmu_driver = {
.driver = {
.name = "xscale-pmu",
},
.probe = xscale_pmu_device_probe,
};
static int __init register_xscale_pmu_driver(void)
{
return -ENODEV;
return platform_driver_register(&xscale_pmu_driver);
}
device_initcall(register_xscale_pmu_driver);
#endif /* CONFIG_CPU_XSCALE */
......@@ -75,8 +75,7 @@ __setup("fpe=", fpe_setup);
extern void init_default_cache_policy(unsigned long);
extern void paging_init(const struct machine_desc *desc);
extern void early_paging_init(const struct machine_desc *,
struct proc_info_list *);
extern void early_paging_init(const struct machine_desc *);
extern void sanity_check_meminfo(void);
extern enum reboot_mode reboot_mode;
extern void setup_dma_zone(const struct machine_desc *desc);
......@@ -93,6 +92,9 @@ unsigned int __atags_pointer __initdata;
unsigned int system_rev;
EXPORT_SYMBOL(system_rev);
const char *system_serial;
EXPORT_SYMBOL(system_serial);
unsigned int system_serial_low;
EXPORT_SYMBOL(system_serial_low);
......@@ -839,8 +841,25 @@ arch_initcall(customize_machine);
static int __init init_machine_late(void)
{
struct device_node *root;
int ret;
if (machine_desc->init_late)
machine_desc->init_late();
root = of_find_node_by_path("/");
if (root) {
ret = of_property_read_string(root, "serial-number",
&system_serial);
if (ret)
system_serial = NULL;
}
if (!system_serial)
system_serial = kasprintf(GFP_KERNEL, "%08x%08x",
system_serial_high,
system_serial_low);
return 0;
}
late_initcall(init_machine_late);
......@@ -936,7 +955,9 @@ void __init setup_arch(char **cmdline_p)
parse_early_param();
early_paging_init(mdesc, lookup_processor_type(read_cpuid_id()));
#ifdef CONFIG_MMU
early_paging_init(mdesc);
#endif
setup_dma_zone(mdesc);
sanity_check_meminfo();
arm_memblock_init(mdesc);
......@@ -1109,8 +1130,7 @@ static int c_show(struct seq_file *m, void *v)
seq_printf(m, "Hardware\t: %s\n", machine_name);
seq_printf(m, "Revision\t: %04x\n", system_rev);
seq_printf(m, "Serial\t\t: %08x%08x\n",
system_serial_high, system_serial_low);
seq_printf(m, "Serial\t\t: %s\n", system_serial);
return 0;
}
......
......@@ -81,7 +81,7 @@ ENTRY(__cpu_suspend)
mov r1, r4 @ size of save block
add r0, sp, #8 @ pointer to save block
bl __cpu_suspend_save
adr lr, BSYM(cpu_suspend_abort)
badr lr, cpu_suspend_abort
ldmfd sp!, {r0, pc} @ call suspend fn
ENDPROC(__cpu_suspend)
.ltorg
......@@ -122,7 +122,7 @@ ENDPROC(cpu_resume_after_mmu)
#ifdef CONFIG_MMU
.arm
ENTRY(cpu_resume_arm)
THUMB( adr r9, BSYM(1f) ) @ Kernel is entered in ARM.
THUMB( badr r9, 1f ) @ Kernel is entered in ARM.
THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
THUMB( .thumb ) @ switch to Thumb now.
THUMB(1: )
......
......@@ -86,9 +86,11 @@ void __init smp_set_ops(struct smp_operations *ops)
static unsigned long get_arch_pgd(pgd_t *pgd)
{
phys_addr_t pgdir = virt_to_idmap(pgd);
BUG_ON(pgdir & ARCH_PGD_MASK);
return pgdir >> ARCH_PGD_SHIFT;
#ifdef CONFIG_ARM_LPAE
return __phys_to_pfn(virt_to_phys(pgd));
#else
return virt_to_phys(pgd);
#endif
}
int __cpu_up(unsigned int cpu, struct task_struct *idle)
......@@ -108,7 +110,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
#endif
#ifdef CONFIG_MMU
secondary_data.pgdir = get_arch_pgd(idmap_pgd);
secondary_data.pgdir = virt_to_phys(idmap_pgd);
secondary_data.swapper_pg_dir = get_arch_pgd(swapper_pg_dir);
#endif
sync_cache_w(&secondary_data);
......
......@@ -17,6 +17,9 @@
#include <asm/mach/map.h>
#include <asm/memory.h>
#include <asm/system_info.h>
#include <asm/traps.h>
#define TCMTR_FORMAT_MASK 0xe0000000U
static struct gen_pool *tcm_pool;
static bool dtcm_present;
......@@ -175,6 +178,77 @@ static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks,
return 0;
}
/*
* When we are running in the non-secure world and the secure world
* has not explicitly given us access to the TCM we will get an
* undefined error when reading the TCM region register in the
* setup_tcm_bank function (above).
*
* There are two variants of this register read that we need to trap,
* the read for the data TCM and the read for the instruction TCM:
* c0370628: ee196f11 mrc 15, 0, r6, cr9, cr1, {0}
* c0370674: ee196f31 mrc 15, 0, r6, cr9, cr1, {1}
*
* Our undef hook mask explicitly matches all fields of the encoded
* instruction other than the destination register. The mask also
* only allows operand 2 to have the values 0 or 1.
*
* The undefined hook is defined as __init and __initdata, and therefore
* must be removed before tcm_init returns.
*
* In this particular case (MRC with ARM condition code ALways) the
* Thumb-2 and ARM instruction encoding are identical, so this hook
* will work on a Thumb-2 kernel.
*
* See A8.8.107, DDI0406C_C ARM Architecture Reference Manual, Encoding
* T1/A1 for the bit-by-bit details.
*
* mrc p15, 0, XX, c9, c1, 0
* mrc p15, 0, XX, c9, c1, 1
* | | | | | | | +---- opc2 0|1 = 000|001
* | | | | | | +------- CRm 0 = 0001
* | | | | | +----------- CRn 0 = 1001
* | | | | +--------------- Rt ? = ????
* | | | +------------------- opc1 0 = 000
* | | +----------------------- coproc 15 = 1111
* | +-------------------------- condition ALways = 1110
* +----------------------------- instruction MRC = 1110
*
* Encoding this as per A8.8.107 of DDI0406C, Encoding T1/A1, yields:
* 1111 1111 1111 1111 0000 1111 1101 1111 Required Mask
* 1110 1110 0001 1001 ???? 1111 0001 0001 mrc p15, 0, XX, c9, c1, 0
* 1110 1110 0001 1001 ???? 1111 0011 0001 mrc p15, 0, XX, c9, c1, 1
* [ ] [ ] [ ]| [ ] [ ] [ ] [ ]| +--- CRm
* | | | | | | | | +----- SBO
* | | | | | | | +------- opc2
* | | | | | | +----------- coproc
* | | | | | +---------------- Rt
* | | | | +--------------------- CRn
* | | | +------------------------- SBO
* | | +--------------------------- opc1
* | +------------------------------- instruction
* +------------------------------------ condition
*/
#define TCM_REGION_READ_MASK 0xffff0fdf
#define TCM_REGION_READ_INSTR 0xee190f11
#define DEST_REG_SHIFT 12
#define DEST_REG_MASK 0xf
static int __init tcm_handler(struct pt_regs *regs, unsigned int instr)
{
regs->uregs[(instr >> DEST_REG_SHIFT) & DEST_REG_MASK] = 0;
regs->ARM_pc += 4;
return 0;
}
static struct undef_hook tcm_hook __initdata = {
.instr_mask = TCM_REGION_READ_MASK,
.instr_val = TCM_REGION_READ_INSTR,
.cpsr_mask = MODE_MASK,
.cpsr_val = SVC_MODE,
.fn = tcm_handler
};
/*
* This initializes the TCM memory
*/
......@@ -204,9 +278,18 @@ void __init tcm_init(void)
}
tcm_status = read_cpuid_tcmstatus();
/*
* This code only supports v6-compatible TCMTR implementations.
*/
if (tcm_status & TCMTR_FORMAT_MASK)
return;
dtcm_banks = (tcm_status >> 16) & 0x03;
itcm_banks = (tcm_status & 0x03);
register_undef_hook(&tcm_hook);
/* Values greater than 2 for D/ITCM banks are "reserved" */
if (dtcm_banks > 2)
dtcm_banks = 0;
......@@ -218,7 +301,7 @@ void __init tcm_init(void)
for (i = 0; i < dtcm_banks; i++) {
ret = setup_tcm_bank(0, i, dtcm_banks, &dtcm_end);
if (ret)
return;
goto unregister;
}
/* This means you compiled more code than fits into DTCM */
if (dtcm_code_sz > (dtcm_end - DTCM_OFFSET)) {
......@@ -227,6 +310,12 @@ void __init tcm_init(void)
dtcm_code_sz, (dtcm_end - DTCM_OFFSET));
goto no_dtcm;
}
/*
* This means that the DTCM sizes were 0 or the DTCM banks
* were inaccessible due to TrustZone configuration.
*/
if (!(dtcm_end - DTCM_OFFSET))
goto no_dtcm;
dtcm_res.end = dtcm_end - 1;
request_resource(&iomem_resource, &dtcm_res);
dtcm_iomap[0].length = dtcm_end - DTCM_OFFSET;
......@@ -250,15 +339,21 @@ void __init tcm_init(void)
for (i = 0; i < itcm_banks; i++) {
ret = setup_tcm_bank(1, i, itcm_banks, &itcm_end);
if (ret)
return;
goto unregister;
}
/* This means you compiled more code than fits into ITCM */
if (itcm_code_sz > (itcm_end - ITCM_OFFSET)) {
pr_info("CPU ITCM: %u bytes of code compiled to "
"ITCM but only %lu bytes of ITCM present\n",
itcm_code_sz, (itcm_end - ITCM_OFFSET));
return;
goto unregister;
}
/*
* This means that the ITCM sizes were 0 or the ITCM banks
* were inaccessible due to TrustZone configuration.
*/
if (!(itcm_end - ITCM_OFFSET))
goto unregister;
itcm_res.end = itcm_end - 1;
request_resource(&iomem_resource, &itcm_res);
itcm_iomap[0].length = itcm_end - ITCM_OFFSET;
......@@ -275,6 +370,9 @@ void __init tcm_init(void)
pr_info("CPU ITCM: %u bytes of code compiled to ITCM but no "
"ITCM banks present in CPU\n", itcm_code_sz);
}
unregister:
unregister_undef_hook(&tcm_hook);
}
/*
......
......@@ -749,14 +749,6 @@ late_initcall(arm_mrc_hook_init);
#endif
void __bad_xchg(volatile void *ptr, int size)
{
pr_err("xchg: bad data size: pc 0x%p, ptr 0x%p, size %d\n",
__builtin_return_address(0), ptr, size);
BUG();
}
EXPORT_SYMBOL(__bad_xchg);
/*
* A data abort trap was taken, but we did not handle the instruction.
* Try to abort the user program, or panic if it was the kernel.
......
......@@ -307,7 +307,7 @@ ENTRY(kvm_call_hyp)
THUMB( orr r2, r2, #PSR_T_BIT )
msr spsr_cxsf, r2
mrs r1, ELR_hyp
ldr r2, =BSYM(panic)
ldr r2, =panic
msr ELR_hyp, r2
ldr r0, =\panic_str
clrex @ Clear exclusive monitor
......
......@@ -35,7 +35,7 @@ ENTRY(call_with_stack)
mov r2, r0
mov r0, r1
adr lr, BSYM(1f)
badr lr, 1f
ret r2
1: ldr lr, [sp]
......
......@@ -311,13 +311,7 @@ static int exynos5420_cpu_suspend(unsigned long arg)
if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) {
mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
/*
* Residency value passed to mcpm_cpu_suspend back-end
* has to be given clear semantics. Set to 0 as a
* temporary value.
*/
mcpm_cpu_suspend(0);
mcpm_cpu_suspend();
}
pr_info("Failed to suspend the system\n");
......
......@@ -6,6 +6,8 @@
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/memblock.h>
......@@ -13,7 +15,9 @@
#include <asm/cputype.h>
#include <asm/cp15.h>
#include <asm/mcpm.h>
#include <asm/cacheflush.h>
#include <asm/smp.h>
#include <asm/smp_plat.h>
#include "core.h"
......@@ -94,11 +98,16 @@ static void hip04_set_snoop_filter(unsigned int cluster, unsigned int on)
} while (data != readl_relaxed(fabric + FAB_SF_MODE));
}
static int hip04_mcpm_power_up(unsigned int cpu, unsigned int cluster)
static int hip04_boot_secondary(unsigned int l_cpu, struct task_struct *idle)
{
unsigned int mpidr, cpu, cluster;
unsigned long data;
void __iomem *sys_dreq, *sys_status;
mpidr = cpu_logical_map(l_cpu);
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
if (!sysctrl)
return -ENODEV;
if (cluster >= HIP04_MAX_CLUSTERS || cpu >= HIP04_MAX_CPUS_PER_CLUSTER)
......@@ -118,6 +127,7 @@ static int hip04_mcpm_power_up(unsigned int cpu, unsigned int cluster)
cpu_relax();
data = readl_relaxed(sys_status);
} while (data & CLUSTER_DEBUG_RESET_STATUS);
hip04_set_snoop_filter(cluster, 1);
}
data = CORE_RESET_BIT(cpu) | NEON_RESET_BIT(cpu) | \
......@@ -126,11 +136,15 @@ static int hip04_mcpm_power_up(unsigned int cpu, unsigned int cluster)
do {
cpu_relax();
} while (data == readl_relaxed(sys_status));
/*
* We may fail to power up core again without this delay.
* It's not mentioned in document. It's found by test.
*/
udelay(20);
arch_send_wakeup_ipi_mask(cpumask_of(l_cpu));
out:
hip04_cpu_table[cluster][cpu]++;
spin_unlock_irq(&boot_lock);
......@@ -138,31 +152,30 @@ static int hip04_mcpm_power_up(unsigned int cpu, unsigned int cluster)
return 0;
}
static void hip04_mcpm_power_down(void)
#ifdef CONFIG_HOTPLUG_CPU
static void hip04_cpu_die(unsigned int l_cpu)
{
unsigned int mpidr, cpu, cluster;
bool skip_wfi = false, last_man = false;
bool last_man;
mpidr = read_cpuid_mpidr();
mpidr = cpu_logical_map(l_cpu);
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
__mcpm_cpu_going_down(cpu, cluster);
spin_lock(&boot_lock);
BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
hip04_cpu_table[cluster][cpu]--;
if (hip04_cpu_table[cluster][cpu] == 1) {
/* A power_up request went ahead of us. */
skip_wfi = true;
spin_unlock(&boot_lock);
return;
} else if (hip04_cpu_table[cluster][cpu] > 1) {
pr_err("Cluster %d CPU%d boots multiple times\n", cluster, cpu);
BUG();
}
last_man = hip04_cluster_is_down(cluster);
if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
spin_unlock(&boot_lock);
if (last_man) {
/* Since it's Cortex A15, disable L2 prefetching. */
asm volatile(
"mcr p15, 1, %0, c15, c0, 3 \n\t"
......@@ -170,34 +183,30 @@ static void hip04_mcpm_power_down(void)
"dsb "
: : "r" (0x400) );
v7_exit_coherency_flush(all);
hip04_set_snoop_filter(cluster, 0);
__mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
} else {
spin_unlock(&boot_lock);
v7_exit_coherency_flush(louis);
}
__mcpm_cpu_down(cpu, cluster);
if (!skip_wfi)
for (;;)
wfi();
}
static int hip04_mcpm_wait_for_powerdown(unsigned int cpu, unsigned int cluster)
static int hip04_cpu_kill(unsigned int l_cpu)
{
unsigned int mpidr, cpu, cluster;
unsigned int data, tries, count;
int ret = -ETIMEDOUT;
mpidr = cpu_logical_map(l_cpu);
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
BUG_ON(cluster >= HIP04_MAX_CLUSTERS ||
cpu >= HIP04_MAX_CPUS_PER_CLUSTER);
count = TIMEOUT_MSEC / POLL_MSEC;
spin_lock_irq(&boot_lock);
for (tries = 0; tries < count; tries++) {
if (hip04_cpu_table[cluster][cpu]) {
ret = -EBUSY;
if (hip04_cpu_table[cluster][cpu])
goto err;
}
cpu_relax();
data = readl_relaxed(sysctrl + SC_CPU_RESET_STATUS(cluster));
if (data & CORE_WFI_STATUS(cpu))
......@@ -220,64 +229,22 @@ static int hip04_mcpm_wait_for_powerdown(unsigned int cpu, unsigned int cluster)
}
if (tries >= count)
goto err;
if (hip04_cluster_is_down(cluster))
hip04_set_snoop_filter(cluster, 0);
spin_unlock_irq(&boot_lock);
return 0;
return 1;
err:
spin_unlock_irq(&boot_lock);
return ret;
}
static void hip04_mcpm_powered_up(void)
{
unsigned int mpidr, cpu, cluster;
mpidr = read_cpuid_mpidr();
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
spin_lock(&boot_lock);
if (!hip04_cpu_table[cluster][cpu])
hip04_cpu_table[cluster][cpu] = 1;
spin_unlock(&boot_lock);
}
static void __naked hip04_mcpm_power_up_setup(unsigned int affinity_level)
{
asm volatile (" \n"
" cmp r0, #0 \n"
" bxeq lr \n"
/* calculate fabric phys address */
" adr r2, 2f \n"
" ldmia r2, {r1, r3} \n"
" sub r0, r2, r1 \n"
" ldr r2, [r0, r3] \n"
/* get cluster id from MPIDR */
" mrc p15, 0, r0, c0, c0, 5 \n"
" ubfx r1, r0, #8, #8 \n"
/* 1 << cluster id */
" mov r0, #1 \n"
" mov r3, r0, lsl r1 \n"
" ldr r0, [r2, #"__stringify(FAB_SF_MODE)"] \n"
" tst r0, r3 \n"
" bxne lr \n"
" orr r1, r0, r3 \n"
" str r1, [r2, #"__stringify(FAB_SF_MODE)"] \n"
"1: ldr r0, [r2, #"__stringify(FAB_SF_MODE)"] \n"
" tst r0, r3 \n"
" beq 1b \n"
" bx lr \n"
" .align 2 \n"
"2: .word . \n"
" .word fabric_phys_addr \n"
);
return 0;
}
static const struct mcpm_platform_ops hip04_mcpm_ops = {
.power_up = hip04_mcpm_power_up,
.power_down = hip04_mcpm_power_down,
.wait_for_powerdown = hip04_mcpm_wait_for_powerdown,
.powered_up = hip04_mcpm_powered_up,
#endif
static struct smp_operations __initdata hip04_smp_ops = {
.smp_boot_secondary = hip04_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = hip04_cpu_die,
.cpu_kill = hip04_cpu_kill,
#endif
};
static bool __init hip04_cpu_table_init(void)
......@@ -298,7 +265,7 @@ static bool __init hip04_cpu_table_init(void)
return true;
}
static int __init hip04_mcpm_init(void)
static int __init hip04_smp_init(void)
{
struct device_node *np, *np_sctl, *np_fab;
struct resource fab_res;
......@@ -353,10 +320,6 @@ static int __init hip04_mcpm_init(void)
ret = -EINVAL;
goto err_table;
}
ret = mcpm_platform_register(&hip04_mcpm_ops);
if (ret) {
goto err_table;
}
/*
* Fill the instruction address that is used after secondary core
......@@ -364,13 +327,11 @@ static int __init hip04_mcpm_init(void)
*/
writel_relaxed(hip04_boot_method[0], relocation);
writel_relaxed(0xa5a5a5a5, relocation + 4); /* magic number */
writel_relaxed(virt_to_phys(mcpm_entry_point), relocation + 8);
writel_relaxed(virt_to_phys(secondary_startup), relocation + 8);
writel_relaxed(0, relocation + 12);
iounmap(relocation);
mcpm_sync_init(hip04_mcpm_power_up_setup);
mcpm_smp_set_ops();
pr_info("HiP04 MCPM initialized\n");
smp_set_ops(&hip04_smp_ops);
return ret;
err_table:
iounmap(fabric);
......@@ -383,4 +344,4 @@ static int __init hip04_mcpm_init(void)
err:
return ret;
}
early_initcall(hip04_mcpm_init);
early_initcall(hip04_smp_init);
......@@ -37,7 +37,6 @@
#include <linux/stat.h>
#include <linux/termios.h>
#include <asm/hardware/arm_timer.h>
#include <asm/setup.h>
#include <asm/param.h> /* HZ */
#include <asm/mach-types.h>
......
......@@ -27,7 +27,6 @@
#include "keystone.h"
static struct notifier_block platform_nb;
static unsigned long keystone_dma_pfn_offset __read_mostly;
static int keystone_platform_notifier(struct notifier_block *nb,
......@@ -49,11 +48,18 @@ static int keystone_platform_notifier(struct notifier_block *nb,
return NOTIFY_OK;
}
static struct notifier_block platform_nb = {
.notifier_call = keystone_platform_notifier,
};
static void __init keystone_init(void)
{
keystone_pm_runtime_init();
if (platform_nb.notifier_call)
if (PHYS_OFFSET >= KEYSTONE_HIGH_PHYS_START) {
keystone_dma_pfn_offset = PFN_DOWN(KEYSTONE_HIGH_PHYS_START -
KEYSTONE_LOW_PHYS_START);
bus_register_notifier(&platform_bus_type, &platform_nb);
}
keystone_pm_runtime_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
......@@ -62,11 +68,9 @@ static phys_addr_t keystone_virt_to_idmap(unsigned long x)
return (phys_addr_t)(x) - CONFIG_PAGE_OFFSET + KEYSTONE_LOW_PHYS_START;
}
static void __init keystone_init_meminfo(void)
static long long __init keystone_pv_fixup(void)
{
bool lpae = IS_ENABLED(CONFIG_ARM_LPAE);
bool pvpatch = IS_ENABLED(CONFIG_ARM_PATCH_PHYS_VIRT);
phys_addr_t offset = PHYS_OFFSET - KEYSTONE_LOW_PHYS_START;
long long offset;
phys_addr_t mem_start, mem_end;
mem_start = memblock_start_of_DRAM();
......@@ -75,32 +79,21 @@ static void __init keystone_init_meminfo(void)
/* nothing to do if we are running out of the <32-bit space */
if (mem_start >= KEYSTONE_LOW_PHYS_START &&
mem_end <= KEYSTONE_LOW_PHYS_END)
return;
if (!lpae || !pvpatch) {
pr_crit("Enable %s%s%s to run outside 32-bit space\n",
!lpae ? __stringify(CONFIG_ARM_LPAE) : "",
(!lpae && !pvpatch) ? " and " : "",
!pvpatch ? __stringify(CONFIG_ARM_PATCH_PHYS_VIRT) : "");
}
return 0;
if (mem_start < KEYSTONE_HIGH_PHYS_START ||
mem_end > KEYSTONE_HIGH_PHYS_END) {
pr_crit("Invalid address space for memory (%08llx-%08llx)\n",
(u64)mem_start, (u64)mem_end);
return 0;
}
offset += KEYSTONE_HIGH_PHYS_START;
__pv_phys_pfn_offset = PFN_DOWN(offset);
__pv_offset = (offset - PAGE_OFFSET);
offset = KEYSTONE_HIGH_PHYS_START - KEYSTONE_LOW_PHYS_START;
/* Populate the arch idmap hook */
arch_virt_to_idmap = keystone_virt_to_idmap;
platform_nb.notifier_call = keystone_platform_notifier;
keystone_dma_pfn_offset = PFN_DOWN(KEYSTONE_HIGH_PHYS_START -
KEYSTONE_LOW_PHYS_START);
pr_info("Switching to high address space at 0x%llx\n", (u64)offset);
return offset;
}
static const char *const keystone_match[] __initconst = {
......@@ -115,5 +108,5 @@ DT_MACHINE_START(KEYSTONE, "Keystone")
.smp = smp_ops(keystone_smp_ops),
.init_machine = keystone_init,
.dt_compat = keystone_match,
.init_meminfo = keystone_init_meminfo,
.pv_fixup = keystone_pv_fixup,
MACHINE_END
......@@ -39,19 +39,6 @@ static int keystone_smp_boot_secondary(unsigned int cpu,
return error;
}
#ifdef CONFIG_ARM_LPAE
static void __cpuinit keystone_smp_secondary_initmem(unsigned int cpu)
{
pgd_t *pgd0 = pgd_offset_k(0);
cpu_set_ttbr(1, __pa(pgd0) + TTBR1_OFFSET);
local_flush_tlb_all();
}
#else
static inline void __cpuinit keystone_smp_secondary_initmem(unsigned int cpu)
{}
#endif
struct smp_operations keystone_smp_ops __initdata = {
.smp_boot_secondary = keystone_smp_boot_secondary,
.smp_secondary_init = keystone_smp_secondary_initmem,
};
......@@ -22,8 +22,6 @@
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/hardware/timer-sp.h>
#include "mmio.h"
#include "clcd.h"
......
......@@ -35,20 +35,19 @@
#include <linux/mtd/physmap.h>
#include <linux/memblock.h>
#include <clocksource/timer-sp804.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <mach/platform.h>
#include <mach/irqs.h>
#include <asm/hardware/timer-sp.h>
#include <plat/sched_clock.h>
......@@ -381,10 +380,10 @@ void __init realview_timer_init(unsigned int timer_irq)
/*
* Initialise to a known state (all timers off)
*/
writel(0, timer0_va_base + TIMER_CTRL);
writel(0, timer1_va_base + TIMER_CTRL);
writel(0, timer2_va_base + TIMER_CTRL);
writel(0, timer3_va_base + TIMER_CTRL);
sp804_timer_disable(timer0_va_base);
sp804_timer_disable(timer1_va_base);
sp804_timer_disable(timer2_va_base);
sp804_timer_disable(timer3_va_base);
sp804_clocksource_init(timer3_va_base, "timer3");
sp804_clockevents_init(timer0_va_base, timer_irq, "timer0");
......
......@@ -3,7 +3,7 @@
#
# Common support
obj-y := clock.o generic.o irq.o #nmi-oopser.o
obj-y := clock.o generic.o #nmi-oopser.o
# Specific board support
obj-$(CONFIG_SA1100_ASSABET) += assabet.o
......
......@@ -20,9 +20,12 @@
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/irqchip/irq-sa11x0.h>
#include <video/sa1100fb.h>
#include <soc/sa1100/pwer.h>
#include <asm/div64.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
......@@ -375,6 +378,18 @@ void __init sa1100_timer_init(void)
pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x90000000), 3686400);
}
static struct resource irq_resource =
DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
void __init sa1100_init_irq(void)
{
request_resource(&iomem_resource, &irq_resource);
sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start);
sa1100_init_gpio();
}
/*
* Disable the memory bus request/grant signals on the SA1110 to
* ensure that we don't receive spurious memory requests. We set
......@@ -416,3 +431,25 @@ void sa1110_mb_enable(void)
local_irq_restore(flags);
}
int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on)
{
if (on)
PWER |= BIT(gpio);
else
PWER &= ~BIT(gpio);
return 0;
}
int sa11x0_sc_set_wake(unsigned int irq, unsigned int on)
{
if (BIT(irq) != IC_RTCAlrm)
return -EINVAL;
if (on)
PWER |= PWER_RTC;
else
PWER &= ~PWER_RTC;
return 0;
}
......@@ -41,8 +41,9 @@
#include <linux/bitops.h>
#include <linux/reboot.h>
#include <clocksource/timer-sp804.h>
#include <asm/irq.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst.h>
#include <asm/mach-types.h>
......@@ -52,7 +53,6 @@
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <asm/hardware/timer-sp.h>
#include <plat/sched_clock.h>
......@@ -798,10 +798,10 @@ void __init versatile_timer_init(void)
/*
* Initialise to a known state (all timers off)
*/
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
writel(0, TIMER3_VA_BASE + TIMER_CTRL);
sp804_timer_disable(TIMER0_VA_BASE);
sp804_timer_disable(TIMER1_VA_BASE);
sp804_timer_disable(TIMER2_VA_BASE);
sp804_timer_disable(TIMER3_VA_BASE);
sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1, "timer0");
......
......@@ -6,7 +6,7 @@ comment "Processor Type"
# ARM7TDMI
config CPU_ARM7TDMI
bool "Support ARM7TDMI processor"
bool
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
......@@ -56,7 +56,7 @@ config CPU_ARM740T
# ARM9TDMI
config CPU_ARM9TDMI
bool "Support ARM9TDMI processor"
bool
depends on !MMU
select CPU_32v4T
select CPU_ABRT_NOMMU
......@@ -604,6 +604,22 @@ config CPU_USE_DOMAINS
This option enables or disables the use of domain switching
via the set_fs() function.
config CPU_V7M_NUM_IRQ
int "Number of external interrupts connected to the NVIC"
depends on CPU_V7M
default 90 if ARCH_STM32
default 38 if ARCH_EFM32
default 112 if SOC_VF610
default 240
help
This option indicates the number of interrupts connected to the NVIC.
The value can be larger than the real number of interrupts supported
by the system, but must not be lower.
The default value is 240, corresponding to the maximum number of
interrupts supported by the NVIC on Cortex-M family.
If unsure, keep default value.
#
# CPU supports 36-bit I/O
#
......@@ -624,6 +640,10 @@ config ARM_LPAE
If unsure, say N.
config ARM_PV_FIXUP
def_bool y
depends on ARM_LPAE && ARM_PATCH_PHYS_VIRT && ARCH_KEYSTONE
config ARCH_PHYS_ADDR_T_64BIT
def_bool ARM_LPAE
......
......@@ -18,6 +18,7 @@ obj-$(CONFIG_MODULES) += proc-syms.o
obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o
obj-$(CONFIG_HIGHMEM) += highmem.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_ARM_PV_FIXUP) += pv-fixup-asm.o
obj-$(CONFIG_CPU_ABRT_NOMMU) += abort-nommu.o
obj-$(CONFIG_CPU_ABRT_EV4) += abort-ev4.o
......@@ -55,6 +56,8 @@ obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o
obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o
obj-$(CONFIG_CPU_COPY_FA) += copypage-fa.o
CFLAGS_copypage-feroceon.o := -march=armv5te
obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o
obj-$(CONFIG_CPU_TLB_V4WB) += tlb-v4wb.o
obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o
......
......@@ -38,10 +38,11 @@ struct l2c_init_data {
unsigned way_size_0;
unsigned num_lock;
void (*of_parse)(const struct device_node *, u32 *, u32 *);
void (*enable)(void __iomem *, u32, unsigned);
void (*enable)(void __iomem *, unsigned);
void (*fixup)(void __iomem *, u32, struct outer_cache_fns *);
void (*save)(void __iomem *);
void (*configure)(void __iomem *);
void (*unlock)(void __iomem *, unsigned);
struct outer_cache_fns outer_cache;
};
......@@ -110,14 +111,6 @@ static inline void l2c_unlock(void __iomem *base, unsigned num)
static void l2c_configure(void __iomem *base)
{
if (outer_cache.configure) {
outer_cache.configure(&l2x0_saved_regs);
return;
}
if (l2x0_data->configure)
l2x0_data->configure(base);
l2c_write_sec(l2x0_saved_regs.aux_ctrl, base, L2X0_AUX_CTRL);
}
......@@ -125,18 +118,16 @@ static void l2c_configure(void __iomem *base)
* Enable the L2 cache controller. This function must only be
* called when the cache controller is known to be disabled.
*/
static void l2c_enable(void __iomem *base, u32 aux, unsigned num_lock)
static void l2c_enable(void __iomem *base, unsigned num_lock)
{
unsigned long flags;
/* Do not touch the controller if already enabled. */
if (readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)
return;
l2x0_saved_regs.aux_ctrl = aux;
l2c_configure(base);
if (outer_cache.configure)
outer_cache.configure(&l2x0_saved_regs);
else
l2x0_data->configure(base);
l2c_unlock(base, num_lock);
l2x0_data->unlock(base, num_lock);
local_irq_save(flags);
__l2c_op_way(base + L2X0_INV_WAY);
......@@ -163,7 +154,11 @@ static void l2c_save(void __iomem *base)
static void l2c_resume(void)
{
l2c_enable(l2x0_base, l2x0_saved_regs.aux_ctrl, l2x0_data->num_lock);
void __iomem *base = l2x0_base;
/* Do not touch the controller if already enabled. */
if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN))
l2c_enable(base, l2x0_data->num_lock);
}
/*
......@@ -252,6 +247,8 @@ static const struct l2c_init_data l2c210_data __initconst = {
.num_lock = 1,
.enable = l2c_enable,
.save = l2c_save,
.configure = l2c_configure,
.unlock = l2c_unlock,
.outer_cache = {
.inv_range = l2c210_inv_range,
.clean_range = l2c210_clean_range,
......@@ -391,16 +388,22 @@ static void l2c220_sync(void)
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
}
static void l2c220_enable(void __iomem *base, u32 aux, unsigned num_lock)
static void l2c220_enable(void __iomem *base, unsigned num_lock)
{
/*
* Always enable non-secure access to the lockdown registers -
* we write to them as part of the L2C enable sequence so they
* need to be accessible.
*/
aux |= L220_AUX_CTRL_NS_LOCKDOWN;
l2x0_saved_regs.aux_ctrl |= L220_AUX_CTRL_NS_LOCKDOWN;
l2c_enable(base, aux, num_lock);
l2c_enable(base, num_lock);
}
static void l2c220_unlock(void __iomem *base, unsigned num_lock)
{
if (readl_relaxed(base + L2X0_AUX_CTRL) & L220_AUX_CTRL_NS_LOCKDOWN)
l2c_unlock(base, num_lock);
}
static const struct l2c_init_data l2c220_data = {
......@@ -409,6 +412,8 @@ static const struct l2c_init_data l2c220_data = {
.num_lock = 1,
.enable = l2c220_enable,
.save = l2c_save,
.configure = l2c_configure,
.unlock = l2c220_unlock,
.outer_cache = {
.inv_range = l2c220_inv_range,
.clean_range = l2c220_clean_range,
......@@ -569,6 +574,8 @@ static void l2c310_configure(void __iomem *base)
{
unsigned revision;
l2c_configure(base);
/* restore pl310 setup */
l2c_write_sec(l2x0_saved_regs.tag_latency, base,
L310_TAG_LATENCY_CTRL);
......@@ -603,10 +610,11 @@ static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, v
return NOTIFY_OK;
}
static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock)
static void __init l2c310_enable(void __iomem *base, unsigned num_lock)
{
unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK;
bool cortex_a9 = read_cpuid_part() == ARM_CPU_PART_CORTEX_A9;
u32 aux = l2x0_saved_regs.aux_ctrl;
if (rev >= L310_CACHE_ID_RTL_R2P0) {
if (cortex_a9) {
......@@ -649,9 +657,9 @@ static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock)
* we write to them as part of the L2C enable sequence so they
* need to be accessible.
*/
aux |= L310_AUX_CTRL_NS_LOCKDOWN;
l2x0_saved_regs.aux_ctrl = aux | L310_AUX_CTRL_NS_LOCKDOWN;
l2c_enable(base, aux, num_lock);
l2c_enable(base, num_lock);
/* Read back resulting AUX_CTRL value as it could have been altered. */
aux = readl_relaxed(base + L2X0_AUX_CTRL);
......@@ -755,6 +763,12 @@ static void l2c310_resume(void)
set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1));
}
static void l2c310_unlock(void __iomem *base, unsigned num_lock)
{
if (readl_relaxed(base + L2X0_AUX_CTRL) & L310_AUX_CTRL_NS_LOCKDOWN)
l2c_unlock(base, num_lock);
}
static const struct l2c_init_data l2c310_init_fns __initconst = {
.type = "L2C-310",
.way_size_0 = SZ_8K,
......@@ -763,6 +777,7 @@ static const struct l2c_init_data l2c310_init_fns __initconst = {
.fixup = l2c310_fixup,
.save = l2c310_save,
.configure = l2c310_configure,
.unlock = l2c310_unlock,
.outer_cache = {
.inv_range = l2c210_inv_range,
.clean_range = l2c210_clean_range,
......@@ -856,8 +871,11 @@ static int __init __l2c_init(const struct l2c_init_data *data,
* Check if l2x0 controller is already enabled. If we are booting
* in non-secure mode accessing the below registers will fault.
*/
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN))
data->enable(l2x0_base, aux, data->num_lock);
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
l2x0_saved_regs.aux_ctrl = aux;
data->enable(l2x0_base, data->num_lock);
}
outer_cache = fns;
......@@ -1066,6 +1084,8 @@ static const struct l2c_init_data of_l2c210_data __initconst = {
.of_parse = l2x0_of_parse,
.enable = l2c_enable,
.save = l2c_save,
.configure = l2c_configure,
.unlock = l2c_unlock,
.outer_cache = {
.inv_range = l2c210_inv_range,
.clean_range = l2c210_clean_range,
......@@ -1084,6 +1104,8 @@ static const struct l2c_init_data of_l2c220_data __initconst = {
.of_parse = l2x0_of_parse,
.enable = l2c220_enable,
.save = l2c_save,
.configure = l2c_configure,
.unlock = l2c220_unlock,
.outer_cache = {
.inv_range = l2c220_inv_range,
.clean_range = l2c220_clean_range,
......@@ -1199,6 +1221,26 @@ static void __init l2c310_of_parse(const struct device_node *np,
pr_err("L2C-310 OF arm,prefetch-offset property value is missing\n");
}
ret = of_property_read_u32(np, "prefetch-data", &val);
if (ret == 0) {
if (val)
prefetch |= L310_PREFETCH_CTRL_DATA_PREFETCH;
else
prefetch &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
} else if (ret != -EINVAL) {
pr_err("L2C-310 OF prefetch-data property value is missing\n");
}
ret = of_property_read_u32(np, "prefetch-instr", &val);
if (ret == 0) {
if (val)
prefetch |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
else
prefetch &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
} else if (ret != -EINVAL) {
pr_err("L2C-310 OF prefetch-instr property value is missing\n");
}
l2x0_saved_regs.prefetch_ctrl = prefetch;
}
......@@ -1211,6 +1253,7 @@ static const struct l2c_init_data of_l2c310_data __initconst = {
.fixup = l2c310_fixup,
.save = l2c310_save,
.configure = l2c310_configure,
.unlock = l2c310_unlock,
.outer_cache = {
.inv_range = l2c210_inv_range,
.clean_range = l2c210_clean_range,
......@@ -1240,6 +1283,7 @@ static const struct l2c_init_data of_l2c310_coherent_data __initconst = {
.fixup = l2c310_fixup,
.save = l2c310_save,
.configure = l2c310_configure,
.unlock = l2c310_unlock,
.outer_cache = {
.inv_range = l2c210_inv_range,
.clean_range = l2c210_clean_range,
......@@ -1366,7 +1410,7 @@ static void aurora_save(void __iomem *base)
* For Aurora cache in no outer mode, enable via the CP15 coprocessor
* broadcasting of cache commands to L2.
*/
static void __init aurora_enable_no_outer(void __iomem *base, u32 aux,
static void __init aurora_enable_no_outer(void __iomem *base,
unsigned num_lock)
{
u32 u;
......@@ -1377,7 +1421,7 @@ static void __init aurora_enable_no_outer(void __iomem *base, u32 aux,
isb();
l2c_enable(base, aux, num_lock);
l2c_enable(base, num_lock);
}
static void __init aurora_fixup(void __iomem *base, u32 cache_id,
......@@ -1416,6 +1460,8 @@ static const struct l2c_init_data of_aurora_with_outer_data __initconst = {
.enable = l2c_enable,
.fixup = aurora_fixup,
.save = aurora_save,
.configure = l2c_configure,
.unlock = l2c_unlock,
.outer_cache = {
.inv_range = aurora_inv_range,
.clean_range = aurora_clean_range,
......@@ -1435,6 +1481,8 @@ static const struct l2c_init_data of_aurora_no_outer_data __initconst = {
.enable = aurora_enable_no_outer,
.fixup = aurora_fixup,
.save = aurora_save,
.configure = l2c_configure,
.unlock = l2c_unlock,
.outer_cache = {
.resume = l2c_resume,
},
......@@ -1585,6 +1633,7 @@ static const struct l2c_init_data of_bcm_l2x0_data __initconst = {
.enable = l2c310_enable,
.save = l2c310_save,
.configure = l2c310_configure,
.unlock = l2c310_unlock,
.outer_cache = {
.inv_range = bcm_inv_range,
.clean_range = bcm_clean_range,
......@@ -1608,6 +1657,7 @@ static void __init tauros3_save(void __iomem *base)
static void tauros3_configure(void __iomem *base)
{
l2c_configure(base);
writel_relaxed(l2x0_saved_regs.aux2_ctrl,
base + TAUROS3_AUX2_CTRL);
writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
......@@ -1621,6 +1671,7 @@ static const struct l2c_init_data of_tauros3_data __initconst = {
.enable = l2c_enable,
.save = tauros3_save,
.configure = tauros3_configure,
.unlock = l2c_unlock,
/* Tauros3 broadcasts L1 cache operations to L2 */
.outer_cache = {
.resume = l2c_resume,
......
......@@ -148,11 +148,14 @@ static void *arm_coherent_dma_alloc(struct device *dev, size_t size,
dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs);
static void arm_coherent_dma_free(struct device *dev, size_t size, void *cpu_addr,
dma_addr_t handle, struct dma_attrs *attrs);
static int arm_coherent_dma_mmap(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t dma_addr, size_t size,
struct dma_attrs *attrs);
struct dma_map_ops arm_coherent_dma_ops = {
.alloc = arm_coherent_dma_alloc,
.free = arm_coherent_dma_free,
.mmap = arm_dma_mmap,
.mmap = arm_coherent_dma_mmap,
.get_sgtable = arm_dma_get_sgtable,
.map_page = arm_coherent_dma_map_page,
.map_sg = arm_dma_map_sg,
......@@ -690,10 +693,7 @@ static void *arm_coherent_dma_alloc(struct device *dev, size_t size,
attrs, __builtin_return_address(0));
}
/*
* Create userspace mapping for the DMA-coherent memory.
*/
int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
static int __arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t dma_addr, size_t size,
struct dma_attrs *attrs)
{
......@@ -704,8 +704,6 @@ int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
unsigned long pfn = dma_to_pfn(dev, dma_addr);
unsigned long off = vma->vm_pgoff;
vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot);
if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
return ret;
......@@ -720,6 +718,26 @@ int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
return ret;
}
/*
* Create userspace mapping for the DMA-coherent memory.
*/
static int arm_coherent_dma_mmap(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t dma_addr, size_t size,
struct dma_attrs *attrs)
{
return __arm_dma_mmap(dev, vma, cpu_addr, dma_addr, size, attrs);
}
int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t dma_addr, size_t size,
struct dma_attrs *attrs)
{
#ifdef CONFIG_MMU
vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot);
#endif /* CONFIG_MMU */
return __arm_dma_mmap(dev, vma, cpu_addr, dma_addr, size, attrs);
}
/*
* Free a buffer as defined by the above mapping.
*/
......
......@@ -1387,123 +1387,98 @@ static void __init map_lowmem(void)
}
}
#ifdef CONFIG_ARM_LPAE
#ifdef CONFIG_ARM_PV_FIXUP
extern unsigned long __atags_pointer;
typedef void pgtables_remap(long long offset, unsigned long pgd, void *bdata);
pgtables_remap lpae_pgtables_remap_asm;
/*
* early_paging_init() recreates boot time page table setup, allowing machines
* to switch over to a high (>4G) address space on LPAE systems
*/
void __init early_paging_init(const struct machine_desc *mdesc,
struct proc_info_list *procinfo)
void __init early_paging_init(const struct machine_desc *mdesc)
{
pmdval_t pmdprot = procinfo->__cpu_mm_mmu_flags;
unsigned long map_start, map_end;
pgd_t *pgd0, *pgdk;
pud_t *pud0, *pudk, *pud_start;
pmd_t *pmd0, *pmdk;
phys_addr_t phys;
int i;
pgtables_remap *lpae_pgtables_remap;
unsigned long pa_pgd;
unsigned int cr, ttbcr;
long long offset;
void *boot_data;
if (!(mdesc->init_meminfo))
if (!mdesc->pv_fixup)
return;
/* remap kernel code and data */
map_start = init_mm.start_code & PMD_MASK;
map_end = ALIGN(init_mm.brk, PMD_SIZE);
offset = mdesc->pv_fixup();
if (offset == 0)
return;
/* get a handle on things... */
pgd0 = pgd_offset_k(0);
pud_start = pud0 = pud_offset(pgd0, 0);
pmd0 = pmd_offset(pud0, 0);
/*
* Get the address of the remap function in the 1:1 identity
* mapping setup by the early page table assembly code. We
* must get this prior to the pv update. The following barrier
* ensures that this is complete before we fixup any P:V offsets.
*/
lpae_pgtables_remap = (pgtables_remap *)(unsigned long)__pa(lpae_pgtables_remap_asm);
pa_pgd = __pa(swapper_pg_dir);
boot_data = __va(__atags_pointer);
barrier();
pgdk = pgd_offset_k(map_start);
pudk = pud_offset(pgdk, map_start);
pmdk = pmd_offset(pudk, map_start);
pr_info("Switching physical address space to 0x%08llx\n",
(u64)PHYS_OFFSET + offset);
mdesc->init_meminfo();
/* Re-set the phys pfn offset, and the pv offset */
__pv_offset += offset;
__pv_phys_pfn_offset += PFN_DOWN(offset);
/* Run the patch stub to update the constants */
fixup_pv_table(&__pv_table_begin,
(&__pv_table_end - &__pv_table_begin) << 2);
/*
* Cache cleaning operations for self-modifying code
* We should clean the entries by MVA but running a
* for loop over every pv_table entry pointer would
* just complicate the code.
*/
flush_cache_louis();
dsb(ishst);
isb();
/*
* FIXME: This code is not architecturally compliant: we modify
* the mappings in-place, indeed while they are in use by this
* very same code. This may lead to unpredictable behaviour of
* the CPU.
*
* Even modifying the mappings in a separate page table does
* not resolve this.
*
* The architecture strongly recommends that when a mapping is
* changed, that it is changed by first going via an invalid
* mapping and back to the new mapping. This is to ensure that
* no TLB conflicts (caused by the TLB having more than one TLB
* entry match a translation) can occur. However, doing that
* here will result in unmapping the code we are running.
*/
pr_warn("WARNING: unsafe modification of in-place page tables - tainting kernel\n");
add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_STILL_OK);
/*
* Remap level 1 table. This changes the physical addresses
* used to refer to the level 2 page tables to the high
* physical address alias, leaving everything else the same.
*/
for (i = 0; i < PTRS_PER_PGD; pud0++, i++) {
set_pud(pud0,
__pud(__pa(pmd0) | PMD_TYPE_TABLE | L_PGD_SWAPPER));
pmd0 += PTRS_PER_PMD;
}
/*
* Remap the level 2 table, pointing the mappings at the high
* physical address alias of these pages.
*/
phys = __pa(map_start);
do {
*pmdk++ = __pmd(phys | pmdprot);
phys += PMD_SIZE;
} while (phys < map_end);
/*
* Ensure that the above updates are flushed out of the cache.
* This is not strictly correct; on a system where the caches
* are coherent with each other, but the MMU page table walks
* may not be coherent, flush_cache_all() may be a no-op, and
* this will fail.
* We changing not only the virtual to physical mapping, but also
* the physical addresses used to access memory. We need to flush
* all levels of cache in the system with caching disabled to
* ensure that all data is written back, and nothing is prefetched
* into the caches. We also need to prevent the TLB walkers
* allocating into the caches too. Note that this is ARMv7 LPAE
* specific.
*/
cr = get_cr();
set_cr(cr & ~(CR_I | CR_C));
asm("mrc p15, 0, %0, c2, c0, 2" : "=r" (ttbcr));
asm volatile("mcr p15, 0, %0, c2, c0, 2"
: : "r" (ttbcr & ~(3 << 8 | 3 << 10)));
flush_cache_all();
/*
* Re-write the TTBR values to point them at the high physical
* alias of the page tables. We expect __va() will work on
* cpu_get_pgd(), which returns the value of TTBR0.
* Fixup the page tables - this must be in the idmap region as
* we need to disable the MMU to do this safely, and hence it
* needs to be assembly. It's fairly simple, as we're using the
* temporary tables setup by the initial assembly code.
*/
cpu_switch_mm(pgd0, &init_mm);
cpu_set_ttbr(1, __pa(pgd0) + TTBR1_OFFSET);
lpae_pgtables_remap(offset, pa_pgd, boot_data);
/* Finally flush any stale TLB values. */
local_flush_bp_all();
local_flush_tlb_all();
/* Re-enable the caches and cacheable TLB walks */
asm volatile("mcr p15, 0, %0, c2, c0, 2" : : "r" (ttbcr));
set_cr(cr);
}
#else
void __init early_paging_init(const struct machine_desc *mdesc,
struct proc_info_list *procinfo)
void __init early_paging_init(const struct machine_desc *mdesc)
{
if (mdesc->init_meminfo)
mdesc->init_meminfo();
long long offset;
if (!mdesc->pv_fixup)
return;
offset = mdesc->pv_fixup();
if (offset == 0)
return;
pr_crit("Physical address space modification is only to support Keystone2.\n");
pr_crit("Please enable ARM_LPAE and ARM_PATCH_PHYS_VIRT support to use this\n");
pr_crit("feature. Your kernel may crash now, have a good day.\n");
add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_STILL_OK);
}
#endif
......
......@@ -303,15 +303,6 @@ void __init sanity_check_meminfo(void)
memblock_set_current_limit(end);
}
/*
* early_paging_init() recreates boot time page table setup, allowing machines
* to switch over to a high (>4G) address space on LPAE systems
*/
void __init early_paging_init(const struct machine_desc *mdesc,
struct proc_info_list *procinfo)
{
}
/*
* paging_init() sets up the page tables, initialises the zone memory
* maps, and sets up the zero page, bad page and bad page tables.
......
......@@ -36,14 +36,16 @@
*
* It is assumed that:
* - we are not using split page tables
*
* Note that we always need to flush BTAC/BTB if IBE is set
* even on Cortex-A8 revisions not affected by 430973.
* If IBE is not set, the flush BTAC/BTB won't do anything.
*/
ENTRY(cpu_ca8_switch_mm)
#ifdef CONFIG_MMU
mov r2, #0
#ifdef CONFIG_ARM_ERRATA_430973
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
#endif
#endif
ENTRY(cpu_v7_switch_mm)
#ifdef CONFIG_MMU
mmid r1, r1 @ get mm->context.id
......@@ -148,10 +150,10 @@ ENDPROC(cpu_v7_set_pte_ext)
* Macro for setting up the TTBRx and TTBCR registers.
* - \ttb0 and \ttb1 updated with the corresponding flags.
*/
.macro v7_ttb_setup, zero, ttbr0, ttbr1, tmp
.macro v7_ttb_setup, zero, ttbr0l, ttbr0h, ttbr1, tmp
mcr p15, 0, \zero, c2, c0, 2 @ TTB control register
ALT_SMP(orr \ttbr0, \ttbr0, #TTB_FLAGS_SMP)
ALT_UP(orr \ttbr0, \ttbr0, #TTB_FLAGS_UP)
ALT_SMP(orr \ttbr0l, \ttbr0l, #TTB_FLAGS_SMP)
ALT_UP(orr \ttbr0l, \ttbr0l, #TTB_FLAGS_UP)
ALT_SMP(orr \ttbr1, \ttbr1, #TTB_FLAGS_SMP)
ALT_UP(orr \ttbr1, \ttbr1, #TTB_FLAGS_UP)
mcr p15, 0, \ttbr1, c2, c0, 1 @ load TTB1
......
......@@ -126,11 +126,10 @@ ENDPROC(cpu_v7_set_pte_ext)
* Macro for setting up the TTBRx and TTBCR registers.
* - \ttbr1 updated.
*/
.macro v7_ttb_setup, zero, ttbr0, ttbr1, tmp
.macro v7_ttb_setup, zero, ttbr0l, ttbr0h, ttbr1, tmp
ldr \tmp, =swapper_pg_dir @ swapper_pg_dir virtual address
mov \tmp, \tmp, lsr #ARCH_PGD_SHIFT
cmp \ttbr1, \tmp @ PHYS_OFFSET > PAGE_OFFSET?
mrc p15, 0, \tmp, c2, c0, 2 @ TTB control register
cmp \ttbr1, \tmp, lsr #12 @ PHYS_OFFSET > PAGE_OFFSET?
mrc p15, 0, \tmp, c2, c0, 2 @ TTB control egister
orr \tmp, \tmp, #TTB_EAE
ALT_SMP(orr \tmp, \tmp, #TTB_FLAGS_SMP)
ALT_UP(orr \tmp, \tmp, #TTB_FLAGS_UP)
......@@ -143,13 +142,10 @@ ENDPROC(cpu_v7_set_pte_ext)
*/
orrls \tmp, \tmp, #TTBR1_SIZE @ TTBCR.T1SZ
mcr p15, 0, \tmp, c2, c0, 2 @ TTBCR
mov \tmp, \ttbr1, lsr #(32 - ARCH_PGD_SHIFT) @ upper bits
mov \ttbr1, \ttbr1, lsl #ARCH_PGD_SHIFT @ lower bits
mov \tmp, \ttbr1, lsr #20
mov \ttbr1, \ttbr1, lsl #12
addls \ttbr1, \ttbr1, #TTBR1_OFFSET
mcrr p15, 1, \ttbr1, \tmp, c2 @ load TTBR1
mov \tmp, \ttbr0, lsr #(32 - ARCH_PGD_SHIFT) @ upper bits
mov \ttbr0, \ttbr0, lsl #ARCH_PGD_SHIFT @ lower bits
mcrr p15, 0, \ttbr0, \tmp, c2 @ load TTBR0
.endm
/*
......
......@@ -252,6 +252,12 @@ ENDPROC(cpu_pj4b_do_resume)
* Initialise TLB, Caches, and MMU state ready to switch the MMU
* on. Return in r0 the new CP15 C1 control register setting.
*
* r1, r2, r4, r5, r9, r13 must be preserved - r13 is not a stack
* r4: TTBR0 (low word)
* r5: TTBR0 (high word if LPAE)
* r8: TTBR1
* r9: Main ID register
*
* This should be able to cover all ARMv7 cores.
*
* It is assumed that:
......@@ -279,6 +285,78 @@ __v7_ca17mp_setup:
#endif
b __v7_setup
/*
* Errata:
* r0, r10 available for use
* r1, r2, r4, r5, r9, r13: must be preserved
* r3: contains MIDR rX number in bits 23-20
* r6: contains MIDR rXpY as 8-bit XY number
* r9: MIDR
*/
__ca8_errata:
#if defined(CONFIG_ARM_ERRATA_430973) && !defined(CONFIG_ARCH_MULTIPLATFORM)
teq r3, #0x00100000 @ only present in r1p*
mrceq p15, 0, r0, c1, c0, 1 @ read aux control register
orreq r0, r0, #(1 << 6) @ set IBE to 1
mcreq p15, 0, r0, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_458693
teq r6, #0x20 @ only present in r2p0
mrceq p15, 0, r0, c1, c0, 1 @ read aux control register
orreq r0, r0, #(1 << 5) @ set L1NEON to 1
orreq r0, r0, #(1 << 9) @ set PLDNOP to 1
mcreq p15, 0, r0, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_460075
teq r6, #0x20 @ only present in r2p0
mrceq p15, 1, r0, c9, c0, 2 @ read L2 cache aux ctrl register
tsteq r0, #1 << 22
orreq r0, r0, #(1 << 22) @ set the Write Allocate disable bit
mcreq p15, 1, r0, c9, c0, 2 @ write the L2 cache aux ctrl register
#endif
b __errata_finish
__ca9_errata:
#ifdef CONFIG_ARM_ERRATA_742230
cmp r6, #0x22 @ only present up to r2p2
mrcle p15, 0, r0, c15, c0, 1 @ read diagnostic register
orrle r0, r0, #1 << 4 @ set bit #4
mcrle p15, 0, r0, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_742231
teq r6, #0x20 @ present in r2p0
teqne r6, #0x21 @ present in r2p1
teqne r6, #0x22 @ present in r2p2
mrceq p15, 0, r0, c15, c0, 1 @ read diagnostic register
orreq r0, r0, #1 << 12 @ set bit #12
orreq r0, r0, #1 << 22 @ set bit #22
mcreq p15, 0, r0, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_743622
teq r3, #0x00200000 @ only present in r2p*
mrceq p15, 0, r0, c15, c0, 1 @ read diagnostic register
orreq r0, r0, #1 << 6 @ set bit #6
mcreq p15, 0, r0, c15, c0, 1 @ write diagnostic register
#endif
#if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP)
ALT_SMP(cmp r6, #0x30) @ present prior to r3p0
ALT_UP_B(1f)
mrclt p15, 0, r0, c15, c0, 1 @ read diagnostic register
orrlt r0, r0, #1 << 11 @ set bit #11
mcrlt p15, 0, r0, c15, c0, 1 @ write diagnostic register
1:
#endif
b __errata_finish
__ca15_errata:
#ifdef CONFIG_ARM_ERRATA_773022
cmp r6, #0x4 @ only present up to r0p4
mrcle p15, 0, r0, c1, c0, 1 @ read aux control register
orrle r0, r0, #1 << 1 @ disable loop buffer
mcrle p15, 0, r0, c1, c0, 1 @ write aux control register
#endif
b __errata_finish
__v7_pj4b_setup:
#ifdef CONFIG_CPU_PJ4B
......@@ -339,96 +417,38 @@ __v7_setup:
bl v7_invalidate_l1
ldmia r12, {r0-r5, r7, r9, r11, lr}
mrc p15, 0, r0, c0, c0, 0 @ read main ID register
and r10, r0, #0xff000000 @ ARM?
teq r10, #0x41000000
bne 3f
and r5, r0, #0x00f00000 @ variant
and r6, r0, #0x0000000f @ revision
orr r6, r6, r5, lsr #20-4 @ combine variant and revision
ubfx r0, r0, #4, #12 @ primary part number
and r0, r9, #0xff000000 @ ARM?
teq r0, #0x41000000
bne __errata_finish
and r3, r9, #0x00f00000 @ variant
and r6, r9, #0x0000000f @ revision
orr r6, r6, r3, lsr #20-4 @ combine variant and revision
ubfx r0, r9, #4, #12 @ primary part number
/* Cortex-A8 Errata */
ldr r10, =0x00000c08 @ Cortex-A8 primary part number
teq r0, r10
bne 2f
#if defined(CONFIG_ARM_ERRATA_430973) && !defined(CONFIG_ARCH_MULTIPLATFORM)
teq r5, #0x00100000 @ only present in r1p*
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
orreq r10, r10, #(1 << 6) @ set IBE to 1
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_458693
teq r6, #0x20 @ only present in r2p0
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
orreq r10, r10, #(1 << 5) @ set L1NEON to 1
orreq r10, r10, #(1 << 9) @ set PLDNOP to 1
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_460075
teq r6, #0x20 @ only present in r2p0
mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
tsteq r10, #1 << 22
orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit
mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
#endif
b 3f
beq __ca8_errata
/* Cortex-A9 Errata */
2: ldr r10, =0x00000c09 @ Cortex-A9 primary part number
ldr r10, =0x00000c09 @ Cortex-A9 primary part number
teq r0, r10
bne 3f
#ifdef CONFIG_ARM_ERRATA_742230
cmp r6, #0x22 @ only present up to r2p2
mrcle p15, 0, r10, c15, c0, 1 @ read diagnostic register
orrle r10, r10, #1 << 4 @ set bit #4
mcrle p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_742231
teq r6, #0x20 @ present in r2p0
teqne r6, #0x21 @ present in r2p1
teqne r6, #0x22 @ present in r2p2
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 12 @ set bit #12
orreq r10, r10, #1 << 22 @ set bit #22
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_743622
teq r5, #0x00200000 @ only present in r2p*
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 6 @ set bit #6
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP)
ALT_SMP(cmp r6, #0x30) @ present prior to r3p0
ALT_UP_B(1f)
mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register
orrlt r10, r10, #1 << 11 @ set bit #11
mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register
1:
#endif
beq __ca9_errata
/* Cortex-A15 Errata */
3: ldr r10, =0x00000c0f @ Cortex-A15 primary part number
ldr r10, =0x00000c0f @ Cortex-A15 primary part number
teq r0, r10
bne 4f
beq __ca15_errata
#ifdef CONFIG_ARM_ERRATA_773022
cmp r6, #0x4 @ only present up to r0p4
mrcle p15, 0, r10, c1, c0, 1 @ read aux control register
orrle r10, r10, #1 << 1 @ disable loop buffer
mcrle p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
4: mov r10, #0
__errata_finish:
mov r10, #0
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
#ifdef CONFIG_MMU
mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs
v7_ttb_setup r10, r4, r8, r5 @ TTBCR, TTBRx setup
ldr r5, =PRRR @ PRRR
v7_ttb_setup r10, r4, r5, r8, r3 @ TTBCR, TTBRx setup
ldr r3, =PRRR @ PRRR
ldr r6, =NMRR @ NMRR
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r3, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
#endif
dsb @ Complete invalidations
......@@ -437,22 +457,22 @@ __v7_setup:
and r0, r0, #(0xf << 12) @ ThumbEE enabled field
teq r0, #(1 << 12) @ check if ThumbEE is present
bne 1f
mov r5, #0
mcr p14, 6, r5, c1, c0, 0 @ Initialize TEEHBR to 0
mov r3, #0
mcr p14, 6, r3, c1, c0, 0 @ Initialize TEEHBR to 0
mrc p14, 6, r0, c0, c0, 0 @ load TEECR
orr r0, r0, #1 @ set the 1st bit in order to
mcr p14, 6, r0, c0, c0, 0 @ stop userspace TEEHBR access
1:
#endif
adr r5, v7_crval
ldmia r5, {r5, r6}
adr r3, v7_crval
ldmia r3, {r3, r6}
ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables
#ifdef CONFIG_SWP_EMULATE
orr r5, r5, #(1 << 10) @ set SW bit in "clear"
orr r3, r3, #(1 << 10) @ set SW bit in "clear"
bic r6, r6, #(1 << 10) @ clear it in "mmuset"
#endif
mrc p15, 0, r0, c1, c0, 0 @ read control register
bic r0, r0, r5 @ clear bits them
bic r0, r0, r3 @ clear bits them
orr r0, r0, r6 @ set them
THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions
ret lr @ return to head.S:__ret
......
......@@ -98,7 +98,7 @@ __v7m_setup:
str r5, [r0, V7M_SCB_SHPR3] @ set PendSV priority
@ SVC to run the kernel in this mode
adr r1, BSYM(1f)
badr r1, 1f
ldr r5, [r12, #11 * 4] @ read the SVC vector entry
str r1, [r12, #11 * 4] @ write the temporary SVC vector entry
mov r6, lr @ save LR
......
/*
* Copyright (C) 2015 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This assembly is required to safely remap the physical address space
* for Keystone 2
*/
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/cp15.h>
#include <asm/memory.h>
#include <asm/pgtable.h>
.section ".idmap.text", "ax"
#define L1_ORDER 3
#define L2_ORDER 3
ENTRY(lpae_pgtables_remap_asm)
stmfd sp!, {r4-r8, lr}
mrc p15, 0, r8, c1, c0, 0 @ read control reg
bic ip, r8, #CR_M @ disable caches and MMU
mcr p15, 0, ip, c1, c0, 0
dsb
isb
/* Update level 2 entries covering the kernel */
ldr r6, =(_end - 1)
add r7, r2, #0x1000
add r6, r7, r6, lsr #SECTION_SHIFT - L2_ORDER
add r7, r7, #PAGE_OFFSET >> (SECTION_SHIFT - L2_ORDER)
1: ldrd r4, [r7]
adds r4, r4, r0
adc r5, r5, r1
strd r4, [r7], #1 << L2_ORDER
cmp r7, r6
bls 1b
/* Update level 2 entries for the boot data */
add r7, r2, #0x1000
add r7, r7, r3, lsr #SECTION_SHIFT - L2_ORDER
bic r7, r7, #(1 << L2_ORDER) - 1
ldrd r4, [r7]
adds r4, r4, r0
adc r5, r5, r1
strd r4, [r7], #1 << L2_ORDER
ldrd r4, [r7]
adds r4, r4, r0
adc r5, r5, r1
strd r4, [r7]
/* Update level 1 entries */
mov r6, #4
mov r7, r2
2: ldrd r4, [r7]
adds r4, r4, r0
adc r5, r5, r1
strd r4, [r7], #1 << L1_ORDER
subs r6, r6, #1
bne 2b
mrrc p15, 0, r4, r5, c2 @ read TTBR0
adds r4, r4, r0 @ update physical address
adc r5, r5, r1
mcrr p15, 0, r4, r5, c2 @ write back TTBR0
mrrc p15, 1, r4, r5, c2 @ read TTBR1
adds r4, r4, r0 @ update physical address
adc r5, r5, r1
mcrr p15, 1, r4, r5, c2 @ write back TTBR1
dsb
mov ip, #0
mcr p15, 0, ip, c7, c5, 0 @ I+BTB cache invalidate
mcr p15, 0, ip, c8, c7, 0 @ local_flush_tlb_all()
dsb
isb
mcr p15, 0, r8, c1, c0, 0 @ re-enable MMU
dsb
isb
ldmfd sp!, {r4-r8, pc}
ENDPROC(lpae_pgtables_remap_asm)
......@@ -6,9 +6,15 @@ obj-vdso := vgettimeofday.o datapage.o
targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.so.raw vdso.lds
obj-vdso := $(addprefix $(obj)/, $(obj-vdso))
ccflags-y := -shared -fPIC -fno-common -fno-builtin -fno-stack-protector
ccflags-y += -nostdlib -Wl,-soname=linux-vdso.so.1 -DDISABLE_BRANCH_PROFILING
ccflags-y += -Wl,--no-undefined $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
ccflags-y := -fPIC -fno-common -fno-builtin -fno-stack-protector
ccflags-y += -DDISABLE_BRANCH_PROFILING
VDSO_LDFLAGS := -Wl,-Bsymbolic -Wl,--no-undefined -Wl,-soname=linux-vdso.so.1
VDSO_LDFLAGS += -Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096
VDSO_LDFLAGS += -nostdlib -shared
VDSO_LDFLAGS += $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
VDSO_LDFLAGS += $(call cc-ldoption, -Wl$(comma)--build-id)
VDSO_LDFLAGS += $(call cc-option, -fuse-ld=bfd)
obj-$(CONFIG_VDSO) += vdso.o
extra-$(CONFIG_VDSO) += vdso.lds
......@@ -40,10 +46,8 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE
# Actual build commands
quiet_cmd_vdsold = VDSO $@
cmd_vdsold = $(CC) $(c_flags) -Wl,-T $(filter %.lds,$^) $(filter %.o,$^) \
$(call cc-ldoption, -Wl$(comma)--build-id) \
-Wl,-Bsymbolic -Wl,-z,max-page-size=4096 \
-Wl,-z,common-page-size=4096 -o $@
cmd_vdsold = $(CC) $(c_flags) $(VDSO_LDFLAGS) \
-Wl,-T $(filter %.lds,$^) $(filter %.o,$^) -o $@
quiet_cmd_vdsomunge = MUNGE $@
cmd_vdsomunge = $(objtree)/$(obj)/vdsomunge $< $@
......
......@@ -142,6 +142,12 @@ config ARM_GLOBAL_TIMER
help
This options enables support for the ARM global timer unit
config ARM_TIMER_SP804
bool "Support for Dual Timer SP804 module"
depends on GENERIC_SCHED_CLOCK && CLKDEV_LOOKUP
select CLKSRC_MMIO
select CLKSRC_OF if OF
config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
bool
depends on ARM_GLOBAL_TIMER
......
......@@ -48,6 +48,7 @@ obj-$(CONFIG_MTK_TIMER) += mtk_timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
obj-$(CONFIG_ARMV7M_SYSTICK) += armv7m_systick.o
obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp804.o
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o
obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o
obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o
......
......@@ -26,7 +26,8 @@
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/sched_clock.h>
#include <asm/hardware/arm_timer.h>
#include "timer-sp.h"
static void __iomem * sched_clk_base;
......
#ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H
#define __ASM_ARM_HARDWARE_ARM_TIMER_H
/*
* ARM timer implementation, found in Integrator, Versatile and Realview
* platforms. Not all platforms support all registers and bits in these
......@@ -31,5 +28,3 @@
#define TIMER_RIS 0x10 /* CVR ro */
#define TIMER_MIS 0x14 /* CVR ro */
#define TIMER_BGLOAD 0x18 /* CVR rw */
#endif
/*
* linux/arch/arm/common/timer-sp.c
* linux/drivers/clocksource/timer-sp.c
*
* Copyright (C) 1999 - 2003 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
......@@ -30,8 +30,9 @@
#include <linux/of_irq.h>
#include <linux/sched_clock.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/timer-sp.h>
#include <clocksource/timer-sp804.h>
#include "timer-sp.h"
static long __init sp804_get_clock_rate(struct clk *clk)
{
......@@ -71,6 +72,11 @@ static u64 notrace sp804_read(void)
return ~readl_relaxed(sched_clock_base + TIMER_VALUE);
}
void __init sp804_timer_disable(void __iomem *base)
{
writel(0, base + TIMER_CTRL);
}
void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
const char *name,
struct clk *clk,
......
......@@ -108,13 +108,7 @@ static int notrace bl_powerdown_finisher(unsigned long arg)
unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
mcpm_set_entry_vector(cpu, cluster, cpu_resume);
/*
* Residency value passed to mcpm_cpu_suspend back-end
* has to be given clear semantics. Set to 0 as a
* temporary value.
*/
mcpm_cpu_suspend(0);
mcpm_cpu_suspend();
/* return value != 0 means failure */
return 1;
......
......@@ -49,3 +49,4 @@ obj-$(CONFIG_ARCH_MEDIATEK) += irq-mtk-sysirq.o
obj-$(CONFIG_ARCH_DIGICOLOR) += irq-digicolor.o
obj-$(CONFIG_RENESAS_H8300H_INTC) += irq-renesas-h8300h.o
obj-$(CONFIG_RENESAS_H8S_INTC) += irq-renesas-h8s.o
obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
/*
* linux/arch/arm/mach-sa1100/irq.c
*
* Copyright (C) 2015 Dmitry Eremin-Solenikov
* Copyright (C) 1999-2001 Nicolas Pitre
*
* Generic IRQ handling for the SA11x0, GPIO 11-27 IRQ demultiplexing.
* Generic IRQ handling for the SA11x0.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -15,16 +14,21 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/ioport.h>
#include <linux/syscore_ops.h>
#include <linux/irqchip/irq-sa11x0.h>
#include <soc/sa1100/pwer.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
#include "generic.h"
#define ICIP 0x00 /* IC IRQ Pending reg. */
#define ICMR 0x04 /* IC Mask Reg. */
#define ICLR 0x08 /* IC Level Reg. */
#define ICCR 0x0C /* IC Control Reg. */
#define ICFP 0x10 /* IC FIQ Pending reg. */
#define ICPR 0x20 /* IC Pending Reg. */
static void __iomem *iobase;
/*
* We don't need to ACK IRQs on the SA1100 unless they're GPIOs
......@@ -32,27 +36,25 @@
*/
static void sa1100_mask_irq(struct irq_data *d)
{
ICMR &= ~BIT(d->hwirq);
u32 reg;
reg = readl_relaxed(iobase + ICMR);
reg &= ~BIT(d->hwirq);
writel_relaxed(reg, iobase + ICMR);
}
static void sa1100_unmask_irq(struct irq_data *d)
{
ICMR |= BIT(d->hwirq);
u32 reg;
reg = readl_relaxed(iobase + ICMR);
reg |= BIT(d->hwirq);
writel_relaxed(reg, iobase + ICMR);
}
/*
* Apart form GPIOs, only the RTC alarm can be a wakeup event.
*/
static int sa1100_set_wake(struct irq_data *d, unsigned int on)
{
if (BIT(d->hwirq) == IC_RTCAlrm) {
if (on)
PWER |= PWER_RTC;
else
PWER &= ~PWER_RTC;
return 0;
}
return -EINVAL;
return sa11x0_sc_set_wake(d->hwirq, on);
}
static struct irq_chip sa1100_normal_chip = {
......@@ -73,16 +75,13 @@ static int sa1100_normal_irqdomain_map(struct irq_domain *d,
return 0;
}
static struct irq_domain_ops sa1100_normal_irqdomain_ops = {
static const struct irq_domain_ops sa1100_normal_irqdomain_ops = {
.map = sa1100_normal_irqdomain_map,
.xlate = irq_domain_xlate_onetwocell,
};
static struct irq_domain *sa1100_normal_irqdomain;
static struct resource irq_resource =
DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
static struct sa1100irq_state {
unsigned int saved;
unsigned int icmr;
......@@ -95,16 +94,14 @@ static int sa1100irq_suspend(void)
struct sa1100irq_state *st = &sa1100irq_state;
st->saved = 1;
st->icmr = ICMR;
st->iclr = ICLR;
st->iccr = ICCR;
st->icmr = readl_relaxed(iobase + ICMR);
st->iclr = readl_relaxed(iobase + ICLR);
st->iccr = readl_relaxed(iobase + ICCR);
/*
* Disable all GPIO-based interrupts.
*/
ICMR &= ~(IC_GPIO11_27|IC_GPIO10|IC_GPIO9|IC_GPIO8|IC_GPIO7|
IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2|
IC_GPIO1|IC_GPIO0);
writel_relaxed(st->icmr & 0xfffff000, iobase + ICMR);
return 0;
}
......@@ -114,10 +111,10 @@ static void sa1100irq_resume(void)
struct sa1100irq_state *st = &sa1100irq_state;
if (st->saved) {
ICCR = st->iccr;
ICLR = st->iclr;
writel_relaxed(st->iccr, iobase + ICCR);
writel_relaxed(st->iclr, iobase + ICLR);
ICMR = st->icmr;
writel_relaxed(st->icmr, iobase + ICMR);
}
}
......@@ -140,8 +137,8 @@ sa1100_handle_irq(struct pt_regs *regs)
uint32_t icip, icmr, mask;
do {
icip = (ICIP);
icmr = (ICMR);
icip = readl_relaxed(iobase + ICIP);
icmr = readl_relaxed(iobase + ICMR);
mask = icip & icmr;
if (mask == 0)
......@@ -152,27 +149,27 @@ sa1100_handle_irq(struct pt_regs *regs)
} while (1);
}
void __init sa1100_init_irq(void)
void __init sa11x0_init_irq_nodt(int irq_start, resource_size_t io_start)
{
request_resource(&iomem_resource, &irq_resource);
iobase = ioremap(io_start, SZ_64K);
if (WARN_ON(!iobase))
return;
/* disable all IRQs */
ICMR = 0;
writel_relaxed(0, iobase + ICMR);
/* all IRQs are IRQ, not FIQ */
ICLR = 0;
writel_relaxed(0, iobase + ICLR);
/*
* Whatever the doc says, this has to be set for the wait-on-irq
* instruction to work... on a SA1100 rev 9 at least.
*/
ICCR = 1;
writel_relaxed(1, iobase + ICCR);
sa1100_normal_irqdomain = irq_domain_add_simple(NULL,
32, IRQ_GPIO0_SC,
32, irq_start,
&sa1100_normal_irqdomain_ops, NULL);
set_handle_irq(sa1100_handle_irq);
sa1100_init_gpio();
}
#ifndef __CLKSOURCE_TIMER_SP804_H
#define __CLKSOURCE_TIMER_SP804_H
struct clk;
void __sp804_clocksource_and_sched_clock_init(void __iomem *,
const char *, struct clk *, int);
void __sp804_clockevents_init(void __iomem *, unsigned int,
struct clk *, const char *);
void sp804_timer_disable(void __iomem *);
static inline void sp804_clocksource_init(void __iomem *base, const char *name)
{
......@@ -21,3 +25,4 @@ static inline void sp804_clockevents_init(void __iomem *base, unsigned int irq,
__sp804_clockevents_init(base, irq, NULL, name);
}
#endif
/*
* Generic IRQ handling for the SA11x0.
*
* Copyright (C) 2015 Dmitry Eremin-Solenikov
* Copyright (C) 1999-2001 Nicolas Pitre
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_SA11x0_H
#define __INCLUDE_LINUX_IRQCHIP_IRQ_SA11x0_H
void __init sa11x0_init_irq_nodt(int irq_start, resource_size_t io_start);
#endif
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment