Commit eb24bd3c authored by Johan Hovold's avatar Johan Hovold Committed by Bjorn Andersson

arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader

Enable the multiport USB controller to which the fingerprint reader in
the X13s power button is connected.
Signed-off-by: default avatarJohan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240501065641.965-1-johan+linaro@kernel.orgSigned-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent 3170a2c9
......@@ -416,6 +416,13 @@ vreg_s12b: smps12 {
regulator-always-on;
};
vreg_l1b: ldo1 {
regulator-name = "vreg_l1b";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3b: ldo3 {
regulator-name = "vreg_l3b";
regulator-min-microvolt = <1200000>;
......@@ -466,6 +473,13 @@ vreg_l1c: ldo1 {
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8c: ldo8 {
regulator-name = "vreg_l8c";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12c: ldo12 {
regulator-name = "vreg_l12c";
regulator-min-microvolt = <1800000>;
......@@ -499,6 +513,13 @@ regulators-2 {
vdd-l6-l9-l10-supply = <&vreg_s12b>;
vdd-l8-supply = <&vreg_s12b>;
vreg_l2d: ldo2 {
regulator-name = "vreg_l2d";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3d: ldo3 {
regulator-name = "vreg_l3d";
regulator-min-microvolt = <1200000>;
......@@ -527,12 +548,26 @@ vreg_l7d: ldo7 {
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8d: ldo8 {
regulator-name = "vreg_l8d";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9d: ldo9 {
regulator-name = "vreg_l9d";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10d: ldo10 {
regulator-name = "vreg_l10d";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
......@@ -1162,6 +1197,56 @@ &usb_1_role_switch {
remote-endpoint = <&pmic_glink_con1_hs>;
};
&usb_2 {
status = "okay";
};
&usb_2_hsphy0 {
vdda-pll-supply = <&vreg_l1b>;
vdda18-supply = <&vreg_l1c>;
vdda33-supply = <&vreg_l7d>;
status = "okay";
};
&usb_2_hsphy1 {
vdda-pll-supply = <&vreg_l8d>;
vdda18-supply = <&vreg_l1c>;
vdda33-supply = <&vreg_l7d>;
status = "okay";
};
&usb_2_hsphy2 {
vdda-pll-supply = <&vreg_l10d>;
vdda18-supply = <&vreg_l8c>;
vdda33-supply = <&vreg_l2d>;
status = "okay";
};
&usb_2_hsphy3 {
vdda-pll-supply = <&vreg_l10d>;
vdda18-supply = <&vreg_l8c>;
vdda33-supply = <&vreg_l2d>;
status = "okay";
};
&usb_2_qmpphy0 {
vdda-phy-supply = <&vreg_l1b>;
vdda-pll-supply = <&vreg_l4d>;
status = "okay";
};
&usb_2_qmpphy1 {
vdda-phy-supply = <&vreg_l8d>;
vdda-pll-supply = <&vreg_l4d>;
status = "okay";
};
&vamacro {
pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
pinctrl-names = "default";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment