crypto: hisilicon - enable hpre device clock gating

Kunpeng930 hpre device supports dynamic clock gating. When doing tasks,
the algorithm core is opened, and when idle, the algorithm core is closed.
This patch enables hpre dynamic clock gating by writing hardware registers.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/hisilicon/hpre/hpre_main.c

@@ -81,6 +81,16 @@
 #define HPRE_PREFETCH_DISABLE		BIT(30)
 #define HPRE_SVA_DISABLE_READY		(BIT(4) | BIT(8))
 
+/* clock gate */
+#define HPRE_CLKGATE_CTL		0x301a10
+#define HPRE_PEH_CFG_AUTO_GATE		0x301a2c
+#define HPRE_CLUSTER_DYN_CTL		0x302010
+#define HPRE_CORE_SHB_CFG		0x302088
+#define HPRE_CLKGATE_CTL_EN		BIT(0)
+#define HPRE_PEH_CFG_AUTO_GATE_EN	BIT(0)
+#define HPRE_CLUSTER_DYN_CTL_EN		BIT(0)
+#define HPRE_CORE_GATE_EN		(BIT(30) | BIT(31))
+
 #define HPRE_AM_OOO_SHUTDOWN_ENB	0x301044
 #define HPRE_AM_OOO_SHUTDOWN_ENABLE	BIT(0)
 #define HPRE_WR_MSI_PORT		BIT(2)
@@ -417,12 +427,63 @@ static void hpre_close_sva_prefetch(struct hisi_qm *qm)
 		pci_err(qm->pdev, "failed to close sva prefetch\n");
 }
 
+static void hpre_enable_clock_gate(struct hisi_qm *qm)
+{
+	u32 val;
+
+	if (qm->ver < QM_HW_V3)
+		return;
+
+	val = readl(qm->io_base + HPRE_CLKGATE_CTL);
+	val |= HPRE_CLKGATE_CTL_EN;
+	writel(val, qm->io_base + HPRE_CLKGATE_CTL);
+
+	val = readl(qm->io_base + HPRE_PEH_CFG_AUTO_GATE);
+	val |= HPRE_PEH_CFG_AUTO_GATE_EN;
+	writel(val, qm->io_base + HPRE_PEH_CFG_AUTO_GATE);
+
+	val = readl(qm->io_base + HPRE_CLUSTER_DYN_CTL);
+	val |= HPRE_CLUSTER_DYN_CTL_EN;
+	writel(val, qm->io_base + HPRE_CLUSTER_DYN_CTL);
+
+	val = readl_relaxed(qm->io_base + HPRE_CORE_SHB_CFG);
+	val |= HPRE_CORE_GATE_EN;
+	writel(val, qm->io_base + HPRE_CORE_SHB_CFG);
+}
+
+static void hpre_disable_clock_gate(struct hisi_qm *qm)
+{
+	u32 val;
+
+	if (qm->ver < QM_HW_V3)
+		return;
+
+	val = readl(qm->io_base + HPRE_CLKGATE_CTL);
+	val &= ~HPRE_CLKGATE_CTL_EN;
+	writel(val, qm->io_base + HPRE_CLKGATE_CTL);
+
+	val = readl(qm->io_base + HPRE_PEH_CFG_AUTO_GATE);
+	val &= ~HPRE_PEH_CFG_AUTO_GATE_EN;
+	writel(val, qm->io_base + HPRE_PEH_CFG_AUTO_GATE);
+
+	val = readl(qm->io_base + HPRE_CLUSTER_DYN_CTL);
+	val &= ~HPRE_CLUSTER_DYN_CTL_EN;
+	writel(val, qm->io_base + HPRE_CLUSTER_DYN_CTL);
+
+	val = readl_relaxed(qm->io_base + HPRE_CORE_SHB_CFG);
+	val &= ~HPRE_CORE_GATE_EN;
+	writel(val, qm->io_base + HPRE_CORE_SHB_CFG);
+}
+
 static int hpre_set_user_domain_and_cache(struct hisi_qm *qm)
 {
 	struct device *dev = &qm->pdev->dev;
 	u32 val;
 	int ret;
 
+	/* disabel dynamic clock gate before sram init */
+	hpre_disable_clock_gate(qm);
+
 	writel(HPRE_QM_USR_CFG_MASK, qm->io_base + QM_ARUSER_M_CFG_ENABLE);
 	writel(HPRE_QM_USR_CFG_MASK, qm->io_base + QM_AWUSER_M_CFG_ENABLE);
 	writel_relaxed(HPRE_QM_AXI_CFG_MASK, qm->io_base + QM_AXI_M_CFG);
@@ -473,6 +534,8 @@ static int hpre_set_user_domain_and_cache(struct hisi_qm *qm)
 	/* Config data buffer pasid needed by Kunpeng 920 */
 	hpre_config_pasid(qm);
 
+	hpre_enable_clock_gate(qm);
+
 	return ret;
 }