Commit ee37a457 authored by Artur Weber's avatar Artur Weber Committed by Krzysztof Kozlowski

ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards

Introduce support for the Galaxy Tab 3 8.0 series of boards:

 - Samsung Galaxy Tab 3 8.0 WiFi (SM-T310/lt01wifi)
 - Samsung Galaxy Tab 3 8.0 3G (SM-T311/lt013g)
 - Samsung Galaxy Tab 3 8.0 LTE (SM-T315/lt01lte)

What works:

 - Display and backlight
 - Touchscreen
 - GPIO buttons, hall sensor
 - WiFi and Bluetooth
 - USB, fuel gauge, charging
 - Accelerometer and magnetometer
 - Audio: speaker, microphone, headset
 - WiFi model only: light sensor
Signed-off-by: default avatarArtur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/20230714101229.30641-1-aweber.kernel@gmail.comSigned-off-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
parent 982655cb
...@@ -9,6 +9,9 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \ ...@@ -9,6 +9,9 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \
exynos4210-smdkv310.dtb \ exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \ exynos4210-trats.dtb \
exynos4210-universal_c210.dtb \ exynos4210-universal_c210.dtb \
exynos4212-tab3-3g8.dts \
exynos4212-tab3-lte8.dts \
exynos4212-tab3-wifi8.dts \
exynos4412-i9300.dtb \ exynos4412-i9300.dtb \
exynos4412-i9305.dtb \ exynos4412-i9305.dtb \
exynos4412-itop-elite.dtb \ exynos4412-itop-elite.dtb \
......
// SPDX-License-Identifier: GPL-2.0
/*
* Samsung's Exynos4212 based Galaxy Tab 3 8.0 3G board device tree
* source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*/
/dts-v1/;
#include "exynos4212-tab3.dtsi"
/ {
model = "Samsung Galaxy Tab 3 8.0 3G (SM-T311) based on Exynos4212";
compatible = "samsung,t311", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
chassis-type = "tablet";
};
/* Pin control sleep state overrides */
&sleep0 {
PIN_SLP(gpb-5, INPUT, UP);
};
&sleep1 {
PIN_SLP(gpl0-0, OUT0, NONE);
PIN_SLP(gpl1-0, OUT0, NONE);
PIN_SLP(gpl2-4, OUT0, NONE);
PIN_SLP(gpm3-3, OUT1, NONE);
};
// SPDX-License-Identifier: GPL-2.0
/*
* Samsung's Exynos4212 based Galaxy Tab 3 8.0 LTE board device tree
* source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*/
/dts-v1/;
#include "exynos4212-tab3.dtsi"
/ {
model = "Samsung Galaxy Tab 3 8.0 LTE (SM-T315) based on Exynos4212";
compatible = "samsung,t315", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
chassis-type = "tablet";
};
/* Pin control sleep state overrides */
&sleep0 {
PIN_SLP(gpa0-4, INPUT, UP);
PIN_SLP(gpa0-5, INPUT, UP);
PIN_SLP(gpb-5, INPUT, UP);
PIN_SLP(gpc0-0, PREV, NONE);
PIN_SLP(gpc1-3, INPUT, NONE);
PIN_SLP(gpf1-6, INPUT, NONE);
PIN_SLP(gpf2-2, PREV, NONE);
};
&sleep1 {
PIN_SLP(gpl0-0, PREV, NONE);
PIN_SLP(gpl1-0, PREV, NONE);
PIN_SLP(gpl2-1, INPUT, DOWN);
PIN_SLP(gpl2-2, INPUT, DOWN);
PIN_SLP(gpl2-4, OUT0, NONE);
PIN_SLP(gpl2-5, PREV, NONE);
PIN_SLP(gpm3-3, OUT1, NONE);
};
// SPDX-License-Identifier: GPL-2.0
/*
* Samsung's Exynos4212 based Galaxy Tab 3 8.0 WiFi board device tree
* source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*/
/dts-v1/;
#include "exynos4212-tab3.dtsi"
/ {
model = "Samsung Galaxy Tab 3 8.0 WiFi (SM-T310) based on Exynos4212";
compatible = "samsung,t310", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
chassis-type = "tablet";
};
&i2c_lightsensor {
status = "okay";
lightsensor@10 {
compatible = "capella,cm3323";
reg = <0x10>;
};
};
// SPDX-License-Identifier: GPL-2.0
/*
* Samsung's Exynos4212 based Galaxy Tab 3 board common source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*/
/dts-v1/;
#include "exynos4212.dtsi"
#include "exynos4412-ppmu-common.dtsi"
#include "exynos-mfc-reserved-memory.dtsi"
#include <dt-bindings/clock/samsung,s2mps11.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos-pinctrl.h"
/ {
compatible = "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
memory@40000000 {
device_type = "memory";
/*
* Technically 1.5GB is available, but the latter 512MB is handled
* in a special way by downstream (every second page is skipped),
* and thus doesn't initialize correctly on mainline. Only 1020M is
* used for now.
*/
reg = <0x40000000 0x3fc00000>;
};
aliases {
mmc0 = &mshc_0; /* Internal storage */
mmc1 = &sdhci_2; /* SD card */
mmc2 = &sdhci_3; /* WiFi */
};
chosen {
stdout-path = &serial_2;
/* Default S-BOOT bootloader loads initramfs here */
linux,initrd-start = <0x42000000>;
linux,initrd-end = <0x42800000>;
};
firmware@204f000 {
compatible = "samsung,secure-firmware";
reg = <0x0204F000 0x1000>;
};
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
clock-frequency = <0>;
};
xusbxti {
compatible = "samsung,clock-xusbxti";
clock-frequency = <24000000>;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys>;
key-power {
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power";
debounce-interval = <10>;
wakeup-source;
};
key-up {
gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
label = "volume down";
debounce-interval = <10>;
};
key-down {
gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
label = "volume up";
debounce-interval = <10>;
};
key-home {
gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
label = "home";
debounce-interval = <10>;
};
switch-hall-sensor {
gpios = <&gpx2 4 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
linux,can-disable;
label = "hall effect sensor";
debounce-interval = <10>;
wakeup-source;
};
};
led-touchkeys {
compatible = "regulator-led";
vled-supply = <&ldo20_reg>;
default-state = "off";
function = LED_FUNCTION_KBD_BACKLIGHT;
color = <LED_COLOR_ID_WHITE>;
};
i2c_max77693: i2c-gpio-1 {
compatible = "i2c-gpio";
sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
pmic@66 {
compatible = "maxim,max77693";
reg = <0x66>;
interrupt-parent = <&gpx1>;
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&max77693_irq>;
regulators {
esafeout1_reg: ESAFEOUT1 {
regulator-name = "ESAFEOUT1";
regulator-boot-on;
};
esafeout2_reg: ESAFEOUT2 {
regulator-name = "ESAFEOUT2";
};
charger_reg: CHARGER {
regulator-name = "CHARGER";
regulator-min-microamp = <60000>;
regulator-max-microamp = <2580000>;
regulator-boot-on;
};
};
charger {
compatible = "maxim,max77693-charger";
maxim,constant-microvolt = <4350000>;
maxim,min-system-microvolt = <3600000>;
maxim,thermal-regulation-celsius = <100>;
maxim,battery-overcurrent-microamp = <3500000>;
maxim,charge-input-threshold-microvolt = <4300000>;
};
};
};
i2c_max77693_fuel: i2c-gpio-2 {
compatible = "i2c-gpio";
sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
fuel-gauge@36 {
compatible = "maxim,max17050";
reg = <0x36>;
interrupt-parent = <&gpx2>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&max77693_fuel_irq>;
maxim,over-heat-temp = <500>;
maxim,over-volt = <4500>;
};
};
i2c_magnetometer: i2c-gpio-3 {
compatible = "i2c-gpio";
sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
magnetometer@2e {
compatible = "yamaha,yas532";
reg = <0x2e>;
iovdd-supply = <&ldo3_reg>;
mount-matrix = "-1", "0", "0",
"0", "1", "0",
"0", "0", "-1";
};
};
i2c_lightsensor: i2c-gpio-4 {
compatible = "i2c-gpio";
sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
/* WiFi model uses CM3323, 3G/LTE use CM36653 */
};
i2c_bl: i2c-gpio-5 {
compatible = "i2c-gpio";
sda-gpios = <&gpm4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpm4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
#address-cells = <1>;
#size-cells = <0>;
backlight: backlight@2c {
compatible = "ti,lp8556";
reg = <0x2c>;
bl-name = "lcd-bl";
dev-ctrl = /bits/ 8 <0x80>;
init-brt = /bits/ 8 <0x78>; /* 120 */
power-supply = <&vbatt_reg>;
enable-supply = <&backlight_reset_supply>;
pwms = <&pwm 1 78770 0>;
pwm-names = "lp8556";
rom-a3h {
rom-addr = /bits/ 8 <0xa3>;
rom-val = /bits/ 8 <0x5e>;
};
rom-a5h {
rom-addr = /bits/ 8 <0xa5>;
rom-val = /bits/ 8 <0x34>;
};
rom-a7h {
rom-addr = /bits/ 8 <0xa7>;
rom-val = /bits/ 8 <0xfa>;
};
};
};
vbatt_reg: voltage-regulator-1 {
compatible = "regulator-fixed";
regulator-name = "VBATT";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
backlight_reset_supply: voltage-regulator-2 {
compatible = "regulator-fixed";
regulator-name = "BACKLIGHT_ENVDDIO";
pinctrl-names = "default";
pinctrl-0 = <&backlight_reset>;
gpio = <&gpm0 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
display_3v3_supply: voltage-regulator-3 {
compatible = "regulator-fixed";
regulator-name = "DISPLAY_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_en>;
gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; /* LCD_EN */
enable-active-high;
};
mic_bias_reg: voltage-regulator-4 {
compatible = "regulator-fixed";
regulator-name = "MICBIAS_LDO_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
submic_bias_reg: voltage-regulator-5 {
compatible = "regulator-fixed";
regulator-name = "SUB_MICBIAS_LDO_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
sound: sound {
compatible = "samsung,midas-audio";
model = "TAB3";
mic-bias-supply = <&mic_bias_reg>;
submic-bias-supply = <&submic_bias_reg>;
samsung,audio-routing =
"HP", "HPOUT1L",
"HP", "HPOUT1R",
"SPK", "SPKOUTLN",
"SPK", "SPKOUTLP",
"SPK", "SPKOUTRN",
"SPK", "SPKOUTRP",
"RCV", "HPOUT2N",
"RCV", "HPOUT2P",
"LINE", "LINEOUT2N",
"LINE", "LINEOUT2P",
"HDMI", "LINEOUT1N",
"HDMI", "LINEOUT1P",
"IN2LP:VXRN", "MICBIAS1",
"IN2LN", "MICBIAS1",
"Main Mic", "MICBIAS1",
"IN1RP", "MICBIAS2",
"IN1RN", "MICBIAS2",
"Sub Mic", "MICBIAS2",
"IN1LP", "Headset Mic",
"IN1LN", "Headset Mic";
cpu {
sound-dai = <&i2s0 0>;
};
codec {
sound-dai = <&wm1811>;
};
};
wlan_pwrseq: sdhci3-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
clocks = <&s5m8767_osc S2MPS11_CLK_BT>;
clock-names = "ext_clock";
};
};
&bus_acp {
devfreq = <&bus_dmc>;
status = "okay";
};
&bus_c2c {
devfreq = <&bus_dmc>;
status = "okay";
};
&bus_display {
devfreq = <&bus_leftbus>;
status = "okay";
};
&bus_dmc {
devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
vdd-supply = <&buck1_reg>;
status = "okay";
};
&bus_fsys {
devfreq = <&bus_leftbus>;
status = "okay";
};
&bus_leftbus {
devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
vdd-supply = <&buck3_reg>;
status = "okay";
};
&bus_mfc {
devfreq = <&bus_leftbus>;
status = "okay";
};
&bus_peri {
devfreq = <&bus_leftbus>;
status = "okay";
};
&bus_rightbus {
devfreq = <&bus_leftbus>;
status = "okay";
};
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
&cpu_thermal {
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 7 7>, <&cpu1 7 7>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 13 13>, <&cpu1 13 13>;
};
};
};
&dsi_0 {
vddcore-supply = <&ldo8_reg>;
vddio-supply = <&ldo10_reg>;
samsung,burst-clock-frequency = <500000000>;
samsung,esc-clock-frequency = <20000000>;
samsung,pll-clock-frequency = <24000000>;
status = "okay";
panel@0 {
compatible = "samsung,lsl080al02", "samsung,s6d7aa0";
reg = <0>;
power-supply = <&display_3v3_supply>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_nrst>;
reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>;
backlight = <&backlight>;
};
};
&exynos_usbphy {
vbus-supply = <&esafeout1_reg>;
status = "okay";
};
&fimd {
status = "okay";
};
&gpu {
mali-supply = <&buck4_reg>;
status = "okay";
};
&hsotg {
vusb_d-supply = <&ldo15_reg>;
vusb_a-supply = <&ldo12_reg>;
dr_mode = "otg";
status = "okay";
};
&i2c_1 {
pinctrl-0 = <&i2c1_bus>;
pinctrl-names = "default";
status = "okay";
lis3dh: accelerometer@19 {
/* K2DH seems to be the same as lis2dh12 in terms of registers */
compatible = "st,lis2dh12-accel";
reg = <0x19>;
interrupt-parent = <&gpx0>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&ldo17_reg>;
vddio-supply = <&ldo3_reg>;
mount-matrix = "-1", "0", "0",
"0", "1", "0",
"0", "0", "-1";
};
};
&i2c_3 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
samsung,i2c-max-bus-freq = <400000>;
pinctrl-0 = <&i2c3_bus>;
pinctrl-names = "default";
status = "okay";
touchscreen@48 {
/* MELFAS MMS252, using MMS114 compatible for now */
compatible = "melfas,mms114";
reg = <0x48>;
interrupt-parent = <&gpb>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
touchscreen-size-x = <800>;
touchscreen-size-y = <1280>;
avdd-supply = <&ldo21_reg>;
vdd-supply = <&ldo25_reg>;
linux,keycodes = <KEY_MENU KEY_BACK>;
};
};
&i2c_4 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
samsung,i2c-max-bus-freq = <100000>;
pinctrl-0 = <&i2c4_bus>;
pinctrl-names = "default";
status = "okay";
wm1811: audio-codec@1a {
compatible = "wlf,wm1811";
reg = <0x1a>;
clocks = <&pmu_system_controller 0>;
clock-names = "MCLK1";
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&gpx3>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
#sound-dai-cells = <0>;
wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0
0x0 0x8000 0x0 0x0 0x0>;
wlf,micbias-cfg = <0x25 0x2f>;
wlf,lineout1-feedback;
wlf,lineout1-se;
wlf,lineout2-se;
wlf,ldoena-always-driven;
AVDD2-supply = <&ldo3_reg>;
CPVDD-supply = <&ldo3_reg>;
DBVDD1-supply = <&ldo3_reg>;
DBVDD2-supply = <&ldo3_reg>;
DBVDD3-supply = <&ldo3_reg>;
SPKVDD1-supply = <&vbatt_reg>;
SPKVDD2-supply = <&vbatt_reg>;
wlf,ldo1ena-gpios = <&gpm4 4 GPIO_ACTIVE_HIGH>;
wlf,ldo2ena-gpios = <&gpm4 4 GPIO_ACTIVE_HIGH>;
};
};
&i2c_7 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
samsung,i2c-max-bus-freq = <100000>;
pinctrl-0 = <&i2c7_bus>;
pinctrl-names = "default";
status = "okay";
s5m8767: pmic@66 {
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
interrupt-parent = <&gpx0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
wakeup-source;
s5m8767,pmic-buck-default-dvs-idx = <1>;
s5m8767,pmic-buck-dvs-gpios = <&gpm3 0 GPIO_ACTIVE_HIGH>,
<&gpm3 1 GPIO_ACTIVE_HIGH>,
<&gpm3 2 GPIO_ACTIVE_HIGH>;
s5m8767,pmic-buck-ds-gpios = <&gpf3 1 GPIO_ACTIVE_HIGH>,
<&gpf3 2 GPIO_ACTIVE_HIGH>,
<&gpf3 3 GPIO_ACTIVE_HIGH>;
s5m8767,pmic-buck2-dvs-voltage = <1100000>, <1100000>,
<1100000>, <1100000>,
<1100000>, <1100000>,
<1100000>, <1100000>;
s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
<1100000>, <1100000>,
<1100000>, <1100000>,
<1100000>, <1100000>;
s5m8767,pmic-buck4-dvs-voltage = <1100000>, <1100000>,
<1100000>, <1100000>,
<1100000>, <1100000>,
<1100000>, <1100000>;
regulators {
ldo1_reg: LDO1 {
regulator-name = "VALIVE_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
ldo2_reg: LDO2 {
regulator-name = "VM1M2_1.2V_AP";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
ldo3_reg: LDO3 {
regulator-name = "VCC_1.8V_AP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
op_mode = <1>;
};
ldo5_reg: LDO5 {
regulator-name = "VCC_3.3V_MHL";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
op_mode = <1>;
};
ldo8_reg: LDO8 {
regulator-name = "VMIPI_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
op_mode = <3>;
};
ldo9_reg: LDO9 {
regulator-name = "VSIL_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
op_mode = <1>;
};
ldo10_reg: LDO10 {
regulator-name = "VMIPI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
op_mode = <3>;
};
ldo12_reg: LDO12 {
regulator-name = "VUOTG_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
op_mode = <1>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo13_reg: LDO13 {
regulator-name = "VCC_1.8V_MHL";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
op_mode = <1>;
};
ldo15_reg: LDO15 {
regulator-name = "VHSIC_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
op_mode = <1>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
ldo17_reg: LDO17 {
regulator-name = "VCC_2.8V_AP";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
op_mode = <1>;
regulator-always-on;
};
ldo19_reg: LDO19 {
regulator-name = "VLED_IC_1.9V";
regulator-min-microvolt = <1900000>;
regulator-max-microvolt = <1900000>;
op_mode = <1>;
regulator-always-on;
};
ldo20_reg: LDO20 {
regulator-name = "VTOUCH_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
op_mode = <1>;
};
ldo21_reg: LDO21 {
regulator-name = "TSP_VDD_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
op_mode = <1>;
};
ldo22_reg: LDO22 {
regulator-name = "5M_AF_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
op_mode = <1>;
};
ldo23_reg: LDO23 {
regulator-name = "VTF_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
op_mode = <3>;
};
ldo24_reg: LDO24 {
regulator-name = "LEDA_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
op_mode = <1>;
};
ldo25_reg: LDO25 {
regulator-name = "TSP_VDD_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
op_mode = <1>;
};
ldo26_reg: LDO26 {
regulator-name = "CAM_IO_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
op_mode = <1>;
};
ldo27_reg: LDO27 {
regulator-name = "VTCAM_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
op_mode = <1>;
};
buck1_reg: BUCK1 {
regulator-name = "VDD_MIF";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
op_mode = <3>;
};
buck2_reg: BUCK2 {
regulator-name = "VDD_ARM";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
op_mode = <3>;
};
buck3_reg: BUCK3 {
regulator-name = "VDD_INT";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
op_mode = <3>;
};
buck4_reg: BUCK4 {
regulator-name = "VDD_G3D";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
op_mode = <3>;
};
buck5_reg: BUCK5 {
regulator-name = "VMEM_1.2V_AP";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
buck6_reg: BUCK6 {
regulator-name = "CAM_ISP_CORE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
op_mode = <1>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
s5m8767_osc: clocks {
compatible = "samsung,s5m8767-clk";
#clock-cells = <1>;
clock-output-names = "en32khz_ap",
"en32khz_cp",
"en32khz_bt";
};
};
};
&i2s0 {
pinctrl-0 = <&i2s0_bus>;
pinctrl-names = "default";
status = "okay";
};
&mshc_0 {
broken-cd;
non-removable;
card-detect-delay = <200>;
vmmc-supply = <&ldo22_reg>;
clock-frequency = <400000000>;
samsung,dw-mshc-ciu-div = <0>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
pinctrl-names = "default";
bus-width = <8>;
cap-mmc-highspeed;
mmc-ddr-1_8v;
status = "okay";
};
&pinctrl_0 {
pinctrl-names = "default";
pinctrl-0 = <&sleep0>;
lcd_en: lcd-en-pins {
samsung,pins = "gpc0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
lcd_nrst: lcd-nrst-pins {
samsung,pins = "gpf0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
s5m8767_ds: s5m8767-ds-pins {
samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
sleep0: sleep-state {
PIN_SLP(gpa0-0, INPUT, NONE);
PIN_SLP(gpa0-1, OUT0, NONE);
PIN_SLP(gpa0-2, INPUT, NONE);
PIN_SLP(gpa0-3, INPUT, UP);
PIN_SLP(gpa0-4, INPUT, DOWN);
PIN_SLP(gpa0-5, INPUT, DOWN);
PIN_SLP(gpa0-6, INPUT, DOWN);
PIN_SLP(gpa0-7, INPUT, DOWN);
PIN_SLP(gpa1-0, INPUT, DOWN);
PIN_SLP(gpa1-1, INPUT, DOWN);
PIN_SLP(gpa1-2, INPUT, DOWN);
PIN_SLP(gpa1-3, INPUT, DOWN);
PIN_SLP(gpa1-4, INPUT, DOWN);
PIN_SLP(gpa1-5, INPUT, DOWN);
PIN_SLP(gpb-0, INPUT, NONE);
PIN_SLP(gpb-1, INPUT, NONE);
PIN_SLP(gpb-2, INPUT, NONE);
PIN_SLP(gpb-3, INPUT, NONE);
PIN_SLP(gpb-4, INPUT, DOWN);
PIN_SLP(gpb-5, INPUT, DOWN);
PIN_SLP(gpb-6, INPUT, DOWN);
PIN_SLP(gpb-7, INPUT, DOWN);
PIN_SLP(gpc0-0, INPUT, DOWN);
PIN_SLP(gpc0-1, INPUT, DOWN);
PIN_SLP(gpc0-2, INPUT, NONE);
PIN_SLP(gpc0-3, INPUT, NONE);
PIN_SLP(gpc0-4, INPUT, NONE);
PIN_SLP(gpc1-0, INPUT, DOWN);
PIN_SLP(gpc1-1, INPUT, DOWN);
PIN_SLP(gpc1-2, INPUT, DOWN);
PIN_SLP(gpc1-3, INPUT, DOWN);
PIN_SLP(gpc1-4, INPUT, DOWN);
PIN_SLP(gpd0-0, INPUT, DOWN);
PIN_SLP(gpd0-1, OUT0, NONE);
PIN_SLP(gpd0-2, INPUT, NONE);
PIN_SLP(gpd0-3, INPUT, NONE);
PIN_SLP(gpd1-0, INPUT, DOWN);
PIN_SLP(gpd1-1, INPUT, DOWN);
PIN_SLP(gpd1-2, INPUT, NONE);
PIN_SLP(gpd1-3, INPUT, NONE);
PIN_SLP(gpf0-0, INPUT, DOWN);
PIN_SLP(gpf0-1, INPUT, DOWN);
PIN_SLP(gpf0-2, INPUT, DOWN);
PIN_SLP(gpf0-3, INPUT, DOWN);
PIN_SLP(gpf0-4, OUT0, NONE);
PIN_SLP(gpf0-5, OUT0, NONE);
PIN_SLP(gpf0-6, INPUT, DOWN);
PIN_SLP(gpf0-7, INPUT, DOWN);
PIN_SLP(gpf1-0, INPUT, DOWN);
PIN_SLP(gpf1-1, INPUT, DOWN);
PIN_SLP(gpf1-2, INPUT, DOWN);
PIN_SLP(gpf1-3, INPUT, DOWN);
PIN_SLP(gpf1-4, INPUT, DOWN);
PIN_SLP(gpf1-5, INPUT, DOWN);
PIN_SLP(gpf1-6, INPUT, DOWN);
PIN_SLP(gpf1-7, INPUT, DOWN);
PIN_SLP(gpf2-0, INPUT, DOWN);
PIN_SLP(gpf2-1, INPUT, DOWN);
PIN_SLP(gpf2-2, INPUT, DOWN);
PIN_SLP(gpf2-3, INPUT, DOWN);
PIN_SLP(gpf2-4, INPUT, DOWN);
PIN_SLP(gpf2-5, INPUT, DOWN);
PIN_SLP(gpf2-6, INPUT, DOWN);
PIN_SLP(gpf2-7, INPUT, DOWN);
PIN_SLP(gpf3-0, INPUT, DOWN);
PIN_SLP(gpf3-1, INPUT, DOWN);
PIN_SLP(gpf3-2, INPUT, DOWN);
PIN_SLP(gpf3-3, INPUT, DOWN);
PIN_SLP(gpf3-4, PREV, NONE);
PIN_SLP(gpf3-5, OUT0, DOWN);
PIN_SLP(gpj0-0, INPUT, DOWN);
PIN_SLP(gpj0-1, INPUT, DOWN);
PIN_SLP(gpj0-2, INPUT, DOWN);
PIN_SLP(gpj0-3, OUT0, NONE);
PIN_SLP(gpj0-4, INPUT, DOWN);
PIN_SLP(gpj0-5, INPUT, DOWN);
PIN_SLP(gpj0-6, OUT0, NONE);
PIN_SLP(gpj0-7, OUT0, NONE);
PIN_SLP(gpj1-0, OUT0, NONE);
PIN_SLP(gpj1-1, INPUT, DOWN);
PIN_SLP(gpj1-2, PREV, NONE);
PIN_SLP(gpj1-3, INPUT, DOWN);
PIN_SLP(gpj1-4, INPUT, DOWN);
};
};
&pinctrl_1 {
pinctrl-names = "default";
pinctrl-0 = <&sleep1>;
bt_shutdown: bt-shutdown-pins {
samsung,pins = "gpl0-6";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
bt_host_wakeup: bt-host-wakeup-pins {
samsung,pins = "gpx2-6";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
bt_device_wakeup: bt-device-wakeup-pins {
samsung,pins = "gpx3-1";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
backlight_reset: backlight-reset-pins {
samsung,pins = "gpm0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
gpio_keys: gpio-keys-pins {
samsung,pins = "gpx1-2", "gpx2-2", "gpx2-4", "gpx2-7", "gpx3-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
max77693_irq: max77693-irq-pins {
samsung,pins = "gpx1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
max77693_fuel_irq: max77693-fuel-irq-pins {
samsung,pins = "gpx2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
sdhci2_cd: sdhci2-cd-irq-pins {
samsung,pins = "gpx3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
s5m8767_dvs: s5m8767-dvs-pins {
samsung,pins = "gpm3-0", "gpm3-1", "gpm3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
