Merge http://lia64.bkbits.net/to-linus-2.5

into home.osdl.org:/home/torvalds/v2.5/linux

Documentation/ia64/fsys.txt

@@ -4,7 +4,7 @@
 		-----------------------------------
 
 		        Started: 13-Jan-2003
-		    Last update: 11-Feb-2003
+		    Last update: 27-Sep-2003
 
 	              David Mosberger-Tang
 		      <davidm@hpl.hp.com>
@@ -146,6 +146,12 @@ speed comes a set of restrictions:
    task pointer is not considered sensitive: it's already exposed
    through ar.k6).
 
+ o Fsyscall-handlers MUST NOT access user-memory without first
+   validating access-permission (this can be done typically via
+   probe.r.fault and/or probe.w.fault) and without guarding against
+   memory access exceptions (this can be done with the EX() macros
+   defined by asmmacro.h).
+
 The above restrictions may seem draconian, but remember that it's
 possible to trade off some of the restrictions by paying a slightly
 higher overhead.  For example, if an fsyscall-handler could benefit
@@ -229,3 +235,52 @@ PSR.ed	Unchanged.  Note: This bit could only have an effect if an fsys-mode
 PSR.bn	Unchanged.  Note: fsys-mode handlers may clear the bit, if needed.
 	Doing so requires clearing PSR.i and PSR.ic as well.
 PSR.ia	Unchanged.  Note: the ia64 linux kernel never sets this bit.
+
+* Using fast system calls
+
+To use fast system calls, userspace applications need simply call
+__kernel_syscall_via_epc().  For example
+
+-- example fgettimeofday() call --
+-- fgettimeofday.S --
+
+#include <asm/asmmacro.h>
+
+GLOBAL_ENTRY(fgettimeofday)
+.prologue
+.save ar.pfs, r11
+mov r11 = ar.pfs
+.body 
+
+mov r2 = 0xa000000000020660;;  // gate address 
+			       // found by inspection of System.map for the 
+			       // __kernel_syscall_via_epc() function.  See
+			       // below for how to do this for real.
+
+mov b7 = r2
+mov r15 = 1087		       // gettimeofday syscall
+;;
+br.call.sptk.many b6 = b7
+;;
+
+.restore sp
+
+mov ar.pfs = r11
+br.ret.sptk.many rp;;	      // return to caller
+END(fgettimeofday)
+
+-- end fgettimeofday.S --
+
+In reality, getting the gate address is accomplished by two extra
+values passed via the ELF auxiliary vector (include/asm-ia64/elf.h)
+
+ o AT_SYSINFO : is the address of __kernel_syscall_via_epc()
+ o AT_SYSINFO_EHDR : is the address of the kernel gate ELF DSO
+
+The ELF DSO is a pre-linked library that is mapped in by the kernel at
+the gate page.  It is a proper ELF shared object so, with a dynamic
+loader that recognises the library, you should be able to make calls to
+the exported functions within it as with any other shared library.
+AT_SYSINFO points into the kernel DSO at the
+__kernel_syscall_via_epc() function for historical reasons (it was
+used before the kernel DSO) and as a convenience.

arch/ia64/Kconfig

@@ -57,6 +57,10 @@ choice
 
 config IA64_GENERIC
 	bool "generic"
+	select NUMA
+	select ACPI_NUMA
+	select VIRTUAL_MEM_MAP
+	select DISCONTIGMEM
 	---help---
 	  This selects the system type of your hardware.  A "generic" kernel
 	  will run on any supported IA-64 system.  However, if you configure

arch/ia64/kernel/acpi.c

@@ -56,6 +56,7 @@ void (*pm_idle) (void);
 void (*pm_power_off) (void);
 
 unsigned char acpi_kbd_controller_present = 1;
+unsigned char acpi_legacy_devices;
 
 int acpi_disabled;	/* XXX this shouldn't be needed---we can't boot without ACPI! */
 
@@ -509,6 +510,9 @@ acpi_parse_fadt (unsigned long phys_addr, unsigned long size)
 	if (!(fadt->iapc_boot_arch & BAF_8042_KEYBOARD_CONTROLLER))
 		acpi_kbd_controller_present = 0;
 
+	if (fadt->iapc_boot_arch & BAF_LEGACY_DEVICES)
+		acpi_legacy_devices = 1;
+
 	acpi_register_irq(fadt->sci_int, ACPI_ACTIVE_LOW, ACPI_LEVEL_SENSITIVE);
 	return 0;
 }

arch/ia64/kernel/asm-offsets.c

@@ -33,16 +33,30 @@ void foo(void)
 
 	BLANK();
 
+	DEFINE(IA64_TASK_BLOCKED_OFFSET,offsetof (struct task_struct, blocked));
 	DEFINE(IA64_TASK_CLEAR_CHILD_TID_OFFSET,offsetof (struct task_struct, clear_child_tid));
 	DEFINE(IA64_TASK_GROUP_LEADER_OFFSET, offsetof (struct task_struct, group_leader));
+	DEFINE(IA64_TASK_PENDING_OFFSET,offsetof (struct task_struct, pending));
 	DEFINE(IA64_TASK_PID_OFFSET, offsetof (struct task_struct, pid));
 	DEFINE(IA64_TASK_REAL_PARENT_OFFSET, offsetof (struct task_struct, real_parent));
+	DEFINE(IA64_TASK_SIGHAND_OFFSET,offsetof (struct task_struct, sighand));
+	DEFINE(IA64_TASK_SIGNAL_OFFSET,offsetof (struct task_struct, signal));
 	DEFINE(IA64_TASK_TGID_OFFSET, offsetof (struct task_struct, tgid));
 	DEFINE(IA64_TASK_THREAD_KSP_OFFSET, offsetof (struct task_struct, thread.ksp));
 	DEFINE(IA64_TASK_THREAD_ON_USTACK_OFFSET, offsetof (struct task_struct, thread.on_ustack));
 
 	BLANK();
 
+	DEFINE(IA64_SIGHAND_SIGLOCK_OFFSET,offsetof (struct sighand_struct, siglock));
+
+	BLANK();
+
+	DEFINE(IA64_SIGNAL_GROUP_STOP_COUNT_OFFSET,offsetof (struct signal_struct,
+							     group_stop_count));
+	DEFINE(IA64_SIGNAL_SHARED_PENDING_OFFSET,offsetof (struct signal_struct, shared_pending));
+
+	BLANK();
+
 	DEFINE(IA64_PT_REGS_B6_OFFSET, offsetof (struct pt_regs, b6));
 	DEFINE(IA64_PT_REGS_B7_OFFSET, offsetof (struct pt_regs, b7));
 	DEFINE(IA64_PT_REGS_AR_CSD_OFFSET, offsetof (struct pt_regs, ar_csd));
@@ -158,6 +172,10 @@ void foo(void)
 
 	BLANK();
 
+	DEFINE(IA64_SIGPENDING_SIGNAL_OFFSET, offsetof (struct sigpending, signal));
+
+	BLANK();
+
 	DEFINE(IA64_SIGFRAME_ARG0_OFFSET, offsetof (struct sigframe, arg0));
 	DEFINE(IA64_SIGFRAME_ARG1_OFFSET, offsetof (struct sigframe, arg1));
 	DEFINE(IA64_SIGFRAME_ARG2_OFFSET, offsetof (struct sigframe, arg2));

arch/ia64/kernel/fsys.S

@@ -4,6 +4,7 @@
  * Copyright (C) 2003 Hewlett-Packard Co
  * 	David Mosberger-Tang <davidm@hpl.hp.com>
  *
+ * 25-Sep-03 davidm	Implement fsys_rt_sigprocmask().
  * 18-Feb-03 louisk	Implement fsys_gettimeofday().
  * 28-Feb-03 davidm	Fixed several bugs in fsys_gettimeofday().  Tuned it some more,
  *			probably broke it along the way... ;-)
@@ -15,6 +16,7 @@
 #include <asm/percpu.h>
 #include <asm/thread_info.h>
 #include <asm/sal.h>
+#include <asm/signal.h>
 #include <asm/system.h>
 #include <asm/unistd.h>
 
@@ -48,8 +50,7 @@ ENTRY(fsys_ni_syscall)
 	.body
 	mov r8=ENOSYS
 	mov r10=-1
-	MCKINLEY_E9_WORKAROUND
-	br.ret.sptk.many b6
+	FSYS_RETURN
 END(fsys_ni_syscall)
 
 ENTRY(fsys_getpid)
@@ -66,8 +67,7 @@ ENTRY(fsys_getpid)
 	;;
 	cmp.ne p8,p0=0,r9
 (p8)	br.spnt.many fsys_fallback_syscall
-	MCKINLEY_E9_WORKAROUND
-	br.ret.sptk.many b6
+	FSYS_RETURN
 END(fsys_getpid)
 
 ENTRY(fsys_getppid)
@@ -114,8 +114,7 @@ ENTRY(fsys_getppid)
 	mov r18=0			// i must not leak kernel bits...
 	mov r19=0			// i must not leak kernel bits...
 #endif
-	MCKINLEY_E9_WORKAROUND
-	br.ret.sptk.many b6
+	FSYS_RETURN
 END(fsys_getppid)
 
 ENTRY(fsys_set_tid_address)
@@ -141,8 +140,7 @@ ENTRY(fsys_set_tid_address)
 	;;
 	mov r17=0			// i must not leak kernel bits...
 	mov r18=0			// i must not leak kernel bits...
-	MCKINLEY_E9_WORKAROUND
-	br.ret.sptk.many b6
+	FSYS_RETURN
 END(fsys_set_tid_address)
 
 /*
@@ -199,7 +197,7 @@ ENTRY(fsys_gettimeofday)
 
 	adds r10=IA64_CPUINFO_ITM_DELTA_OFFSET, r10
 (p7)	tnat.nz p6,p0=r33
-(p6)	br.cond.spnt.few .fail
+(p6)	br.cond.spnt.few .fail_einval
 
 	adds r8=IA64_CPUINFO_NSEC_PER_CYC_OFFSET, r3
 	movl r24=2361183241434822607	// for division hack (only for / 1000)
@@ -225,8 +223,8 @@ ENTRY(fsys_gettimeofday)
 	 * to store the result.  That's OK as long as the stores are also
 	 * protect by EX().
 	 */
-EX(.fail, probe.w.fault r32, 3)		// this must come _after_ NaT-check
-EX(.fail, probe.w.fault r10, 3)		// this must come _after_ NaT-check
+EX(.fail_efault, probe.w.fault r32, 3)		// this must come _after_ NaT-check
+EX(.fail_efault, probe.w.fault r10, 3)		// this must come _after_ NaT-check
 	nop 0
 
 	ldf8 f10=[r8]			// f10 <- local_cpu_data->nsec_per_cyc value
@@ -311,14 +309,13 @@ EX(.fail, probe.w.fault r10, 3)		// this must come _after_ NaT-check
 (p7)	br.spnt.many 1b
 
 	// finally: r2 = sec, r3 = usec
-EX(.fail, st8 [r32]=r2)
+EX(.fail_efault, st8 [r32]=r2)
 	adds r9=8, r32
 	mov r8=r0			// success
 	;;
-EX(.fail, st8 [r9]=r3)			// store them in the timeval struct
+EX(.fail_efault, st8 [r9]=r3)		// store them in the timeval struct
 	mov r10=0
-	MCKINLEY_E9_WORKAROUND
-	br.ret.sptk.many b6		// return to caller
+	FSYS_RETURN
 	/*
 	 * Note: We are NOT clearing the scratch registers here.  Since the only things
 	 *	 in those registers are time-related variables and some addresses (which
@@ -326,12 +323,183 @@ EX(.fail, st8 [r9]=r3)			// store them in the timeval struct
 	 *	 and we should be fine.
 	 */
 
-.fail:	adds r8=EINVAL, r0		// r8 = EINVAL
-	adds r10=-1, r0			// r10 = -1
-	MCKINLEY_E9_WORKAROUND
-	br.ret.spnt.many b6		// return with r8 set to EINVAL
+.fail_einval:
+	mov r8=EINVAL			// r8 = EINVAL
+	mov r10=-1			// r10 = -1
+	FSYS_RETURN
+
+.fail_efault:
+	mov r8=EFAULT			// r8 = EFAULT
+	mov r10=-1			// r10 = -1
+	FSYS_RETURN
 END(fsys_gettimeofday)
 
+/*
+ * long fsys_rt_sigprocmask (int how, sigset_t *set, sigset_t *oset, size_t sigsetsize).
+ */
+#if _NSIG_WORDS != 1
+# error Sorry, fsys_rt_sigprocmask() needs to be updated for _NSIG_WORDS != 1.
+#endif
+ENTRY(fsys_rt_sigprocmask)
+	.prologue
+	.altrp b6
+	.body
+
+	mf					// ensure reading of current->blocked is ordered
+	add r2=IA64_TASK_BLOCKED_OFFSET,r16
+	add r9=TI_FLAGS+IA64_TASK_SIZE,r16
+	;;
+	/*
+	 * Since we're only reading a single word, we can do it
+	 * atomically without acquiring current->sighand->siglock.  To
+	 * be on the safe side, we need a fully-ordered load, though:
+	 */
+	ld8.acq r3=[r2]				// read/prefetch current->blocked
+	ld4 r9=[r9]
+	add r31=IA64_TASK_SIGHAND_OFFSET,r16
+	;;
+#ifdef CONFIG_SMP
+	ld8 r31=[r31]				// r31 <- current->sighand
+#endif
+	and r9=TIF_ALLWORK_MASK,r9
+	tnat.nz p6,p0=r32
+	;;
+	cmp.ne p7,p0=0,r9
+	tnat.nz.or p6,p0=r35
+	tnat.nz p8,p0=r34
+	;;
+	cmp.ne p15,p0=r0,r34			// oset != NULL?
+	cmp.ne.or p6,p0=_NSIG_WORDS*8,r35
+	tnat.nz.or p8,p0=r33
+
+(p6)	br.spnt.few .fail_einval		// fail with EINVAL
+(p7)	br.spnt.many fsys_fallback_syscall	// got pending kernel work...
+(p8)	br.spnt.few .fail_efault		// fail with EFAULT
+	;;
+
+	cmp.eq p6,p7=r0,r33			// set == NULL?
+	add r31=IA64_SIGHAND_SIGLOCK_OFFSET,r31	// r31 <- current->sighand->siglock
+(p6)	br.dpnt.many .store_mask		// -> short-circuit to just reading the signal mask
+
+	/* Argh, we actually have to do some work and _update_ the signal mask: */
+
+EX(.fail_efault, probe.r.fault r33, 3)		// verify user has read-access to *set
+EX(.fail_efault, ld8 r14=[r33])			// r14 <- *set
+	mov r17=(1 << (SIGKILL - 1)) | (1 << (SIGSTOP - 1))
+	;;
+
+	rsm psr.i				// mask interrupt delivery
+	mov ar.ccv=0
+	andcm r14=r14,r17			// filter out SIGKILL & SIGSTOP
+
+#ifdef CONFIG_SMP
+	mov r17=1
+	;;
+	cmpxchg4.acq r18=[r31],r17,ar.ccv	// try to acquire the lock
+	mov r8=EINVAL			// default to EINVAL
+	;;
+	ld8 r3=[r2]			// re-read current->blocked now that we hold the lock
+	cmp4.ne p6,p0=r18,r0
+(p6)	br.cond.spnt.many .lock_contention
+	;;
+#else
+	ld8 r3=[r2]			// re-read current->blocked now that we hold the lock
+	mov r8=EINVAL			// default to EINVAL
+#endif
+	add r18=IA64_TASK_PENDING_OFFSET+IA64_SIGPENDING_SIGNAL_OFFSET,r16
+	add r19=IA64_TASK_SIGNAL_OFFSET,r16
+	cmp4.eq p6,p0=SIG_BLOCK,r32
+	;;
+	ld8 r19=[r19]			// r19 <- current->signal
+	cmp4.eq p7,p0=SIG_UNBLOCK,r32
+	cmp4.eq p8,p0=SIG_SETMASK,r32
+	;;
+	ld8 r18=[r18]			// r18 <- current->pending.signal
+	.pred.rel.mutex p6,p7,p8
+(p6)	or r3=r3,r14			// SIG_BLOCK
+(p7)	andcm r3=r3,r14			// SIG_UNBLOCK
+
+(p8)	mov r3=r14			// SIG_SETMASK
+(p6)	mov r8=0			// clear error code
+	// recalc_sigpending()
+	add r17=IA64_SIGNAL_GROUP_STOP_COUNT_OFFSET,r19
+
+	add r19=IA64_SIGNAL_SHARED_PENDING_OFFSET+IA64_SIGPENDING_SIGNAL_OFFSET,r19
+	;;
+	ld4 r17=[r17]		// r17 <- current->signal->group_stop_count
+(p7)	mov r8=0		// clear error code
+
+	ld8 r19=[r19]		// r19 <- current->signal->shared_pending
+	;;
+	cmp4.gt p6,p7=r17,r0	// p6/p7 <- (current->signal->group_stop_count > 0)?
+(p8)	mov r8=0		// clear error code
+
+	or r18=r18,r19		// r18 <- current->pending | current->signal->shared_pending
+	;;
+	// r18 <- (current->pending | current->signal->shared_pending) & ~current->blocked:
+	andcm r18=r18,r3
+	add r9=TI_FLAGS+IA64_TASK_SIZE,r16
+	;;
+
+(p7)	cmp.ne.or.andcm p6,p7=r18,r0		// p6/p7 <- signal pending
+	mov r19=0					// i must not leak kernel bits...
+(p6)	br.cond.dpnt.many .sig_pending
+	;;
+
+1:	ld4 r17=[r9]				// r17 <- current->thread_info->flags
+	;;
+	mov ar.ccv=r17
+	and r18=~_TIF_SIGPENDING,r17		// r18 <- r17 & ~(1 << TIF_SIGPENDING)
+	;;
+
+	st8 [r2]=r3				// update current->blocked with new mask
+	cmpxchg4.acq r14=[r9],r18,ar.ccv	// current->thread_info->flags <- r18
+	;;
+	cmp.ne p6,p0=r17,r14			// update failed?
+(p6)	br.cond.spnt.few 1b			// yes -> retry
+
+#ifdef CONFIG_SMP
+	st4.rel [r31]=r0			// release the lock
+#endif
+	ssm psr.i
+	cmp.ne p9,p0=r8,r0			// check for bad HOW value
+	;;
+
+	srlz.d					// ensure psr.i is set again
+	mov r18=0					// i must not leak kernel bits...
+(p9)	br.spnt.few .fail_einval		// bail out for bad HOW value
+
+.store_mask:
+EX(.fail_efault, (p15) probe.w.fault r34, 3)	// verify user has write-access to *oset
+EX(.fail_efault, (p15) st8 [r34]=r3)
+	mov r2=0					// i must not leak kernel bits...
+	mov r3=0					// i must not leak kernel bits...
+	mov r8=0				// return 0
+	mov r9=0					// i must not leak kernel bits...
+	mov r14=0					// i must not leak kernel bits...
+	mov r17=0					// i must not leak kernel bits...
+	mov r31=0					// i must not leak kernel bits...
+	FSYS_RETURN
+
+.sig_pending:
+#ifdef CONFIG_SMP
+	st4.rel [r31]=r0			// release the lock
+#endif
+	ssm psr.i
+	;;
+	srlz.d
+	br.sptk.many fsys_fallback_syscall	// with signal pending, do the heavy-weight syscall
+
+#ifdef CONFIG_SMP
+.lock_contention:
+	/* Rather than spinning here, fall back on doing a heavy-weight syscall.  */
+	ssm psr.i
+	;;
+	srlz.d
+	br.sptk.many fsys_fallback_syscall
+#endif
+END(fsys_rt_sigprocmask)
+
 ENTRY(fsys_fallback_syscall)
 	.prologue
 	.altrp b6
@@ -600,7 +768,7 @@ fsyscall_table:
 	data8 0				// sigaltstack
 	data8 0				// rt_sigaction
 	data8 0				// rt_sigpending
-	data8 0				// rt_sigprocmask
+	data8 fsys_rt_sigprocmask	// rt_sigprocmask
 	data8 0				// rt_sigqueueinfo	// 1180
 	data8 0				// rt_sigreturn
 	data8 0				// rt_sigsuspend

arch/ia64/kernel/gate.S

@@ -118,8 +118,7 @@ GLOBAL_ENTRY(__kernel_syscall_via_epc)
 
 	mov r10=-1
 	mov r8=ENOSYS
-	MCKINLEY_E9_WORKAROUND
-	br.ret.sptk.many b6
+	FSYS_RETURN
 END(__kernel_syscall_via_epc)
 
 #	define ARG0_OFF		(16 + IA64_SIGFRAME_ARG0_OFFSET)

arch/ia64/kernel/head.S

@@ -797,6 +797,25 @@ GLOBAL_ENTRY(ia64_switch_mode_virt)
 	br.ret.sptk.many rp
 END(ia64_switch_mode_virt)
 
+GLOBAL_ENTRY(ia64_delay_loop)
+	.prologue
+{	nop 0			// work around GAS unwind info generation bug...
+	.save ar.lc,r2
+	mov r2=ar.lc
+	.body
+	;;
+	mov ar.lc=r32
+}
+	;;
+	// force loop to be 32-byte aligned (GAS bug means we cannot use .align
+	// inside function body without corrupting unwind info).
+{	nop 0 }
+1:	br.cloop.sptk.few 1b
+	;;
+	mov ar.lc=r2
+	br.ret.sptk.many rp
+END(ia64_delay_loop)
+
 #ifdef CONFIG_IA64_BRL_EMU
 
 /*

arch/ia64/kernel/mca.c

@@ -81,8 +81,6 @@ u64				ia64_init_stack[KERNEL_STACK_SIZE/8] __attribute__((aligned(16)));
 u64				ia64_mca_sal_data_area[1356];
 u64				ia64_tlb_functional;
 u64				ia64_os_mca_recovery_successful;
-/* TODO: need to assign min-state structure to UC memory */
-u64				ia64_mca_min_state_save_info[MIN_STATE_AREA_SIZE] __attribute__((aligned(512)));
 static void			ia64_mca_wakeup_ipi_wait(void);
 static void			ia64_mca_wakeup(int cpu);
 static void			ia64_mca_wakeup_all(void);
@@ -465,26 +463,6 @@ ia64_mca_register_cpev (int cpev)
 
 #endif /* PLATFORM_MCA_HANDLERS */
 
-/*
- * routine to process and prepare to dump min_state_save
- * information for debugging purposes.
- */
-void
-ia64_process_min_state_save (pal_min_state_area_t *pmss)
-{
-	int i, max = MIN_STATE_AREA_SIZE;
-	u64 *tpmss_ptr = (u64 *)pmss;
-	u64 *return_min_state_ptr = ia64_mca_min_state_save_info;
-
-	for (i=0;i<max;i++) {
-
-		/* copy min-state register info for eventual return to PAL */
-		*return_min_state_ptr++ = *tpmss_ptr;
-
-		tpmss_ptr++;  /* skip to next entry */
-	}
-}
-
 /*
  * ia64_mca_cmc_vector_setup
  *
@@ -828,7 +806,7 @@ ia64_mca_wakeup_ipi_wait(void)
 			irr = ia64_getreg(_IA64_REG_CR_IRR3);
 			break;
 		}
-	} while (!(irr & (1 << irr_bit))) ;
+	} while (!(irr & (1UL << irr_bit))) ;
 }
 
 /*
@@ -961,9 +939,8 @@ ia64_return_to_sal_check(void)
 	/* Default = tell SAL to return to same context */
 	ia64_os_to_sal_handoff_state.imots_context = IA64_MCA_SAME_CONTEXT;
 
-	/* Register pointer to new min state values */
 	ia64_os_to_sal_handoff_state.imots_new_min_state =
-		ia64_mca_min_state_save_info;
+		(u64 *)ia64_sal_to_os_handoff_state.pal_min_state;
 }
 
 /*
@@ -2154,9 +2131,6 @@ ia64_log_proc_dev_err_info_print (sal_log_processor_info_t  *slpi,
 	if (slpi->valid.psi_static_struct) {
 		spsi = (sal_processor_static_info_t *)p_data;
 
-		/* copy interrupted context PAL min-state info */
-		ia64_process_min_state_save(&spsi->min_state_area);
-
 		/* Print branch register contents if valid */
 		if (spsi->valid.br)
 			ia64_log_processor_regs_print(spsi->br, 8, "Branch", "br",

arch/ia64/kernel/mca_asm.S

@@ -77,12 +77,11 @@
 (p6)	movl	r10=IA64_MCA_SAME_CONTEXT;		\
 (p6)	add     _tmp=0x18,_tmp;;			\
 (p6)	ld8	r9=[_tmp],0x10;				\
-(p6)	movl	r22=ia64_mca_min_state_save_info;;	\
+(p6)	mov	r22=r0;;				\
 (p7)	ld8	r8=[_tmp],0x08;;			\
 (p7)	ld8	r9=[_tmp],0x08;;			\
 (p7)	ld8     r10=[_tmp],0x08;;			\
-(p7)	ld8     r22=[_tmp],0x08;;			\
-	DATA_VA_TO_PA(r22)
+(p7)	ld8     r22=[_tmp],0x08;;
 	// now _tmp is pointing to SAL rtn save location
 
 
@@ -97,7 +96,6 @@
 	.global ia64_init_stack
 	.global ia64_mca_sal_data_area
 	.global ia64_tlb_functional
-	.global ia64_mca_min_state_save_info
 
 	.text
 	.align 16

arch/ia64/kernel/patch.c

@@ -130,9 +130,11 @@ ia64_patch_mckinley_e9 (unsigned long start, unsigned long end)
 
 	while (offp < (s32 *) end) {
 		wp = (u64 *) ia64_imva((char *) offp + *offp);
-		wp[0] = 0x0000000100000000;
+		wp[0] = 0x0000000100000000; /* nop.m 0; nop.i 0; nop.i 0 */
 		wp[1] = 0x0004000000000200;
-		ia64_fc(wp);
+		wp[2] = 0x0000000100000011; /* nop.m 0; nop.i 0; br.ret.sptk.many b6 */
+		wp[3] = 0x0084006880000200;
+		ia64_fc(wp); ia64_fc(wp + 2);
 		++offp;
 	}
 	ia64_sync_i();

arch/ia64/kernel/perfmon_itanium.h

@@ -81,6 +81,8 @@ pfm_ita_pmc_check(struct task_struct *task, pfm_context_t *ctx, unsigned int cnu
 	 */
 	if (cnum == 13 && ((*val & 0x1) == 0UL) && ctx->ctx_fl_using_dbreg == 0) {
 
+		DPRINT(("pmc[%d]=0x%lx has active pmc13.ta cleared, clearing ibr\n", cnum, *val));
+
 		/* don't mix debug with perfmon */
 		if (task && (task->thread.flags & IA64_THREAD_DBG_VALID) != 0) return -EINVAL;
 
@@ -98,6 +100,8 @@ pfm_ita_pmc_check(struct task_struct *task, pfm_context_t *ctx, unsigned int cnu
 	 */
 	if (cnum == 11 && ((*val >> 28)& 0x1) == 0 && ctx->ctx_fl_using_dbreg == 0) {
 
+		DPRINT(("pmc[%d]=0x%lx has active pmc11.pt cleared, clearing dbr\n", cnum, *val));
+
 		/* don't mix debug with perfmon */
 		if (task && (task->thread.flags & IA64_THREAD_DBG_VALID) != 0) return -EINVAL;
 

arch/ia64/kernel/perfmon_mckinley.h

@@ -109,10 +109,20 @@ pfm_mck_pmc_check(struct task_struct *task, pfm_context_t *ctx, unsigned int cnu
 	if (ctx == NULL) return -EINVAL;
 
 	/*
-	 * we must clear the debug registers if any pmc13.ena_dbrpX bit is enabled
-	 * before they are written (fl_using_dbreg==0) to avoid picking up stale information.
+	 * we must clear the debug registers if pmc13 has a value which enable
+	 * memory pipeline event constraints. In this case we need to clear the
+	 * the debug registers if they have not yet been accessed. This is required
+	 * to avoid picking stale state.
+	 * PMC13 is "active" if:
+	 * 	one of the pmc13.cfg_dbrpXX field is different from 0x3
+	 * AND
+	 * 	at the corresponding pmc13.ena_dbrpXX is set.
+	 *
+	 * For now, we just check on cfg_dbrXX != 0x3.
 	 */
-	if (cnum == 13 && (*val & (0xfUL << 45)) && ctx->ctx_fl_using_dbreg == 0) {
+	if (cnum == 13 && ((*val & 0x18181818UL) != 0x18181818UL) && ctx->ctx_fl_using_dbreg == 0) {
+
+		DPRINT(("pmc[%d]=0x%lx has active pmc13 settings, clearing dbr\n", cnum, *val));
 
 		/* don't mix debug with perfmon */
 		if (task && (task->thread.flags & IA64_THREAD_DBG_VALID) != 0) return -EINVAL;
@@ -128,7 +138,9 @@ pfm_mck_pmc_check(struct task_struct *task, pfm_context_t *ctx, unsigned int cnu
 	 * we must clear the (instruction) debug registers if any pmc14.ibrpX bit is enabled
 	 * before they are (fl_using_dbreg==0) to avoid picking up stale information.
 	 */
-	if (cnum == 14 && ((*val & 0x2222) != 0x2222) && ctx->ctx_fl_using_dbreg == 0) {
+	if (cnum == 14 && ((*val & 0x2222UL) != 0x2222UL) && ctx->ctx_fl_using_dbreg == 0) {
+
+		DPRINT(("pmc[%d]=0x%lx has active pmc14 settings, clearing ibr\n", cnum, *val));
 
 		/* don't mix debug with perfmon */
 		if (task && (task->thread.flags & IA64_THREAD_DBG_VALID) != 0) return -EINVAL;
@@ -170,7 +182,7 @@ pfm_mck_pmc_check(struct task_struct *task, pfm_context_t *ctx, unsigned int cnu
 		   && ((((val14>>1) & 0x3) == 0x2 || ((val14>>1) & 0x3) == 0x0)
 		       ||(((val14>>4) & 0x3) == 0x2 || ((val14>>4) & 0x3) == 0x0));
 
-		if (ret) printk("perfmon: failure check_case1\n");
+		if (ret) DPRINT((KERN_DEBUG "perfmon: failure check_case1\n"));
 	}
 
 	return ret ? -EINVAL : 0;

arch/ia64/kernel/setup.c

@@ -30,6 +30,8 @@
 #include <linux/string.h>
 #include <linux/threads.h>
 #include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
 #include <linux/efi.h>
 #include <linux/initrd.h>
 
@@ -43,6 +45,7 @@
 #include <asm/processor.h>
 #include <asm/sal.h>
 #include <asm/sections.h>
+#include <asm/serial.h>
 #include <asm/smp.h>
 #include <asm/system.h>
 #include <asm/unistd.h>
@@ -221,6 +224,25 @@ find_initrd (void)
 #endif
 }
 
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static void __init
+setup_serial_legacy (void)
+{
+	struct uart_port port;
+	unsigned int i, iobase[] = {0x3f8, 0x2f8};
+
+	printk(KERN_INFO "Registering legacy COM ports for serial console\n");
+	memset(&port, 0, sizeof(port));
+	port.iotype = SERIAL_IO_PORT;
+	port.uartclk = BASE_BAUD * 16;
+	for (i = 0; i < ARRAY_SIZE(iobase); i++) {
+		port.line = i;
+		port.iobase = iobase[i];
+		early_serial_setup(&port);
+	}
+}
+#endif
+
 void __init
 setup_arch (char **cmdline_p)
 {
@@ -294,11 +316,22 @@ setup_arch (char **cmdline_p)
 #ifdef CONFIG_SERIAL_8250_HCDP
 	if (efi.hcdp) {
 		void setup_serial_hcdp(void *);
-
-		/* Setup the serial ports described by HCDP */
 		setup_serial_hcdp(efi.hcdp);
 	}
 #endif
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	/*
+	 * Without HCDP, we won't discover any serial ports until the serial driver looks
+	 * in the ACPI namespace.  If ACPI claims there are some legacy devices, register
+	 * the legacy COM ports so serial console works earlier.  This is slightly dangerous
+	 * because we don't *really* know whether there's anything there, but we hope that
+	 * all new boxes will implement HCDP.
+	 */
+	extern unsigned char acpi_legacy_devices;
+	if (!efi.hcdp && acpi_legacy_devices)
+		setup_serial_legacy();
+#endif
+
 #ifdef CONFIG_VT
 # if defined(CONFIG_DUMMY_CONSOLE)
 	conswitchp = &dummy_con;

arch/ia64/kernel/time.c

@@ -65,8 +65,12 @@ itc_update (long delta_nsec)
 }
 
 /*
- * Return the number of nano-seconds that elapsed since the last update to jiffy.  The
- * xtime_lock must be at least read-locked when calling this routine.
+ * Return the number of nano-seconds that elapsed since the last
+ * update to jiffy.  It is quite possible that the timer interrupt
+ * will interrupt this and result in a race for any of jiffies,
+ * wall_jiffies or itm_next.  Thus, the xtime_lock must be at least
+ * read synchronised when calling this routine (see do_gettimeofday()
+ * below for an example).
  */
 unsigned long
 itc_get_offset (void)
@@ -77,11 +81,6 @@ itc_get_offset (void)
 	last_tick = (cpu_data(TIME_KEEPER_ID)->itm_next
 		     - (lost + 1)*cpu_data(TIME_KEEPER_ID)->itm_delta);
 
-	if (unlikely((long) (now - last_tick) < 0)) {
-		printk(KERN_ERR "CPU %d: now < last_tick (now=0x%lx,last_tick=0x%lx)!\n",
-		       smp_processor_id(), now, last_tick);
-		return last_nsec_offset;
-	}
 	elapsed_cycles = now - last_tick;
 	return (elapsed_cycles*local_cpu_data->nsec_per_cyc) >> IA64_NSEC_PER_CYC_SHIFT;
 }

arch/ia64/sn/kernel/sn2/io.c

@@ -11,6 +11,8 @@
 
 #include <asm/sn/sn2/io.h>
 
+#ifdef CONFIG_IA64_GENERIC
+
 #undef __sn_inb
 #undef __sn_inw
 #undef __sn_inl
@@ -81,3 +83,5 @@ __sn_readq (void *addr)
 {
 	return ___sn_readq (addr);
 }
+
+#endif

include/asm-ia64/asmmacro.h

@@ -68,20 +68,25 @@
  * we'll patch out the work-around bundles with NOPs, so their impact is minimal.
  */
 #define DO_MCKINLEY_E9_WORKAROUND
+
 #ifdef DO_MCKINLEY_E9_WORKAROUND
 	.section ".data.patch.mckinley_e9", "a"
 	.previous
 /* workaround for Itanium 2 Errata 9: */
-# define MCKINLEY_E9_WORKAROUND			\
-	.xdata4 ".data.patch.mckinley_e9", 1f-.;\
+# define FSYS_RETURN					\
+	.xdata4 ".data.patch.mckinley_e9", 1f-.;	\
 1:{ .mib;						\
 	nop.m 0;					\
-	nop.i 0;				\
-	br.call.sptk.many b7=1f;;		\
+	mov r16=ar.pfs;					\
+	br.call.sptk.many b7=2f;;			\
   };							\
-1:
+2:{ .mib;						\
+	nop.m 0;					\
+	mov ar.pfs=r16;					\
+	br.ret.sptk.many b6;;				\
+  }
 #else
-# define MCKINLEY_E9_WORKAROUND
+# define FSYS_RETURN	br.ret.sptk.many b6
 #endif
 
 #endif /* _ASM_IA64_ASMMACRO_H */

include/asm-ia64/delay.h

@@ -67,14 +67,15 @@ ia64_get_itc (void)
 	return result;
 }
 
+extern void ia64_delay_loop (unsigned long loops);
+
 static __inline__ void
 __delay (unsigned long loops)
 {
-	if (loops < 1)
+	if (unlikely(loops < 1))
 		return;
 
-	while (loops--)
-		ia64_nop(0);
+	ia64_delay_loop (loops - 1);
 }
 
 static __inline__ void

include/asm-ia64/machvec_sn2.h

@@ -99,4 +99,6 @@ extern ia64_mv_dma_supported		sn_dma_supported;
 #define platform_dma_sync_sg		sn_dma_sync_sg
 #define platform_dma_supported		sn_dma_supported
 
+#include <asm/sn/sn2/io.h>
+
 #endif /* _ASM_IA64_MACHVEC_SN2_H */

include/asm-ia64/mca.h

@@ -108,8 +108,6 @@ enum {
 	IA64_MCA_NEW_CONTEXT	=	-1	/* SAL to return to new context */
 };
 
-#define MIN_STATE_AREA_SIZE     57
-
 typedef struct ia64_mca_os_to_sal_state_s {
 	u64		imots_os_status;	/*   OS status to SAL as to what happened
 						 *   with the MCA handling.

include/asm-ia64/mca_asm.h

@@ -110,10 +110,9 @@
 	;;										\
 	dep	temp1 = -1, temp1, PSR_MC, 1;						\
 	;;										\
-	movl	temp2 = start_addr;							\
 	mov	cr.ipsr = temp1;							\
 	;;										\
-	INST_VA_TO_PA(temp2);								\
+	LOAD_PHYSICAL(p0, temp2, start_addr);						\
 	;;										\
 	mov	cr.iip = temp2;								\
 	mov	cr.ifs = r0;								\

include/asm-ia64/pal.h

@@ -405,10 +405,11 @@ typedef struct pal_process_state_info_s {
 						 * generated.
 						 * (Trap Lost )
 						 */
-			op		: 3,	/* Operation that
-						 * caused the machine
-						 * check
+			mi		: 1,	/* More information available
+						 * call PAL_MC_ERROR_INFO
 						 */
+			pi		: 1,	/* Precise instruction pointer */
+			pm		: 1,	/* Precise min-state save area */
 
 			dy		: 1,	/* Processor dynamic
 						 * state valid
@@ -450,11 +451,12 @@ typedef struct pal_process_state_info_s {
 						 * by the processor
 						 */
 
-			reserved2	: 12,
+			reserved2	: 11,
 			cc		: 1,	/* Cache check */
 			tc		: 1,	/* TLB check */
 			bc		: 1,	/* Bus check */
-			uc		: 1;	/* Unknown check */
+			rc		: 1,	/* Register file check */
+			uc		: 1;	/* Uarch check */
 
 } pal_processor_state_info_t;
 

include/asm-ia64/perfmon.h

@@ -38,7 +38,6 @@
  */
 #define PFM_FL_NOTIFY_BLOCK    	 0x01	/* block task on user level notifications */
 #define PFM_FL_SYSTEM_WIDE	 0x02	/* create a system wide context */
-#define PFM_FL_UNSECURE		 0x04   /* allow unsecure monitoring for non self-monitoring task */
 #define PFM_FL_OVFL_NO_MSG	 0x80   /* do not post overflow/end messages for notification */
 
 /*
@@ -162,8 +161,6 @@ typedef union {
  */
 #define PFM_VERSION_MAJ		 2U
 #define PFM_VERSION_MIN		 0U
-#define PFM_SMPL_HDR_VERSION_MAJ 2U
-#define PFM_SMPL_HDR_VERSION_MIN 0U
 #define PFM_VERSION		 (((PFM_VERSION_MAJ&0xffff)<<16)|(PFM_VERSION_MIN & 0xffff))
 #define PFM_VERSION_MAJOR(x)	 (((x)>>16) & 0xffff)
 #define PFM_VERSION_MINOR(x)	 ((x) & 0xffff)
@@ -194,9 +191,8 @@ extern void pfm_handle_work(void);
 /*
  * Reset PMD register flags
  */
-#define PFM_PMD_NO_RESET	0
+#define PFM_PMD_SHORT_RESET	0
 #define PFM_PMD_LONG_RESET	1
-#define PFM_PMD_SHORT_RESET	2
 
 typedef union {
 	unsigned int val;
@@ -223,7 +219,7 @@ typedef struct {
 } pfm_ovfl_arg_t;
 
 
-typedef struct _pfm_buffer_fmt_t {
+typedef struct {
 	char		*fmt_name;
 	pfm_uuid_t	fmt_uuid;
 	size_t		fmt_arg_size;
@@ -237,8 +233,7 @@ typedef struct _pfm_buffer_fmt_t {
 	int		(*fmt_restart_active)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs);
 	int		(*fmt_exit)(struct task_struct *task, void *buf, struct pt_regs *regs);
 
-	struct _pfm_buffer_fmt_t *fmt_next;
-	struct _pfm_buffer_fmt_t *fmt_prev;
+	struct list_head fmt_list;
 } pfm_buffer_fmt_t;
 
 extern int pfm_register_buffer_fmt(pfm_buffer_fmt_t *fmt);

include/asm-ia64/posix_types.h

@@ -10,7 +10,7 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>
  */
 
-typedef unsigned int	__kernel_ino_t;
+typedef unsigned long	__kernel_ino_t;
 typedef unsigned int	__kernel_mode_t;
 typedef unsigned int	__kernel_nlink_t;
 typedef long		__kernel_off_t;

include/asm-ia64/serial.h

@@ -4,8 +4,6 @@
  * Derived from the i386 version.
  */
 
-#include <linux/config.h>
-
 /*
  * This assumes you have a 1.8432 MHz clock for your UART.
  *
@@ -15,107 +13,7 @@
  */
 #define BASE_BAUD ( 1843200 / 16 )
 
-#define CONFIG_SERIAL_DETECT_IRQ	/* on IA-64, we always want to autodetect irqs */
-
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
-#endif
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
-#define ACCENT_FLAGS 0
-#define BOCA_FLAGS 0
-#define HUB6_FLAGS 0
-#define RS_TABLE_SIZE	64
-#else
-#define RS_TABLE_SIZE
-#endif
-
 /*
- * The following define the access methods for the HUB6 card. All
- * access is through two ports for all 24 possible chips. The card is
- * selected through the high 2 bits, the port on that card with the
- * "middle" 3 bits, and the register on that port with the bottom
- * 3 bits.
- *
- * While the access port and interrupt is configurable, the default
- * port locations are 0x302 for the port control register, and 0x303
- * for the data read/write register. Normally, the interrupt is at irq3
- * but can be anything from 3 to 7 inclusive. Note that using 3 will
- * require disabling com2.
- */
-
-#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
-
-#define STD_SERIAL_PORT_DEFNS			\
-	/* UART CLK   PORT IRQ     FLAGS        */			\
-	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
-	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
-	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
-	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define EXTRA_SERIAL_PORT_DEFNS			\
-	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, 	/* ttyS4 */	\
-	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
-	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
-	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
-	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
-	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
-	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
-	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
-	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
-	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS14 (spare) */		\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS15 (spare) */		\
-	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
-	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
-	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
-	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
-	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
-	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
-	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
-	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
-	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
-	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
-	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
-	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
-	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
-	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
-	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
-	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
-#else
-#define EXTRA_SERIAL_PORT_DEFNS
-#endif
-
-/* You can have up to four HUB6's in the system, but I've only
- * included two cards here for a total of twelve ports.
+ * All legacy serial ports should be enumerated via ACPI namespace, so
+ * we need not list them here.
  */
-#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
-#define HUB6_SERIAL_PORT_DFNS		\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) },  /* ttyS32 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) },  /* ttyS33 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) },  /* ttyS34 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) },  /* ttyS35 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) },  /* ttyS36 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) },  /* ttyS37 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) },  /* ttyS38 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) },  /* ttyS39 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) },  /* ttyS40 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) },  /* ttyS41 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) },  /* ttyS42 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) },  /* ttyS43 */
-#else
-#define HUB6_SERIAL_PORT_DFNS
-#endif
-
-#define SERIAL_PORT_DFNS		\
-	STD_SERIAL_PORT_DEFNS		\
-	EXTRA_SERIAL_PORT_DEFNS		\
-	HUB6_SERIAL_PORT_DFNS
-