Merge greg@deskfan:linux/BK/usb-new_drivers-2.6

into kroah.com:/home/greg/linux/BK/usb-new_drivers-2.6

CREDITS

@@ -2669,6 +2669,13 @@ S: Kasarmikatu 11 A4
 S: 70110 Kuopio
 S: Finland
 
+N: Luca Risolia
+E: luca_ing@libero.it
+D: V4L driver for W996[87]CF JPEG USB Dual Mode Camera Chip
+S: Via Libertà 41/a
+S: Osio Sotto, 24046, Bergamo
+S: Italy
+
 N: William E. Roadcap
 E: roadcapw@cfw.com
 W: http://www.cfw.com/~roadcapw
@@ -3569,4 +3576,4 @@ S: France
 # alphabetically. Leonard used to be very proud of being the 
 # last entry, and he'll get positively pissed if he can't even
 # be second-to-last.  (and this file really _is_ supposed to be
-# in alphabetic order) 
+# in alphabetic order)

MAINTAINERS

@@ -2212,6 +2212,13 @@ M:	dbrownell@users.sourceforge.net
 L:	linux-usb-devel@lists.sourceforge.net
 S:	Maintained
 
+USB W996[87]CF DRIVER
+P:	Luca Risolia
+M:	luca_ing@libero.it
+L:	linux-usb-devel@lists.sourceforge.net
+W:	http://go.lamarinapunto.com
+S:	Maintained
+
 USER-MODE LINUX
 P:	Jeff Dike
 M:	jdike@karaya.com

drivers/usb/Makefile

@@ -34,6 +34,7 @@ obj-$(CONFIG_USB_PWC)		+= media/
 obj-$(CONFIG_USB_SE401)		+= media/
 obj-$(CONFIG_USB_STV680)	+= media/
 obj-$(CONFIG_USB_VICAM)		+= media/
+obj-$(CONFIG_USB_W9968CF)	+= media/
 
 obj-$(CONFIG_USB_CATC)		+= net/
 obj-$(CONFIG_USB_KAWETH)	+= net/
@@ -58,4 +59,3 @@ obj-$(CONFIG_USB_SPEEDTOUCH)	+= misc/
 obj-$(CONFIG_USB_TEST)		+= misc/
 obj-$(CONFIG_USB_TIGL)		+= misc/
 obj-$(CONFIG_USB_USS720)	+= misc/
-

drivers/usb/core/usb.c

@@ -991,6 +991,7 @@ int usb_new_device(struct usb_device *dev, struct device *parent)
 	int err = -EINVAL;
 	int i;
 	int j;
+	int config;
 
 	/*
 	 * Set the driver for the usb device to point to the "generic" driver.
@@ -1108,18 +1109,30 @@ int usb_new_device(struct usb_device *dev, struct device *parent)
 
 	/* choose and set the configuration. that registers the interfaces
 	 * with the driver core, and lets usb device drivers bind to them.
+	 * NOTE:  should interact with hub power budgeting.
 	 */
+	config = dev->config[0].desc.bConfigurationValue;
 	if (dev->descriptor.bNumConfigurations != 1) {
+		for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
+			/* heuristic:  Linux is more likely to have class
+			 * drivers, so avoid vendor-specific interfaces.
+			 */
+			if (dev->config[i].interface[0]->altsetting
+						->desc.bInterfaceClass
+					== USB_CLASS_VENDOR_SPEC)
+				continue;
+			config = dev->config[i].desc.bConfigurationValue;
+			break;
+		}
 		dev_info(&dev->dev,
 			"configuration #%d chosen from %d choices\n",
-			dev->config[0].desc.bConfigurationValue,
+			config,
 			dev->descriptor.bNumConfigurations);
 	}
-	err = usb_set_configuration(dev,
-			dev->config[0].desc.bConfigurationValue);
+	err = usb_set_configuration(dev, config);
 	if (err) {
 		dev_err(&dev->dev, "can't set config #%d, error %d\n",
-			dev->config[0].desc.bConfigurationValue, err);
+			config, err);
 		goto fail;
 	}
 

drivers/usb/media/Kconfig

@@ -177,3 +177,30 @@ config USB_STV680
 	  To compile this driver as a module, choose M here: the
 	  module will be called stv680.
 
+config USB_W9968CF
+	tristate "USB W996[87]CF JPEG Dual Mode Camera support"
+	depends on USB && VIDEO_DEV && I2C
+	---help---
+	  Say Y here if you want support for cameras based on
+	  Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
+	
+	  This driver has an optional plugin, which is distributed as a
+	  separate module only (released under GPL). It contains code that 
+	  allows you to use higher resolutions and framerates, and can't
+	  be included into the official Linux kernel for performance 
+	  purposes.
+	  At the moment the driver needs a third-part module for the CMOS 
+	  sensors, which is available on internet: it is recommended to read
+	  <file:Documentation/usb/w9968cf.txt> for more informations and for
+	  a list of supported cameras.
+	
+	  This driver uses the Video For Linux and the I2C APIs. 
+	  You must say Y or M to both "Video For Linux" and 
+	  "I2C Support" to use this driver.
+	  Information on this API and pointers to "v4l" programs may be found
+	  on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+	
+	  This code is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called w9968cf.o. If you want to compile it as a
+	  module, say M here and read <file:Documentation/modules.txt>.

drivers/usb/media/Makefile

@@ -13,3 +13,4 @@ obj-$(CONFIG_USB_PWC)		+= pwc.o
 obj-$(CONFIG_USB_SE401)		+= se401.o
 obj-$(CONFIG_USB_STV680)	+= stv680.o
 obj-$(CONFIG_USB_VICAM)		+= vicam.o usbvideo.o
+obj-$(CONFIG_USB_W9968CF)	+= w9968cf.o

drivers/usb/media/w9968cf_decoder.h

+/***************************************************************************
+ * Video decoder for the W996[87]CF driver for Linux.                      *
+ *                                                                         *
+ * Copyright (C) 2003 by Luca Risolia <luca_ing@libero.it>                 *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#ifndef _W9968CF_DECODER_H_
+#define _W9968CF_DECODER_H_
+
+/* Comment/uncomment this for high/low quality of compressed video */
+#define W9968CF_DEC_FAST_LOWQUALITY_VIDEO
+
+#ifdef W9968CF_DEC_FAST_LOWQUALITY_VIDEO
+static const unsigned char Y_QUANTABLE[64] = {
+	16,  11,  10,  16,  24,  40,  51,  61,
+	12,  12,  14,  19,  26,  58,  60,  55,
+	14,  13,  16,  24,  40,  57,  69,  56,
+	14,  17,  22,  29,  51,  87,  80,  62,
+	18,  22,  37,  56,  68, 109, 103,  77,
+	24,  35,  55,  64,  81, 104, 113,  92,
+	49,  64,  78,  87, 103, 121, 120, 101,
+	72,  92,  95,  98, 112, 100, 103,  99
+};
+
+static const unsigned char UV_QUANTABLE[64] = {
+	17,  18,  24,  47,  99,  99,  99,  99,
+	18,  21,  26,  66,  99,  99,  99,  99,
+	24,  26,  56,  99,  99,  99,  99,  99,
+	47,  66,  99,  99,  99,  99,  99,  99,
+	99,  99,  99,  99,  99,  99,  99,  99,
+	99,  99,  99,  99,  99,  99,  99,  99,
+	99,  99,  99,  99,  99,  99,  99,  99,
+	99,  99,  99,  99,  99,  99,  99,  99
+};
+#else
+static const unsigned char Y_QUANTABLE[64] = {
+	 8,   5,   5,   8,  12,  20,  25,  30,
+	 6,   6,   7,   9,  13,  29,  30,  27,
+	 7,   6,   8,  12,  20,  28,  34,  28,
+	 7,   8,  11,  14,  25,  43,  40,  31,
+	 9,  11,  18,  28,  34,  54,  51,  38,
+	12,  17,  27,  32,  40,  52,  56,  46,
+	24,  32,  39,  43,  51,  60,  60,  50,
+	36,  46,  47,  49,  56,  50,  51,  49
+};
+
+static const unsigned char UV_QUANTABLE[64] = {
+	 8,   9,  12,  23,  49,  49,  49,  49,
+	 9,  10,  13,  33,  49,  49,  49,  49,
+	12,  13,  28,  49,  49,  49,  49,  49,
+	23,  33,  49,  49,  49,  49,  49,  49,
+	49,  49,  49,  49,  49,  49,  49,  49,
+	49,  49,  49,  49,  49,  49,  49,  49,
+	49,  49,  49,  49,  49,  49,  49,  49,
+	49,  49,  49,  49,  49,  49,  49,  49
+};
+#endif
+
+#define W9968CF_DEC_ERR_CORRUPTED_DATA  -1
+#define W9968CF_DEC_ERR_BUF_OVERFLOW    -2
+#define W9968CF_DEC_ERR_NO_SOI          -3
+#define W9968CF_DEC_ERR_NO_SOF0         -4
+#define W9968CF_DEC_ERR_NO_SOS          -5
+#define W9968CF_DEC_ERR_NO_EOI          -6
+
+extern void w9968cf_init_decoder(void);
+extern int w9968cf_check_headers(const unsigned char* Pin, 
+                                 const unsigned long BUF_SIZE);
+extern int w9968cf_decode(const char* Pin, const unsigned long BUF_SIZE, 
+                          const unsigned W, const unsigned H, char* Pout);
+
+#endif /* _W9968CF_DECODER_H_ */

drivers/usb/media/w9968cf_externaldef.h

+/***************************************************************************
+ * Various definitions for compatibility with external modules.            *
+ * This file is part of the W996[87]CF driver for Linux.                   *
+ *                                                                         *
+ * Copyright (C) 2002 2003 by Luca Risolia <luca_ing@libero.it>            *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#ifndef _W9968CF_EXTERNALDEF_H_
+#define _W9968CF_EXTERNALDEF_H_
+
+#include <linux/videodev.h>
+#include <linux/i2c.h>
+#include <asm/ioctl.h>
+#include <asm/types.h>
+
+/* The following values have been copied from the "ovcamchip" module. */
+
+#ifndef I2C_DRIVERID_OVCAMCHIP
+#	define I2C_DRIVERID_OVCAMCHIP   0xf00f
+#endif
+
+/* Controls */
+enum {
+	OVCAMCHIP_CID_CONT,       /* Contrast */
+	OVCAMCHIP_CID_BRIGHT,     /* Brightness */
+	OVCAMCHIP_CID_SAT,        /* Saturation */
+	OVCAMCHIP_CID_HUE,        /* Hue */
+	OVCAMCHIP_CID_EXP,        /* Exposure */
+	OVCAMCHIP_CID_FREQ,       /* Light frequency */
+	OVCAMCHIP_CID_BANDFILT,   /* Banding filter */
+	OVCAMCHIP_CID_AUTOBRIGHT, /* Auto brightness */
+	OVCAMCHIP_CID_AUTOEXP,    /* Auto exposure */
+	OVCAMCHIP_CID_BACKLIGHT,  /* Back light compensation */
+	OVCAMCHIP_CID_MIRROR,     /* Mirror horizontally */
+};
+
+/* I2C addresses */
+#define OV7xx0_SID   (0x42 >> 1)
+#define OV6xx0_SID   (0xC0 >> 1)
+
+/* Sensor types */
+enum {
+	CC_UNKNOWN,
+	CC_OV76BE,
+	CC_OV7610,
+	CC_OV7620,
+	CC_OV7620AE,
+	CC_OV6620,
+	CC_OV6630,
+	CC_OV6630AE,
+	CC_OV6630AF,
+};
+
+/* API */
+struct ovcamchip_control {
+	__u32 id;
+	__s32 value;
+};
+
+struct ovcamchip_window {
+	int x;
+	int y;
+	int width;
+	int height;
+	int format;
+	int quarter;   /* Scale width and height down 2x */
+
+	/* This stuff will be removed eventually */
+	int clockdiv;  /* Clock divisor setting */
+};
+
+/* Commands. 
+   You must call OVCAMCHIP_CMD_INITIALIZE before any of other commands */
+#define OVCAMCHIP_CMD_Q_SUBTYPE  _IOR  (0x88, 0x00, int)
+#define OVCAMCHIP_CMD_INITIALIZE _IOW  (0x88, 0x01, int)
+#define OVCAMCHIP_CMD_S_CTRL     _IOW  (0x88, 0x02, struct ovcamchip_control)
+#define OVCAMCHIP_CMD_G_CTRL     _IOWR (0x88, 0x03, struct ovcamchip_control)
+#define OVCAMCHIP_CMD_S_MODE     _IOW  (0x88, 0x04, struct ovcamchip_window)
+#define OVCAMCHIP_MAX_CMD        _IO   (0x88, 0x3f)
+
+#endif /* _W9968CF_EXTERNALDEF_H_ */

drivers/usb/misc/Kconfig

@@ -58,6 +58,18 @@ config USB_RIO500
 	  To compile this driver as a module, choose M here: the
 	  module will be called rio500.
 
+config USB_LEGOTOWER
+	tristate "USB Lego Infrared Tower support (EXPERIMENTAL)"
+	depends on USB && EXPERIMENTAL
+	help
+	  Say Y here if you want to connect a USB Lego Infrared Tower to your
+	  computer's USB port.
+
+	  This code is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called legousbtower. If you want to compile it as
+	  a module, say M here and read <file:Documentation/modules.txt>.
+
 config USB_BRLVGER
 	tristate "Tieman Voyager USB Braille display support (EXPERIMENTAL)"
 	depends on USB && EXPERIMENTAL

drivers/usb/misc/Makefile

@@ -12,3 +12,4 @@ obj-$(CONFIG_USB_SPEEDTOUCH)	+= speedtch.o
 obj-$(CONFIG_USB_TEST)		+= usbtest.o
 obj-$(CONFIG_USB_TIGL)		+= tiglusb.o
 obj-$(CONFIG_USB_USS720)	+= uss720.o
+obj-$(CONFIG_USB_LEGOTOWER)	+= legousbtower.o

drivers/usb/net/usbnet.c

@@ -637,6 +637,27 @@ static void ax8817x_get_drvinfo (struct net_device *net,
 	info->eedump_len = 0x3e;
 }
 
+static u32 ax8817x_get_link (struct net_device *net)
+{
+	struct usbnet *dev = (struct usbnet *)net->priv;
+
+	return (u32)mii_link_ok(&dev->mii);
+}
+
+static int ax8817x_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
+{
+	struct usbnet *dev = (struct usbnet *)net->priv;
+
+	return mii_ethtool_gset(&dev->mii,cmd);
+}
+
+static int ax8817x_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
+{
+	struct usbnet *dev = (struct usbnet *)net->priv;
+
+	return mii_ethtool_sset(&dev->mii,cmd);
+}
+
 static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret;
@@ -670,16 +691,6 @@ static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf)
 	}
 	memcpy(dev->net->dev_addr, buf, ETH_ALEN);
 
-	/* Get IPG values */
-	if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_IPG012, 0, 0, 3, buf)) < 0) {
-		dbg("Error reading IPG values: %d", ret);
-		return ret;
-	}
-
-	for(i = 0;i < 3;i++) {
-		ax8817x_write_cmd(dev, AX_CMD_WRITE_IPG0 + i, 0, 0, 1, &buf[i]);
-	}
-
 	/* Get the PHY id */
 	if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf)) < 0) {
 		dbg("error on read AX_CMD_READ_PHY_ID: %02x", ret);
@@ -735,9 +746,12 @@ static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->set_multicast_list = ax8817x_set_multicast;
 
 	usbnet_ethtool_ops.get_drvinfo = &ax8817x_get_drvinfo;
+	usbnet_ethtool_ops.get_link = &ax8817x_get_link;
 	usbnet_ethtool_ops.get_wol = &ax8817x_get_wol;
 	usbnet_ethtool_ops.set_wol = &ax8817x_set_wol;
 	usbnet_ethtool_ops.get_eeprom = &ax8817x_get_eeprom;
+	usbnet_ethtool_ops.get_settings = &ax8817x_get_settings;
+	usbnet_ethtool_ops.set_settings = &ax8817x_set_settings;
 
 	return 0;
 }

drivers/usb/serial/ftdi_sio.c

@@ -342,6 +342,10 @@ static struct usb_device_id id_table_8U232AM [] = {
 	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_8_PID, 0, 0x3ff) },
 	{ USB_DEVICE_VER(IDTECH_VID, IDTECH_IDT1221U_PID, 0, 0x3ff) },
 	{ USB_DEVICE_VER(OCT_VID, OCT_US101_PID, 0, 0x3ff) },
+	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_1, 0, 0x3ff) },
+	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_R2X0, 0, 0x3ff) },
+	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0, 0x3ff) },
+	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0, 0x3ff) },
 	{ }						/* Terminating entry */
 };
 
@@ -416,6 +420,10 @@ static struct usb_device_id id_table_FT232BM [] = {
 	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_8_PID, 0x400, 0xffff) },
 	{ USB_DEVICE_VER(IDTECH_VID, IDTECH_IDT1221U_PID, 0x400, 0xffff) },
 	{ USB_DEVICE_VER(OCT_VID, OCT_US101_PID, 0x400, 0xffff) },
+	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_1, 0x400, 0xffff) },
+	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_R2X0, 0x400, 0xffff) },
+	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0x400, 0xffff) },
+	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0x400, 0xffff) },
 	{ }						/* Terminating entry */
 };
 
@@ -505,6 +513,10 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_HE_TIRA1_PID, 0x400, 0xffff) },
 	{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID) },
+	{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) },
+	{ USB_DEVICE(FTDI_VID, PROTEGO_R2X0) },
+	{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) },
+	{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) },
 	{ }						/* Terminating entry */
 };
 

drivers/usb/serial/ftdi_sio.h

@@ -145,6 +145,14 @@
 /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
 #define OCT_US101_PID		0x0421	/* OCT US101 USB to RS-232 */
 
+/*
+ * Protego product ids
+ */
+#define PROTEGO_SPECIAL_1	0xFC70	/* special/unknown device */
+#define PROTEGO_R2X0		0xFC71	/* R200-USB TRNG unit (R210, R220, and R230) */
+#define PROTEGO_SPECIAL_3	0xFC72	/* special/unknown device */
+#define PROTEGO_SPECIAL_4	0xFC73	/* special/unknown device */ 
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */

include/linux/i2c-id.h

@@ -258,6 +258,7 @@
 #define I2C_HW_SMBUS_AMD8111	0x0a
 #define I2C_HW_SMBUS_SCX200	0x0b
 #define I2C_HW_SMBUS_NFORCE2	0x0c
+#define I2C_HW_SMBUS_W9968CF	0x0d
 
 /* --- ISA pseudo-adapter						*/
 #define I2C_HW_ISA 0x00

include/linux/videodev.h

@@ -429,6 +429,7 @@ struct video_code
 #define VID_HARDWARE_CPIA2	33
 #define VID_HARDWARE_VICAM      34
 #define VID_HARDWARE_SF16FMR2	35
+#define VID_HARDWARE_W9968CF	36	/* W996[87]CF JPEG USB Dual Mode Cam */
 #endif /* __LINUX_VIDEODEV_H */
 
 /*