s5m8767_irq: s5m8767-irq-pins {
samsung,pins = "gpx0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
sleep1: sleep-state {
PIN_SLP(gpk0-0, PREV, NONE);
PIN_SLP(gpk0-1, PREV, NONE);
PIN_SLP(gpk0-2, PREV, NONE);
PIN_SLP(gpk0-3, PREV, NONE);
PIN_SLP(gpk0-4, PREV, NONE);
PIN_SLP(gpk0-5, PREV, NONE);
PIN_SLP(gpk0-6, PREV, NONE);
PIN_SLP(gpk1-0, INPUT, DOWN);
PIN_SLP(gpk1-1, INPUT, DOWN);
PIN_SLP(gpk1-2, INPUT, DOWN);
PIN_SLP(gpk1-3, PREV, NONE);
PIN_SLP(gpk1-4, PREV, NONE);
PIN_SLP(gpk1-5, PREV, NONE);
PIN_SLP(gpk1-6, PREV, NONE);
PIN_SLP(gpk2-0, INPUT, DOWN);
PIN_SLP(gpk2-1, INPUT, DOWN);
PIN_SLP(gpk2-2, INPUT, DOWN);
PIN_SLP(gpk2-3, INPUT, DOWN);
PIN_SLP(gpk2-4, INPUT, DOWN);
PIN_SLP(gpk2-5, INPUT, DOWN);
PIN_SLP(gpk2-6, INPUT, DOWN);
PIN_SLP(gpk3-0, OUT0, NONE);
PIN_SLP(gpk3-1, INPUT, NONE);
PIN_SLP(gpk3-2, INPUT, DOWN);
PIN_SLP(gpk3-3, INPUT, NONE);
PIN_SLP(gpk3-4, INPUT, NONE);
PIN_SLP(gpk3-5, INPUT, NONE);
PIN_SLP(gpk3-6, INPUT, NONE);
PIN_SLP(gpl0-0, INPUT, DOWN);
PIN_SLP(gpl0-1, INPUT, NONE);
PIN_SLP(gpl0-2, INPUT, NONE);
PIN_SLP(gpl0-3, INPUT, DOWN);
PIN_SLP(gpl0-4, INPUT, DOWN);
PIN_SLP(gpl0-6, PREV, NONE);
PIN_SLP(gpl1-0, INPUT, DOWN);
PIN_SLP(gpl1-1, OUT0, NONE);
PIN_SLP(gpl2-0, INPUT, DOWN);
PIN_SLP(gpl2-1, PREV, NONE);
PIN_SLP(gpl2-2, PREV, NONE);
PIN_SLP(gpl2-3, INPUT, DOWN);
PIN_SLP(gpl2-4, INPUT, DOWN);
PIN_SLP(gpl2-5, INPUT, DOWN);
PIN_SLP(gpl2-6, INPUT, DOWN);
PIN_SLP(gpl2-7, INPUT, DOWN);
PIN_SLP(gpm0-0, PREV, NONE);
PIN_SLP(gpm0-1, OUT0, NONE);
PIN_SLP(gpm0-2, INPUT, DOWN);
PIN_SLP(gpm0-3, INPUT, DOWN);
PIN_SLP(gpm0-4, INPUT, DOWN);
PIN_SLP(gpm0-5, INPUT, DOWN);
PIN_SLP(gpm0-6, INPUT, DOWN);
PIN_SLP(gpm0-7, INPUT, DOWN);
PIN_SLP(gpm1-0, INPUT, DOWN);
PIN_SLP(gpm1-1, INPUT, DOWN);
PIN_SLP(gpm1-2, INPUT, NONE);
PIN_SLP(gpm1-3, INPUT, NONE);
PIN_SLP(gpm1-4, INPUT, NONE);
PIN_SLP(gpm1-5, INPUT, NONE);
PIN_SLP(gpm1-6, OUT0, NONE);
PIN_SLP(gpm2-0, INPUT, NONE);
PIN_SLP(gpm2-1, INPUT, NONE);
PIN_SLP(gpm2-2, OUT0, NONE);
PIN_SLP(gpm2-3, INPUT, DOWN);
PIN_SLP(gpm2-4, INPUT, DOWN);
PIN_SLP(gpm3-0, PREV, NONE);
PIN_SLP(gpm3-1, PREV, NONE);
PIN_SLP(gpm3-2, PREV, NONE);
PIN_SLP(gpm3-3, INPUT, DOWN);
PIN_SLP(gpm3-4, INPUT, DOWN);
PIN_SLP(gpm3-5, PREV, NONE);
PIN_SLP(gpm3-6, INPUT, DOWN);
PIN_SLP(gpm3-7, OUT0, NONE);
PIN_SLP(gpm4-0, INPUT, DOWN);
PIN_SLP(gpm4-1, INPUT, DOWN);
PIN_SLP(gpm4-2, INPUT, DOWN);
PIN_SLP(gpm4-3, INPUT, DOWN);
PIN_SLP(gpm4-4, PREV, NONE);
PIN_SLP(gpm4-5, INPUT, NONE);
PIN_SLP(gpm4-6, INPUT, DOWN);
PIN_SLP(gpm4-7, INPUT, DOWN);
PIN_SLP(gpy0-0, INPUT, DOWN);
PIN_SLP(gpy0-1, INPUT, DOWN);
PIN_SLP(gpy0-2, INPUT, NONE);
PIN_SLP(gpy0-3, INPUT, NONE);
PIN_SLP(gpy0-4, INPUT, DOWN);
PIN_SLP(gpy0-5, INPUT, DOWN);
PIN_SLP(gpy1-0, INPUT, DOWN);
PIN_SLP(gpy1-1, INPUT, DOWN);
PIN_SLP(gpy1-2, INPUT, DOWN);
PIN_SLP(gpy1-3, INPUT, DOWN);
PIN_SLP(gpy2-0, PREV, NONE);
PIN_SLP(gpy2-1, INPUT, DOWN);
PIN_SLP(gpy2-2, INPUT, NONE);
PIN_SLP(gpy2-3, INPUT, NONE);
PIN_SLP(gpy2-4, INPUT, NONE);
PIN_SLP(gpy2-5, INPUT, NONE);
PIN_SLP(gpy3-0, INPUT, DOWN);
PIN_SLP(gpy3-1, INPUT, DOWN);
PIN_SLP(gpy3-2, INPUT, DOWN);
PIN_SLP(gpy3-3, INPUT, DOWN);
PIN_SLP(gpy3-4, INPUT, DOWN);
PIN_SLP(gpy3-5, INPUT, DOWN);
PIN_SLP(gpy3-6, INPUT, DOWN);
PIN_SLP(gpy3-7, INPUT, DOWN);
PIN_SLP(gpy4-0, INPUT, DOWN);
PIN_SLP(gpy4-1, INPUT, DOWN);
PIN_SLP(gpy4-2, INPUT, DOWN);
PIN_SLP(gpy4-3, INPUT, DOWN);
PIN_SLP(gpy4-4, INPUT, DOWN);
PIN_SLP(gpy4-5, INPUT, DOWN);
PIN_SLP(gpy4-6, INPUT, DOWN);
PIN_SLP(gpy4-7, INPUT, DOWN);
PIN_SLP(gpy5-0, INPUT, DOWN);
PIN_SLP(gpy5-1, INPUT, DOWN);
PIN_SLP(gpy5-2, INPUT, DOWN);
PIN_SLP(gpy5-3, INPUT, DOWN);
PIN_SLP(gpy5-4, INPUT, DOWN);
PIN_SLP(gpy5-5, INPUT, DOWN);
PIN_SLP(gpy5-6, INPUT, DOWN);
PIN_SLP(gpy5-7, INPUT, DOWN);
PIN_SLP(gpy6-0, INPUT, DOWN);
PIN_SLP(gpy6-1, INPUT, DOWN);
PIN_SLP(gpy6-2, INPUT, DOWN);
PIN_SLP(gpy6-3, INPUT, DOWN);
PIN_SLP(gpy6-4, INPUT, DOWN);
PIN_SLP(gpy6-5, INPUT, DOWN);
PIN_SLP(gpy6-6, INPUT, DOWN);
PIN_SLP(gpy6-7, INPUT, DOWN);
};
};
&pinctrl_2 {
pinctrl-names = "default";
pinctrl-0 = <&sleep2>;
sleep2: sleep-state {
PIN_SLP(gpz-0, INPUT, DOWN);
PIN_SLP(gpz-1, INPUT, DOWN);
PIN_SLP(gpz-2, INPUT, DOWN);
PIN_SLP(gpz-3, INPUT, DOWN);
PIN_SLP(gpz-4, INPUT, DOWN);
PIN_SLP(gpz-5, INPUT, DOWN);
PIN_SLP(gpz-6, INPUT, DOWN);
};
};
&pinctrl_3 {
pinctrl-names = "default";
pinctrl-0 = <&sleep3>;
sleep3: sleep-state {
PIN_SLP(gpv0-0, INPUT, DOWN);
PIN_SLP(gpv0-1, INPUT, DOWN);
PIN_SLP(gpv0-2, INPUT, DOWN);
PIN_SLP(gpv0-3, INPUT, DOWN);
PIN_SLP(gpv0-4, INPUT, DOWN);
PIN_SLP(gpv0-5, INPUT, DOWN);
PIN_SLP(gpv0-6, INPUT, DOWN);
PIN_SLP(gpv0-7, INPUT, DOWN);
PIN_SLP(gpv1-0, INPUT, DOWN);
PIN_SLP(gpv1-1, INPUT, DOWN);
PIN_SLP(gpv1-2, INPUT, DOWN);
PIN_SLP(gpv1-3, INPUT, DOWN);
PIN_SLP(gpv1-4, INPUT, DOWN);
PIN_SLP(gpv1-5, INPUT, DOWN);
PIN_SLP(gpv1-6, INPUT, DOWN);
PIN_SLP(gpv1-7, INPUT, DOWN);
PIN_SLP(gpv2-0, INPUT, DOWN);
PIN_SLP(gpv2-1, INPUT, DOWN);
PIN_SLP(gpv2-2, INPUT, DOWN);
PIN_SLP(gpv2-3, INPUT, DOWN);
PIN_SLP(gpv2-4, INPUT, DOWN);
PIN_SLP(gpv2-5, INPUT, DOWN);
PIN_SLP(gpv2-6, INPUT, DOWN);
PIN_SLP(gpv2-7, INPUT, DOWN);
PIN_SLP(gpv3-0, INPUT, DOWN);
PIN_SLP(gpv3-1, INPUT, DOWN);
PIN_SLP(gpv3-2, INPUT, DOWN);
PIN_SLP(gpv3-3, INPUT, DOWN);
PIN_SLP(gpv3-4, INPUT, DOWN);
PIN_SLP(gpv3-5, INPUT, DOWN);
PIN_SLP(gpv3-6, INPUT, DOWN);
PIN_SLP(gpv3-7, INPUT, DOWN);
PIN_SLP(gpv4-0, INPUT, DOWN);
PIN_SLP(gpv4-1, INPUT, DOWN);
};
};
&pmu_system_controller {
assigned-clocks = <&pmu_system_controller 0>;
assigned-clock-parents = <&clock CLK_XUSBXTI>;
};
&pwm {
pinctrl-0 = <&pwm1_out>;
pinctrl-names = "default";
samsung,pwm-outputs = <1>;
status = "okay";
};
/*
* The internal RTC does not work; instead, the RTC provided by the
* S5M8766 PMIC is used. Disable the RTC to make sure the working
* one gets used.
*
* We add this node to avoid DTB check warnings, as the Exynos4 RTC
* requires two clocks, and only one is set up by default.
*/
&rtc {
clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
status = "disabled";
};
&sdhci_2 {
bus-width = <4>;
cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
pinctrl-names = "default";
vmmc-supply = <&ldo23_reg>;
status = "okay";
};
&sdhci_3 {
#address-cells = <1>;
#size-cells = <0>;
non-removable;
bus-width = <4>;
mmc-pwrseq = <&wlan_pwrseq>;
pinctrl-names = "default";
pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
status = "okay";
brcmf: wifi@1 {
compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpx2>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
};
};
&serial_0 {
pinctrl-0 = <&uart0_data &uart0_fctl>;
pinctrl-names = "default";
status = "okay";
bluetooth {
compatible = "brcm,bcm4330-bt"; /* BCM4334B0 */
pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
pinctrl-names = "default";
max-speed = <3000000>;
shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
clocks = <&s5m8767_osc S2MPS11_CLK_BT>;
};
};
&serial_1 {
status = "okay";
};
&serial_2 {
status = "okay";
};
&serial_3 {
status = "okay";
};
&tmu {
vtmu-supply = <&ldo10_reg>;
status = "okay";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment