Commit ecc518ac authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

PCI: remove usages of pcibios_find_class()

parent 7501ea7e
......@@ -70,9 +70,6 @@ MODULE_DEVICE_TABLE(pci, aironet4500_card_pci_tbl);
MODULE_LICENSE("GPL");
static int reverse_probe;
static int awc_pci_init(struct net_device * dev, struct pci_dev *pdev,
int ioaddr, int cis_addr, int mem_addr,u8 pci_irq_line) ;
......@@ -80,38 +77,29 @@ static int awc_pci_init(struct net_device * dev, struct pci_dev *pdev,
int awc4500_pci_probe(struct net_device *dev)
{
int cards_found = 0;
static int pci_index; /* Static, for multiple probe calls. */
u8 pci_irq_line = 0;
// int p;
unsigned char awc_pci_dev, awc_pci_bus;
struct pci_dev *pdev = NULL;
if (!pci_present())
return -1;
for (;pci_index < 0xff; pci_index++) {
u16 vendor, device, pci_command, new_command;
while ((pdev = pci_find_class (PCI_CLASS_NETWORK_OTHER << 8, pdev))) {
u16 pci_command, new_command;
u32 pci_memaddr;
u32 pci_ioaddr;
u32 pci_cisaddr;
struct pci_dev *pdev;
if (pcibios_find_class (PCI_CLASS_NETWORK_OTHER << 8,
reverse_probe ? 0xfe - pci_index : pci_index,
&awc_pci_bus, &awc_pci_dev) != PCIBIOS_SUCCESSFUL){
if (reverse_probe){
if (pdev->vendor != PCI_VENDOR_ID_AIRONET)
continue;
} else {
break;
}
}
pdev = pci_find_slot(awc_pci_bus, awc_pci_dev);
if (!pdev)
if ((pdev->device != PCI_DEVICE_AIRONET_4800_1) &&
(pdev->device != PCI_DEVICE_AIRONET_4800) &&
(pdev->device != PCI_DEVICE_AIRONET_4500))
continue;
if (pci_enable_device(pdev))
continue;
vendor = pdev->vendor;
device = pdev->device;
pci_irq_line = pdev->irq;
pci_memaddr = pci_resource_start (pdev, 0);
pci_cisaddr = pci_resource_start (pdev, 1);
......@@ -120,13 +108,6 @@ int awc4500_pci_probe(struct net_device *dev)
// printk("\n pci capabilities %x and ptr %x \n",pci_caps,pci_caps_ptr);
/* Remove I/O space marker in bit 0. */
if (vendor != PCI_VENDOR_ID_AIRONET)
continue;
if (device != PCI_DEVICE_AIRONET_4800_1 &&
device != PCI_DEVICE_AIRONET_4800 &&
device != PCI_DEVICE_AIRONET_4500 )
continue;
// if (check_region(pci_ioaddr, AIRONET4X00_IO_SIZE) ||
// check_region(pci_cisaddr, AIRONET4X00_CIS_SIZE) ||
// check_region(pci_memaddr, AIRONET4X00_MEM_SIZE)) {
......@@ -151,7 +132,7 @@ int awc4500_pci_probe(struct net_device *dev)
udelay(1000);
*/
if (device == PCI_DEVICE_AIRONET_4800)
if (pdev->device == PCI_DEVICE_AIRONET_4800)
pci_write_config_dword(pdev, 0x40, 0x40000000);
if (awc_pci_init(dev, pdev, pci_ioaddr,pci_cisaddr,pci_memaddr,pci_irq_line)){
......
......@@ -1045,8 +1045,8 @@ int lmc_probe (struct net_device *dev) /*fold00*/
unsigned int pci_irq_line;
u16 vendor, subvendor, device, subdevice;
u32 foundaddr = 0;
unsigned char pci_bus, pci_device_fn;
u8 intcf = 0;
struct pci_dev *pdev = NULL;
/* The card is only available on PCI, so if we don't have a
* PCI bus, we are in trouble.
......@@ -1057,21 +1057,7 @@ int lmc_probe (struct net_device *dev) /*fold00*/
return -1;
}
/* Loop basically until we don't find anymore. */
while (pci_index < 0xff){
struct pci_dev *pdev;
/* The tulip is considered an ethernet class of card... */
if (pcibios_find_class (PCI_CLASS_NETWORK_ETHERNET << 8,
pci_index, &pci_bus,
&pci_device_fn) != PCIBIOS_SUCCESSFUL) {
/* No card found on this pass */
break;
}
/* Read the info we need to determine if this is
* our card or not
*/
pdev = pci_find_slot (pci_bus, pci_device_fn);
if (!pdev) break;
while ((pdev = pci_find_class (PCI_CLASS_NETWORK_ETHERNET << 8, pdev))) {
if (pci_enable_device(pdev))
break;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment