[PATCH] PCI: Spelling fixes for drivers/pci.

Here are some spelling corrections for drivers/pci.

CONTROLER -> CONTROLLER
Regisetr -> Register
harware -> hardware
inital -> initial
Initilize -> Initialize
funtion -> function
funciton -> function
occured -> occurred
Signed-off-by: Steven Cole <elenstev@mesatop.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/pci/hotplug/ibmphp.h

@@ -196,7 +196,7 @@ struct ebda_hpc_bus {
 
 
 /********************************************************************
-*   THREE TYPE OF HOT PLUG CONTROLER                                *
+*   THREE TYPE OF HOT PLUG CONTROLLER                                *
 ********************************************************************/
 
 struct isa_ctlr_access {

drivers/pci/hotplug/ibmphp_hpc.c

@@ -64,7 +64,7 @@ static int to_debug = FALSE;
 #define WPG_I2C_OR		0x2000	// I2C OR operation
 
 //----------------------------------------------------------------------------
-// Command set for I2C Master Operation Setup Regisetr
+// Command set for I2C Master Operation Setup Register
 //----------------------------------------------------------------------------
 #define WPG_READATADDR_MASK	0x00010000	// read,bytes,I2C shifted,index
 #define WPG_WRITEATADDR_MASK	0x40010000	// write,bytes,I2C shifted,index
@@ -835,7 +835,7 @@ static void poll_hpc (void)
 		if (ibmphp_shutdown) 
 			break;
 		
-		/* try to get the lock to do some kind of harware access */
+		/* try to get the lock to do some kind of hardware access */
 		down (&semOperations);
 
 		switch (poll_state) {
@@ -906,7 +906,7 @@ static void poll_hpc (void)
 				poll_state = POLL_LATCH_REGISTER;
 			break;
 		}	
-		/* give up the harware semaphore */
+		/* give up the hardware semaphore */
 		up (&semOperations);
 		/* sleep for a short time just for good measure */
 		msleep(100);

drivers/pci/hotplug/pci_hotplug.h

@@ -150,7 +150,7 @@ struct hotplug_slot_info {
  * @name: the name of the slot being registered.  This string must
  * be unique amoung slots registered on this system.
  * @ops: pointer to the &struct hotplug_slot_ops to be used for this slot
- * @info: pointer to the &struct hotplug_slot_info for the inital values for
+ * @info: pointer to the &struct hotplug_slot_info for the initial values for
  * this slot.
  * @release: called during pci_hp_deregister to free memory allocated in a
  * hotplug_slot structure.

drivers/pci/hotplug/pcihp_skeleton.c

@@ -297,7 +297,7 @@ static int __init init_slots(void)
 		hotplug_slot->ops = &skel_hotplug_slot_ops;
 		
 		/*
-		 * Initilize the slot info structure with some known
+		 * Initialize the slot info structure with some known
 		 * good values.
 		 */
 		info->power_status = get_power_status(slot);

drivers/pci/msi.c

@@ -522,7 +522,7 @@ void pci_scan_msi_device(struct pci_dev *dev)
  * msi_capability_init - configure device's MSI capability structure
  * @dev: pointer to the pci_dev data structure of MSI device function
  *
- * Setup the MSI capability structure of device funtion with a single
+ * Setup the MSI capability structure of device function with a single
  * MSI vector, regardless of device function is capable of handling
  * multiple messages. A return of zero indicates the successful setup
  * of an entry zero with the new MSI vector or non-zero for otherwise.
@@ -599,7 +599,7 @@ static int msi_capability_init(struct pci_dev *dev)
  * msix_capability_init - configure device's MSI-X capability
  * @dev: pointer to the pci_dev data structure of MSI-X device function
  *
- * Setup the MSI-X capability structure of device funtion with a
+ * Setup the MSI-X capability structure of device function with a
  * single MSI-X vector. A return of zero indicates the successful setup of
  * requested MSI-X entries with allocated vectors or non-zero for otherwise.
  **/
@@ -1074,7 +1074,7 @@ void pci_disable_msix(struct pci_dev* dev)
  * msi_remove_pci_irq_vectors - reclaim MSI(X) vectors to unused state
  * @dev: pointer to the pci_dev data structure of MSI(X) device function
  *
- * Being called during hotplug remove, from which the device funciton
+ * Being called during hotplug remove, from which the device function
  * is hot-removed. All previous assigned MSI/MSI-X vectors, if
  * allocated for this device function, are reclaimed to unused state,
  * which may be used later on.

drivers/pci/pci-driver.c

@@ -381,7 +381,7 @@ pci_populate_driver_dir(struct pci_driver *drv)
  * 
  * Adds the driver structure to the list of registered drivers.
  * Returns a negative value on error, otherwise 0. 
- * If no error occured, the driver remains registered even if 
+ * If no error occurred, the driver remains registered even if 
  * no device was claimed during registration.
  */
 int pci_register_driver(struct pci_driver *drv)