Commit e9b65ecb authored by Felix Fietkau's avatar Felix Fietkau Committed by David S. Miller

arm64: dts: mediatek: mt7622: introduce nodes for Wireless Ethernet Dispatch

Introduce wed0 and wed1 nodes in order to enable offloading forwarding
between ethernet and wireless devices on the mt7622 chipset.
Signed-off-by: default avatarFelix Fietkau <nbd@nbd.name>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a333215e
...@@ -901,6 +901,11 @@ sata_port: sata-phy@1a243000 { ...@@ -901,6 +901,11 @@ sata_port: sata-phy@1a243000 {
}; };
}; };
hifsys: syscon@1af00000 {
compatible = "mediatek,mt7622-hifsys", "syscon";
reg = <0 0x1af00000 0 0x70>;
};
ethsys: syscon@1b000000 { ethsys: syscon@1b000000 {
compatible = "mediatek,mt7622-ethsys", compatible = "mediatek,mt7622-ethsys",
"syscon"; "syscon";
...@@ -919,6 +924,26 @@ hsdma: dma-controller@1b007000 { ...@@ -919,6 +924,26 @@ hsdma: dma-controller@1b007000 {
#dma-cells = <1>; #dma-cells = <1>;
}; };
pcie_mirror: pcie-mirror@10000400 {
compatible = "mediatek,mt7622-pcie-mirror",
"syscon";
reg = <0 0x10000400 0 0x10>;
};
wed0: wed@1020a000 {
compatible = "mediatek,mt7622-wed",
"syscon";
reg = <0 0x1020a000 0 0x1000>;
interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_LOW>;
};
wed1: wed@1020b000 {
compatible = "mediatek,mt7622-wed",
"syscon";
reg = <0 0x1020b000 0 0x1000>;
interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_LOW>;
};
eth: ethernet@1b100000 { eth: ethernet@1b100000 {
compatible = "mediatek,mt7622-eth", compatible = "mediatek,mt7622-eth",
"mediatek,mt2701-eth", "mediatek,mt2701-eth",
...@@ -946,6 +971,9 @@ eth: ethernet@1b100000 { ...@@ -946,6 +971,9 @@ eth: ethernet@1b100000 {
mediatek,ethsys = <&ethsys>; mediatek,ethsys = <&ethsys>;
mediatek,sgmiisys = <&sgmiisys>; mediatek,sgmiisys = <&sgmiisys>;
mediatek,cci-control = <&cci_control2>; mediatek,cci-control = <&cci_control2>;
mediatek,wed = <&wed0>, <&wed1>;
mediatek,pcie-mirror = <&pcie_mirror>;
mediatek,hifsys = <&hifsys>;
dma-coherent; dma-coherent;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment