Commit ec43b816 authored by Ian Molton's avatar Ian Molton Committed by Samuel Ortiz

mfd: driver for the TMIO NAND controller

This patch adds support for the NAND controller commonly found in
TMIO based MFDs.
Signed-off-by: default avatarIan Molton <spyro@f2s.com>
Acked-By: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@openedhand.com>
parent 8a4fbe01
...@@ -351,6 +351,13 @@ config MTD_NAND_PASEMI ...@@ -351,6 +351,13 @@ config MTD_NAND_PASEMI
Enables support for NAND Flash interface on PA Semi PWRficient Enables support for NAND Flash interface on PA Semi PWRficient
based boards based boards
config MTD_NAND_TMIO
tristate "NAND Flash device on Toshiba Mobile IO Controller"
depends on MTD_NAND && MFD_CORE
help
Support for NAND flash connected to a Toshiba Mobile IO
Controller in some PDAs, including the Sharp SL6000x.
config MTD_NAND_NANDSIM config MTD_NAND_NANDSIM
tristate "Support for NAND Flash Simulator" tristate "Support for NAND Flash Simulator"
depends on MTD_PARTITIONS depends on MTD_PARTITIONS
......
...@@ -27,6 +27,7 @@ obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o ...@@ -27,6 +27,7 @@ obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o
obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
obj-$(CONFIG_MTD_ALAUDA) += alauda.o obj-$(CONFIG_MTD_ALAUDA) += alauda.o
obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment