Commit ed898d4f authored by Biju Das's avatar Biju Das Committed by Simon Horman

arm64: dts: renesas: r8a774a1: Add USB-DMAC and HSUSB device nodes

Add usb dmac and hsusb device nodes on RZ/G2M SoC dtsi.
Signed-off-by: default avatarBiju Das <biju.das@bp.renesas.com>
Reviewed-by: default avatarFabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent 4c2c2fb9
......@@ -596,6 +596,51 @@ hscif4: serial@e66b0000 {
status = "disabled";
};
hsusb: usb@e6590000 {
compatible = "renesas,usbhs-r8a774a1",
"renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 704>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc 32>;
resets = <&cpg 704>;
status = "disabled";
};
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a774a1-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc 32>;
resets = <&cpg 330>;
#dma-cells = <1>;
dma-channels = <2>;
};
usb_dmac1: dma-controller@e65b0000 {
compatible = "renesas,r8a774a1-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc 32>;
resets = <&cpg 331>;
#dma-cells = <1>;
dma-channels = <2>;
};
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a774a1",
"renesas,rcar-dmac";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment