Commit e96165a3 authored by Linus Walleij's avatar Linus Walleij Committed by Andy Gross

ARM: defconfig: qcom: add APQ8060 DragonBoard devices

This default-enables the devices found on the APQ8060 DragonBoard
in the qcom_defconfig:

- EBI2 bus
- SMSC911x ethernet
- LEDs class and PM8058 LEDs driver, trigger and heartbeat
  trigger (so we get heartbeat on the board by default)
- IIO framework, including the HRTimer trigger, KXSD9
  accelerometer, MPU3050 gyroscope, AK8975 magnetometer and
  BMP085 pressure sensor
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarAndy Gross <andy.gross@linaro.org>
parent a0f9419c
...@@ -58,6 +58,7 @@ CONFIG_CFG80211=y ...@@ -58,6 +58,7 @@ CONFIG_CFG80211=y
CONFIG_RFKILL=y CONFIG_RFKILL=y
CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y CONFIG_DEVTMPFS_MOUNT=y
CONFIG_QCOM_EBI2=y
CONFIG_MTD=y CONFIG_MTD=y
CONFIG_MTD_BLOCK=y CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y CONFIG_MTD_M25P80=y
...@@ -78,6 +79,7 @@ CONFIG_NETDEVICES=y ...@@ -78,6 +79,7 @@ CONFIG_NETDEVICES=y
CONFIG_DUMMY=y CONFIG_DUMMY=y
CONFIG_ATL1C=y CONFIG_ATL1C=y
CONFIG_KS8851=y CONFIG_KS8851=y
CONFIG_SMSC911X=y
CONFIG_MDIO_BITBANG=y CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_GPIO=y CONFIG_MDIO_GPIO=y
CONFIG_SLIP=y CONFIG_SLIP=y
...@@ -165,6 +167,12 @@ CONFIG_MMC_QCOM_DML=y ...@@ -165,6 +167,12 @@ CONFIG_MMC_QCOM_DML=y
CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_MSM=y CONFIG_MMC_SDHCI_MSM=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PM8058=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PM8XXX=y CONFIG_RTC_DRV_PM8XXX=y
CONFIG_DMADEVICES=y CONFIG_DMADEVICES=y
...@@ -187,6 +195,14 @@ CONFIG_QCOM_PM=y ...@@ -187,6 +195,14 @@ CONFIG_QCOM_PM=y
CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMEM=y
CONFIG_QCOM_SMD=y CONFIG_QCOM_SMD=y
CONFIG_QCOM_SMD_RPM=y CONFIG_QCOM_SMD_RPM=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_SW_TRIGGER=y
CONFIG_KXSD9=y
CONFIG_MPU3050_I2C=y
CONFIG_AK8975=y
CONFIG_IIO_HRTIMER_TRIGGER=y
CONFIG_BMP280=y
CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_QCOM_APQ8064_SATA=y
CONFIG_PHY_QCOM_IPQ806X_SATA=y CONFIG_PHY_QCOM_IPQ806X_SATA=y
CONFIG_NVMEM=y CONFIG_NVMEM=y
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment