drm/i915: Address broxton phy registers based on phy and channel number

The port registers related to the phys in broxton map to different
channels and specific phys. Make that mapping explicit.

v2: Pass enum dpio_phy to macros instead of mmio base. (Imre)

v3: Fix typo in macros. (Imre)

v4: Also change variables from u32 to enum dpio_phy. (Imre)
    Remove leftovers from previous version. (Imre)

v5: Actually git add the changes.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476863940-6019-1-git-send-email-ander.conselvan.de.oliveira@intel.com

drivers/gpu/drm/i915/i915_drv.h

@@ -3761,6 +3761,8 @@ u32 vlv_flisdsi_read(struct drm_i915_private *dev_priv, u32 reg);
 void vlv_flisdsi_write(struct drm_i915_private *dev_priv, u32 reg, u32 val);
 
 /* intel_dpio_phy.c */
+void bxt_port_to_phy_channel(enum port port,
+			     enum dpio_phy *phy, enum dpio_channel *ch);
 void bxt_ddi_phy_set_signal_level(struct drm_i915_private *dev_priv,
 				  enum port port, u32 margin, u32 scale,
 				  u32 enable, u32 deemphasis);

drivers/gpu/drm/i915/i915_reg.h

@@ -1186,7 +1186,19 @@ enum skl_disp_power_wells {
 #define   DPIO_UPAR_SHIFT		30
 
 /* BXT PHY registers */
-#define _BXT_PHY(phy, a, b)		_MMIO_PIPE((phy), (a), (b))
+#define _BXT_PHY0_BASE			0x6C000
+#define _BXT_PHY1_BASE			0x162000
+#define BXT_PHY_BASE(phy)		_PIPE((phy), _BXT_PHY0_BASE, \
+						     _BXT_PHY1_BASE)
+
+#define _BXT_PHY(phy, reg)						\
+	_MMIO(BXT_PHY_BASE(phy) - _BXT_PHY0_BASE + (reg))
+
+#define _BXT_PHY_CH(phy, ch, reg_ch0, reg_ch1)		\
+	(BXT_PHY_BASE(phy) + _PIPE((ch), (reg_ch0) - _BXT_PHY0_BASE,	\
+					 (reg_ch1) - _BXT_PHY0_BASE))
+#define _MMIO_BXT_PHY_CH(phy, ch, reg_ch0, reg_ch1)		\
+	_MMIO(_BXT_PHY_CH(phy, ch, reg_ch0, reg_ch1))
 
 #define BXT_P_CR_GT_DISP_PWRON		_MMIO(0x138090)
 #define   GT_DISPLAY_POWER_ON(phy)	(1 << (phy))
@@ -1203,8 +1215,8 @@ enum skl_disp_power_wells {
 #define _PHY_CTL_FAMILY_EDP		0x64C80
 #define _PHY_CTL_FAMILY_DDI		0x64C90
 #define   COMMON_RESET_DIS		(1 << 31)
-#define BXT_PHY_CTL_FAMILY(phy)		_BXT_PHY((phy), _PHY_CTL_FAMILY_DDI, \
-							_PHY_CTL_FAMILY_EDP)
+#define BXT_PHY_CTL_FAMILY(phy)		_MMIO_PIPE((phy), _PHY_CTL_FAMILY_DDI, \
+							  _PHY_CTL_FAMILY_EDP)
 
 /* BXT PHY PLL registers */
 #define _PORT_PLL_A			0x46074
@@ -1224,18 +1236,18 @@ enum skl_disp_power_wells {
 #define   PORT_PLL_P2_SHIFT		8
 #define   PORT_PLL_P2_MASK		(0x1f << PORT_PLL_P2_SHIFT)
 #define   PORT_PLL_P2(x)		((x)  << PORT_PLL_P2_SHIFT)
-#define BXT_PORT_PLL_EBB_0(port)	_MMIO_PORT3(port, _PORT_PLL_EBB_0_A, \
-						_PORT_PLL_EBB_0_B,	\
-						_PORT_PLL_EBB_0_C)
+#define BXT_PORT_PLL_EBB_0(phy, ch)	_MMIO_BXT_PHY_CH(phy, ch, \
+							 _PORT_PLL_EBB_0_B, \
+							 _PORT_PLL_EBB_0_C)
 
 #define _PORT_PLL_EBB_4_A		0x162038
 #define _PORT_PLL_EBB_4_B		0x6C038
 #define _PORT_PLL_EBB_4_C		0x6C344
 #define   PORT_PLL_10BIT_CLK_ENABLE	(1 << 13)
 #define   PORT_PLL_RECALIBRATE		(1 << 14)
-#define BXT_PORT_PLL_EBB_4(port)	_MMIO_PORT3(port, _PORT_PLL_EBB_4_A, \
-						_PORT_PLL_EBB_4_B,	\
-						_PORT_PLL_EBB_4_C)
+#define BXT_PORT_PLL_EBB_4(phy, ch)	_MMIO_BXT_PHY_CH(phy, ch, \
+							 _PORT_PLL_EBB_4_B, \
+							 _PORT_PLL_EBB_4_C)
 
 #define _PORT_PLL_0_A			0x162100
 #define _PORT_PLL_0_B			0x6C100
@@ -1266,62 +1278,56 @@ enum skl_disp_power_wells {
 #define  PORT_PLL_DCO_AMP_DEFAULT	15
 #define  PORT_PLL_DCO_AMP_MASK		0x3c00
 #define  PORT_PLL_DCO_AMP(x)		((x)<<10)
-#define _PORT_PLL_BASE(port)		_PORT3(port, _PORT_PLL_0_A,	\
-						_PORT_PLL_0_B,		\
-						_PORT_PLL_0_C)
-#define BXT_PORT_PLL(port, idx)		_MMIO(_PORT_PLL_BASE(port) + (idx) * 4)
+#define _PORT_PLL_BASE(phy, ch)		_BXT_PHY_CH(phy, ch, \
+						    _PORT_PLL_0_B, \
+						    _PORT_PLL_0_C)
+#define BXT_PORT_PLL(phy, ch, idx)	_MMIO(_PORT_PLL_BASE(phy, ch) + \
+					      (idx) * 4)
 
 /* BXT PHY common lane registers */
 #define _PORT_CL1CM_DW0_A		0x162000
 #define _PORT_CL1CM_DW0_BC		0x6C000
 #define   PHY_POWER_GOOD		(1 << 16)
 #define   PHY_RESERVED			(1 << 7)
-#define BXT_PORT_CL1CM_DW0(phy)		_BXT_PHY((phy), _PORT_CL1CM_DW0_BC, \
-							_PORT_CL1CM_DW0_A)
+#define BXT_PORT_CL1CM_DW0(phy)		_BXT_PHY((phy), _PORT_CL1CM_DW0_BC)
 
 #define _PORT_CL1CM_DW9_A		0x162024
 #define _PORT_CL1CM_DW9_BC		0x6C024
 #define   IREF0RC_OFFSET_SHIFT		8
 #define   IREF0RC_OFFSET_MASK		(0xFF << IREF0RC_OFFSET_SHIFT)
-#define BXT_PORT_CL1CM_DW9(phy)		_BXT_PHY((phy), _PORT_CL1CM_DW9_BC, \
-							_PORT_CL1CM_DW9_A)
+#define BXT_PORT_CL1CM_DW9(phy)		_BXT_PHY((phy), _PORT_CL1CM_DW9_BC)
 
 #define _PORT_CL1CM_DW10_A		0x162028
 #define _PORT_CL1CM_DW10_BC		0x6C028
 #define   IREF1RC_OFFSET_SHIFT		8
 #define   IREF1RC_OFFSET_MASK		(0xFF << IREF1RC_OFFSET_SHIFT)
-#define BXT_PORT_CL1CM_DW10(phy)	_BXT_PHY((phy), _PORT_CL1CM_DW10_BC, \
-							_PORT_CL1CM_DW10_A)
+#define BXT_PORT_CL1CM_DW10(phy)	_BXT_PHY((phy), _PORT_CL1CM_DW10_BC)
 
 #define _PORT_CL1CM_DW28_A		0x162070
 #define _PORT_CL1CM_DW28_BC		0x6C070
 #define   OCL1_POWER_DOWN_EN		(1 << 23)
 #define   DW28_OLDO_DYN_PWR_DOWN_EN	(1 << 22)
 #define   SUS_CLK_CONFIG		0x3
-#define BXT_PORT_CL1CM_DW28(phy)	_BXT_PHY((phy), _PORT_CL1CM_DW28_BC, \
-							_PORT_CL1CM_DW28_A)
+#define BXT_PORT_CL1CM_DW28(phy)	_BXT_PHY((phy), _PORT_CL1CM_DW28_BC)
 
 #define _PORT_CL1CM_DW30_A		0x162078
 #define _PORT_CL1CM_DW30_BC		0x6C078
 #define   OCL2_LDOFUSE_PWR_DIS		(1 << 6)
-#define BXT_PORT_CL1CM_DW30(phy)	_BXT_PHY((phy), _PORT_CL1CM_DW30_BC, \
-							_PORT_CL1CM_DW30_A)
+#define BXT_PORT_CL1CM_DW30(phy)	_BXT_PHY((phy), _PORT_CL1CM_DW30_BC)
 
 /* The spec defines this only for BXT PHY0, but lets assume that this
  * would exist for PHY1 too if it had a second channel.
  */
 #define _PORT_CL2CM_DW6_A		0x162358
 #define _PORT_CL2CM_DW6_BC		0x6C358
-#define BXT_PORT_CL2CM_DW6(phy)		_BXT_PHY((phy), _PORT_CL2CM_DW6_BC, \
-							_PORT_CL2CM_DW6_A)
+#define BXT_PORT_CL2CM_DW6(phy)		_BXT_PHY((phy), _PORT_CL2CM_DW6_BC)
 #define   DW6_OLDO_DYN_PWR_DOWN_EN	(1 << 28)
 
