Input: add support for Kionix KXTJ9 accelerometer

Signed-off-by: Chris Hudson <chudson@kionix.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

drivers/input/misc/Kconfig

@@ -230,6 +230,23 @@ config INPUT_KEYSPAN_REMOTE
 	  To compile this driver as a module, choose M here: the module will
 	  be called keyspan_remote.
 
+config INPUT_KXTJ9
+	tristate "Kionix KXTJ9 tri-axis digital accelerometer"
+	depends on I2C
+	help
+	  Say Y here to enable support for the Kionix KXTJ9 digital tri-axis
+	  accelerometer.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called kxtj9.
+
+config INPUT_KXTJ9_POLLED_MODE
+	bool "Enable polling mode support"
+	depends on INPUT_KXTJ9
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you need accelerometer to work in polling mode.
+
 config INPUT_POWERMATE
 	tristate "Griffin PowerMate and Contour Jog support"
 	depends on USB_ARCH_HAS_HCD

drivers/input/misc/Makefile

@@ -25,6 +25,7 @@ obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
 obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
 obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
+obj-$(CONFIG_INPUT_KXTJ9)		+= kxtj9.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
 obj-$(CONFIG_INPUT_MAX8925_ONKEY)	+= max8925_onkey.o
 obj-$(CONFIG_INPUT_MMA8450)		+= mma8450.o

include/linux/input/kxtj9.h

+/*
+ * Copyright (C) 2011 Kionix, Inc.
+ * Written by Chris Hudson <chudson@kionix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#ifndef __KXTJ9_H__
+#define __KXTJ9_H__
+
+#define KXTJ9_I2C_ADDR		0x0F
+
+struct kxtj9_platform_data {
+	unsigned int min_interval;	/* minimum poll interval (in milli-seconds) */
+
+	/*
+	 * By default, x is axis 0, y is axis 1, z is axis 2; these can be
+	 * changed to account for sensor orientation within the host device.
+	 */
+	u8 axis_map_x;
+	u8 axis_map_y;
+	u8 axis_map_z;
+
+	/*
+	 * Each axis can be negated to account for sensor orientation within
+	 * the host device.
+	 */
+	bool negate_x;
+	bool negate_y;
+	bool negate_z;
+
+	/* CTRL_REG1: set resolution, g-range, data ready enable */
+	/* Output resolution: 8-bit valid or 12-bit valid */
+	#define RES_8BIT		0
+	#define RES_12BIT		(1 << 6)
+	u8 res_12bit;
+	/* Output g-range: +/-2g, 4g, or 8g */
+	#define KXTJ9_G_2G		0
+	#define KXTJ9_G_4G		(1 << 3)
+	#define KXTJ9_G_8G		(1 << 4)
+	u8 g_range;
+
+	/* DATA_CTRL_REG: controls the output data rate of the part */
+	#define ODR12_5F		0
+	#define ODR25F			1
+	#define ODR50F			2
+	#define ODR100F			3
+	#define ODR200F			4
+	#define ODR400F			5
+	#define ODR800F			6
+	u8 data_odr_init;
+
+	int (*init)(void);
+	void (*exit)(void);
+	int (*power_on)(void);
+	int (*power_off)(void);
+};
+#endif  /* __KXTJ9_H__ */