ARM: omap1: move mach/usb.h to include/linux/soc

The register definitions in this header are used in at least four
different places, with little hope of completely cleaning that up.

Split up the file into a portion that becomes a linux-wide header
under include/linux/soc/ti/, and the parts that are actually only
needed by board files.
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-omap1/board-ams-delta.c

@@ -38,7 +38,7 @@
 #include <mach/mux.h>
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"

arch/arm/mach-omap1/board-generic.c

@@ -21,7 +21,7 @@
 
 #include <mach/mux.h>
 
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 

arch/arm/mach-omap1/board-h2.c

@@ -42,7 +42,7 @@
 #include "flash.h"
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 #include "board-h2.h"

arch/arm/mach-omap1/board-h3.c

@@ -45,7 +45,7 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 #include "board-h3.h"

arch/arm/mach-omap1/board-htcherald.c

@@ -31,7 +31,7 @@
 #include "mmc.h"
 
 #include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 

arch/arm/mach-omap1/board-innovator.c

@@ -34,7 +34,7 @@
 #include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "iomap.h"
 #include "common.h"

arch/arm/mach-omap1/board-nokia770.c

@@ -31,7 +31,7 @@
 #include <mach/mux.h>
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 #include "clock.h"

arch/arm/mach-omap1/board-osk.c

@@ -52,7 +52,7 @@
 #include <mach/tc.h>
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 

arch/arm/mach-omap1/board-palmte.c

@@ -38,7 +38,7 @@
 #include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "mmc.h"
 #include "common.h"

arch/arm/mach-omap1/board-palmtt.c

@@ -38,7 +38,7 @@
 #include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 

arch/arm/mach-omap1/board-palmz71.c

@@ -40,7 +40,7 @@
 #include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 

arch/arm/mach-omap1/board-sx1.c

@@ -38,7 +38,7 @@
 #include "board-sx1.h"
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 

arch/arm/mach-omap1/clock_data.c

@@ -22,7 +22,7 @@
 #include "soc.h"
 
 #include <mach/hardware.h>
-#include <mach/usb.h>   /* for OTG_BASE */
+#include "usb.h"   /* for OTG_BASE */
 
 #include "iomap.h"
 #include "clock.h"

arch/arm/mach-omap1/usb.c

@@ -17,7 +17,7 @@
 
 #include <mach/mux.h>
 
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 

arch/arm/mach-omap1/usb.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * fixme correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+#define	is_usb0_device(config)	1
+#else
+#define	is_usb0_device(config)	0
+#endif
+
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#define OMAP1_OHCI_BASE			0xfffba000
+#define OMAP2_OHCI_BASE			0x4805e000
+#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE

drivers/usb/gadget/udc/omap_udc.c

@@ -40,8 +40,9 @@
 #include <asm/mach-types.h>
 
 #include <linux/omap-dma.h>
+#include <linux/platform_data/usb-omap1.h>
 
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
 
 #include "omap_udc.h"
 

drivers/usb/host/ohci-omap.c

@@ -25,6 +25,8 @@
 #include <linux/module.h>
 #include <linux/usb/otg.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
 #include <linux/signal.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
@@ -37,8 +39,6 @@
 #include <mach/mux.h>
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
-
 
 #define DRIVER_DESC "OHCI OMAP driver"
 

drivers/usb/phy/phy-isp1301-omap.c

@@ -25,7 +25,7 @@
 
 #include <mach/mux.h>
 
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
 
 #undef VERBOSE
 

arch/arm/mach-omap1/include/mach/usb.h → include/linux/soc/ti/omap1-usb.h

 /* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SOC_TI_OMAP1_USB
+#define __SOC_TI_OMAP1_USB
 /*
- * FIXME correct answer depends on hmc_mode,
- * as does (on omap1) any nonzero value for config->otg port number
+ * Constants in this file are used all over the place, in platform
+ * code, as well as the udc, phy and ohci drivers.
+ * This is not a great design, but unlikely to get fixed after
+ * such a long time. Don't do this elsewhere.
  */
-#if IS_ENABLED(CONFIG_USB_OMAP)
-#define	is_usb0_device(config)	1
-#else
-#define	is_usb0_device(config)	0
-#endif
-
-#include <linux/platform_data/usb-omap1.h>
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-void omap1_usb_init(struct omap_usb_config *pdata);
-#else
-static inline void omap1_usb_init(struct omap_usb_config *pdata)
-{
-}
-#endif
 
 #define OMAP1_OTG_BASE			0xfffb0400
 #define OMAP1_UDC_BASE			0xfffb4000
-#define OMAP1_OHCI_BASE			0xfffba000
 
-#define OMAP2_OHCI_BASE			0x4805e000
 #define OMAP2_UDC_BASE			0x4805e200
 #define OMAP2_OTG_BASE			0x4805e300
 #define OTG_BASE			OMAP1_OTG_BASE
 #define UDC_BASE			OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
 
 /*
  * OTG and transceiver registers, for OMAPs starting with ARM926
@@ -126,3 +112,5 @@ static inline void omap1_usb_init(struct omap_usb_config *pdata)
 #	define	CONF_USB0_ISOLATE_R	(1 << 3)
 #	define	CONF_USB_PWRDN_DM_R	(1 << 2)
 #	define	CONF_USB_PWRDN_DP_R	(1 << 1)
+
+#endif