ARC: [nsimosci] move peripherals to match model to FPGA

This allows the sdplite/Zebu images to run on OSCI simulation platform
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: <stable@vger.kernel.org> #3.10, 3.12, 3.14, 3.16

arch/arc/boot/dts/nsimosci.dts

@@ -20,7 +20,7 @@ chosen {
 		/* this is for console on PGU */
 		/* bootargs = "console=tty0 consoleblank=0"; */
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xc0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug";
 	};
 
 	aliases {
@@ -41,9 +41,9 @@ intc: interrupt-controller {
 			#interrupt-cells = <1>;
 		};
 
-		uart0: serial@c0000000 {
+		uart0: serial@f0000000 {
 			compatible = "ns8250";
-			reg = <0xc0000000 0x2000>;
+			reg = <0xf0000000 0x2000>;
 			interrupts = <11>;
 			clock-frequency = <3686400>;
 			baud = <115200>;
@@ -52,21 +52,21 @@ uart0: serial@c0000000 {
 			no-loopback-test = <1>;
 		};
 
-		pgu0: pgu@c9000000 {
+		pgu0: pgu@f9000000 {
 			compatible = "snps,arcpgufb";
-			reg = <0xc9000000 0x400>;
+			reg = <0xf9000000 0x400>;
 		};
 
-		ps2: ps2@c9001000 {
+		ps2: ps2@f9001000 {
 			compatible = "snps,arc_ps2";
-			reg = <0xc9000400 0x14>;
+			reg = <0xf9000400 0x14>;
 			interrupts = <13>;
 			interrupt-names = "arc_ps2_irq";
 		};
 
-		eth0: ethernet@c0003000 {
+		eth0: ethernet@f0003000 {
 			compatible = "snps,oscilan";
-			reg = <0xc0003000 0x44>;
+			reg = <0xf0003000 0x44>;
 			interrupts = <7>, <8>;
 			interrupt-names = "rx", "tx";
 		};