Commit ea93fd94 authored by Yegor Yefremov's avatar Yegor Yefremov Committed by David S. Miller

KS8695: update ksp->next_rx_desc_read at the end of rx loop

There is no need to adjust the next rx descriptor after each packet,
so do it only once at the end of the routine.
Signed-off-by: default avatarEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: default avatarYegor Yefremov <yegorslists@googlemail.com>
parent b894fa26
......@@ -451,9 +451,8 @@ ks8695_rx_irq(int irq, void *dev_id)
/**
* ks8695_rx - Receive packets called by NAPI poll method
* @ksp: Private data for the KS8695 Ethernet
* @budget: The max packets would be receive
* @budget: Number of packets allowed to process
*/
static int ks8695_rx(struct ks8695_priv *ksp, int budget)
{
struct net_device *ndev = ksp->ndev;
......@@ -461,7 +460,6 @@ static int ks8695_rx(struct ks8695_priv *ksp, int budget)
int buff_n;
u32 flags;
int pktlen;
int last_rx_processed = -1;
int received = 0;
buff_n = ksp->next_rx_desc_read;
......@@ -471,6 +469,7 @@ static int ks8695_rx(struct ks8695_priv *ksp, int budget)
cpu_to_le32(RDES_OWN)))) {
rmb();
flags = le32_to_cpu(ksp->rx_ring[buff_n].status);
/* Found an SKB which we own, this means we
* received a packet
*/
......@@ -533,23 +532,18 @@ static int ks8695_rx(struct ks8695_priv *ksp, int budget)
ksp->rx_ring[buff_n].status = cpu_to_le32(RDES_OWN);
rx_finished:
received++;
/* And note this as processed so we can start
* from here next time
*/
last_rx_processed = buff_n;
buff_n = (buff_n + 1) & MAX_RX_DESC_MASK;
/*And note which RX descriptor we last did */
if (likely(last_rx_processed != -1))
ksp->next_rx_desc_read =
(last_rx_processed + 1) &
MAX_RX_DESC_MASK;
}
/* And note which RX descriptor we last did */
ksp->next_rx_desc_read = buff_n;
/* And refill the buffers */
ks8695_refill_rxbuffers(ksp);
/* Kick the RX DMA engine, in case it became
* suspended */
/* Kick the RX DMA engine, in case it became suspended */
ks8695_writereg(ksp, KS8695_DRSC, 0);
return received;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment