ASoC: davinci-evm: Add device tree binding

Device tree support for Davinci Machine driver

When the board boots with device tree, the driver will receive card,
codec, dai interface details (like the card name, DAPM routing map,
phandle for the audio components described in the dts file, codec mclk
speed). The card will be set up based on this information. Since the
routing is provided via DT we can mark the card fully routed so core
can take care of disconnecting the unused pins.
Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Documentation/devicetree/bindings/sound/davinci-evm-audio.txt

+* Texas Instruments SoC audio setups with TLV320AIC3X Codec
+
+Required properties:
+- compatible : "ti,da830-evm-audio" : forDM365/DA8xx/OMAPL1x/AM33xx
+- ti,model : The user-visible name of this sound complex.
+- ti,audio-codec : The phandle of the TLV320AIC3x audio codec
+- ti,mcasp-controller : The phandle of the McASP controller
+- ti,codec-clock-rate : The Codec Clock rate (in Hz) applied to the Codec
+- ti,audio-routing : A list of the connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source. Valid names for sources and
+  sinks are the codec's pins, and the jacks on the board:
+
+  Board connectors:
+
+  * Headphone Jack
+  * Line Out
+  * Mic Jack
+  * Line In
+
+
+Example:
+
+sound {
+	compatible = "ti,da830-evm-audio";
+	ti,model = "DA830 EVM";
+	ti,audio-codec = <&tlv320aic3x>;
+	ti,mcasp-controller = <&mcasp1>;
+	ti,codec-clock-rate = <12000000>;
+	ti,audio-routing =
+		"Headphone Jack",       "HPLOUT",
+		"Headphone Jack",       "HPROUT",
+		"Line Out",             "LLOUT",
+		"Line Out",             "RLOUT",
+		"MIC3L",                "Mic Bias 2V",
+		"MIC3R",                "Mic Bias 2V",
+		"Mic Bias 2V",          "Mic Jack",
+		"LINE1L",               "Line In",
+		"LINE2L",               "Line In",
+		"LINE1R",               "Line In",
+		"LINE2R",               "Line In";
+};

sound/soc/davinci/davinci-evm.c

@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/platform_data/edma.h>
 #include <linux/i2c.h>
+#include <linux/of_platform.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
@@ -23,6 +24,8 @@
 #include <asm/dma.h>
 #include <asm/mach-types.h>
 
+#include <linux/edma.h>
+
 #include "davinci-pcm.h"
 #include "davinci-i2s.h"
 #include "davinci-mcasp.h"
@@ -121,13 +124,22 @@ static int evm_aic3x_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_codec *codec = rtd->codec;
 	struct snd_soc_dapm_context *dapm = &codec->dapm;
+	struct device_node *np = codec->card->dev->of_node;
+	int ret;
 
 	/* Add davinci-evm specific widgets */
 	snd_soc_dapm_new_controls(dapm, aic3x_dapm_widgets,
 				  ARRAY_SIZE(aic3x_dapm_widgets));
 
-	/* Set up davinci-evm specific audio path audio_map */
-	snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
+	if (np) {
+		ret = snd_soc_of_parse_audio_routing(codec->card,
+							"ti,audio-routing");
+		if (ret)
+			return ret;
+	} else {
+		/* Set up davinci-evm specific audio path audio_map */
+		snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
+	}
 
 	/* not connected */
 	snd_soc_dapm_disable_pin(dapm, "MONO_LOUT");
@@ -312,6 +324,98 @@ static struct snd_soc_card da850_snd_soc_card = {
 	.drvdata = &da850_snd_soc_card_drvdata,
 };
 
+#if defined(CONFIG_OF)
+
+/*
+ * The struct is used as place holder. It will be completely
+ * filled with data from dt node.
+ */
+static struct snd_soc_dai_link evm_dai_tlv320aic3x = {
+	.name		= "TLV320AIC3X",
+	.stream_name	= "AIC3X",
+	.codec_dai_name	= "tlv320aic3x-hifi",
+	.ops            = &evm_ops,
+	.init           = evm_aic3x_init,
+};
+
+static const struct of_device_id davinci_evm_dt_ids[] = {
+	{
+		.compatible = "ti,da830-evm-audio",
+		.data = (void *) &evm_dai_tlv320aic3x,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, davinci_evm_dt_ids);
+
+/* davinci evm audio machine driver */
+static struct snd_soc_card evm_soc_card = {
+	.owner = THIS_MODULE,
+	.num_links = 1,
+};
+
+static int davinci_evm_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *match =
+		of_match_device(of_match_ptr(davinci_evm_dt_ids), &pdev->dev);
+	struct snd_soc_dai_link *dai = (struct snd_soc_dai_link *) match->data;
+	struct snd_soc_card_drvdata_davinci *drvdata = NULL;
+	int ret = 0;
+
+	evm_soc_card.dai_link = dai;
+
+	dai->codec_of_node = of_parse_phandle(np, "ti,audio-codec", 0);
+	if (!dai->codec_of_node)
+		return -EINVAL;
+
+	dai->cpu_of_node = of_parse_phandle(np, "ti,mcasp-controller", 0);
+	if (!dai->cpu_of_node)
+		return -EINVAL;
+
+	dai->platform_of_node = dai->cpu_of_node;
+
+	evm_soc_card.dev = &pdev->dev;
+	ret = snd_soc_of_parse_card_name(&evm_soc_card, "ti,model");
+	if (ret)
+		return ret;
+
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
+	ret = of_property_read_u32(np, "ti,codec-clock-rate", &drvdata->sysclk);
+	if (ret < 0)
+		return -EINVAL;
+
+	snd_soc_card_set_drvdata(&evm_soc_card, drvdata);
+	ret = devm_snd_soc_register_card(&pdev->dev, &evm_soc_card);
+
+	if (ret)
+		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
+
+	return ret;
+}
+
+static int davinci_evm_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+	snd_soc_unregister_card(card);
+
+	return 0;
+}
+
+static struct platform_driver davinci_evm_driver = {
+	.probe		= davinci_evm_probe,
+	.remove		= davinci_evm_remove,
+	.driver		= {
+		.name	= "davinci_evm",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(davinci_evm_dt_ids),
+	},
+};
+#endif
+
 static struct platform_device *evm_snd_device;
 
 static int __init evm_init(void)
@@ -320,6 +424,15 @@ static int __init evm_init(void)
 	int index;
 	int ret;
 
+	/*
+	 * If dtb is there, the devices will be created dynamically.
+	 * Only register platfrom driver structure.
+	 */
+#if defined(CONFIG_OF)
+	if (of_have_populated_dt())
+		return platform_driver_register(&davinci_evm_driver);
+#endif
+
 	if (machine_is_davinci_evm()) {
 		evm_snd_dev_data = &dm6446_snd_soc_card_evm;
 		index = 0;
@@ -355,6 +468,13 @@ static int __init evm_init(void)
 
 static void __exit evm_exit(void)
 {
+#if defined(CONFIG_OF)
+	if (of_have_populated_dt()) {
+		platform_driver_unregister(&davinci_evm_driver);
+		return;
+	}
+#endif
+
 	platform_device_unregister(evm_snd_device);
 }