Commit ec9ac747 authored by Anoop P A's avatar Anoop P A Committed by Ralf Baechle

MIPS: MSP71xx: Platform support for On-chip MSP ethernet devices.

Some of MSP family SoC's come with legacy 100Mbps mspeth while some comes
with newer Gigabit TSMAC.Following patch adds platform support for both
types of MAC's.
If TSMAC is not selected assume platform having legacy mspeth.  Add
gpio_macros as well which is required for resetting the PHY.

[Ralf: Killed all typedefs.]
Signed-off-by: default avatarAnoop P A <anoop.pa@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2048/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 5027070b
/*
*
* Macros for external SMP-safe access to the PMC MSP71xx reference
* board GPIO pins
*
* Copyright 2010 PMC-Sierra, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __MSP_GPIO_MACROS_H__
#define __MSP_GPIO_MACROS_H__
#include <msp_regops.h>
#include <msp_regs.h>
#ifdef CONFIG_PMC_MSP7120_GW
#define MSP_NUM_GPIOS 20
#else
#define MSP_NUM_GPIOS 28
#endif
/* -- GPIO Enumerations -- */
enum msp_gpio_data {
MSP_GPIO_LO = 0,
MSP_GPIO_HI = 1,
MSP_GPIO_NONE, /* Special - Means pin is out of range */
MSP_GPIO_TOGGLE, /* Special - Sets pin to opposite */
};
enum msp_gpio_mode {
MSP_GPIO_INPUT = 0x0,
/* MSP_GPIO_ INTERRUPT = 0x1, Not supported yet */
MSP_GPIO_UART_INPUT = 0x2, /* Only GPIO 4 or 5 */
MSP_GPIO_OUTPUT = 0x8,
MSP_GPIO_UART_OUTPUT = 0x9, /* Only GPIO 2 or 3 */
MSP_GPIO_PERIF_TIMERA = 0x9, /* Only GPIO 0 or 1 */
MSP_GPIO_PERIF_TIMERB = 0xa, /* Only GPIO 0 or 1 */
MSP_GPIO_UNKNOWN = 0xb, /* No such GPIO or mode */
};
/* -- Static Tables -- */
/* Maps pins to data register */
static volatile u32 * const MSP_GPIO_DATA_REGISTER[] = {
/* GPIO 0 and 1 on the first register */
GPIO_DATA1_REG, GPIO_DATA1_REG,
/* GPIO 2, 3, 4, and 5 on the second register */
GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG,
/* GPIO 6, 7, 8, and 9 on the third register */
GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG,
/* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG,
GPIO_DATA4_REG, GPIO_DATA4_REG,
/* GPIO 16 - 23 on the first strange EXTENDED register */
EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
/* GPIO 24 - 27 on the second strange EXTENDED register */
EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG,
EXTENDED_GPIO2_REG,
};
/* Maps pins to mode register */
static volatile u32 * const MSP_GPIO_MODE_REGISTER[] = {
/* GPIO 0 and 1 on the first register */
GPIO_CFG1_REG, GPIO_CFG1_REG,
/* GPIO 2, 3, 4, and 5 on the second register */
GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG,
/* GPIO 6, 7, 8, and 9 on the third register */
GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG,
/* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG,
GPIO_CFG4_REG, GPIO_CFG4_REG,
/* GPIO 16 - 23 on the first strange EXTENDED register */
EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
/* GPIO 24 - 27 on the second strange EXTENDED register */
EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG,
EXTENDED_GPIO2_REG,
};
/* Maps 'basic' pins to relative offset from 0 per register */
static int MSP_GPIO_OFFSET[] = {
/* GPIO 0 and 1 on the first register */
0, 0,
/* GPIO 2, 3, 4, and 5 on the second register */
2, 2, 2, 2,
/* GPIO 6, 7, 8, and 9 on the third register */
6, 6, 6, 6,
/* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
10, 10, 10, 10, 10, 10,
};
/* Maps MODE to allowed pin mask */
static unsigned int MSP_GPIO_MODE_ALLOWED[] = {
0xffffffff, /* Mode 0 - INPUT */
0x00000, /* Mode 1 - INTERRUPT */
0x00030, /* Mode 2 - UART_INPUT (GPIO 4, 5)*/
0, 0, 0, 0, 0, /* Modes 3, 4, 5, 6, and 7 are reserved */
0xffffffff, /* Mode 8 - OUTPUT */
0x0000f, /* Mode 9 - UART_OUTPUT/
PERF_TIMERA (GPIO 0, 1, 2, 3) */
0x00003, /* Mode a - PERF_TIMERB (GPIO 0, 1) */
0x00000, /* Mode b - Not really a mode! */
};
/* -- Bit masks -- */
/* This gives you the 'register relative offset gpio' number */
#define OFFSET_GPIO_NUMBER(gpio) (gpio - MSP_GPIO_OFFSET[gpio])
/* These take the 'register relative offset gpio' number */
#define BASIC_DATA_REG_MASK(ogpio) (1 << ogpio)
#define BASIC_MODE_REG_VALUE(mode, ogpio) \
(mode << BASIC_MODE_REG_SHIFT(ogpio))
#define BASIC_MODE_REG_MASK(ogpio) \
BASIC_MODE_REG_VALUE(0xf, ogpio)
#define BASIC_MODE_REG_SHIFT(ogpio) (ogpio * 4)
#define BASIC_MODE_REG_FROM_REG(data, ogpio) \
((data & BASIC_MODE_REG_MASK(ogpio)) >> BASIC_MODE_REG_SHIFT(ogpio))
/* These take the actual GPIO number (0 through 15) */
#define BASIC_DATA_MASK(gpio) \
BASIC_DATA_REG_MASK(OFFSET_GPIO_NUMBER(gpio))
#define BASIC_MODE_MASK(gpio) \
BASIC_MODE_REG_MASK(OFFSET_GPIO_NUMBER(gpio))
#define BASIC_MODE(mode, gpio) \
BASIC_MODE_REG_VALUE(mode, OFFSET_GPIO_NUMBER(gpio))
#define BASIC_MODE_SHIFT(gpio) \
BASIC_MODE_REG_SHIFT(OFFSET_GPIO_NUMBER(gpio))
#define BASIC_MODE_FROM_REG(data, gpio) \
BASIC_MODE_REG_FROM_REG(data, OFFSET_GPIO_NUMBER(gpio))
/*
* Each extended GPIO register is 32 bits long and is responsible for up to
* eight GPIOs. The least significant 16 bits contain the set and clear bit
* pair for each of the GPIOs. The most significant 16 bits contain the
* disable and enable bit pair for each of the GPIOs. For example, the
* extended GPIO reg for GPIOs 16-23 is as follows:
*
* 31: GPIO23_DISABLE
* ...
* 19: GPIO17_DISABLE
* 18: GPIO17_ENABLE
* 17: GPIO16_DISABLE
* 16: GPIO16_ENABLE
* ...
* 3: GPIO17_SET
* 2: GPIO17_CLEAR
* 1: GPIO16_SET
* 0: GPIO16_CLEAR
*/
/* This gives the 'register relative offset gpio' number */
#define EXTENDED_OFFSET_GPIO(gpio) (gpio < 24 ? gpio - 16 : gpio - 24)
/* These take the 'register relative offset gpio' number */
#define EXTENDED_REG_DISABLE(ogpio) (0x2 << ((ogpio * 2) + 16))
#define EXTENDED_REG_ENABLE(ogpio) (0x1 << ((ogpio * 2) + 16))
#define EXTENDED_REG_SET(ogpio) (0x2 << (ogpio * 2))
#define EXTENDED_REG_CLR(ogpio) (0x1 << (ogpio * 2))
/* These take the actual GPIO number (16 through 27) */
#define EXTENDED_DISABLE(gpio) \
EXTENDED_REG_DISABLE(EXTENDED_OFFSET_GPIO(gpio))
#define EXTENDED_ENABLE(gpio) \
EXTENDED_REG_ENABLE(EXTENDED_OFFSET_GPIO(gpio))
#define EXTENDED_SET(gpio) \
EXTENDED_REG_SET(EXTENDED_OFFSET_GPIO(gpio))
#define EXTENDED_CLR(gpio) \
EXTENDED_REG_CLR(EXTENDED_OFFSET_GPIO(gpio))
#define EXTENDED_FULL_MASK (0xffffffff)
/* -- API inline-functions -- */
/*
* Gets the current value of the specified pin
*/
static inline enum msp_gpio_data msp_gpio_pin_get(unsigned int gpio)
{
u32 pinhi_mask = 0, pinhi_mask2 = 0;
if (gpio >= MSP_NUM_GPIOS)
return MSP_GPIO_NONE;
if (gpio < 16) {
pinhi_mask = BASIC_DATA_MASK(gpio);
} else {
/*
* Two cases are possible with the EXTENDED register:
* - In output mode (ENABLED flag set), check the CLR bit
* - In input mode (ENABLED flag not set), check the SET bit
*/
pinhi_mask = EXTENDED_ENABLE(gpio) | EXTENDED_CLR(gpio);
pinhi_mask2 = EXTENDED_SET(gpio);
}
if (((*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask) == pinhi_mask) ||
(*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask2))
return MSP_GPIO_HI;
else
return MSP_GPIO_LO;
}
/* Sets the specified pin to the specified value */
static inline void msp_gpio_pin_set(enum msp_gpio_data data, unsigned int gpio)
{
if (gpio >= MSP_NUM_GPIOS)
return;
if (gpio < 16) {
if (data == MSP_GPIO_TOGGLE)
toggle_reg32(MSP_GPIO_DATA_REGISTER[gpio],
BASIC_DATA_MASK(gpio));
else if (data == MSP_GPIO_HI)
set_reg32(MSP_GPIO_DATA_REGISTER[gpio],
BASIC_DATA_MASK(gpio));
else
clear_reg32(MSP_GPIO_DATA_REGISTER[gpio],
BASIC_DATA_MASK(gpio));
} else {
if (data == MSP_GPIO_TOGGLE) {
/* Special ugly case:
* We have to read the CLR bit.
* If set, we write the CLR bit.
* If not, we write the SET bit.
*/
u32 tmpdata;
custom_read_reg32(MSP_GPIO_DATA_REGISTER[gpio],
tmpdata);
if (tmpdata & EXTENDED_CLR(gpio))
tmpdata = EXTENDED_CLR(gpio);
else
tmpdata = EXTENDED_SET(gpio);
custom_write_reg32(MSP_GPIO_DATA_REGISTER[gpio],
tmpdata);
} else {
u32 newdata;
if (data == MSP_GPIO_HI)
newdata = EXTENDED_SET(gpio);
else
newdata = EXTENDED_CLR(gpio);
set_value_reg32(MSP_GPIO_DATA_REGISTER[gpio],
EXTENDED_FULL_MASK, newdata);
}
}
}
/* Sets the specified pin to the specified value */
static inline void msp_gpio_pin_hi(unsigned int gpio)
{
msp_gpio_pin_set(MSP_GPIO_HI, gpio);
}
/* Sets the specified pin to the specified value */
static inline void msp_gpio_pin_lo(unsigned int gpio)
{
msp_gpio_pin_set(MSP_GPIO_LO, gpio);
}
/* Sets the specified pin to the opposite value */
static inline void msp_gpio_pin_toggle(unsigned int gpio)
{
msp_gpio_pin_set(MSP_GPIO_TOGGLE, gpio);
}
/* Gets the mode of the specified pin */
static inline enum msp_gpio_mode msp_gpio_pin_get_mode(unsigned int gpio)
{
enum msp_gpio_mode retval = MSP_GPIO_UNKNOWN;
uint32_t data;
if (gpio >= MSP_NUM_GPIOS)
return retval;
data = *MSP_GPIO_MODE_REGISTER[gpio];
if (gpio < 16) {
retval = BASIC_MODE_FROM_REG(data, gpio);
} else {
/* Extended pins can only be either INPUT or OUTPUT */
if (data & EXTENDED_ENABLE(gpio))
retval = MSP_GPIO_OUTPUT;
else
retval = MSP_GPIO_INPUT;
}
return retval;
}
/*
* Sets the specified mode on the requested pin
* Returns 0 on success, or -1 if that mode is not allowed on this pin
*/
static inline int msp_gpio_pin_mode(enum msp_gpio_mode mode, unsigned int gpio)
{
u32 modemask, newmode;
if ((1 << gpio) & ~MSP_GPIO_MODE_ALLOWED[mode])
return -1;
if (gpio >= MSP_NUM_GPIOS)
return -1;
if (gpio < 16) {
modemask = BASIC_MODE_MASK(gpio);
newmode = BASIC_MODE(mode, gpio);
} else {
modemask = EXTENDED_FULL_MASK;
if (mode == MSP_GPIO_INPUT)
newmode = EXTENDED_DISABLE(gpio);
else
newmode = EXTENDED_ENABLE(gpio);
}
/* Do the set atomically */
set_value_reg32(MSP_GPIO_MODE_REGISTER[gpio], modemask, newmode);
return 0;
}
#endif /* __MSP_GPIO_MACROS_H__ */
...@@ -24,6 +24,7 @@ config PMC_MSP7120_GW ...@@ -24,6 +24,7 @@ config PMC_MSP7120_GW
select IRQ_MSP_CIC select IRQ_MSP_CIC
select HW_HAS_PCI select HW_HAS_PCI
select MSP_HAS_USB select MSP_HAS_USB
select MSP_ETH
config PMC_MSP7120_FPGA config PMC_MSP7120_FPGA
bool "PMC-Sierra MSP7120 FPGA" bool "PMC-Sierra MSP7120 FPGA"
...@@ -40,3 +41,12 @@ config HYPERTRANSPORT ...@@ -40,3 +41,12 @@ config HYPERTRANSPORT
config MSP_HAS_USB config MSP_HAS_USB
boolean boolean
depends on PMC_MSP depends on PMC_MSP
config MSP_ETH
boolean
select MSP_HAS_MAC
depends on PMC_MSP
config MSP_HAS_MAC
boolean
depends on PMC_MSP
...@@ -8,7 +8,7 @@ obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o ...@@ -8,7 +8,7 @@ obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o
obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o
obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o
obj-$(CONFIG_PCI) += msp_pci.o obj-$(CONFIG_PCI) += msp_pci.o
obj-$(CONFIG_MSPETH) += msp_eth.o obj-$(CONFIG_MSP_HAS_MAC) += msp_eth.o
obj-$(CONFIG_MSP_HAS_USB) += msp_usb.o obj-$(CONFIG_MSP_HAS_USB) += msp_usb.o
obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o
obj-$(CONFIG_MIPS_MT_SMTC) += msp_smtc.o obj-$(CONFIG_MIPS_MT_SMTC) += msp_smtc.o
/*
* The setup file for ethernet related hardware on PMC-Sierra MSP processors.
*
* Copyright 2010 PMC-Sierra, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <msp_regs.h>
#include <msp_int.h>
#include <msp_gpio_macros.h>
#define MSP_ETHERNET_GPIO0 14
#define MSP_ETHERNET_GPIO1 15
#define MSP_ETHERNET_GPIO2 16
#ifdef CONFIG_MSP_HAS_TSMAC
#define MSP_TSMAC_SIZE 0x10020
#define MSP_TSMAC_ID "pmc_tsmac"
static struct resource msp_tsmac0_resources[] = {
[0] = {
.start = MSP_MAC0_BASE,
.end = MSP_MAC0_BASE + MSP_TSMAC_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = MSP_INT_MAC0,
.end = MSP_INT_MAC0,
.flags = IORESOURCE_IRQ,
},
};
static struct resource msp_tsmac1_resources[] = {
[0] = {
.start = MSP_MAC1_BASE,
.end = MSP_MAC1_BASE + MSP_TSMAC_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = MSP_INT_MAC1,
.end = MSP_INT_MAC1,
.flags = IORESOURCE_IRQ,
},
};
static struct resource msp_tsmac2_resources[] = {
[0] = {
.start = MSP_MAC2_BASE,
.end = MSP_MAC2_BASE + MSP_TSMAC_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = MSP_INT_SAR,
.end = MSP_INT_SAR,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device tsmac_device[] = {
[0] = {
.name = MSP_TSMAC_ID,
.id = 0,
.num_resources = ARRAY_SIZE(msp_tsmac0_resources),
.resource = msp_tsmac0_resources,
},
[1] = {
.name = MSP_TSMAC_ID,
.id = 1,
.num_resources = ARRAY_SIZE(msp_tsmac1_resources),
.resource = msp_tsmac1_resources,
},
[2] = {
.name = MSP_TSMAC_ID,
.id = 2,
.num_resources = ARRAY_SIZE(msp_tsmac2_resources),
.resource = msp_tsmac2_resources,
},
};
#define msp_eth_devs tsmac_device
#else
/* If it is not TSMAC assume MSP_ETH (100Mbps) */
#define MSP_ETH_ID "pmc_mspeth"
#define MSP_ETH_SIZE 0xE0
static struct resource msp_eth0_resources[] = {
[0] = {
.start = MSP_MAC0_BASE,
.end = MSP_MAC0_BASE + MSP_ETH_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = MSP_INT_MAC0,
.end = MSP_INT_MAC0,
.flags = IORESOURCE_IRQ,
},
};
static struct resource msp_eth1_resources[] = {
[0] = {
.start = MSP_MAC1_BASE,
.end = MSP_MAC1_BASE + MSP_ETH_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = MSP_INT_MAC1,
.end = MSP_INT_MAC1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mspeth_device[] = {
[0] = {
.name = MSP_ETH_ID,
.id = 0,
.num_resources = ARRAY_SIZE(msp_eth0_resources),
.resource = msp_eth0_resources,
},
[1] = {
.name = MSP_ETH_ID,
.id = 1,
.num_resources = ARRAY_SIZE(msp_eth1_resources),
.resource = msp_eth1_resources,
},
};
#define msp_eth_devs mspeth_device
#endif
int __init msp_eth_setup(void)
{
int i, ret = 0;
/* Configure the GPIO and take the ethernet PHY out of reset */
msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO0);
msp_gpio_pin_hi(MSP_ETHERNET_GPIO0);
#ifdef CONFIG_MSP_HAS_TSMAC
/* 3 phys on boards with TSMAC */
msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO1);
msp_gpio_pin_hi(MSP_ETHERNET_GPIO1);
msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO2);
msp_gpio_pin_hi(MSP_ETHERNET_GPIO2);
#endif
for (i = 0; i < ARRAY_SIZE(msp_eth_devs); i++) {
ret = platform_device_register(&msp_eth_devs[i]);
printk(KERN_INFO "device: %d, return value = %d\n", i, ret);
if (ret) {
platform_device_unregister(&msp_eth_devs[i]);
break;
}
}
if (ret)
printk(KERN_WARNING "Could not initialize "
"MSPETH device structures.\n");
return ret;
}
subsys_initcall(msp_eth_setup);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment