Merge bk://kernel.bkbits.net/gregkh/linux/i2c-2.6

into home.osdl.org:/home/torvalds/v2.5/linux

MAINTAINERS

@@ -922,15 +922,13 @@ M:	drivers@neukum.org
 S:	Maintained
 
 I2C AND SENSORS DRIVERS
-P:      Frodo Looijaard
-M:      frodol@dds.nl
-P:      Philip Edelbrock
-M:      phil@netroedge.com
 P:	Greg Kroah-Hartman
 M:	greg@kroah.com
-L:      sensors@stimpy.netroedge.com
-W:      http://www.lm-sensors.nu/
-S:      Maintained
+P:	Philip Edelbrock
+M:	phil@netroedge.com
+L:	sensors@stimpy.netroedge.com
+W:	http://www.lm-sensors.nu/
+S:	Maintained
 
 i386 BOOT CODE
 P:	Riley H. Williams

drivers/i2c/busses/Kconfig

@@ -69,6 +69,18 @@ config I2C_ELV
 	  This support is also available as a module.  If so, the module 
 	  will be called i2c-elv.
 
+config I2C_HYDRA
+	tristate "CHRP Apple Hydra Mac I/O I2C interface"
+	depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL
+	select I2C_ALGOBIT
+	help
+	  This supports the use of the I2C interface in the Apple Hydra Mac
+	  I/O chip on some CHRP machines (e.g. the LongTrail).  Say Y if you
+	  have such a machine.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-hydra.
+
 config I2C_I801
 	tristate "Intel 801"
 	depends on I2C && PCI && EXPERIMENTAL

drivers/i2c/busses/Makefile

@@ -8,6 +8,7 @@ obj-$(CONFIG_I2C_AMD756)	+= i2c-amd756.o
 obj-$(CONFIG_I2C_AMD8111)	+= i2c-amd8111.o
 obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
 obj-$(CONFIG_I2C_ELV)		+= i2c-elv.o
+obj-$(CONFIG_I2C_HYDRA)		+= i2c-hydra.o
 obj-$(CONFIG_I2C_I801)		+= i2c-i801.o
 obj-$(CONFIG_I2C_I810)		+= i2c-i810.o
 obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o

drivers/i2c/busses/i2c-hydra.c

+/*
+    i2c-hydra.c - Part of lm_sensors,  Linux kernel modules
+                  for hardware monitoring
+
+    i2c Support for the Apple `Hydra' Mac I/O
+
+    Copyright (c) 1999-2004 Geert Uytterhoeven <geert@linux-m68k.org>
+
+    Based on i2c Support for Via Technologies 82C586B South Bridge
+    Copyright (c) 1998, 1999 Kysti Mlkki <kmalkki@cc.hut.fi>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/hydra.h>
+
+
+#define HYDRA_CPD_PD0	0x00000001	/* CachePD lines */
+#define HYDRA_CPD_PD1	0x00000002
+#define HYDRA_CPD_PD2	0x00000004
+#define HYDRA_CPD_PD3	0x00000008
+
+#define HYDRA_SCLK	HYDRA_CPD_PD0
+#define HYDRA_SDAT	HYDRA_CPD_PD1
+#define HYDRA_SCLK_OE	0x00000010
+#define HYDRA_SDAT_OE	0x00000020
+
+static inline void pdregw(void *data, u32 val)
+{
+	struct Hydra *hydra = (struct Hydra *)data;
+	writel(val, &hydra->CachePD);
+}
+
+static inline u32 pdregr(void *data)
+{
+	struct Hydra *hydra = (struct Hydra *)data;
+	return readl(&hydra->CachePD);
+}
+
+static void hydra_bit_setscl(void *data, int state)
+{
+	u32 val = pdregr(data);
+	if (state)
+		val &= ~HYDRA_SCLK_OE;
+	else {
+		val &= ~HYDRA_SCLK;
+		val |= HYDRA_SCLK_OE;
+	}
+	pdregw(data, val);
+}
+
+static void hydra_bit_setsda(void *data, int state)
+{
+	u32 val = pdregr(data);
+	if (state)
+		val &= ~HYDRA_SDAT_OE;
+	else {
+		val &= ~HYDRA_SDAT;
+		val |= HYDRA_SDAT_OE;
+	}
+	pdregw(data, val);
+}
+
+static int hydra_bit_getscl(void *data)
+{
+	return (pdregr(data) & HYDRA_SCLK) != 0;
+}
+
+static int hydra_bit_getsda(void *data)
+{
+	return (pdregr(data) & HYDRA_SDAT) != 0;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static struct i2c_algo_bit_data hydra_bit_data = {
+	.setsda		= hydra_bit_setsda,
+	.setscl		= hydra_bit_setscl,
+	.getsda		= hydra_bit_getsda,
+	.getscl		= hydra_bit_getscl,
+	.udelay		= 5,
+	.mdelay		= 5,
+	.timeout	= HZ
+};
+
+static struct i2c_adapter hydra_adap = {
+	.owner		= THIS_MODULE,
+	.name		= "Hydra i2c",
+	.id		= I2C_HW_B_HYDRA,
+	.algo_data	= &hydra_bit_data,
+};
+
+static struct pci_device_id hydra_ids[] = {
+	{
+		.vendor		= PCI_VENDOR_ID_APPLE,
+		.device		= PCI_DEVICE_ID_APPLE_HYDRA,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+	},
+	{ 0, }
+};
+
+static int __devinit hydra_probe(struct pci_dev *dev,
+				 const struct pci_device_id *id)
+{
+	unsigned long base = pci_resource_start(dev, 0);
+	int res;
+
+	if (!request_mem_region(base+offsetof(struct Hydra, CachePD), 4,
+				hydra_adap.name))
+		return -EBUSY;
+
+	hydra_bit_data.data = ioremap(base, pci_resource_len(dev, 0));
+	if (hydra_bit_data.data == NULL) {
+		release_mem_region(base+offsetof(struct Hydra, CachePD), 4);
+		return -ENODEV;
+	}
+
+	pdregw(hydra_bit_data.data, 0);		/* clear SCLK_OE and SDAT_OE */
+	hydra_adap.dev.parent = &dev->dev;
+	res = i2c_bit_add_bus(&hydra_adap);
+	if (res < 0) {
+		iounmap(hydra_bit_data.data);
+		release_mem_region(base+offsetof(struct Hydra, CachePD), 4);
+		return res;
+	}
+	return 0;
+}
+
+static void __devexit hydra_remove(struct pci_dev *dev)
+{
+	pdregw(hydra_bit_data.data, 0);		/* clear SCLK_OE and SDAT_OE */
+	i2c_bit_del_bus(&hydra_adap);
+	iounmap(hydra_bit_data.data);
+	release_mem_region(pci_resource_start(dev, 0)+
+			   offsetof(struct Hydra, CachePD), 4);
+}
+
+
+static struct pci_driver hydra_driver = {
+	.name		= "hydra smbus",
+	.id_table	= hydra_ids,
+	.probe		= hydra_probe,
+	.remove		= __devexit_p(hydra_remove),
+};
+
+static int __init i2c_hydra_init(void)
+{
+	return pci_module_init(&hydra_driver);
+}
+
+
+static void __exit i2c_hydra_exit(void)
+{
+	pci_unregister_driver(&hydra_driver);
+}
+
+
+
+MODULE_AUTHOR("Geert Uytterhoeven <geert@linux-m68k.org>");
+MODULE_DESCRIPTION("i2c for Apple Hydra Mac I/O");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_hydra_init);
+module_exit(i2c_hydra_exit);
+

drivers/i2c/chips/Kconfig

@@ -45,6 +45,28 @@ config SENSORS_EEPROM
 	  This driver can also be built as a module.  If so, the module
 	  will be called eeprom.
 
+config SENSORS_FSCHER
+	tristate "FSC Hermes"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for Fujitsu Siemens
+	  Computers Hermes sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called fscher.
+
+config SENSORS_GL518SM
+	tristate "Genesys Logic GL518SM"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for Genesys Logic GL518SM
+	  sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called gl518sm.
+
 config SENSORS_IT87
 	tristate "ITE IT87xx and compatibles"
 	depends on I2C && EXPERIMENTAL

drivers/i2c/chips/Makefile

@@ -8,6 +8,8 @@ obj-$(CONFIG_SENSORS_W83781D)	+= w83781d.o
 
 obj-$(CONFIG_SENSORS_ADM1021)	+= adm1021.o
 obj-$(CONFIG_SENSORS_EEPROM)	+= eeprom.o
+obj-$(CONFIG_SENSORS_FSCHER)	+= fscher.o
+obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o
 obj-$(CONFIG_SENSORS_IT87)	+= it87.o
 obj-$(CONFIG_SENSORS_LM75)	+= lm75.o
 obj-$(CONFIG_SENSORS_LM78)	+= lm78.o

drivers/i2c/chips/lm85.c

@@ -816,7 +816,7 @@ int lm85_detect(struct i2c_adapter *adapter, int address,
 			kind = lm85b ;
 		} else if( company == LM85_COMPANY_NATIONAL
 		    && (verstep & 0xf0) == LM85_VERSTEP_GENERIC ) {
-			dev_err(&adapter->dev, "Unrecgonized version/stepping 0x%02x"
+			dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
 				" Defaulting to LM85.\n", verstep);
 			kind = any_chip ;
 		} else if( company == LM85_COMPANY_ANALOG_DEV
@@ -827,7 +827,7 @@ int lm85_detect(struct i2c_adapter *adapter, int address,
 			kind = adt7463 ;
 		} else if( company == LM85_COMPANY_ANALOG_DEV
 		    && (verstep & 0xf0) == LM85_VERSTEP_GENERIC ) {
-			dev_err(&adapter->dev, "Unrecgonized version/stepping 0x%02x"
+			dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
 				" Defaulting to ADM1027.\n", verstep);
 			kind = adm1027 ;
 		} else if( kind == 0 && (verstep & 0xf0) == 0x60) {
@@ -1204,7 +1204,7 @@ static void  __exit sm_lm85_exit(void)
 
 /* Thanks to Richard Barrington for adding the LM85 to sensors-detect.
  * Thanks to Margit Schubert-While <margitsw@t-online.de> for help with
- *     post 2.7.0 CVS changes
+ *     post 2.7.0 CVS changes.
  */
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, Margit Schubert-While <margitsw@t-online.de>");

drivers/i2c/chips/w83l785ts.c

@@ -38,6 +38,9 @@
 #include <linux/i2c.h>
 #include <linux/i2c-sensor.h>
 
+/* How many retries on register read error */
+#define MAX_RETRIES	5
+
 /*
  * Address to scan
  * Address is fully defined internally and cannot be changed.
@@ -82,6 +85,7 @@ static int w83l785ts_attach_adapter(struct i2c_adapter *adapter);
 static int w83l785ts_detect(struct i2c_adapter *adapter, int address,
 	int kind);
 static int w83l785ts_detach_client(struct i2c_client *client);
+static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval);
 static void w83l785ts_update_client(struct i2c_client *client);
 
 /*
@@ -137,8 +141,8 @@ static ssize_t show_temp_over(struct device *dev, char *buf)
 	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
 }
 
-static DEVICE_ATTR(temp_input, S_IRUGO, show_temp, NULL)
-static DEVICE_ATTR(temp_max, S_IRUGO, show_temp_over, NULL)
+static DEVICE_ATTR(temp_input1, S_IRUGO, show_temp, NULL)
+static DEVICE_ATTR(temp_max1, S_IRUGO, show_temp_over, NULL)
 
 /*
  * Real code
@@ -196,10 +200,10 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind)
 	 * are skipped.
 	 */
 	if (kind < 0) { /* detection */
-		if (((i2c_smbus_read_byte_data(new_client,
-		      W83L785TS_REG_CONFIG) & 0x80) != 0x00)
-		 || ((i2c_smbus_read_byte_data(new_client,
-		      W83L785TS_REG_TYPE) & 0xFC) != 0x00)) {
+		if (((w83l785ts_read_value(new_client,
+		      W83L785TS_REG_CONFIG, 0) & 0x80) != 0x00)
+		 || ((w83l785ts_read_value(new_client,
+		      W83L785TS_REG_TYPE, 0) & 0xFC) != 0x00)) {
 			dev_dbg(&adapter->dev,
 				"W83L785TS-S detection failed at 0x%02x.\n",
 				address);
@@ -211,12 +215,12 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind)
 		u16 man_id;
 		u8 chip_id;
 
-		man_id = (i2c_smbus_read_byte_data(new_client,
-			 W83L785TS_REG_MAN_ID1) << 8) +
-			 i2c_smbus_read_byte_data(new_client,
-			 W83L785TS_REG_MAN_ID2);
-		chip_id = i2c_smbus_read_byte_data(new_client,
-			  W83L785TS_REG_CHIP_ID);
+		man_id = (w83l785ts_read_value(new_client,
+			 W83L785TS_REG_MAN_ID1, 0) << 8) +
+			 w83l785ts_read_value(new_client,
+			 W83L785TS_REG_MAN_ID2, 0);
+		chip_id = w83l785ts_read_value(new_client,
+			  W83L785TS_REG_CHIP_ID, 0);
 
 		if (man_id == 0x5CA3) { /* Winbond */
 			if (chip_id == 0x70) { /* W83L785TS-S */
@@ -239,6 +243,9 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind)
 	data->valid = 0;
 	init_MUTEX(&data->update_lock);
 
+	/* Default values in case the first read fails (unlikely). */
+	data->temp_over = data->temp = 0;
+
 	/* Tell the I2C layer a new client has arrived. */
 	if ((err = i2c_attach_client(new_client))) 
 		goto exit_free;
@@ -249,8 +256,8 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind)
 	 */
 
 	/* Register sysfs hooks */
-	device_create_file(&new_client->dev, &dev_attr_temp_input);
-	device_create_file(&new_client->dev, &dev_attr_temp_max);
+	device_create_file(&new_client->dev, &dev_attr_temp_input1);
+	device_create_file(&new_client->dev, &dev_attr_temp_max1);
 
 	return 0;
 
@@ -274,6 +281,26 @@ static int w83l785ts_detach_client(struct i2c_client *client)
 	return 0;
 }
 
+static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval)
+{
+	int value, i;
+
+	/* Frequent read errors have been reported on Asus boards, so we
+	 * retry on read errors. If it still fails (unlikely), return the
+	 * default value requested by the caller. */
+	for (i = 1; i <= MAX_RETRIES; i++) {
+		value = i2c_smbus_read_byte_data(client, reg);
+		if (value >= 0)
+			return value;
+		dev_dbg(&client->dev, "Read failed, will retry in %d.\n", i);
+		i2c_delay(i);
+	}
+
+	dev_err(&client->dev, "Couldn't read value from register. "
+		"Please report.\n");
+	return defval;
+}
+
 static void w83l785ts_update_client(struct i2c_client *client)
 {
 	struct w83l785ts_data *data = i2c_get_clientdata(client);
@@ -284,10 +311,10 @@ static void w83l785ts_update_client(struct i2c_client *client)
 	 || (jiffies - data->last_updated > HZ * 2)
 	 || (jiffies < data->last_updated)) {
 		dev_dbg(&client->dev, "Updating w83l785ts data.\n");
-		data->temp = i2c_smbus_read_byte_data(client,
-			     W83L785TS_REG_TEMP);
-		data->temp_over = i2c_smbus_read_byte_data(client,
-				  W83L785TS_REG_TEMP_OVER);
+		data->temp = w83l785ts_read_value(client,
+			     W83L785TS_REG_TEMP, data->temp);
+		data->temp_over = w83l785ts_read_value(client,
+				  W83L785TS_REG_TEMP_OVER, data->temp_over);
 
 		data->last_updated = jiffies;
 		data->valid = 1;

drivers/i2c/i2c-core.c

@@ -598,7 +598,7 @@ int i2c_master_recv(struct i2c_client *client, char *buf ,int count)
 		ret = adap->algo->master_xfer(adap,&msg,1);
 		up(&adap->bus_lock);
 	
-		dev_dbg(&client->dev, "master_recv: return:%d (count:%d, addr:0x%02x)\n",
+		dev_dbg(&client->adapter->dev, "master_recv: return:%d (count:%d, addr:0x%02x)\n",
 			ret, count, client->addr);
 	
 		/* if everything went ok (i.e. 1 msg transmitted), return #bytes

include/linux/i2c-id.h

@@ -156,6 +156,7 @@
 #define I2C_DRIVERID_LM83 1040
 #define I2C_DRIVERID_LM90 1042
 #define I2C_DRIVERID_ASB100 1043
+#define I2C_DRIVERID_FSCHER 1046
 #define I2C_DRIVERID_W83L785TS 1047
 
 /*