Commit ebaefdb7 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] em28xx: use the proper prefix for board names

All boards use EM28xxx_BOARD, to identify that the macro
refers to a card entry. So:

EM2874_LEADERSHIP_ISDBT -> EM2874_BOARD_LEADERSHIP_ISDBT
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 460312ec
...@@ -1259,7 +1259,7 @@ struct em28xx_board em28xx_boards[] = { ...@@ -1259,7 +1259,7 @@ struct em28xx_board em28xx_boards[] = {
} }, } },
}, },
[EM2874_LEADERSHIP_ISDBT] = { [EM2874_BOARD_LEADERSHIP_ISDBT] = {
.i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ, EM28XX_I2C_FREQ_100_KHZ,
...@@ -1937,7 +1937,7 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = { ...@@ -1937,7 +1937,7 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = {
{0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
{0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
{0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
{0x6b800080, EM2874_LEADERSHIP_ISDBT, TUNER_ABSENT}, {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
}; };
/* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */ /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
......
...@@ -546,7 +546,7 @@ static int dvb_init(struct em28xx *dev) ...@@ -546,7 +546,7 @@ static int dvb_init(struct em28xx *dev)
em28xx_set_mode(dev, EM28XX_DIGITAL_MODE); em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
/* init frontend */ /* init frontend */
switch (dev->model) { switch (dev->model) {
case EM2874_LEADERSHIP_ISDBT: case EM2874_BOARD_LEADERSHIP_ISDBT:
dvb->fe[0] = dvb_attach(s921_attach, dvb->fe[0] = dvb_attach(s921_attach,
&sharp_isdbt, &dev->i2c_adap); &sharp_isdbt, &dev->i2c_adap);
......
...@@ -117,7 +117,7 @@ ...@@ -117,7 +117,7 @@
#define EM2800_BOARD_VC211A 74 #define EM2800_BOARD_VC211A 74
#define EM2882_BOARD_DIKOM_DK300 75 #define EM2882_BOARD_DIKOM_DK300 75
#define EM2870_BOARD_KWORLD_A340 76 #define EM2870_BOARD_KWORLD_A340 76
#define EM2874_LEADERSHIP_ISDBT 77 #define EM2874_BOARD_LEADERSHIP_ISDBT 77
#define EM28174_BOARD_PCTV_290E 78 #define EM28174_BOARD_PCTV_290E 78
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment