regulator: lm363x: Let core handle GPIO descriptor

Use the gpiod_get() rather than the devm_* version so that the
regulator core can handle the lifecycle of these descriptors.

Fixes: b2d751b7 ("regulator: lm363x: Pass descriptor instead of GPIO number")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

drivers/regulator/lm363x-regulator.c

@@ -224,13 +224,15 @@ static struct gpio_desc *lm363x_regulator_of_get_enable_gpio(struct device *dev,
 	/*
 	 * Check LCM_EN1/2_GPIO is configured.
 	 * Those pins are used for enabling VPOS/VNEG LDOs.
+	 * Do not use devm* here: the regulator core takes over the
+	 * lifecycle management of the GPIO descriptor.
 	 */
 	switch (id) {
 	case LM3632_LDO_POS:
-		return devm_gpiod_get_index_optional(dev, "enable", 0,
+		return gpiod_get_index_optional(dev, "enable", 0,
 				GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
 	case LM3632_LDO_NEG:
-		return devm_gpiod_get_index_optional(dev, "enable", 1,
+		return gpiod_get_index_optional(dev, "enable", 1,
 				GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
 	default:
 		return NULL;
@@ -263,6 +265,8 @@ static int lm363x_regulator_probe(struct platform_device *pdev)
 					 LM3632_EXT_EN_MASK,
 					 LM3632_EXT_EN_MASK);
 		if (ret) {
+			if (gpiod)
+				gpiod_put(gpiod);
 			dev_err(dev, "External pin err: %d\n", ret);
 			return ret;
 		}