 /* BXT PHY Ref registers */
 #define _PORT_REF_DW3_A			0x16218C
 #define _PORT_REF_DW3_BC		0x6C18C
 #define   GRC_DONE			(1 << 22)
-#define BXT_PORT_REF_DW3(phy)		_BXT_PHY((phy), _PORT_REF_DW3_BC, \
-							_PORT_REF_DW3_A)
+#define BXT_PORT_REF_DW3(phy)		_BXT_PHY((phy), _PORT_REF_DW3_BC)
 
 #define _PORT_REF_DW6_A			0x162198
 #define _PORT_REF_DW6_BC		0x6C198
@@ -1332,15 +1338,13 @@ enum skl_disp_power_wells {
 #define   GRC_CODE_SLOW_SHIFT		8
 #define   GRC_CODE_SLOW_MASK		(0xFF << GRC_CODE_SLOW_SHIFT)
 #define   GRC_CODE_NOM_MASK		0xFF
-#define BXT_PORT_REF_DW6(phy)		_BXT_PHY((phy), _PORT_REF_DW6_BC,	\
-						      _PORT_REF_DW6_A)
+#define BXT_PORT_REF_DW6(phy)		_BXT_PHY((phy), _PORT_REF_DW6_BC)
 
 #define _PORT_REF_DW8_A			0x1621A0
 #define _PORT_REF_DW8_BC		0x6C1A0
 #define   GRC_DIS			(1 << 15)
 #define   GRC_RDY_OVRD			(1 << 1)
-#define BXT_PORT_REF_DW8(phy)		_BXT_PHY((phy), _PORT_REF_DW8_BC,	\
-						      _PORT_REF_DW8_A)
+#define BXT_PORT_REF_DW8(phy)		_BXT_PHY((phy), _PORT_REF_DW8_BC)
 
 /* BXT PHY PCS registers */
 #define _PORT_PCS_DW10_LN01_A		0x162428
@@ -1349,12 +1353,13 @@ enum skl_disp_power_wells {
 #define _PORT_PCS_DW10_GRP_A		0x162C28
 #define _PORT_PCS_DW10_GRP_B		0x6CC28
 #define _PORT_PCS_DW10_GRP_C		0x6CE28
-#define BXT_PORT_PCS_DW10_LN01(port)	_MMIO_PORT3(port, _PORT_PCS_DW10_LN01_A, \
-						     _PORT_PCS_DW10_LN01_B, \
-						     _PORT_PCS_DW10_LN01_C)
-#define BXT_PORT_PCS_DW10_GRP(port)	_MMIO_PORT3(port, _PORT_PCS_DW10_GRP_A,  \
-						     _PORT_PCS_DW10_GRP_B,  \
-						     _PORT_PCS_DW10_GRP_C)
+#define BXT_PORT_PCS_DW10_LN01(phy, ch)	_MMIO_BXT_PHY_CH(phy, ch, \
+							 _PORT_PCS_DW10_LN01_B, \
+							 _PORT_PCS_DW10_LN01_C)
+#define BXT_PORT_PCS_DW10_GRP(phy, ch)	_MMIO_BXT_PHY_CH(phy, ch, \
+							 _PORT_PCS_DW10_GRP_B, \
+							 _PORT_PCS_DW10_GRP_C)
+
 #define   TX2_SWING_CALC_INIT		(1 << 31)
 #define   TX1_SWING_CALC_INIT		(1 << 30)
 
@@ -1369,15 +1374,15 @@ enum skl_disp_power_wells {
 #define _PORT_PCS_DW12_GRP_C		0x6CE30
 #define   LANESTAGGER_STRAP_OVRD	(1 << 6)
 #define   LANE_STAGGER_MASK		0x1F
-#define BXT_PORT_PCS_DW12_LN01(port)	_MMIO_PORT3(port, _PORT_PCS_DW12_LN01_A, \
-						     _PORT_PCS_DW12_LN01_B, \
-						     _PORT_PCS_DW12_LN01_C)
-#define BXT_PORT_PCS_DW12_LN23(port)	_MMIO_PORT3(port, _PORT_PCS_DW12_LN23_A, \
-						     _PORT_PCS_DW12_LN23_B, \
-						     _PORT_PCS_DW12_LN23_C)
-#define BXT_PORT_PCS_DW12_GRP(port)	_MMIO_PORT3(port, _PORT_PCS_DW12_GRP_A, \
-						     _PORT_PCS_DW12_GRP_B, \
-						     _PORT_PCS_DW12_GRP_C)
+#define BXT_PORT_PCS_DW12_LN01(phy, ch)	_MMIO_BXT_PHY_CH(phy, ch, \
+							 _PORT_PCS_DW12_LN01_B, \
+							 _PORT_PCS_DW12_LN01_C)
+#define BXT_PORT_PCS_DW12_LN23(phy, ch)	_MMIO_BXT_PHY_CH(phy, ch, \
+							 _PORT_PCS_DW12_LN23_B, \
+							 _PORT_PCS_DW12_LN23_C)
+#define BXT_PORT_PCS_DW12_GRP(phy, ch)	_MMIO_BXT_PHY_CH(phy, ch, \
+							 _PORT_PCS_DW12_GRP_B, \
+							 _PORT_PCS_DW12_GRP_C)
 
 /* BXT PHY TX registers */
 #define _BXT_LANE_OFFSET(lane)           (((lane) >> 1) * 0x200 +	\
@@ -1389,12 +1394,12 @@ enum skl_disp_power_wells {
 #define _PORT_TX_DW2_GRP_A		0x162D08
 #define _PORT_TX_DW2_GRP_B		0x6CD08
 #define _PORT_TX_DW2_GRP_C		0x6CF08
-#define BXT_PORT_TX_DW2_GRP(port)	_MMIO_PORT3(port, _PORT_TX_DW2_GRP_A,  \
-						     _PORT_TX_DW2_GRP_B,  \
-						     _PORT_TX_DW2_GRP_C)
-#define BXT_PORT_TX_DW2_LN0(port)	_MMIO_PORT3(port, _PORT_TX_DW2_LN0_A,  \
-						     _PORT_TX_DW2_LN0_B,  \
-						     _PORT_TX_DW2_LN0_C)
+#define BXT_PORT_TX_DW2_LN0(phy, ch)	_MMIO_BXT_PHY_CH(phy, ch, \
+							 _PORT_TX_DW2_LN0_B, \
+							 _PORT_TX_DW2_LN0_C)
+#define BXT_PORT_TX_DW2_GRP(phy, ch)	_MMIO_BXT_PHY_CH(phy, ch, \
+							 _PORT_TX_DW2_GRP_B, \
+							 _PORT_TX_DW2_GRP_C)
 #define   MARGIN_000_SHIFT		16
 #define   MARGIN_000			(0xFF << MARGIN_000_SHIFT)
 #define   UNIQ_TRANS_SCALE_SHIFT	8
@@ -1406,12 +1411,12 @@ enum skl_disp_power_wells {
 #define _PORT_TX_DW3_GRP_A		0x162D0C
 #define _PORT_TX_DW3_GRP_B		0x6CD0C
 #define _PORT_TX_DW3_GRP_C		0x6CF0C
-#define BXT_PORT_TX_DW3_GRP(port)	_MMIO_PORT3(port, _PORT_TX_DW3_GRP_A,  \
-						     _PORT_TX_DW3_GRP_B,  \
-						     _PORT_TX_DW3_GRP_C)
-#define BXT_PORT_TX_DW3_LN0(port)	_MMIO_PORT3(port, _PORT_TX_DW3_LN0_A,  \
-						     _PORT_TX_DW3_LN0_B,  \
-						     _PORT_TX_DW3_LN0_C)
+#define BXT_PORT_TX_DW3_LN0(phy, ch)	_MMIO_BXT_PHY_CH(phy, ch, \
+							 _PORT_TX_DW3_LN0_B, \
+							 _PORT_TX_DW3_LN0_C)
+#define BXT_PORT_TX_DW3_GRP(phy, ch)	_MMIO_BXT_PHY_CH(phy, ch, \
+							 _PORT_TX_DW3_GRP_B, \
+							 _PORT_TX_DW3_GRP_C)
 #define   SCALE_DCOMP_METHOD		(1 << 26)
 #define   UNIQUE_TRANGE_EN_METHOD	(1 << 27)
 
@@ -1421,12 +1426,12 @@ enum skl_disp_power_wells {
 #define _PORT_TX_DW4_GRP_A		0x162D10
 #define _PORT_TX_DW4_GRP_B		0x6CD10
 #define _PORT_TX_DW4_GRP_C		0x6CF10
-#define BXT_PORT_TX_DW4_LN0(port)	_MMIO_PORT3(port, _PORT_TX_DW4_LN0_A,  \
-						     _PORT_TX_DW4_LN0_B,  \
-						     _PORT_TX_DW4_LN0_C)
-#define BXT_PORT_TX_DW4_GRP(port)	_MMIO_PORT3(port, _PORT_TX_DW4_GRP_A,  \
-						     _PORT_TX_DW4_GRP_B,  \
-						     _PORT_TX_DW4_GRP_C)
+#define BXT_PORT_TX_DW4_LN0(phy, ch)	_MMIO_BXT_PHY_CH(phy, ch, \
+							 _PORT_TX_DW4_LN0_B, \
+							 _PORT_TX_DW4_LN0_C)
+#define BXT_PORT_TX_DW4_GRP(phy, ch)	_MMIO_BXT_PHY_CH(phy, ch, \
+							 _PORT_TX_DW4_GRP_B, \
+							 _PORT_TX_DW4_GRP_C)
 #define   DEEMPH_SHIFT			24
 #define   DE_EMPHASIS			(0xFF << DEEMPH_SHIFT)
 
@@ -1435,10 +1440,10 @@ enum skl_disp_power_wells {
 #define _PORT_TX_DW14_LN0_C		0x6C938
 #define   LATENCY_OPTIM_SHIFT		30
 #define   LATENCY_OPTIM			(1 << LATENCY_OPTIM_SHIFT)
-#define BXT_PORT_TX_DW14_LN(port, lane)	_MMIO(_PORT3((port), _PORT_TX_DW14_LN0_A,   \
-							_PORT_TX_DW14_LN0_B,   \
-							_PORT_TX_DW14_LN0_C) + \
-					 _BXT_LANE_OFFSET(lane))
+#define BXT_PORT_TX_DW14_LN(phy, ch, lane)				\
+	_MMIO(_BXT_PHY_CH(phy, ch, _PORT_TX_DW14_LN0_B,			\
+				   _PORT_TX_DW14_LN0_C) +		\
+	      _BXT_LANE_OFFSET(lane))
 
 /* UAIMI scratch pad register 1 */
 #define UAIMI_SPR1			_MMIO(0x4F074)

drivers/gpu/drm/i915/intel_dpio_phy.c

@@ -167,26 +167,58 @@ static u32 bxt_phy_port_mask(const struct bxt_ddi_phy_info *phy_info)
 		BIT(phy_info->channel[DPIO_CH0].port);
 }
 
+void bxt_port_to_phy_channel(enum port port,
+			     enum dpio_phy *phy, enum dpio_channel *ch)
+{
+	const struct bxt_ddi_phy_info *phy_info;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(bxt_ddi_phy_info); i++) {
+		phy_info = &bxt_ddi_phy_info[i];
+
+		if (port == phy_info->channel[DPIO_CH0].port) {
+			*phy = i;
+			*ch = DPIO_CH0;
+			return;
+		}
+
+		if (phy_info->dual_channel &&
+		    port == phy_info->channel[DPIO_CH1].port) {
+			*phy = i;
+			*ch = DPIO_CH1;
+			return;
+		}
+	}
+
+	WARN(1, "PHY not found for PORT %c", port_name(port));
+	*phy = DPIO_PHY0;
+	*ch = DPIO_CH0;
+}
+
 void bxt_ddi_phy_set_signal_level(struct drm_i915_private *dev_priv,
 				  enum port port, u32 margin, u32 scale,
 				  u32 enable, u32 deemphasis)
 {
 	u32 val;
+	enum dpio_phy phy;
+	enum dpio_channel ch;
+
+	bxt_port_to_phy_channel(port, &phy, &ch);
 
 	/*
 	 * While we write to the group register to program all lanes at once we
 	 * can read only lane registers and we pick lanes 0/1 for that.
 	 */
-	val = I915_READ(BXT_PORT_PCS_DW10_LN01(port));
+	val = I915_READ(BXT_PORT_PCS_DW10_LN01(phy, ch));
 	val &= ~(TX2_SWING_CALC_INIT | TX1_SWING_CALC_INIT);
-	I915_WRITE(BXT_PORT_PCS_DW10_GRP(port), val);
+	I915_WRITE(BXT_PORT_PCS_DW10_GRP(phy, ch), val);
 
-	val = I915_READ(BXT_PORT_TX_DW2_LN0(port));
+	val = I915_READ(BXT_PORT_TX_DW2_LN0(phy, ch));
 	val &= ~(MARGIN_000 | UNIQ_TRANS_SCALE);
 	val |= margin << MARGIN_000_SHIFT | scale << UNIQ_TRANS_SCALE_SHIFT;
-	I915_WRITE(BXT_PORT_TX_DW2_GRP(port), val);
+	I915_WRITE(BXT_PORT_TX_DW2_GRP(phy, ch), val);
 
-	val = I915_READ(BXT_PORT_TX_DW3_LN0(port));
+	val = I915_READ(BXT_PORT_TX_DW3_LN0(phy, ch));
 	val &= ~SCALE_DCOMP_METHOD;
 	if (enable)
 		val |= SCALE_DCOMP_METHOD;
@@ -194,16 +226,16 @@ void bxt_ddi_phy_set_signal_level(struct drm_i915_private *dev_priv,
 	if ((val & UNIQUE_TRANGE_EN_METHOD) && !(val & SCALE_DCOMP_METHOD))
 		DRM_ERROR("Disabled scaling while ouniqetrangenmethod was set");
 
-	I915_WRITE(BXT_PORT_TX_DW3_GRP(port), val);
+	I915_WRITE(BXT_PORT_TX_DW3_GRP(phy, ch), val);
 
-	val = I915_READ(BXT_PORT_TX_DW4_LN0(port));
+	val = I915_READ(BXT_PORT_TX_DW4_LN0(phy, ch));
 	val &= ~DE_EMPHASIS;
 	val |= deemphasis << DEEMPH_SHIFT;
-	I915_WRITE(BXT_PORT_TX_DW4_GRP(port), val);
+	I915_WRITE(BXT_PORT_TX_DW4_GRP(phy, ch), val);
 
-	val = I915_READ(BXT_PORT_PCS_DW10_LN01(port));
+	val = I915_READ(BXT_PORT_PCS_DW10_LN01(phy, ch));
 	val |= TX2_SWING_CALC_INIT | TX1_SWING_CALC_INIT;
-	I915_WRITE(BXT_PORT_PCS_DW10_GRP(port), val);
+	I915_WRITE(BXT_PORT_PCS_DW10_GRP(phy, ch), val);
 }
 
 bool bxt_ddi_phy_is_enabled(struct drm_i915_private *dev_priv,
@@ -490,7 +522,7 @@ bool bxt_ddi_phy_verify_state(struct drm_i915_private *dev_priv,
 		mask = GRC_CODE_FAST_MASK | GRC_CODE_SLOW_MASK |
 		       GRC_CODE_NOM_MASK;
 		ok &= _CHK(BXT_PORT_REF_DW6(phy), mask, grc_code,
-			    "BXT_PORT_REF_DW6(%d)", phy);
+			   "BXT_PORT_REF_DW6(%d)", phy);
 
 		mask = GRC_DIS | GRC_RDY_OVRD;
 		ok &= _CHK(BXT_PORT_REF_DW8(phy), mask, mask,
@@ -525,10 +557,14 @@ void bxt_ddi_phy_set_lane_optim_mask(struct intel_encoder *encoder,
 	struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
 	struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev);
 	enum port port = dport->port;
+	enum dpio_phy phy;
+	enum dpio_channel ch;
 	int lane;
 
+	bxt_port_to_phy_channel(port, &phy, &ch);
+
 	for (lane = 0; lane < 4; lane++) {
-		u32 val = I915_READ(BXT_PORT_TX_DW14_LN(port, lane));
+		u32 val = I915_READ(BXT_PORT_TX_DW14_LN(phy, ch, lane));
 
 		/*
 		 * Note that on CHV this flag is called UPAR, but has
@@ -538,7 +574,7 @@ void bxt_ddi_phy_set_lane_optim_mask(struct intel_encoder *encoder,
 		if (lane_lat_optim_mask & BIT(lane))
 			val |= LATENCY_OPTIM;
 
-		I915_WRITE(BXT_PORT_TX_DW14_LN(port, lane), val);
+		I915_WRITE(BXT_PORT_TX_DW14_LN(phy, ch, lane), val);
 	}
 }
 
@@ -548,12 +584,16 @@ bxt_ddi_phy_get_lane_lat_optim_mask(struct intel_encoder *encoder)
 	struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
 	struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev);
 	enum port port = dport->port;
+	enum dpio_phy phy;
+	enum dpio_channel ch;
 	int lane;
 	uint8_t mask;
 
+	bxt_port_to_phy_channel(port, &phy, &ch);
+
 	mask = 0;
 	for (lane = 0; lane < 4; lane++) {
-		u32 val = I915_READ(BXT_PORT_TX_DW14_LN(port, lane));
+		u32 val = I915_READ(BXT_PORT_TX_DW14_LN(phy, ch, lane));
 
 		if (val & LATENCY_OPTIM)
 			mask |= BIT(lane);

drivers/gpu/drm/i915/intel_dpll_mgr.c

@@ -1371,6 +1371,10 @@ static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv,
 {
 	uint32_t temp;
 	enum port port = (enum port)pll->id;	/* 1:1 port->PLL mapping */
+	enum dpio_phy phy;
+	enum dpio_channel ch;
+
+	bxt_port_to_phy_channel(port, &phy, &ch);
 
 	/* Non-SSC reference */
 	temp = I915_READ(BXT_PORT_PLL_ENABLE(port));
@@ -1378,72 +1382,72 @@ static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv,
 	I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp);
 
 	/* Disable 10 bit clock */
-	temp = I915_READ(BXT_PORT_PLL_EBB_4(port));
+	temp = I915_READ(BXT_PORT_PLL_EBB_4(phy, ch));
 	temp &= ~PORT_PLL_10BIT_CLK_ENABLE;
-	I915_WRITE(BXT_PORT_PLL_EBB_4(port), temp);
+	I915_WRITE(BXT_PORT_PLL_EBB_4(phy, ch), temp);
 
 	/* Write P1 & P2 */
-	temp = I915_READ(BXT_PORT_PLL_EBB_0(port));
+	temp = I915_READ(BXT_PORT_PLL_EBB_0(phy, ch));
 	temp &= ~(PORT_PLL_P1_MASK | PORT_PLL_P2_MASK);
 	temp |= pll->config.hw_state.ebb0;
-	I915_WRITE(BXT_PORT_PLL_EBB_0(port), temp);
+	I915_WRITE(BXT_PORT_PLL_EBB_0(phy, ch), temp);
 
 	/* Write M2 integer */
-	temp = I915_READ(BXT_PORT_PLL(port, 0));
+	temp = I915_READ(BXT_PORT_PLL(phy, ch, 0));
 	temp &= ~PORT_PLL_M2_MASK;
 	temp |= pll->config.hw_state.pll0;
-	I915_WRITE(BXT_PORT_PLL(port, 0), temp);
+	I915_WRITE(BXT_PORT_PLL(phy, ch, 0), temp);
 
 	/* Write N */
-	temp = I915_READ(BXT_PORT_PLL(port, 1));
+	temp = I915_READ(BXT_PORT_PLL(phy, ch, 1));
 	temp &= ~PORT_PLL_N_MASK;
 	temp |= pll->config.hw_state.pll1;
-	I915_WRITE(BXT_PORT_PLL(port, 1), temp);
+	I915_WRITE(BXT_PORT_PLL(phy, ch, 1), temp);
 
 	/* Write M2 fraction */
-	temp = I915_READ(BXT_PORT_PLL(port, 2));
+	temp = I915_READ(BXT_PORT_PLL(phy, ch, 2));
 	temp &= ~PORT_PLL_M2_FRAC_MASK;
 	temp |= pll->config.hw_state.pll2;
-	I915_WRITE(BXT_PORT_PLL(port, 2), temp);
+	I915_WRITE(BXT_PORT_PLL(phy, ch, 2), temp);
 
 	/* Write M2 fraction enable */
-	temp = I915_READ(BXT_PORT_PLL(port, 3));
+	temp = I915_READ(BXT_PORT_PLL(phy, ch, 3));
 	temp &= ~PORT_PLL_M2_FRAC_ENABLE;
 	temp |= pll->config.hw_state.pll3;
-	I915_WRITE(BXT_PORT_PLL(port, 3), temp);
+	I915_WRITE(BXT_PORT_PLL(phy, ch, 3), temp);
 
 	/* Write coeff */
-	temp = I915_READ(BXT_PORT_PLL(port, 6));
+	temp = I915_READ(BXT_PORT_PLL(phy, ch, 6));
 	temp &= ~PORT_PLL_PROP_COEFF_MASK;
 	temp &= ~PORT_PLL_INT_COEFF_MASK;
 	temp &= ~PORT_PLL_GAIN_CTL_MASK;
 	temp |= pll->config.hw_state.pll6;
-	I915_WRITE(BXT_PORT_PLL(port, 6), temp);
+	I915_WRITE(BXT_PORT_PLL(phy, ch, 6), temp);
 
 	/* Write calibration val */
-	temp = I915_READ(BXT_PORT_PLL(port, 8));
+	temp = I915_READ(BXT_PORT_PLL(phy, ch, 8));
 	temp &= ~PORT_PLL_TARGET_CNT_MASK;
 	temp |= pll->config.hw_state.pll8;
-	I915_WRITE(BXT_PORT_PLL(port, 8), temp);
+	I915_WRITE(BXT_PORT_PLL(phy, ch, 8), temp);
 
-	temp = I915_READ(BXT_PORT_PLL(port, 9));
+	temp = I915_READ(BXT_PORT_PLL(phy, ch, 9));
 	temp &= ~PORT_PLL_LOCK_THRESHOLD_MASK;
 	temp |= pll->config.hw_state.pll9;
-	I915_WRITE(BXT_PORT_PLL(port, 9), temp);
+	I915_WRITE(BXT_PORT_PLL(phy, ch, 9), temp);
 
-	temp = I915_READ(BXT_PORT_PLL(port, 10));
+	temp = I915_READ(BXT_PORT_PLL(phy, ch, 10));
 	temp &= ~PORT_PLL_DCO_AMP_OVR_EN_H;
 	temp &= ~PORT_PLL_DCO_AMP_MASK;
 	temp |= pll->config.hw_state.pll10;
-	I915_WRITE(BXT_PORT_PLL(port, 10), temp);
+	I915_WRITE(BXT_PORT_PLL(phy, ch, 10), temp);
 
 	/* Recalibrate with new settings */
-	temp = I915_READ(BXT_PORT_PLL_EBB_4(port));
+	temp = I915_READ(BXT_PORT_PLL_EBB_4(phy, ch));
 	temp |= PORT_PLL_RECALIBRATE;
-	I915_WRITE(BXT_PORT_PLL_EBB_4(port), temp);
+	I915_WRITE(BXT_PORT_PLL_EBB_4(phy, ch), temp);
 	temp &= ~PORT_PLL_10BIT_CLK_ENABLE;
 	temp |= pll->config.hw_state.ebb4;
-	I915_WRITE(BXT_PORT_PLL_EBB_4(port), temp);
+	I915_WRITE(BXT_PORT_PLL_EBB_4(phy, ch), temp);
 
 	/* Enable PLL */
 	temp = I915_READ(BXT_PORT_PLL_ENABLE(port));
@@ -1459,11 +1463,11 @@ static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv,
 	 * While we write to the group register to program all lanes at once we
 	 * can read only lane registers and we pick lanes 0/1 for that.
 	 */
-	temp = I915_READ(BXT_PORT_PCS_DW12_LN01(port));
+	temp = I915_READ(BXT_PORT_PCS_DW12_LN01(phy, ch));
 	temp &= ~LANE_STAGGER_MASK;
 	temp &= ~LANESTAGGER_STRAP_OVRD;
 	temp |= pll->config.hw_state.pcsdw12;
-	I915_WRITE(BXT_PORT_PCS_DW12_GRP(port), temp);
+	I915_WRITE(BXT_PORT_PCS_DW12_GRP(phy, ch), temp);
 }
 
 static void bxt_ddi_pll_disable(struct drm_i915_private *dev_priv,
@@ -1485,6 +1489,10 @@ static bool bxt_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
 	enum port port = (enum port)pll->id;	/* 1:1 port->PLL mapping */
 	uint32_t val;
 	bool ret;
+	enum dpio_phy phy;
+	enum dpio_channel ch;
+
+	bxt_port_to_phy_channel(port, &phy, &ch);
 
 	if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS))
 		return false;
@@ -1495,36 +1503,36 @@ static bool bxt_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
 	if (!(val & PORT_PLL_ENABLE))
 		goto out;
 
-	hw_state->ebb0 = I915_READ(BXT_PORT_PLL_EBB_0(port));
+	hw_state->ebb0 = I915_READ(BXT_PORT_PLL_EBB_0(phy, ch));
 	hw_state->ebb0 &= PORT_PLL_P1_MASK | PORT_PLL_P2_MASK;
 
-	hw_state->ebb4 = I915_READ(BXT_PORT_PLL_EBB_4(port));
+	hw_state->ebb4 = I915_READ(BXT_PORT_PLL_EBB_4(phy, ch));
 	hw_state->ebb4 &= PORT_PLL_10BIT_CLK_ENABLE;
 
-	hw_state->pll0 = I915_READ(BXT_PORT_PLL(port, 0));
+	hw_state->pll0 = I915_READ(BXT_PORT_PLL(phy, ch, 0));
 	hw_state->pll0 &= PORT_PLL_M2_MASK;
 
-	hw_state->pll1 = I915_READ(BXT_PORT_PLL(port, 1));
+	hw_state->pll1 = I915_READ(BXT_PORT_PLL(phy, ch, 1));
 	hw_state->pll1 &= PORT_PLL_N_MASK;
 
-	hw_state->pll2 = I915_READ(BXT_PORT_PLL(port, 2));
+	hw_state->pll2 = I915_READ(BXT_PORT_PLL(phy, ch, 2));
 	hw_state->pll2 &= PORT_PLL_M2_FRAC_MASK;
 
-	hw_state->pll3 = I915_READ(BXT_PORT_PLL(port, 3));
+	hw_state->pll3 = I915_READ(BXT_PORT_PLL(phy, ch, 3));
 	hw_state->pll3 &= PORT_PLL_M2_FRAC_ENABLE;
 
-	hw_state->pll6 = I915_READ(BXT_PORT_PLL(port, 6));
+	hw_state->pll6 = I915_READ(BXT_PORT_PLL(phy, ch, 6));
 	hw_state->pll6 &= PORT_PLL_PROP_COEFF_MASK |
 			  PORT_PLL_INT_COEFF_MASK |
 			  PORT_PLL_GAIN_CTL_MASK;
 
-	hw_state->pll8 = I915_READ(BXT_PORT_PLL(port, 8));
+	hw_state->pll8 = I915_READ(BXT_PORT_PLL(phy, ch, 8));
 	hw_state->pll8 &= PORT_PLL_TARGET_CNT_MASK;
 
-	hw_state->pll9 = I915_READ(BXT_PORT_PLL(port, 9));
+	hw_state->pll9 = I915_READ(BXT_PORT_PLL(phy, ch, 9));
 	hw_state->pll9 &= PORT_PLL_LOCK_THRESHOLD_MASK;
 
-	hw_state->pll10 = I915_READ(BXT_PORT_PLL(port, 10));
+	hw_state->pll10 = I915_READ(BXT_PORT_PLL(phy, ch, 10));
 	hw_state->pll10 &= PORT_PLL_DCO_AMP_OVR_EN_H |
 			   PORT_PLL_DCO_AMP_MASK;
 
@@ -1533,11 +1541,11 @@ static bool bxt_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
 	 * can read only lane registers. We configure all lanes the same way, so
 	 * here just read out lanes 0/1 and output a note if lanes 2/3 differ.
 	 */
-	hw_state->pcsdw12 = I915_READ(BXT_PORT_PCS_DW12_LN01(port));
-	if (I915_READ(BXT_PORT_PCS_DW12_LN23(port)) != hw_state->pcsdw12)
+	hw_state->pcsdw12 = I915_READ(BXT_PORT_PCS_DW12_LN01(phy, ch));
+	if (I915_READ(BXT_PORT_PCS_DW12_LN23(phy, ch)) != hw_state->pcsdw12)
 		DRM_DEBUG_DRIVER("lane stagger config different for lane 01 (%08x) and 23 (%08x)\n",
 				 hw_state->pcsdw12,
-				 I915_READ(BXT_PORT_PCS_DW12_LN23(port)));
+				 I915_READ(BXT_PORT_PCS_DW12_LN23(phy, ch)));
 	hw_state->pcsdw12 &= LANE_STAGGER_MASK | LANESTAGGER_STRAP_OVRD;
 
 	ret = true;