arm64: dts: rockchip: Add rk3588-evb1 board

Add board file for the RK3588 evaluation board. While the hardware
offers plenty of peripherals and connectivity this basic implementation
just handles things required to successfully boot Linux from eMMC,
connect via UART or Ethernet.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[rebase, update commit message, use EVB1 for SoC bringup]
Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230109155801.51642-6-sebastian.reichel@collabora.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm64/boot/dts/rockchip/Makefile

@@ -86,3 +86,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb

arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "Rockchip RK3588 EVB1 V10 Board";
+	compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc12v_dcin>;
+		pwms = <&pwm2 0 25000 0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	pinctrl-names = "default";
+	rx_delay = <0x00>;
+	tx_delay = <0x43>;
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@1 {
+		/* RTL8211F */
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	rtl8211f {
+		rtl8211f_rst: rtl8211f-rst {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};